PUMPS POLLARD PUMPS EST MEMBRE DU GROUPE IPI • WWW.GROUP-IPI.COM • Goupe IPI • SAS au capital de 2 448 550,00 € • SIREN 517 799 755 RCS TOULON • NAF 6420Z CONSTRUCTEUR ET SPÉCIALISTE DE LA POMPE VOLUMÉTRIQUE POLLARD conçoit et réalise des pompes volumétriques adaptées aux problèmatiques spécifiques de ses clients industriels. En plus de soixante ans, Pollard a assis sa réputation en développant des produits toujours plus fiables, performants et innovants. CATALOGUE
43
Embed
2014 english catalogue compressé - group-ipi. · PDF fileMP 25 37 MP 40 60 1 ... These are mobile supply drum drainers equipped with pumps ... This system for fully opening drum is
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PUMPS
POLLARD PUMPS EST MEMBRE DU GROUPE IPI • WWW.GROUP-IPI.COM • Goupe IPI • SAS au capital de 2 448 550,00 € • SIREN 517 799 755 RCS TOULON • NAF 6420Z
CONSTRUCTEUR ET SPÉCIALISTE DE LA POMPE VOLUMÉTRIQUE POLLARD conçoit et réalise des pompes volumétriques adaptées aux problèmatiques spécifiques de ses clients industriels. En plus de soixante ans, Pollard a assis sa réputation en développant
des produits toujours plus fiables, performants et innovants.
CATALOGUE
2
3
Table POLLARD History .............................................................................................. 4 POLLARD Technology ....................................................................................... 5 Technical department ....................................................................................... 6 Pump-range .................................................................................................... 8 Motorpump-range .......................................................................................... 17 Drum drainers ................................................................................................ 28 Special products ............................................................................................. 37 FAQ............................................................................................................... 42 Contact us ..................................................................................................... 43
4
POLLARDHISTORY
A young engineer trained at the Arts and Métiers engineering School, Jean POLLARD filed the patent which would see the birth of the "CMtec" technology pump in the mid‐1940s. The first factory, built close to Paris, was soon running and the first clients were the Railways, manufacturers of machine tools and the steel industry. In 1963, the factory was transferred to Sanary in the South of France, between Toulon and Marseille. For 35 years the company developed under the management of Jean POLLARD who left the company for health reasons in 1976. The Pollard brand became a reference in the world of the industrial volumetric pump. In 1997 the current management took over the company, and since then it has developed the three following product ranges: ‐ a range of pumps and motor‐pumps ‐ a range of drum drainers ‐ a range of special products The company's current strategy puts the emphasis on commercial reactivity in response to French or international demand and on the ability of our design office to adapt our products technically, if necessary, to meet clients' specific requirements.
Inaugurated in 2004, the brand new factory at Signes (Var) with its modern production equipment and optimised systems (ISO 9001) has allowed us to increase production capacity and to achieve delivery times for all the range that are among the shortest in the industry.
Multi‐axis turning center + robot Vertical milling center + robot Pompes Pollard is today appreciated by its clients for its flexibility and its ability to offer "tailor‐made" pumping systems in both short and long production runs.
5
POLLARDTECHNOLOGY
6
TECHNICALDEPARTMENT
Our development strategy is based on our ability to develop products rapidly in cooperation with the client to perfectly meet his needs. Our design office's mission is the technical adaptation of our pumps to tailor them to the client's specific requirements. We develop "niche" markets by automating or sometimes simplifying even previously manual functions.
Below a few examples of pumps tailor‐made by our design office:
Special motor‐pumps for supplying diesel to locomotives for passenger transport.
Atex Motor‐pumps with packing sealing to transfer chemical products within painting machines.
Micro‐Motorpumps with high rotation speeds, special compact design, for the lubrication, immersed or not.
Special pumps used to pump worn oil within industrial friers.
Coupling of two hydraulic pumps with different flow rates and pressures onto the same motor‐pump.
Special pumps for water plus glycol, highly silencious and with magnetic coupling, used in the cooling down process of machining tools.
Self‐contained pumping unit with a thermal motor to feed bees out in the open.
PUMPS
POLLARD PUMPS EST MEMBRE DU GROUPE IPI • WWW.GROUP-IPI.COM • Goupe IPI • SAS au capital de 2 448 550,00 € • SIREN 517 799 755 RCS TOULON • NAF 6420Z
POMPES ET MOTOPOMPESPUMPS AND MOTOR PUMPS / PUMPEN UND MOTORPUMPEN /
BOMBAS Y MOTOBOMBAS / 普通泵和电动泵 / насосы и мотопомпы
8
PUMP‐RANGE PRESENTATION
SKETCH (mechanical seal)
Ref Flow
in L/min at 1 500 rpm
Connections Option available Sealing‐type Shaft end
MMP 70‐140‐200 Max discharge 200 L/hour Max work pressure 5 bar Special compact pumps 188 x 122 mm
MP 01‐MP 06 Max discharge 680 L/hour Max work pressure 10 bar Optional extra: PLN version, reverse plus system packing or magnetic seal By‐pass
MP 10‐MP 25 Max discharge 2 300 L/hour Max pressure 10 bar Optional extra: PLN version, reverse plus system packing or magnetic seal By‐pass
MP 40‐MP 67 Max discharge 6 000 L/hour Max pressure 10 bar Optional extra: PLN version, reverse plus system packing or magnetic seal By‐pass
MP 82‐MP 142 Max discharge 12 000 L/hour Max pressure 5 bar Optional extra : By‐pass
MP 258‐MP 516 Max discharge 30 000 L/hour Max pressure 5 bar Optional extra : By‐pass
18
MOTORPUMPS
SKETCH
( mechanical seal)
Ref Motorpumps
Flow in L/h at 1 500rpm
Power in KW (standard is 5 bar)
Connections By‐pass (option)
MMP 70 1,1 40w (built‐in)
100w (built‐in)
G 1/4'' No MMP 140 2,4
MMP 200 3
MP 01 2,4 0,37 kW G 3/8''
serial MP 02 3
MP 04 6 0,37 kW G 1/2''
MP 06 9
MP 10 15
0,75 kW G 1'' Yes MP 16 24
MP 25 37
MP 40 60 1,1 kW
G 1''1/4 Yes
MP 60 90 1,5 kW
MP 82 116 2.2 kW
G 2'' Yes
MP 95 133
3 kW
MP 107 150
MP 118 166
MP 130 185
MP 142 200
MP 258 250 7.5 kW
DN 80 Yes MP 344 333
11 kW MP 431 416
MP 516 500
The motor pumps are fitted with multi‐tension /multi frequencies:
230‐400V 50HZ 255‐440V 60HZ
240‐415V 50HZ 265‐460V 60HZ
280‐480V 60HZ
19
jmcrousse
Rectangle
20
21
22
23
24
25
26
PUMPS
POLLARD PUMPS EST MEMBRE DU GROUPE IPI • WWW.GROUP-IPI.COM • Goupe IPI • SAS au capital de 2 448 550,00 € • SIREN 517 799 755 RCS TOULON • NAF 6420Z
VIDE-FÛTSVACUUM-DRUMS / ASSENTLEERUNGSANLAGEN /
BOMBAS Y MOTOBOMBAS / 真空泵 / ВаКУУмныЕ БоЧКи
28
DRUMEMPTIERPRODUCTS
29
DRUM DRAINER PUMPS:
Complete range of mobile or static drum drainer pumps for very fluid to very viscous products, from manual hydraulic pumps to very sophisticated metering systems.
adaptation of the CM tec positive‐displacement technology to each of our drum drainers
tailor‐made product designed to give good value for money
The main advantages of Pollard drum drainers:
exclusive CM tec technology on each of our drum drainers
products pumped from very fluid to very viscous
static or mobile unit
designed to give value for money, even on the spares
robust product designed for intensive use
filling option with ultra‐precise metering system
self‐priming
tailored to clients' needs, developed with their design offices
Manual drum drainer Max discharge 1200 liter/hour Self priming
Trolley drum drainer Max discharge 5 900 liter/hour Max pressure : 20 bar Mobile unit Self priming Optional extras on request
Drum drainer for fluid products Max discharge 1440 liter/hour Max pressure : 5 bar Self priming Optional extras on request
Drum drainer for high viscous products Max discharge 3 900 liter/hour Max pressure : 5 bar Self Priming Optional extras on request
Pneumatic drum drainer Max discharge 5900 liter/hour Max pressure : 10 bar Special high viscosity Optional extras : dosage system
Drum drainer for agressive products Capacity up to 3 000 liter/h Polypropylene body‐pump Stainless steel shaft Monophased motor
30
MANUEL DRUM DRAINER
• These drum drainer pumps are for use in decanting oils, hydrocarbons and similar products. They are self‐priming. • They are fitted with Viton seals for compatibility with numerous products • They allow the pumping of fluid or thick and pasty products • Their robust construction (steel and cast iron) guarantees a long service life • Their capacity is approximately 20 liters per minute.
The pump may be supplied alone or with the suction tube and the discharge elbow.
31
TROLLEY DRUM DRAINER
These are mobile supply drum drainers equipped with pumps for the decanting of oils, hydrocarbons and other similar products. They are self‐priming for viscosities up to 10 000 cSt. They enable drums with 2" bungs to be emptied completely. The trolley may be used alone to move drums around the warehouse. Capacity up to 90 liters per minute.
The units are fitted with: Motor‐CM tec pump Suction tube Discharge tube, 5m long Pump nozzle Electric cable, 5m long On‐off switch OPTIONAL EXTRAS Volume flow meter Tailor‐made filter as requested by client
32
DRUM DRAINER FOR FLUID PRODUCTS
These pumps are for use in transferring fluid products with viscosities of 2000 cSt such as oil, hydrocarbons or similar products. They are lightweight, easy‐to‐handle drum drainers (less than 20kg). Easy to use and designed for intensive use, they are robust and offer excellent value for money. Thanks to the trigger‐operated gun the operator can accurately control the quantity transferred. Capacity up to 20 liter/minute.
They are fitted with : 2 suction tubes for 60 and 200‐litre drums 1 flexible hose 5m long 1 trigger gun 1 electric cable, 4m long On‐off switch OPTIONAL EXTRAS Oil strainer Volume flow meter on request Other options available on request
33
DRUM DRAINER FOR HIGH VISCOUS PRODUCTS
These pumps are for use with thick, high viscosity products such as emulsifiers, paint, resin or similar products. They are very simple, drum drainers offering low‐risk handling. Designed for intensive use, they are robust and give excellent value for money. The pumping unit is at the bottom of the tube, allowing immediate priming and a regular flow. Capacity up to 40 liter/minute
They are fitted with : Inox tube On‐off switch OPTIONAL EXTRAS Volume flow meter Dosage system Flexible
34
PNEUMATIC DRUM DRAINER
This system for fully opening drum is used to transfer high viscosity products, even those with no flow capacity such as grease, lubricants, glues, silicones, inks or similar products. This is a hybrid system, pneumatic for the descent of the follower plate, guaranteeing constant feeding of the pump, and electric for the CM tec‐technology pump to facilitate the transferring of large quantities. The volumetric pumps that equip this system have a capacity of up to 90 L/min and 10 bars of pressure.
They are fitted with : Pneumatic frame CMtec‐type volumetric pump Follower plate Rigid discharge tube OPTIONAL EXTRAS Dosage system Shut‐off noozle
35
DRUM DRAINER FOR AGRESSIVE PRODUCTS
These drum drainer pumps are for use in transferring aggressive products with viscosities of 1000 cSt such as acids, sodas, bases, chloride products, fertilizers or inflammable products. They are lightweight and easy to handle drum drainers (less than 3 kg). Easy use and designed for low or high pressure, they exists as well for Atex or pneumatic version and offer excellent value for money. Thanks to the trigger‐operated nozzle the operator can accurately control the quantity transferred.
Capacity up to 50 liter/minute. They are fitted with : Polypropylene body‐pump Stainless steel shaft with turbine Monophased motor 1 PE flexible length 2 m 1 PP shut‐off nozzle OPTIONAL EXTRAS Oil strainer Flow meter DN 25 with connections Triphased or monophased motor Electronic speed controller
PUMPS
POLLARD PUMPS EST MEMBRE DU GROUPE IPI • WWW.GROUP-IPI.COM • Goupe IPI • SAS au capital de 2 448 550,00 € • SIREN 517 799 755 RCS TOULON • NAF 6420Z
PRODUCTOS ESPECIALES / 特种泵 / спЕЦиаЛЬноЕ оБоРУДоВаниЕ
37
SPECIALPRODUCTS
HIGHLIGHTS:
reactivity with ability to produce prototypes rapidly
adaptation to tailor‐made products
technology allowing a presence in multiple sectors of industry
Some examples of Pollard's niche applications:
bee‐keeping, with honey pumps
catering, with pumps for industrial fryers
military, with pumps for radar antennas or missile launch ramps
solar, with the pumps for heat‐transfer fluid
bio‐fuels, with pumps for vegetable oils with additives
textiles, with fiber‐lubrication pumps
special hydraulic pumps Special products presentation:
Food transfer Unit Synthetic materials Food product transferring Max discharge : 830 L/hour Optional extras : metering system
Synthetic raw material pump Discharge from 0.5 up to 1 950 Ltrs./hr. The full range can be delivered with a dosage unit able to program precisely the volume to transfer.
Lubrication compact unit Self contained unit for machine‐lubrication Motor‐pump installation in either standing or lying position Max pressure : 20 bar Optional extras on request
Liquid cleaning mobile unit Continuous oil cleaning system Mobile unit adjustable Max discharge : 9000 L/hour Optional extras on request
38
FOOD TRANSFER UNIT
These units are for transferring food products such as glucose, confectionery, vegetable oils, syrup, honey or similar products. They are motor‐pumps made from food‐grade synthetic materials. They are self‐contained and mobile with a gripper bar to facilitate handling. They can also be supplied with a metering module allowing the programming of the precise volume to be transferred. Capacity up to 830 liter/hour.
They are fitted with :
Stainless steel support plate CMtec‐type motor‐pump made of
synthetic materials Electrical box
OPTIONAL EXTRAS
Dosage module Flexible hose with shut‐off nozzle
and pressure switch Volume flow meter
39
SYNTHETIC RAW MATERIAL PUMPS
We offer a complete range of synthetic pumps made out of polyester cristallin and stainless steel, 100% food compatible and specially adapted to highly viscous food products. This range is used as example for following applications: Conditioning/Dosage Motor pumps: they are used to proportion and condition from fluid to high viscous products (example: conditioning in 800 g pot from a 1000 L barrel). After programming the computer the pump will deliver the required quantity as often as necessary. Coning oil Motor pumps: they are specifically used to transfer coning oils, in the textile industry. They are mounted in units to supply machines treating nylon thread for the spinning of synthetic fibers. Laboratory Motor pumps: because they enable a very large testing possibility
PC 0.5 ‐ 8.7 Synthetic pumps made out of polyester cristallin and stainless steel Raw material 100% food compatible Specially adapted to highly viscous products Max Pressure 3 bars Max flow 740 L/h Option: Dosage
MPC 0.5 – 8.7 Synthetic motorpumps made out of polyester cristallin and stainless steel Raw material 100% food compatible Specially adapted to highly viscous products Max Pressure 3 bars Max flow 740 L/h Option: Dosage
PC 30 ‐ 65 Synthetic pumps made out of polyester cristallin and stainless steel Raw material 100% food compatible Specially adapted to highly viscous products Max Pressure 3 bars Max flow 1 950 L/h Option: Dosage
MPC 30 ‐ 65 Synthetic motorpumps made out of polyester cristallin and stainless steel Raw material 100% food compatible Specially adapted to highly viscous products Max Pressure 3 bars Max flow 1 950 L/h Option: Dosage
40
LUBRICATION COMPACT UNIT
These units are for the closed circuit lubrication of special machines. They are tailor‐made to designs developed with the design offices of our industrial clients. The CMtec positive‐displacement pump carries the lubricant in a closed circuit between the machine to be lubricated and the oil sump of the lubrication unit. The assembly forms a self‐contained unit that may be mobile. Capacity on client request.
They are fitted with : Closed oil sump Filler breather Suction tube with oil strainer Visual level indicator with thermometer Motor‐pump unit OPTIONAL EXTRAS Air cooler Filtration system Heated tube Pressure control gauge Other tailor‐made options available on request.
41
MOBILE CLEANING UNIT
These units are for use in reducing the rate of pollution of hydraulic fluids and maintaining the required level of cleanliness. They offer an alternative to the replacement of used oil with new oil. These motor‐pumps are tailor‐made to designs developed with the design offices of our industrial clients. They are used for filtering the oil on installations which require regular servicing, avoiding the premature wearing of the components and therefore the number of breakdowns and production stoppages. In partnership with development department of our customers we have designed three different flow capacity to meet any customer request : 500 L/hr ; 2 000 L/hr and 5 000 L/hr. There is no “standard product”. Each cleaning unit is manufactured on demand.
They are fitted with : Aspiration strainer 125µ Filled‐up indicator Cartridge‐type discharge filter 25µ On‐off switch Motor‐pump unit OPTIONAL EXTRAS Pre‐filter with magnetic bar Water retention filter Filtration level 10µ
42
FAQ
What is type of technology are our pumps? They are volumetric pumps which combine the advantages of the gear pump and the vane pump. 2. What is the maximum discharge pressure of our pumps? 20 bar 3. What is the maximum temperature of the product pumped? 160°C 4. What is maximum discharge rate of our pumps? 30 m 3/hour (or 500 L/min) 5. Are our pumps self‐priming? Yes, they are all self‐priming thanks to our specific volumetric technology. 6. Do our pumps work with water? No, our pumps are hydraulic pumps as the product pumped must have a minimum lubrication capacity. 7. Do our pumps comply with the ATEX directive? Yes, all three of our pump ranges comply with the ATEX directive. 8. Can we satisfy specific requests from our clients? Yes, our design office has the capacity to develop a product specifically for a client, to its specifications. 9. What is the service life of our pumps? That depends on the product pumped and the conditions of use. Our pumps are designed for 20,000 hours' use with fluids with a good lubrication capacity.
43
CONTACT US
Phone: 33(0)4.94.10.19.90
Fax: 33(0)4.94.10.19.99
Mail adress:
Avenue de Copenhague Parc d'Activités de Signes 83870 SIGNES
E‐m@il: contact@pompes‐pollard.com
To receive a price quotation: Copy the form to fax us