Novacryl Photopolymer Product Webinar Series
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Novacryl Photopolymer Product Webinar Series
Webinar Objectives
What is photopolymer
Novacryl Designer Series
Photopolymer
Specs and Continuing Education
Working Together
The purpose of Accessibility Codes is to allow a person with a physical disability to
independently get to, enter, and use a site, facility, building, or element.
- ICC/ANSI A117.1
Understanding Photopolymer The Process and Benefits
Drying
STEP 4
Dry the moisture off the material. The photopolymer and the base PETG does not absorb moisture during the washout - drying is to evaporate any standing moisture left on the sheet.
Post Exposure
STEP 5
Post exposure is a second exposure to fully cure, harden and activate the photpolymer. This is the final step in processing photopolymer.
STEPprocess of makingphotopolymer signage:5
PHOTOPOLYMER SIGNSHOW TO MAKE
5 Easy Steps
Contact With Flim Negative
STEP 1
The first step is to place a high density film negative on top of the photopolymer sheet.
Note: This shows how the Braille will appear after the top coating.
Exposure with UV Light
STEP 2
There is a bank of UV lamps that shine down and pass through the clear areas of the film negative and expose the photopolymer material.
Wash in Plain Tap Water
STEP 3
The unexposed photopolymer gets washed away during the washout process in plain tap water.
The photopolymer effluent is 100% biodegrad-able and goes right down the drain. You are left with the exposed raised images.
Photopolymer & Productivity
Over 400 signs
Vandal Resistent Tactile
Adhesive Bond
Chemical Bond
Compliant Braille and Tactile
Decorative Elements
Environmentally Conscious
Recycled Content Biodegradable
Recyclable LEED Points
Novacryl Photopolymer Substrates The Designer Series
Novacryl PT Series
Novacryl® PT Series Attributes •Clear PETG Base •PETG contains a minimum of 40% recycled content •Matte Non-Glare Finish •Available in 8 Gauge – 020, 040, 060, 080, 118, 190,
236, 375 •.032” Moisture resistant photopolymer layer •Sheet are available in 19”x25” sheet. •PT-118 and PT-236 are available in 30”x40” as well
10Division
Novacryl ECR Series
Novacryl® ECR Series Attributes • 3form Varia Ecoresin PETG Base • PETG contains a minimum of 40% recycled content • Patterns consist of natural organics and various materials • Matte Non-Glare Finish • Available in 4 Gauge – 060, 118, 236, 375 • .032” Moisture resistant photopolymer layer • Sheet are available in 19”x24” sheet • All material is made to order – 3-4 weeks for delivery
Novacryl LP Series
Novacryl® LP Series Attributes • Laminate Base consisting of either Wilsonart, Pionite or
Formica • Pattern or finish must have a matte finish • Gauge of the Novacryl LP sheet is approx 1/8” • .032” Moisture resistant photopolymer layer • Sheet are available in 19”x24” sheet. • All material is made to order – 3-4 weeks for delivery
Novacryl YA Series
Novacryl® YA Series Attributes • Brushed Aluminum Base • Aluminum Gauge is 0.16” • .032” Moisture resistant photopolymer layer • Sheet are available in 19”x25” sheet.
Novacryl EX Series
Novacryl® EX Series Attributes • Aluminum Base • Aluminum Gauge is 0.14” • .032” Exterior synthetic rubber polymer blend • Polymer has 0% swell rate and absorbs no moisture • Sheet are available in 20”x30” sheet.
Novacryl Permaglow Series
Novacryl® Permaglow Series Attributes • Photoluminescent Base • Photoluminescent Gauge is 0.44” • .032” Moisture resistant photopolymer layer • Sheet are available in 19”x25” sheet.
Specs & Continuing Education The Process
3-part CSI Specs
Accessibility & The ADA 2010 Standard (SAD) For Room Identification SignsProgram # 2010 Standard | Provider # K325
AIA CES Provider
On-site Education
Nova Polymers, Inc. Who We Are & How We Work Together
Just In Time Manufacturing
8 Global Locations
NovaPolymers.com | +1 888.484.NOVA
Related Documents
