8/11/2019 2014 Training Schedule.pdf http://slidepdf.com/reader/full/2014-training-schedulepdf 1/20 NCCCO Certication Courses Mobile Crane Operator Overhead Crane Operator Qualied Signal Person Qualied Rigger Level 1 Qualied Rigger Level 2 Mobile Crane Inspector Overhead Crane Inspector Forklift Operator Aerial Lift Operator Rigging Inspector Pedestal Crane Inspector Professional Operator Developme Accredited U.S. Dept. of Labor 29 CFR Part 1919 2014 800.521.7669 www.cranetech.com Serving the Material Handling Industry Since 1977 Superior Service Quality Training Reliable Resu Safety through Educat Training Schedule Programs Available Crane Tech fully endorses the national certication program offered by the National Commission for the Certication of Crane Operators (NCCCO), and will prepare candidates for the CCO certication examinations. Scan with your mobile device to check programs and specials !
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
In recent years, requirements for training and qualicaons rapidly evolved introducing strict ne
requirements. Crane Tech remains at the forefront of these developments, oering customers a wid
variety of operator qualicaon and cercaon opons. We connually invest in the developme
of new programs and methods, exploring the latest technologies, and seng industry standards wi
the most advanced training and evaluang soluons.
Whether you’re interested in Open Enrollment training at one of our locaons, or our highly eecvOn-Site training, Crane Tech is your ideal source. We back up our service with a deep knowledge bas
unsurpassed customer service, and more than thirty seven years in the material handling trainin
and inspecon eld.
ContentsCourse Title Page
On-Site Training ...........................................................................4
On-Site NCCCO Cered Training ................................................5
* Mobile Crane Professional Operator Development .................6
* Cered Mobile Crane Operator NCCCO .................................7
† Mobile Crane Operator (3-day) ................................................8
* † Mobile Crane Operator (4-day) Hands-On ............................8* † Mobile Crane Inspector .........................................................9
Crane Tech’s commitment to the Naonal Commission for the Cercaon of Crane Operato
(NCCCO) began in the mid 1990’s and remains strong today. We volunteer hundreds of man hou
annually to various NCCCO commiees, as well as hosng numerous NCCCO commiee and tasforce meengs over these many years. We are a proud NCCCO Planum sponsor, and our compan
is represented by membership on several NCCCO commiees and the NCCCO Commission.
Our commitment to the NCCCO ensures each cercaon course provided is properly oriented fo
NCCCO tesng. We will ensure your personnel are up to the NCCCO test challenge by providing
fundamental safety course that covers all subjects domains. Each course is presented by instructo
who are NCCCO Cered operators and NCCCO Accredited praccal examiners.
Persons who successfully complete Crane Tech programs are beer equipped to make posiv
decisions regarding safety and control of their equipment. We believe that it’s not how well on
does on a test, but how well one can maintain an accident free job site long term.
Crane Tech is prepared to help you gain cercaon and has a detailed process that takes you ste
by-step from iniang your NCCCO applicaon to achieving cercaon.
• Signal Person ........................... (parcipated on the task force)
• Rigger Level 1 ................................... (serve on the commiee)
• Rigger Level 2 ................................... (serve on the commiee)
• Mobile Crane Operator .................... (serve on the commiee)
• Arculang Crane Operator. ............ (serve on the commiee)
• Digger Derrick Operator ................... (serve on the commiee)
• Overhead Crane Operator................ (serve on the commiee)
• Crane Inspector ....................... (parcipated on the task force)
• Li Director ............................. (parcipated on the task force)
Crane Tech’s Service on NCCCO Commiees
Crane Tech has a full me sta dedicated to help our customers gain NCCCO cercaon.
We complete all applicaons and paperwork, walking you through the enre process.
If you need crane operators and need them fast, Crane Tech’s Mobile Crane Professional Operat
Development program puts operators on track. Professional Development training provides th
knowledge and skills to become an NCCCO cered crane operator with extended training th
details each of the subjects necessary for this professional trade. As a bonus, you will receive traininand tesng required by OSHA to become a Qualied Rigger.
For one low price you have the opportunity to gain the qualicaons and cercaons neede
to work where OSHA and employers demand NCCCO cercaon. And, because of the extende
topics of li planning, crane inspecon, personnel handling, and assembly/disassembly, you w
return to work capable of lling the vital role of crane operator.
Training conducted at Crane Tech’s Tampa Training Center includes hands-on operaon of mobi
cranes and extended training necessary to provide a thorough understanding that’s necessary fo
safe and ecient crane operaon.
15 day ....... Course 4002 ....... $2,995
Tampa, FL....................January 13-31
Tampa, FL........................ March 3-21
Tampa, FL................. April 28-May 16
Tampa, FL............................July 7-25
Tampa, FL...................October 13-31
Tampa, FL.................. December 1-19
Course Locaons & Dates
Mobile crane operaon safety
Crane set-up and ground stability
Load chart exercises and workshops
Operator aids and LMI's
Crane component inspecon
Wire rope: types & inspecon
Crane operaon: set-up and driving skills
Hands-on load control training
Li planning
Crane assembly and disassembly
Standards and regulaons
Emergency procedures
Mobile Crane Operator manual
Qualied Rigger Level 1 manual
OSHA 1926 Subpart CC manual
ASME B30.5
Plus references and course
materials too numerous to list.
Course Topics Include
What You Will Receive
PPE listed on page 3 is
required for this program.
Week 1: 4-day mobile operator training with 1-dahands-on training - plus Qualied Rigger Leve1 training and tesng to meet OSHA §1926Subpart CC requirements.
Week 2: Combined mobile crane hands-on traininand technical training for load charts, rangediagrams, crane set-up, li planning, hydraulisystems, wire rope inspecon, regulaons,pre-operaonal inspecon and operaontechniques.
Week 3: NCCCO Cercaon Test prep training thincludes all fees for: Core exam, two specialtyexams, and one praccal exam.
Crane Tech has provided NCCCO Cered programs for 15-years. Our programs place primaremphasis on the four knowledge domains specied under NCCCO guidelines. Candidates learwhat's required for safe crane operaon then pracce for tesng with tests of the same contenand structure as provided for cercaon.
For those who may need extra me learning the subjects or me praccing on a mobile crane wstrongly recommend aending our Mobile Crane Operator or Professional Operator Developmencourse. Each instructor for these programs is an NCCCO cered operator and expert trainer.
With several NCCCO licensed praccal examiners on sta, your program can be delivered at th
site of your choice. Read more about Crane Tech's NCCCO commitment on page 5 of this schedule
Crane Tech fully endorses the national
certication program offered by the
National Commission for the Certication
of Crane Operators (NCCCO), and
will prepare candidates for the CCO
certication examinations.
*Price includes core exam, two specialty written exams and one TSS or TLL practical exam. Additional specialty exams and practical exams may be added.
Crane Tech is a proud NCCCO Planum Sponsor
Course Locaons & Dates
3 day .....Course 3608 .....$1,895*
Tampa, FL................ January 27-31
Tampa, FL.................. March 17-21
Tampa, FL......................May 12-16
Tampa, FL.......................July 21-25
Tampa, FL................October 27-31
Tampa, FL............ December 15-19
The 3-day technical prep
course is scheduled for
Mon-Tues-Wed followed
by NCCCO wrien and
praccal examinaons on
Thursday and Friday.
PPE listed on page 3 is
required for this program.
Crane Tech has a full me sta dedicated to help our customers complete applicaons and necessar
paperwork for cercaon. We do all the ling and walk you step-by-step through the process.
To Inquire Call Toll Free 800.521.7669
To Enroll Call 800.521.766
Ask about our NCCCO Study Reference Kit for this program.
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 8/20Train-the-Trainer is available for this program
Crane operaonal characteriscs
Frequent and periodic inspecons
How to read and apply load charts
How to use a range diagram
Quadrants of operaon
Reeving and line pull
Proper mobile crane set-up
Evaluang ground and soil stability
Outriggers and pad loading
Use of jibs and extensions
Mobile Crane Operator
2 & 3 Day Course Locaons 3 Day Course Locaons
Mobile Crane Operator Training is designed for operators, safety personnel, and supervisors of a
types of Mobile Cranes. Training thoroughly covers cranes regulated by OSHA, MSHA, API and ASM
B30.5. You will learn crical elements that include; operaonal characteriscs, load charts, prop
set-up, use of jibs and extensions, load indicang devices, crane stability, structural competenc
pre-use and periodic inspecons, hazard awareness, power line hazards, operator responsibilie
job planning, with extensive workshop interacon.
Three day courses are oered at all locaons. Those wishing to receive hands-on operator trainin
should aend the 4-day course at our Tampa Training Center.
Course Topics Include
Stability vs structural competence
Evaluang the load
Wire rope types and inspecon
Accident prevenon and root cause
How to determine load weight
Eects of side loading
Power line contact prevenon
Crane hands signals
Personnel liing
OSHA/ASME compliance
Course Locaons & Dates
3 day ........ Operator Training ......................Course 1002 ..........$895
4 day ......... Operator Hands-On ...................Course 4003 ........$1095
3 day ......... Train-the-Trainer .......................Course 3612 .......$1,395
4 day ......... Train-the-Trainer Hands-on........Course 3587 .......$1,895
Tampa, FL.................. January 13-16
Tampa, FL........................ March 3-6
Tampa, FL............... April 28 - May 1
Tampa, FL.......................... July 7-10
Tampa, FL................. October 13-16
Tampa, FL..................December 1-4
Houston, TX .......... February 10 - 12
Houston, TX ...................... April 7-9
Houston, TX ...................... June 2-4
Houston, TX...................August 6-8
Baton Rouge, LA ....... August 18-20
Houston, TX ............... October 8-10
Accidents don't happen by chance, they are a consequence of unsafe pracces.
PPE listed on page 3 is required for
Tampa Training Center programs.
Suitable for Operators, Supervisors,
and Safety Personnel.
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 9/20To Inquire or Enroll Call Toll Free 800.521.7669
Mobile Crane Inspector
Machine size and characteriscs
Operaonal modes
Major and minor components
Capacity and limitaons
Periodic inspecons objecves
Hazard awareness
Accident prevenon
Crane failures and prevenon
Mobile Crane Inspector training is an in-depth program designed for anyone responsible for mobi
crane inspecon, equipment reliability, loss control, and equipment management. Learn cran
inspecons and OSHA compliance from a company with more than four decades of OSHA accredite
compliance inspecon experience. When aending at our Tampa Training Center you will spenme hands-on inspecng cranes.
Parcipant Materials Include
OSHA §1926 Subpart CC Manual, Mobile Crane Inspector Manual, Li Equipment Basics,
Guide to OSHA (includes general industry standards).
Qualied Signal Person training ensures you meet current OSHA §1926 Subpart CC requiremen
as a qualied person. This is a dynamic program that has rapidly become one of our most popula
courses. Federal OSHA §1926.1428 requires that persons who signal cranes in construco
acvies receive training and tesng to be a qualied signal person. This program is 4-hours oclassroom instrucon with one wrien exam followed by individual praccal exams.
Many training dates are scheduled back-to-back with
Qualied Rigger Level 1 programs. Aend both courses and save!
Tampa, FL.......................January 9Houston, TX ................ January 16
New Orleans, LA ......... January 20
Houston, TX .............. February 13
Tampa, FL ................. February 18
New Orleans, LA ........... March 13
Tampa, FL ..................... March 24
Houston, TX .......................April 1
Lafayee, LA ....................April 21
Tampa, FL ........................April 21
Houston, TX ....................... June 5
Terminology of the new standard
Crane characteriscs & limitaons
Signal person responsibilies
When is a signal person required
Hand, voice, and audible signals
Working around power lines
Step and touch potenal
Clearance requirements for cranes
Tampa, FL ........................ June 24Houston, TX ..................... June 27
Houston, TX ................... August 4
Tampa, FL .................... August 12
Baton Rouge, LA .......... August 21
Tampa, FL .............. September 22
Houston, TX ................October 13
Lafayee, LA .............November 3
Houston, TX ............November 11
Tampa, FL ...............November 24
Course Topics Include
Train-the-Trainer is available for this program
Reacon to power line contact
Keeping clear of the load (Fall zone)
Requirements of §1926 Subpart CC
Dangers of side loading
Crane dynamics
Dangers of two-blocking
Causes of mobile crane pping
Causes of structural failures
This course provides signal persons the knowledge of crane dynamics
and operaon that’s required by §1926 Subpart CC.
Course Locaons & Dates
1 day ............ Signal Person .................Course 3902 .............. $595
1 day ............. Train-the-Trainer ...........Course 3910 ........... $1,395
When aending our Tampa Training Center learn hands-on
with rigging acvies that reinforces your skills.
Wire rope slings
Synthec slings
Chain slings
Liing beams & spreader bars
Come-a-longs & lever hoists
Shackles
Hooks
Pre-use inspecon
Houston, TX ............ January 29-30
Houston, TX .......... February 24-25
Baton Rouge, LA ... February 27-28
Houston, TX ..................... April 2-3
Houston, TX ................. June 25-26
Houston, TX ........ November 12-13
Aend as a Train-the-Trainer program and receive all the materials and skillsnecessary to provide this training at your facility.
Qualied Rigger Level 2 training provides the knowledge and skills necessary for a person to work a
a journeyman level rigger. This course prepares persons to perform rigging calculaons and to sele
and apply rigging for safe controlled load handling. Persons compleng this training will understan
their responsibility to ensure proper rigging methods are used and that all variables which coulresult in a rigging failure are accounted for through planning and proper selecon of gear. Trainin
sases the qualicaon requirements for OSHA §1926, §1910, and other required qualicaons
Train-the-Trainer is available for this program
Sling rangs
Sling angle stress
Sling applicaon
Sling selecon
Rigging gear selecon
Rigger/personnel safety
And, much more...
Course Topics Include
Tampa, FL...............February 19-21
Tampa, FL....................... April 9-11
Tampa ........................... June 25-27
Tampa, FL...................August 13-15
Tampa, FL...................October 8-10
Course Locaons & Dates
2 day ........ Rigger Training ........................Course 4004 .......... $795
3 day ....... Rigger Hands-on ......................Course 3940 .......... $995
2 day ........ Train-the-Trainer .....................Course 3615 ....... $1,595
3 day ........ Train-the-Trainer Hands-on ......Course 4007 ....... $1,895
If you have been wanng to improve your rigging inspecon skills, then this program is the mo
comprehensive in the industry. We start with a wide assortment of slings and rigging gear wi
varying degrees of damage and deciencies that allows parcipants to learn inspecon hands-o
Rigging Inspector training provides technical and hands-on training in an environment unique in thmaterial handling eld. You will learn the principles and standards specic to rigging gear and slin
inspecons. This program has a compliance basis under OSHA, ASME & API industry standards an
specic to state and government agency requirements where applicable.
To Enroll Call Toll Free 800.521.7669
R igging Inspector
Course topics include
Wire rope types and inspecon
Chain sling inspecon
Synthec sling inspecon
Hook and shackle inspecon
Rings and link inspecon
Eye bolts and hoist ring inspecon
Plate clamp and beam clamp inspecon
Hand chain and lever hoist inspecon
Below-the-hook liing devices
Sling tags and capacity markings
Proper inspecon techniques
Compliance OSHA/ASME & API
Common causes of rigging damage
Record keeping requirements
Use of inspecon tools
Course Locaons & Dates3 day ..........Course 3525 ........... $1,195