-
2014-2015 Carleton University Calendar 1
EngineeringThe Co-operative Education Option is available
inEngineering. See the Co-operative Education section ofthis
Calendar for details.
Graduation RequirementsIn addition to the requirements listed
below, students mustsatisfy:
1. the University regulations including the processof Academic
Performance Evaluation (see theAcademic Regulations of the
University section of thisCalendar),
2. the Faculty regulations applying to all B.Eng.programs (see
the Academic Regulations for theBachelor of Engineering Degree
).
Students should consult with their Department whenplanning their
program and selecting courses.
Course Categories for EngineeringProgramsThe following
categories of courses are used in definingthe programs.
Basic Science ElectivesCourses in this classification must be
chosen from amongthose listed as acceptable for the current
academic year.The list is published annually on the engineering
academicsupport website: carleton.ca/engineering/uas . The listwill
change from year to year and only courses on the listvalid in the
year the course is taken, or courses for whichformal approval of
the Faculty has been obtained can beused as credit toward an
engineering degree. Coursesnot on the list may be used to fulfill a
Basic Scienceelective requirement with the permission of the
Faculty ofEngineering and Design and provided all other
specifiedcourse requirements are met. Note that access to courseson
the list is not guaranteed and may depend on spaceavailability and
the satisfaction of other requirementsincluding, for example,
course prerequisites.
Complementary Studies ElectivesCourses in this classification
must be chosen from amongthose listed as acceptable for the current
academic year.The list is published annually on the engineering
academicsupport website: carleton.ca/engineering/uas . The listwill
change from year to year and only courses on the listvalid in the
year the course is taken, or courses for whichformal approval of
the Faculty has been obtained can beused as credit toward an
engineering degree. English asa Second Language courses are not
acceptable for useas Complementary Studies electives in any
engineeringprogram. Courses not on the list may be used to fulfill
aComplementary Studies elective requirement with thepermission of
the Faculty of Engineering and Design andprovided all other
specified course requirements are met.Registration in CUTV sections
is not acceptable. Note thataccess to courses on the list is not
guaranteed and may
depend on space availability and the satisfaction of
otherrequirements including, for example, course prerequisites.
Communications Electives for CommunicationsEngineering
ELEC 4503 [0.5] Radio Frequency Lines andAntennas
ELEC 4505 [0.5] Telecommunication CircuitsELEC 4506 [0.5] CAD
for Communication CircuitsELEC 4509 [0.5] Communication LinksELEC
4702 [0.5] Fiber Optic CommunicationsSYSC 4607 [0.5] Wireless
Communications
Program RequirementsAerospace EngineeringBachelor of
EngineeringStudents in Aerospace Engineering must satisfy
therequirements for one of the following streams:
Aerospace Engineering - Bachelor of EngineeringStream A:
Aerodynamics, Propulsion and VehiclePerformance (21.5 credits)First
Year1. 4.0 credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
Year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5]
Engineering Graphical DesignMAAE 2101 [0.5] Engineering
DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5]
Numerical MethodsCCDP 2100 [0.5] Communication Skills for
Engineering Students4. 0.5 credit in Basic Science Electives
0.5Third Year5. 5.0 credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5]
Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE
3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied
Thermodynamics
-
2 Engineering
MAAE 3901 [0.5] Mech and Aero Engineering LabAERO 3002 [0.5]
Aerospace Design and PracticeAERO 3700 [0.5] Aerospace
MaterialsSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5]
Electrical Engineering
Fourth Year6. 4.5 credits in: 4.5
MAAE 4500 [0.5] Feedback Control SystemsECOR 4995 [0.5]
Professional PracticeAERO 4003 [0.5] Aerospace Systems DesignAERO
4302 [0.5] Aerodynamics and Heat TransferAERO 4306 [0.5] Aerospace
Vehicle PerformanceAERO 4308 [0.5] Aircraft Stability and
ControlMAAE 4907 [1.0] Engineering Design ProjectECOR 3800 [0.5]
Engineering Economics
7. 1.5 credits in 4000-level Mechanical and AerospaceEngineering
(MAAE, AERO or MECH) , or ELEC 4504
1.5
Total Credits 21.5
Aerospace Engineering - Bachelor of EngineeringStream B:
Aerospace Structures, Systems and VehicleDesign (21.5 credits)First
year1. 4.0 credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5]
Engineering Graphical DesignMAAE 2101 [0.5] Engineering
DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5]
Numerical MethodsCCDP 2100 [0.5] Communication Skills for
Engineering Students4. 0.5 credit in Basic Science Electives
0.5Third year5. 5.0 credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5]
Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE
3300 [0.5] Fluid Mechanics II
MAAE 3901 [0.5] Mech and Aero Engineering LabAERO 3002 [0.5]
Aerospace Design and PracticeAERO 3101 [0.5] Lightweight
StructuresAERO 3700 [0.5] Aerospace MaterialsSYSC 3600 [0.5]
Systems and SimulationELEC 3605 [0.5] Electrical Engineering
Fourth year6. 4.5 credits in: 4.5
MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5]
Materials: Strength and FractureECOR 4995 [0.5] Professional
PracticeAERO 4003 [0.5] Aerospace Systems DesignAERO 4602 [0.5]
Introductory AeroelasticityAERO 4608 [0.5] Composite MaterialsMAAE
4907 [1.0] Engineering Design ProjectECOR 3800 [0.5] Engineering
Economics
7. 1.5 credits in 4000-level MAAE, AERO, or MECH orELEC 4504
1.5
Total Credits 21.5
Aerospace Engineering - Bachelor of EngineeringStream C:
Aerospace Electronics and Systems (21.5credits)First year1. 4.0
credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.5 credits in: 5.5
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5]
Engineering Graphical DesignMAAE 2101 [0.5] Engineering
DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2700 [0.5]
Engineering MaterialsECOR 2606 [0.5] Numerical MethodsELEC 2501
[0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IELEC 2607
[0.5] Switching CircuitsCCDP 2100 [0.5] Communication Skills
for
Engineering StudentsThird year4. 5.0 credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsMAAE 2400 [0.5]
Thermodynamics and Heat
TransferMAAE 2300 [0.5] Fluid Mechanics I
-
2014-2015 Carleton University Calendar 3
AERO 3002 [0.5] Aerospace Design and PracticeSYSC 3501 [0.5]
Communication TheorySYSC 3600 [0.5] Systems and SimulationELEC 3500
[0.5] Digital ElectronicsELEC 3509 [0.5] Electronics IIELEC 3105
[0.5] Basic EM and Power EngineeringELEC 3909 [0.5] Electromagnetic
Waves
Fourth year5. 3.0 credits in: 3.0
ECOR 4995 [0.5] Professional PracticeAERO 4003 [0.5] Aerospace
Systems DesignMAAE 4907 [1.0] Engineering Design ProjectECOR 3800
[0.5] Engineering EconomicsMAAE 4500 [0.5] Feedback Control
Systems
6. 2.5 credits from: 2.5AERO 3240 [0.5] Orbital MechanicsAERO
4009 [0.5] Aviation Management and
CertificationELEC 4503 [0.5] Radio Frequency Lines and
AntennasELEC 4505 [0.5] Telecommunication CircuitsSYSC 4600
[0.5] Digital CommunicationsAERO 3841 [0.5] Spacecraft DesignAERO
4842 [0.5] Space Mission DesignELEC 4502 [0.5] Microwave
CircuitsELEC 4509 [0.5] Communication LinksELEC 4600 [0.5] Radar
and NavigationELEC 4706 [0.5] Digital Integrated ElectronicsSYSC
4405 [0.5] Digital Signal ProcessingSYSC 4607 [0.5] Wireless
Communications
7. 0.5 credit in Basic Science Elective 0.5Total Credits
21.5
Aerospace EngineeringStream D: Space Systems Design (21.5
credits)First year1. 4.0 credits in: 4.0
MATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005
[0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCHEM
1101 [0.5] Chemistry for Engineering Students
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5]
Communication Skills for
Engineering StudentsECOR 2606 [0.5] Numerical MethodsMAAE 2101
[0.5] Engineering Dynamics
MAAE 2001 [0.5] Engineering Graphical DesignMAAE 2400 [0.5]
Thermodynamics and Heat
TransferMAAE 2300 [0.5] Fluid Mechanics IMAAE 2700 [0.5]
Engineering MaterialsMAAE 2202 [0.5] Mechanics of Solids I
4. 0.5 credit in Basic Science Electives 0.5Third year5. 5.0
credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsSYSC 3600 [0.5]
Systems and SimulationELEC 3909 [0.5] Electromagnetic WavesMAAE
3004 [0.5] Dynamics of MachineryMAAE 3901 [0.5] Mech and Aero
Engineering LabMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3202 [0.5]
Mechanics of Solids IIAERO 3002 [0.5] Aerospace Design and
PracticeAERO 3240 [0.5] Orbital MechanicsAERO 3841 [0.5] Spacecraft
Design
Fourth year6. 4.5 credits in: 4.5
ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5]
Professional PracticeAERO 4540 [0.5] Spacecraft Dynamics and
ControlAERO 4446 [0.5] Heat Transfer for Aerospace
ApplicationsAERO 4842 [0.5] Space Mission DesignAERO 4442 [0.5]
Transatmospheric and Spacecraft
PropulsionELEC 4509 [0.5] Communication LinksMAAE 4907 [1.0]
Engineering Design Project
7. 1.5 credits from 4000-level MAAE, AERO or MECH,or AERO 3101,
AERO 3700, ELEC 4503, ELEC 4600,ELEC 4709
1.5
Total Credits 21.5
Architectural Conservation and SustainabilityEngineeringBachelor
of EngineeringStudents must satisfy the requirements for one of
thefollowing streams:
Architectural Conservation and SustainabilityEngineeringStream
A: Structural (22.0 credits)First year1. 5.5 credits in: 5.5
CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General
Chemistry IIMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH
1005 [0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
ScienceECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersARCH
1000 [0.5] Intro. to ArchitectureARCC 1202 [0.5] History of
Structures
-
4 Engineering
ENVE 1001 [0.5] Architecture and the EnvironmentSecond year2.
5.5 credits in: 5.5
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
CIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil
Engineering MaterialsENVE 2001 [0.5] Process Analysis for
Environmental
EngineeringMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5]
Thermodynamics and Heat
TransferECOR 2606 [0.5] Numerical MethodsCCDP 2100 [0.5]
Communication Skills for
Engineering StudentsARCC 2203 [0.5] Architectural Technology
3CDNS 2400 [0.5] Heritage Conservation in CanadaSTAT 2507 [0.5]
Introduction to Statistical Modeling I
3. 0.5 credits from: 0.5CHEM 2800 [0.5] Foundations for
Environmental
ChemistryERTH 2404 [0.5] Engineering Geoscience
Third year4. 5.0 credits in: 5.0
CIVE 3202 [0.5] Mechanics of Solids IICIVE 3203 [0.5]
Introduction to Structural AnalysisCIVE 3204 [0.5] Introduction to
Structural DesignCIVE 3205 [0.5] Design of Structural Steel
ComponentsCIVE 3206 [0.5] Design of Reinforced Concrete
ComponentsCIVE 3207 [0.5] Historic Site Recording and
AssessmentCIVE 4202 [0.5] Wood EngineeringARCC 3202 [0.5]
Architectural Technology 4ARCC 4500 [0.5] Design EconomicsARCH 4200
[0.5] Architectural Conservation
Philosophy and EthicsFourth year5. 3.5 credits in: 3.5
ECOR 4995 [0.5] Professional PracticeCIVE 4601 [0.5] Building
Pathology and
RehabilitationCIVE 4918 [1.0] Design ProjectENVE 4105 [0.5]
Green Building DesignENVE 4106 [0.5] Indoor Environmental
QualityARCH 4206 [0.5] Recycling Architecture in Canada
and Abroad6. 2.0 credits from: 2.0
CIVE 4200 [0.5] Matrix Analysis of FramedStructures
CIVE 4201 [0.5] Finite Element Methods inStructural Analysis
CIVE 4302 [0.5] Reinforced and PrestressedConcrete Design
CIVE 4303 [0.5] Urban PlanningCIVE 4308 [0.5] Behaviour and
Design of Steel
StructuresCIVE 4400 [0.5] Construction/Project Management
CIVE 4403 [0.5] Masonry DesignCIVE 4500 [0.5] Computer Methods
in Civil
Engineering(See Note 2, below)
Total Credits 22.0
Notes:
1. For Item 1 and students transferring into
ArchitecturalConservation and Sustainability Engineering(Structural
or Environmental Stream), students ingood standing and who have
successfully completedCHEM 1101 while registered in another
engineeringprogram may replace CHEM 1001 and CHEM 1002with CHEM
1101 plus one 0.5 credit course from theBasic Science Electives
list.
2. For Item 6 in the Structural Stream, CIVE 4907 mayreplace 1.0
credit.
Architectural Conservation and SustainabilityEngineeringStream
B: Environmental (22.0 credits)First year1. 5.5 credits in: 5.5
CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General
Chemistry IIMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH
1005 [0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
ScienceECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersARCH
1000 [0.5] Intro. to ArchitectureARCC 1202 [0.5] History of
StructuresENVE 1001 [0.5] Architecture and the Environment
Second year2. 5.5 credits in: 5.5
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
CIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil
Engineering MaterialsENVE 2001 [0.5] Process Analysis for
Environmental
EngineeringMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5]
Thermodynamics and Heat
TransferECOR 2606 [0.5] Numerical MethodsCCDP 2100 [0.5]
Communication Skills for
Engineering StudentsARCC 2203 [0.5] Architectural Technology
3CDNS 2400 [0.5] Heritage Conservation in CanadaSTAT 2507 [0.5]
Introduction to Statistical Modeling I
3. 0.5 credit from: 0.5CHEM 2800 [0.5] Foundations for
Environmental
ChemistryERTH 2404 [0.5] Engineering Geoscience
Third year4. 5.0 credits in: 5.0
-
2014-2015 Carleton University Calendar 5
CIVE 3204 [0.5] Introduction to Structural DesignCIVE 3207 [0.5]
Historic Site Recording and
AssessmentCIVE 4307 [0.5] Municipal HydraulicsENVE 2002 [0.5]
MicrobiologyENVE 3001 [0.5] Water Treatment Principles and
DesignENVE 3002 [0.5] Environmental Engineering
Systems ModelingENVE 3004 [0.5] Contaminant and Pollutant
Transport in the EnvironmentARCC 3202 [0.5] Architectural
Technology 4ARCC 4500 [0.5] Design EconomicsARCH 4200 [0.5]
Architectural Conservation
Philosophy and EthicsFourth year5. 5.0 credits in: 5.0
ECOR 4995 [0.5] Professional PracticeCIVE 4601 [0.5] Building
Pathology and
RehabilitationENVE 4005 [0.5] Wastewater Treatment
Principles
and DesignENVE 4101 [0.5] Waste ManagementENVE 4104 [0.5]
Environmental Planning and Impact
AssessmentENVE 4105 [0.5] Green Building DesignENVE 4106 [0.5]
Indoor Environmental QualityENVE 4918 [1.0] Design ProjectARCH 4206
[0.5] Recycling Architecture in Canada
and Abroad6. 0.5 credit from: 0.5
CIVE 4400 [0.5] Construction/Project ManagementENVE 3003 [0.5]
Water Resources EngineeringMECH 4401 [0.5] Power Plant AnalysisMECH
4403 [0.5] Power Generation SystemsMECH 4406 [0.5] Heat
TransferMECH 4407 [0.5] Heating and Air ConditioningSREE 4002 [0.5]
The Energy Economy, Reliability
and Risk
Total Credits 22.0
Biomedical and Electrical EngineeringBachelor of Engineering
(21.0 credits)First year1. 5.0 credits in: 5.0
BIOL 1003 [0.5] Introductory Biology ICHEM 1001 [0.5] General
Chemistry ICHEM 1002 [0.5] General Chemistry IIMATH 1004 [0.5]
Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential
Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
Second year
2. 4.5 credits in: 4.5MATH 2004 [0.5] Multivariable Calculus
for
Engineering or PhysicsECOR 2606 [0.5] Numerical MethodsELEC 2501
[0.5] Circuits and SignalsSYSC 2006 [0.5] Foundations of
Imperative
ProgrammingMATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5]
Communication Skills for
Engineering StudentsELEC 2507 [0.5] Electronics IELEC 2607 [0.5]
Switching CircuitsELEC 3105 [0.5] Basic EM and Power
Engineering
3. 0.5 credit from: 0.5BIOL 2005 [0.5] Human PhysiologyBIOL 2201
[0.5] Cell Biology and BiochemistryCHEM 2203 [0.5] Organic
Chemistry I
Third year4. 4.5 credits in: 4.5
SYSC 3203 [0.5] Bioelectrical SystemsSYSC 3610 [0.5] Biomedical
Systems, Modeling, and
ControlSYSC 4201 [0.5] Ethics, Research Methods
and Standards for BiomedicalEngineering
ELEC 3500 [0.5] Digital ElectronicsELEC 3908 [0.5] Physical
ElectronicsSTAT 3502 [0.5] Probability and StatisticsSYSC 3006
[0.5] Computer OrganizationSYSC 3501 [0.5] Communication TheoryELEC
3909 [0.5] Electromagnetic Waves
5. 0.5 credit from: 0.5BIOL 2005 [0.5] Human PhysiologyBIOL 2201
[0.5] Cell Biology and BiochemistryCHEM 2203 [0.5] Organic
Chemistry I
Fourth year6. 2.5 credits in: 2.5
ECOR 4995 [0.5] Professional PracticeELEC 4601 [0.5]
Microprocessor SystemsSYSC 4203 [0.5] Bioinstrumentation and
SignalsSYSC 4405 [0.5] Digital Signal ProcessingECOR 3800 [0.5]
Engineering Economics
7. 1.0 credit in: 1.0SYSC 4917 [1.0] Biomedical Engineering
Project
8. 1.0 credit from: 1.0ELEC 4709 [0.5] Integrated SensorsSYSC
4202 [0.5] Clinical EngineeringSYSC 4205 [0.5] Image Processing for
Medical
Applications9. 0.5 credit from SYSC or ELEC at the 3000-level
orabove with a laboratory/problem analysis component.
0.5
10. 1.0 credit in Complementary Studies Electives 1.0Total
Credits 21.0
Notes:
-
6 Engineering
1. For Item 3 above, with the permission of theirdepartment,
students may replace this requirementwith an alternate 0.5 credit
course in BIOL, BIOC orCHEM.
2. For Item 5 above, with the permission of theirdepartment,
students may replace this requirementwith an alternate 0.5 credit
course in BIOL, BIOC orCHEM.
Biomedical and Mechanical EngineeringBachelor of Engineering
(21.5 credits)First year1. 5.0 credits in: 5.0
CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General
Chemistry IIBIOL 1003 [0.5] Introductory Biology IMATH 1004 [0.5]
Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential
Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
Second year2. 4.5 credits in: 4.5
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5]
Communication Skills for
Engineering StudentsMAAE 2101 [0.5] Engineering DynamicsMAAE
2001 [0.5] Engineering Graphical DesignMAAE 2400 [0.5]
Thermodynamics and Heat
TransferMAAE 2300 [0.5] Fluid Mechanics IMAAE 2700 [0.5]
Engineering MaterialsMAAE 2202 [0.5] Mechanics of Solids I
3. 0.5 credit from: 0.5BIOL 2005 [0.5] Human PhysiologyBIOL 2201
[0.5] Cell Biology and BiochemistryCHEM 2203 [0.5] Organic
Chemistry I
Third year4. 5.0 credits in: 5.0
ECOR 2606 [0.5] Numerical MethodsSTAT 3502 [0.5] Probability and
StatisticsSYSC 3203 [0.5] Bioelectrical SystemsSYSC 3610 [0.5]
Biomedical Systems, Modeling, and
ControlSYSC 4201 [0.5] Ethics, Research Methods
and Standards for BiomedicalEngineering
MAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics
of Solids IIMECH 3002 [0.5] Machine Design and PracticeMECH 3310
[0.5] Biofluid MechanicsMECH 3710 [0.5] Biomaterials
5. 0.5 credit from: 0.5BIOL 2005 [0.5] Human PhysiologyBIOL 2201
[0.5] Cell Biology and BiochemistryCHEM 2203 [0.5] Organic
Chemistry I
Fourth year6. 3.5 credits in: 3.5
ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5]
Professional PracticeMAAE 3400 [0.5] Applied ThermodynamicsMAAE
4500 [0.5] Feedback Control SystemsMECH 4406 [0.5] Heat
TransferMECH 4210 [0.5] BiomechanicsMECH 4013 [0.5] Biomedical
Device Design
7. 1.0 credit in: 1.0MAAE 4907 [1.0] Engineering Design
Project
8. 0.5 credit in MAAE, MECH or AERO at the 4000-level,SYSC 4202
[0.5], SYSC 4203 [0.5]
0.5
9. 1.0 credit in Complementary Studies Electives 1.0Total
Credits 21.5
Notes:
1. For Item 3 above, with the permission of theirdepartment,
students may replace this requirementwith an alternate 0.5 credit
course in BIOL, BIOC orCHEM.
2. For Item 5 above, with the permission of theirdepartment,
students may replace this requirementwith an alternate 0.5 credit
course in BIOL, BIOC orCHEM.
Civil EngineeringBachelor of Engineering (21.5 credits)First
year1. 4.5 credits in: 4.5
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCCDP
2100 [0.5] Communication Skills for
Engineering Students2. 0.5 credit in Complementary Studies
Electives 0.5Second year3. 5.0 credits in: 5.0
ERTH 2404 [0.5] Engineering GeoscienceMATH 2004 [0.5]
Multivariable Calculus for
Engineering or PhysicsMATH 3705 [0.5] Mathematical Methods ICIVE
2004 [0.5] GIS, Surveying, and GraphicsCIVE 2101 [0.5] Mechanics
IICIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil
Engineering Materials
-
2014-2015 Carleton University Calendar 7
MAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics
and Heat
TransferECOR 2606 [0.5] Numerical Methods
4. 0.5 credit in Complementary Studies Electives 0.5Third year5.
5.0 credits in: 5.0
STAT 2507 [0.5] Introduction to Statistical Modeling ICIVE 3202
[0.5] Mechanics of Solids IICIVE 3203 [0.5] Introduction to
Structural AnalysisCIVE 3204 [0.5] Introduction to Structural
DesignCIVE 3205 [0.5] Design of Structural Steel
ComponentsCIVE 3206 [0.5] Design of Reinforced Concrete
ComponentsCIVE 3208 [0.5] Geotechnical MechanicsCIVE 3304 [0.5]
Transportation Engineering and
PlanningECOR 3800 [0.5] Engineering EconomicsELEC 3605 [0.5]
Electrical Engineering
6. 0.5 credit in Complementary Studies Electives 0.5Fourth
year7. 3.0 credits in: 3.0
CIVE 4208 [0.5] Geotechnical EngineeringCIVE 4209 [0.5] Highway
EngineeringCIVE 4407 [0.5] Municipal EngineeringCIVE 4918 [1.0]
Design ProjectECOR 4995 [0.5] Professional Practice
8. 2.0 credits from: 2.0CIVE 4200 [0.5] Matrix Analysis of
Framed
StructuresCIVE 4201 [0.5] Finite Element Methods in
Structural AnalysisCIVE 4202 [0.5] Wood EngineeringCIVE 4301
[0.5] Foundation EngineeringCIVE 4302 [0.5] Reinforced and
Prestressed
Concrete DesignCIVE 4303 [0.5] Urban PlanningCIVE 4307 [0.5]
Municipal HydraulicsCIVE 4308 [0.5] Behaviour and Design of
Steel
StructuresCIVE 4400 [0.5] Construction/Project ManagementCIVE
4403 [0.5] Masonry DesignCIVE 4500 [0.5] Computer Methods in
Civil
EngineeringCIVE 4614 [0.5] Building Fire SafetyCIVE 4907 [1.0]
Engineering ProjectENVE 3003 [0.5] Water Resources EngineeringENVE
4105 [0.5] Green Building Design
9. 0.5 credit in Complementary Studies Electives 0.5Total
Credits 21.5
Communications EngineeringBachelor of Engineering (21.5
credits)First year1. 4.0 credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or Physics
MATH 1005 [0.5] Differential Equations and InfiniteSeries for
Engineering or Physics
MATH 1104 [0.5] Linear Algebra for Engineering orScience
PHYS 1004 [0.5] Introductory Electromagnetism andWave Motion
ECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5]
Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
SYSC 2001 [0.5] Computer Systems FoundationsSYSC 2006 [0.5]
Foundations of Imperative
ProgrammingELEC 2501 [0.5] Circuits and SignalsCCDP 2100 [0.5]
Communication Skills for
Engineering StudentsMATH 3705 [0.5] Mathematical Methods ISYSC
2003 [0.5] Introductory Real-Time SystemsELEC 2507 [0.5]
Electronics IELEC 2607 [0.5] Switching CircuitsSYSC 2004 [0.5]
Object-Oriented Software
Development4. 0.5 credit in Basic Science Electives 0.5Third
year5. 4.5 credits in: 4.5
STAT 2605 [0.5] Probability ModelsELEC 3509 [0.5] Electronics
IIELEC 3500 [0.5] Digital ElectronicsELEC 3909 [0.5]
Electromagnetic WavesSYSC 3503 [0.5] Communication Theory IISYSC
4602 [0.5] Computer CommunicationsECOR 3800 [0.5] Engineering
EconomicsSYSC 3500 [0.5] Signals and SystemsSYSC 4502 [0.5]
Communications Software
6. 0.5 credit in SYSC or ELEC at the 3000- or 4000-level
0.5Fourth year7. 3.0 credits in: 3.0
SYSC 4604 [0.5] Digital Communication TheorySYSC 4504 [0.5]
Distributed Network ProcessingECOR 4995 [0.5] Professional
PracticeSYSC 4700 [0.5] Telecommunications EngineeringSYSC 4701
[0.5] Communications Systems LabSYSC 4405 [0.5] Digital Signal
Processing
8. 1.0 credit from: 1.0SYSC 4937 [1.0] Communications
Engineering
ProjectELEC 4907 [1.0] Engineering Project
9. 1.0 credit in Communications Electives forCommunications
Engineering
1.0
10. 0.5 credit in SYSC or ELEC at the 3000- or 4000-level
0.5
11. 0.5 credit in Complementary Studies Electives 0.5Total
Credits 21.5
-
8 Engineering
Note: For Item 8 above, students should register in SYSC4937 if
their supervisor is in Systems and ComputerEngineering, or in ELEC
4907 if their supervisor is inElectronics.
Computer Systems EngineeringBachelor of Engineering (21.5
credits)First year1. 5.0 credits in: 5.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1003 [0.5] Introductory Mechanics and
ThermodynamicsPHYS 1004 [0.5] Introductory Electromagnetism
and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics ISYSC 1005 [0.5] Introduction to Software
DevelopmentSYSC 2006 [0.5] Foundations of Imperative
ProgrammingSecond year2. 5.0 credits in: 5.0
CCDP 2100 [0.5] Communication Skills forEngineering Students
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods ISYSC 2001 [0.5] Computer
Systems FoundationsSYSC 2003 [0.5] Introductory Real-Time
SystemsSYSC 2004 [0.5] Object-Oriented Software
DevelopmentSYSC 2100 [0.5] Algorithms and Data StructuresELEC
2501 [0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IELEC
2607 [0.5] Switching Circuits
3. 0.5 credit in Complementary Studies Electives 0.5Third year4.
5.0 credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsECOR 3800 [0.5]
Engineering EconomicsSYSC 3010 [0.5] Computer Systems
Development
ProjectSYSC 3020 [0.5] Introduction to Software
EngineeringSYSC 3303 [0.5] Real-Time Concurrent SystemsSYSC 3501
[0.5] Communication TheorySYSC 3600 [0.5] Systems and
SimulationSYSC 3601 [0.5] Microprocessor SystemsSYSC 4001 [0.5]
Operating SystemsELEC 3500 [0.5] Digital Electronics
Fourth year5. 2.5 credits in: 2.5
SYSC 4507 [0.5] Computer Systems ArchitectureSYSC 4602 [0.5]
Computer Communications
SYSC 4805 [0.5] Computer Systems Design LabELEC 4705 [0.5]
Electronic Materials, Devices and
Transmission MediaECOR 4995 [0.5] Professional Practice
6. 1.0 credit from: 1.0SYSC 4907 [1.0] Engineering ProjectELEC
4907 [1.0] Engineering Project
7. 2.0 credits from: 2.0MECH 4503 [0.5] An Introduction to
RoboticsECOR 2606 [0.5] Numerical Methods
or SYSC or ELEC at the 3000-level or above8. 0.5 credit in
Complementary Studies Electives 0.5Total Credits 21.5
Note: For Item 6 above, students should register in SYSC4907 if
their supervisor is in Systems and ComputerEngineering, or in ELEC
4907 if their supervisor is inElectronics.
Electrical EngineeringBachelor of Engineering (21.5 credits)
First year1. 4.0 credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 4.5 credits in: 4.5
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
ECOR 2606 [0.5] Numerical MethodsELEC 2501 [0.5] Circuits and
SignalsSYSC 2006 [0.5] Foundations of Imperative
ProgrammingMATH 3705 [0.5] Mathematical Methods ISYSC 2004 [0.5]
Object-Oriented Software
DevelopmentELEC 2507 [0.5] Electronics IELEC 2607 [0.5]
Switching CircuitsCCDP 2100 [0.5] Communication Skills for
Engineering Students4. 0.5 credit in Complementary Studies 0.55.
0.5 credit in Basic Science Electives 0.5Third year6. 5.0 credits
in: 5.0
SYSC 3600 [0.5] Systems and SimulationELEC 3509 [0.5]
Electronics IIELEC 3500 [0.5] Digital ElectronicsELEC 3908 [0.5]
Physical ElectronicsELEC 3105 [0.5] Basic EM and Power
Engineering
-
2014-2015 Carleton University Calendar 9
STAT 3502 [0.5] Probability and StatisticsSYSC 3006 [0.5]
Computer OrganizationSYSC 3501 [0.5] Communication TheoryELEC 3909
[0.5] Electromagnetic WavesELEC 3907 [0.5] Engineering Project
Fourth year7. 1.5 credits in: 1.5
ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5]
Professional PracticeELEC 4601 [0.5] Microprocessor Systems
8. 1.0 credit from: 1.0SYSC 4907 [1.0] Engineering ProjectELEC
4907 [1.0] Engineering Project
9. 3.0 credits from: 3.0MECH 4503 [0.5] An Introduction to
RoboticsSYSC 3200 [0.5] Industrial Engineering
or ELEC OR SYSC at the 4000-level10. 0.5 credit from: 0.5Basic
Science Electives, orENVE, CIVE, IDES, MAAE, AERO, MECH at the
2000-level or above, or
MECH 4503 [0.5] An Introduction to RoboticsSYSC 3020 [0.5]
Introduction to Software
EngineeringSYSC 3200 [0.5] Industrial Engineering
or any ELEC or SYSC at the 4000-level
Total Credits 21.5
Note: For Item 8 above, students should register in ELEC4907 if
their supervisor is in Electronics, and in SYSC4907 if their
supervisor is in Systems and ComputerEngineering.
Engineering PhysicsBachelor of Engineering (21.5 credits)First
year1. 4.5 credits in: 4.5
CCDP 2100 [0.5] Communication Skills forEngineering Students
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1001 [0.5] Foundations of Physics IPHYS 1002 [0.5]
Foundations of Physics IIECOR 1606 [0.5] Problem Solving and
ComputersELEC 1908 [0.5] First Year Project
2. 0.5 credit in Complementary Studies Electives 0.5Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IPHYS 2202 [0.5] Wave
Motion and OpticsPHYS 2604 [0.5] Modern Physics I
SYSC 2006 [0.5] Foundations of ImperativeProgramming
SYSC 2004 [0.5] Object-Oriented SoftwareDevelopment
ECOR 2606 [0.5] Numerical MethodsELEC 2501 [0.5] Circuits and
SignalsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching
Circuits
Third year4. 5.5 credits in: 5.5
STAT 3502 [0.5] Probability and StatisticsPHYS 3606 [0.5] Modern
Physics IIPHYS 3701 [0.5] Elements of Quantum MechanicsPHYS 3807
[0.5] Mathematical Physics ISYSC 3501 [0.5] Communication
TheoryELEC 3105 [0.5] Basic EM and Power EngineeringELEC 3500 [0.5]
Digital ElectronicsELEC 3509 [0.5] Electronics IIELEC 3908 [0.5]
Physical ElectronicsELEC 3909 [0.5] Electromagnetic WavesSYSC 3600
[0.5] Systems and Simulation
Fourth year5. 3.0 credits in: 3.0
PHYS 4007 [0.5] Fourth-Year Physics Laboratory:Selected
Experiments andSeminars
PHYS 4707 [0.5] Introduction to Quantum MechanicsI
ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5]
Professional PracticeELEC 4908 [1.0] Engineering Physics
Project
6. 1.0 credit in PHYS at the 4000-level, which mustinclude one
of:
1.0
PHYS 4203 [0.5] Physical Applications of FourierAnalysis
PHYS 4208 [0.5] Modern OpticsPHYS 4409 [0.5] Thermodynamics and
Statistical
PhysicsPHYS 4508 [0.5] Solid State PhysicsPHYS 4807 [0.5]
Computational Physics
7. 1.0 credit in ELEC at the 4000-level excluding:ELEC 4504,
ELEC 4600, and ELEC 4705
1.0
8. 1.0 credit in Complementary Studies Electives 1.0Total
Credits 21.5
Environmental EngineeringBachelor of Engineering (21.0 credits)
First year1. 5.0 credits in: 5.0
CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General
Chemistry IIMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH
1005 [0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to Engineering
-
10 Engineering
ECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and
ComputersCCDP 2100 [0.5] Communication Skills for
Engineering StudentsSecond year2. 5.0 credits in: 5.0
CHEM 2800 [0.5] Foundations for EnvironmentalChemistry
ERTH 2404 [0.5] Engineering GeoscienceMATH 2004 [0.5]
Multivariable Calculus for
Engineering or PhysicsENVE 2001 [0.5] Process Analysis for
Environmental
EngineeringBIOL 1003 [0.5] Introductory Biology IBIOL 1004 [0.5]
Introductory Biology IICIVE 2200 [0.5] Mechanics of Solids IMAAE
2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics and
Heat
TransferECOR 2606 [0.5] Numerical Methods
Third year3. 5.0 credits in: 5.0
CHEM 3800 [0.5] The Chemistry of EnvironmentalPollutants
ENVE 3001 [0.5] Water Treatment Principles andDesign
ENVE 3002 [0.5] Environmental EngineeringSystems Modeling
ENVE 3003 [0.5] Water Resources EngineeringENVE 3004 [0.5]
Contaminant and Pollutant
Transport in the EnvironmentCIVE 2700 [0.5] Civil Engineering
MaterialsCIVE 3208 [0.5] Geotechnical MechanicsCIVE 4307 [0.5]
Municipal HydraulicsECOR 3800 [0.5] Engineering EconomicsSTAT 2507
[0.5] Introduction to Statistical Modeling I
Fourth year4. 4.0 credits in: 4.0
ENVE 4003 [0.5] Air Pollution and Emissions ControlENVE 4005
[0.5] Wastewater Treatment Principles
and DesignENVE 4006 [0.5] Contaminant HydrogeologyENVE 4101
[0.5] Waste ManagementENVE 4104 [0.5] Environmental Planning and
Impact
AssessmentENVE 4918 [1.0] Design ProjectECOR 4995 [0.5]
Professional Practice
5. 1.0 credit from: 1.0ENVE 4002 [0.5] Environmental
Geotechnical
EngineeringENVE 4105 [0.5] Green Building DesignENVE 4106 [0.5]
Indoor Environmental QualityENVE 4907 [1.0] Engineering ProjectCIVE
3304 [0.5] Transportation Engineering and
PlanningCIVE 4208 [0.5] Geotechnical EngineeringCIVE 4301 [0.5]
Foundation EngineeringCIVE 4303 [0.5] Urban PlanningCIVE 4400 [0.5]
Construction/Project Management
MECH 4401 [0.5] Power Plant AnalysisMECH 4403 [0.5] Power
Generation SystemsMECH 4406 [0.5] Heat TransferMECH 4407 [0.5]
Heating and Air ConditioningSYSC 3200 [0.5] Industrial
EngineeringSREE 3001 [0.5] Sustainable and Renewable
Energy SourcesSREE 4002 [0.5] The Energy Economy,
Reliability
and Risk6. 1.0 credit in Complementary Studies Electives
1.0Total Credits 21.0
Note: For Item 1 above and students transferring
intoEnvironmental Engineering, students in good standingand who
have successfully completed CHEM 1101 whileregistered in another
engineering program may replaceCHEM 1001 and CHEM 1002 with CHEM
1101 plus one0.5 credit either from the Basic Science Electives
forEngineering or the Science Electives list.
Mechanical EngineeringBachelor of Engineering (21.5
credits)First year1. 4.0 credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5]
Engineering Graphical DesignMAAE 2101 [0.5] Engineering
DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5]
Numerical MethodsCCDP 2100 [0.5] Communication Skills for
Engineering Students4. 0.5 credit in Basic Science Electives
0.5Third year5. 5.0 credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5]
Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE
3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied
Thermodynamics
-
2014-2015 Carleton University Calendar 11
MAAE 3901 [0.5] Mech and Aero Engineering LabMECH 3002 [0.5]
Machine Design and PracticeMECH 3700 [0.5] Principles of
ManufacturingSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5]
Electrical Engineering
Fourth year6. 4.0 credits in: 4.0
MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5]
Materials: Strength and FractureMECH 4003 [0.5] Mechanical Systems
DesignMECH 4406 [0.5] Heat TransferMAAE 4907 [1.0] Engineering
Design ProjectECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5]
Professional Practice
7. 2.0 credits from: 2.0ELEC 4504 [0.5] Avionics Systems
MECH, AERO, MAAE at the 4000-level
Total Credits 21.5
Mechanical Engineering with Concentration inIntegrated
ManufacturingBachelor of Engineering (22.0 credits)First year1. 4.0
credits in: 4.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004
[0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers
2. 1.0 credit in Complementary Studies Electives 1.0Second
year3. 5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5]
Engineering Graphical DesignMAAE 2101 [0.5] Engineering
DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5]
Numerical MethodsCCDP 2100 [0.5] Communication Skills for
Engineering Students4. 0.5 credit in Basic Science Electives
0.5Third year5. 5.5 credits in: 5.5
STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5]
Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE
3300 [0.5] Fluid Mechanics II
MAAE 3400 [0.5] Applied ThermodynamicsMAAE 3901 [0.5] Mech and
Aero Engineering LabMECH 3002 [0.5] Machine Design and PracticeMECH
3700 [0.5] Principles of ManufacturingSYSC 3200 [0.5] Industrial
EngineeringSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5]
Electrical Engineering
Fourth year6. 4.0 credits in: 4.0
MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5]
Materials: Strength and FractureMAAE 4907 [1.0] Engineering Design
ProjectECOR 4995 [0.5] Professional PracticeMECH 4003 [0.5]
Mechanical Systems DesignMECH 4406 [0.5] Heat TransferECOR 3800
[0.5] Engineering Economics
7. 1.5 credits from: 1.5MECH 4501 [0.5] State Space Modeling and
ControlMECH 4503 [0.5] An Introduction to RoboticsMECH 4604 [0.5]
Finite Element MethodsMECH 4704 [0.5] Integrated Manufacturing -
CIMSMECH 4705 [0.5] CAD/CAMMECH 4805 [0.5] Measurement and Data
SystemsMECH 4806 [0.5] Mechatronics
8. 0.5 credit in: 0.5MECH, AERO, MAAE at the 4000-level, or
ELEC 4504 [0.5] Avionics Systems
Total Credits 22.0
Software EngineeringBachelor of Engineering (21.5 credits)First
year1. 5.0 credits in: 5.0
CHEM 1101 [0.5] Chemistry for Engineering StudentsECOR 1010
[0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IMATH
1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5]
Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1003 [0.5] Introductory Mechanics and
ThermodynamicsPHYS 1004 [0.5] Introductory Electromagnetism
and
Wave MotionSYSC 1005 [0.5] Introduction to Software
DevelopmentSYSC 2006 [0.5] Foundations of Imperative
ProgrammingSecond year2. 4.5 credits in: 4.5
CCDP 2100 [0.5] Communication Skills forEngineering Students
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
COMP 1805 [0.5] Discrete Structures ISYSC 2001 [0.5] Computer
Systems FoundationsSYSC 2003 [0.5] Introductory Real-Time
Systems
-
12 Engineering
SYSC 2004 [0.5] Object-Oriented SoftwareDevelopment
SYSC 2100 [0.5] Algorithms and Data StructuresELEC 2501 [0.5]
Circuits and SignalsELEC 2607 [0.5] Switching Circuits
3. 1.0 credit in Complementary Studies Electives 1.0Third year4.
4.5 credits in: 4.5
COMP 3005 [0.5] Database Management SystemsECOR 3800 [0.5]
Engineering EconomicsSYSC 3110 [0.5] Software Development
ProjectSYSC 3101 [0.5] Programming LanguagesSYSC 3120 [0.5]
Software Requirements
EngineeringSYSC 3303 [0.5] Real-Time Concurrent SystemsSYSC 4001
[0.5] Operating SystemsSYSC 4106 [0.5] Software Product
ManagementSTAT 3502 [0.5] Probability and Statistics
5. 0.5 credit from: 0.5ELEC 2507 [0.5] Electronics ISYSC 3200
[0.5] Industrial EngineeringSYSC 3600 [0.5] Systems and
SimulationSYSC 3601 [0.5] Microprocessor SystemsSYSC 4102 [0.5]
Performance EngineeringSYSC 4502 [0.5] Communications SoftwareSYSC
4504 [0.5] Distributed Network ProcessingSYSC 4602 [0.5] Computer
CommunicationsELEC 4708 [0.5] Advanced Digital Integrated
Circuit
DesignELEC 4509 [0.5] Communication LinksELEC 4506 [0.5] CAD for
Communication Circuits
Fourth year6. 3.5 credits in: 3.5
ECOR 4995 [0.5] Professional PracticeSYSC 4101 [0.5] Software
ValidationSYSC 4005 [0.5] Discrete Simulation/ModelingSYSC 4120
[0.5] Software Architecture and DesignSYSC 4507 [0.5] Computer
Systems ArchitectureSYSC 4806 [0.5] Software Engineering LabELEC
4705 [0.5] Electronic Materials, Devices and
Transmission Media7. 1.0 credit in: 1.0
SYSC 4927 [1.0] Software Engineering Project8. 1.0 credit from
the list in Item 5 1.09. 0.5 credit from the list in Item 5, or
from: 0.5
SYSC 4105 [0.5] Engineering ManagementSYSC 4107 [0.5] Software
BusinessCOMP 3002 [0.5] Compiler ConstructionCOMP 4000 [0.5]
Distributed Operating SystemsCOMP 4001 [0.5] Distributed
ComputingCOMP 4002 [0.5] Real-Time 3D Game EnginesCOMP 4003 [0.5]
Transaction Processing SystemsCOMP 4106 [0.5] Artificial
Intelligence
Total Credits 21.5
Sustainable and Renewable Energy Stream A:Smart Technologies for
Power Generation andDistributionBachelor of Engineering (21.5
credits)First year1. 4.5 credits in: 4.5
MATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005
[0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCHEM
1101 [0.5] Chemistry for Engineering StudentsCCDP 2100 [0.5]
Communication Skills for
Engineering Students2. 0.5 credit in Complementary Studies
Electives 0.53. Successful completion of: 0.0
SREE 1000 [0.0] Introduction to Sustainable EnergySecond year4.
5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferENVE 2001 [0.5] Process Analysis for Environmental
EngineeringELEC 2501 [0.5] Circuits and SignalsELEC 2507 [0.5]
Electronics IECOR 2606 [0.5] Numerical MethodsSYSC 2006 [0.5]
Foundations of Imperative
ProgrammingELEC 2607 [0.5] Switching Circuits
5. 0.5 credit in Basic Science Electives 0.5Third year6. 5.0
credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsSYSC 3200 [0.5]
Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationSYSC
3006 [0.5] Computer OrganizationMAAE 3400 [0.5] Applied
ThermodynamicsELEC 4602 [0.5] Electrical Power EngineeringSREE 3001
[0.5] Sustainable and Renewable
Energy SourcesSREE 3002 [0.5] Energy Distribution and
Efficient
UtilizationSREE 3003 [0.5] Sustainable Energy Systems
DesignELEC 3508 [0.5] Power Electronics
Fourth year7. 4.0 credits in: 4.0
SYSC 4505 [0.5] Automatic Control Systems ISYSC 4602 [0.5]
Computer Communications
-
2014-2015 Carleton University Calendar 13
ENVE 4003 [0.5] Air Pollution and Emissions ControlECOR 3800
[0.5] Engineering EconomicsECOR 4995 [0.5] Professional
PracticeSREE 4001 [0.5] Efficient Energy ConversionSREE 4002 [0.5]
The Energy Economy, Reliability
and RiskELEC 4703 [0.5] Solar Cells
8. 1.0 credit in: 1.0SREE 4907 [1.0] Energy Engineering
Project
9. 0.5 credit in any 3000-level or 4000-level Engineeringcourse
for which prerequisites have been satisfied
0.5
10. 0.5 credit in any 4000-level Engineering course forwhich
prerequisites have been satisfied
0.5
Total Credits 21.5
Sustainable and Renewable Energy Stream B:Efficient Energy
Generation and ConversionBachelor of Engineering (21.5
credits)First year1. 4.5 credits in: 4.5
MATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005
[0.5] Differential Equations and Infinite
Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra
for Engineering or
SciencePHYS 1004 [0.5] Introductory Electromagnetism and
Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101
[0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCHEM
1101 [0.5] Chemistry for Engineering StudentsCCDP 2100 [0.5]
Communication Skills for
Engineering Students2. 0.5 credit in Complementary Studies
Electives 0.53. Successful completion of: 0.0
SREE 1000 [0.0] Introduction to Sustainable EnergySecond year4.
5.0 credits in: 5.0
MATH 2004 [0.5] Multivariable Calculus forEngineering or
Physics
MATH 3705 [0.5] Mathematical Methods IMAAE 2300 [0.5] Fluid
Mechanics IMAAE 2400 [0.5] Thermodynamics and Heat
TransferENVE 2001 [0.5] Process Analysis for Environmental
EngineeringELEC 3605 [0.5] Electrical EngineeringMAAE 2101 [0.5]
Engineering DynamicsECOR 2606 [0.5] Numerical MethodsMAAE 2001
[0.5] Engineering Graphical DesignMAAE 2202 [0.5] Mechanics of
Solids I
5. 0.5 credit in Basic Science Electives 0.5Third year6. 5.0
credits in: 5.0
STAT 3502 [0.5] Probability and StatisticsSYSC 3200 [0.5]
Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationMAAE
2700 [0.5] Engineering Materials
MAAE 3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied
ThermodynamicsELEC 4602 [0.5] Electrical Power EngineeringSREE 3001
[0.5] Sustainable and Renewable
Energy SourcesSREE 3002 [0.5] Energy Distribution and
Efficient
UtilizationSREE 3003 [0.5] Sustainable Energy Systems
DesignFourth year7. 4.0 credits in: 4.0
MAAE 4500 [0.5] Feedback Control SystemsENVE 4003 [0.5] Air
Pollution and Emissions ControlECOR 3800 [0.5] Engineering
EconomicsECOR 4995 [0.5] Professional PracticeMECH 4406 [0.5] Heat
TransferSREE 4001 [0.5] Efficient Energy ConversionSREE 4002 [0.5]
The Energy Economy, Reliability
and RiskMECH 4408 [0.5] Thermofluids and Energy Systems
Design8. 1.0 credit in: 1.0
SREE 4907 [1.0] Energy Engineering Project9. 0.5 credit in any
3000-level or 4000-level Engineeringcourse for which prerequisites
have been satisfied
0.5
10. 0.5 credit in any 4000-level Engineering course forwhich
prerequisites have been satisfied
0.5
Total Credits 21.5
Aerospace Engineering (AERO) CoursesDepartment of Mechanical and
AerospaceEngineeringFaculty of Engineering and Design
AERO 3002 [0.5 credit]Aerospace Design and PracticeDesign
approach and phases. Design integration.Influence of mission and
other requirements on vehicleconfiguration. Trade-off studies,
sizing and configurationlayout. Flight vehicle loads, velocity-load
factor diagram.Structural design: overall philosophy, role in
designprocess, methods.Prerequisite(s): MAAE 2001 and third-year
status inEngineering.Lectures three hours a week, problem analysis
three hoursa week.
AERO 3101 [0.5 credit]Lightweight StructuresStructural concepts;
theory of elasticity; bending, torsionand shear in thin-walled
beams having single or multi-cellsections; work and energy
principles; deformation andforce analysis of advanced structures,
including stiffenedthin-wall panels; finite element methods.
Stability andbuckling of thin-walled structures.Prerequisite(s):
MAAE 3202.Lectures three hours a week; problem analysis
andlaboratories one hour a week.
-
14 Engineering
AERO 3240 [0.5 credit]Orbital MechanicsReview of rigid body
dynamics, orbital elements, Kepleriantwo-body problem, orbit
transfers, rendezvous, time offlight, interplanetary trajectories,
manoeuvres (flyby,capture). Orbit determination and perturbations.
Advancedtopics: restricted three body problem, Lagrange’splanetary
equations.Prerequisite(s): MAAE 2101.Lectures three hours per week,
tutorial one hour per week.
AERO 3700 [0.5 credit]Aerospace MaterialsProperties, behaviour
and manufacturing methods formetals, polymers and ceramics used in
aerospaceapplications. Specialty alloys for gas turbines.
Propertiesand manufacture of aerospace composites. Behaviour
ofmaterials in space.Prerequisite(s): MAAE 2700.Lectures three
hours a week; problem analysis andlaboratories one hour a week.
AERO 3841 [0.5 credit]Spacecraft DesignDesign of spacecraft and
spacecraft subsystems withemphasis on mission requirements and
current designmethods: spacecraft configuration, payload,
structural,attitude control, thermal, power, and other
relatedsubsystems. Spacecraft integration and testing.Precludes
additional credit for AERO 4801.Prerequisite(s): MAAE 2001 and and
AERO 3240.Lectures three hours a week, tutorials or laboratories
threehours per week.
AERO 4003 [0.5 credit]Aerospace Systems DesignStress and
deflection analysis; fatigue, safe life, damagetolerant design.
Propulsion systems integration; landinggear; control and other
subsystems. Mechanicalcomponent design. Airworthiness regulations
andcertification procedures. Weight and cost estimation andcontrol.
System reliability. Design studies of aircraft orspacecraft
components.Prerequisite(s): MAAE 2202 and AERO 3002.Lectures three
hours a week, problem analysis three hoursa week.
AERO 4009 [0.5 credit]Aviation Management and
CertificationProduct development, quality control.
Strategicorganizational analysis and design. Airworthiness,
typecertification and planning, delegation of authority,
airplaneflight manual. Aerospace system design and
safety.Prerequisite(s): fourth-year status in Engineering.Lectures
three hours per week.
AERO 4300 [0.5 credit]Acoustics and Noise ControlBehaviour of
compressible fluids, sound waves andproperties of sound sources;
measurement of sound;human perception of sound; prediction methods
basedon energy considerations; sound propagation in
realisticenvironments: outdoors, rooms, ducts; absorption
andtransmission loss, noise control; case studies.Prerequisite(s):
MATH 3705 and fourth-year status inEngineering.Lectures three hours
a week.
AERO 4302 [0.5 credit]Aerodynamics and Heat TransferDifferential
equations of motion. Viscous and inviscidregions. Potential flow:
superposition; thin airfoils; finitewings; compressibility
corrections. Viscous flow: thinshear layer approximation; laminar
layers; transition;turbulence modeling. Convective heat transfer:
free versusforced convection; energy and energy integral
equations;turbulent diffusion.Prerequisite(s): MAAE 3300.Also
offered at the graduate level, with differentrequirements, as MECH
5000, for which additional credit isprecluded.Lectures three hours
a week.
AERO 4304 [0.5 credit]Computational Fluid DynamicsDifferential
equations of motion. Numerical integrationof ordinary differential
equations. Potential flows: panelmethods; direct solution;
vortex-lattice methods. Finite-difference formulations: explicit
versus implicit methods;stability. Parabolized and full
Navier-Stokes equations;conservation form. Transonic and supersonic
flows:upwind differencing. Grid transformations. Computer-based
assignments.Prerequisite(s): MAAE 3300 or MECH 3310.Lectures three
hours a week.
AERO 4306 [0.5 credit]Aerospace Vehicle PerformanceMorphology of
aircraft and spacecraft. Performanceanalysis of fixed wing
aircraft: drag estimation, propulsion,take-off, climb and landing,
endurance, payload/range,manoeuvres; operational economics.
Performanceanalysis of rotor craft: rotor-blade motion, hovering
andvertical ascent, forward flight, and autorotation.
Rocketpropulsion; escape velocity; orbital
dynamics.Prerequisite(s): MAAE 3300.Lectures three hours a
week.
-
2014-2015 Carleton University Calendar 15
AERO 4308 [0.5 credit]Aircraft Stability and ControlStatic
stability and control: equilibrium requirements;longitudinal
stability requirements; neutral points;manoeuvring flight; control
forces and controlrequirements; lateral static stability
certificationrequirements. Dynamic stability: axis systems;
governingequations; phugoid and short period modes; lateraldynamic
modes. Closed-loop control.Prerequisite(s): MAAE 3300. Additional
recommendedbackground: MAAE 4500.Also offered at the graduate
level, with differentrequirements, as MECH 5101, for which
additional credit isprecluded.Lectures three hours a week.
AERO 4402 [0.5 credit]Aerospace PropulsionPropulsion
requirements, effects of Mach Number,altitude, and application;
basic propeller theory; propeller,turboshaft, turbojet, turbofan
and rocket; cycle analysisand optimization for gas turbine power
plant; inter-relationsbetween thermodynamic, aerodynamic and
mechanicaldesigns; rocket propulsion; selection of
aeroengines.Precludes additional credit for MECH
4401.Prerequisite(s): MAAE 2400 and MAAE 3300.Lectures three hours
a week.
AERO 4442 [0.5 credit]Transatmospheric and Spacecraft
PropulsionPlanetary/interplanetary environments and effects.
Launchand spacecraft propulsion: liquid/solid/hybrid
rockets,ram/scramjets, combined cycle engines,
electrothermal,electromagnetic, electrostatic, nuclear, and
propellantlesspropulsion. Trajectory analysis, multi-staging,
separationdynamics. Advanced engine concepts.Prerequisite(s): AERO
4302 or AERO 4446 orMECH 4406.Lectures three hours a week.
AERO 4446 [0.5 credit]Heat Transfer for Aerospace
ApplicationsFundamentals of heat transfer with emphasis onaerospace
systems design. Conduction, convection andradiation modes of heat
transfer. Radiation exchangebetween surfaces and view factors.
Radiation inspacecraft thermal control. High speed flight and
reentryheating.Precludes additional credit for MECH
4406.Prerequisite(s): MAAE 2400, MAAE 3300.Lectures three hours a
week.
AERO 4540 [0.5 credit]Spacecraft Dynamics and ControlRigid body
dynamics. The dynamic behavior of spacecraft.Environmental torques.
The design of attitude controlsystems. Gravity gradient, spin, and
dual spin stabilization.Attitude manoeuvres. The design of
automatic controlsystems. Impacts of attitude stabilization
techniques onmission performance.Prerequisite(s): MATH 3705, AERO
3240 and SYSC 3600.Lectures three hours a week.
AERO 4602 [0.5 credit]Introductory AeroelasticityReview of
structural behaviour of lifting surface elements;structural
dynamics, Laplace Transforms, dynamicstability; modal analysis;
flutter, Theodorsen’s theory;flutter of a typical section; wing
flutter, T-tail flutter,propeller whirl flutter; gust response;
buffeting, limit cycleflutter.Prerequisite(s): MAAE 3300 and SYSC
3600.Lectures three hours a week.
AERO 4607 [0.5 credit]Rotorcraft Aerodynamics and
PerformanceRotorcraft history and fundamentals. Momentum
theory:hover, axial climb and descent, autorotation, forward
flight,momentum theory for coaxial and tandem rotors. Bladeelement
analysis. Rotor airfoil aerodynamics. Rotor bladedynamics and trim.
Helicopter performance, height-velocitycurves, conceptual design.
High-speed rotorcraft.Prerequisite(s): MAAE 3300 and MAAE
3004.Lectures three hours per week.
AERO 4608 [0.5 credit]Composite MaterialsReinforcing mechanisms
in composite materials; materialproperties. Strength and elastic
constants of unidirectionalcomposites; failure criteria. Analysis
of laminated plates;bending and eigenvalue problems. Environmental
effectsand durability. Damage tolerance. Design of
compositestructures.Prerequisite(s): MAAE 3202.Lectures three hours
a week.
AERO 4609 [0.5 credit]Joining of MaterialsDesign for joining:
base material and componentgeometry. Selection of joining method
and filler material;Adhesive bonding; Soldering; Brazing; Diffusion
bonding;Resistance welding; Fusion welding (GTAW, EB, laserand
plasma arc); Friction welding; NDE. Emphasis onAerospace materials
and applications.Prerequisite(s): AERO 3700 or MECH 3700.Lectures
three hours per week.
AERO 4801 [0.5 credit]Spacecraft DesignTypes of spacecraft.
Fundamentals of orbital mechanics.The design of spacecraft and
spacecraft subsystemswith emphasis on mission requirements and
currentdesign methods: spacecraft configuration,
payload,structural, propulsion, attitude control, thermal,
power,communication and other related subsystems.
Spacecraftintegration and testing.Precludes additional credit for
AERO 3841.Prerequisite(s): AERO 3002 or MECH 3002.Lectures three
hours a week.
-
16 Engineering
AERO 4802 [0.5 credit]Space Mission Analysis and DesignHistory
of space exploration. Review of solar system.Space mission design.
Space mission geometry. Spacemission analysis: orbit design, orbit
transfers andinterplanetary trajectories. Space environment and
itseffect on spacecraft design. Space propulsion and launchvehicle
design. Launch sequence, launch windows andlaunch cost. Reusable
launch systems.Precludes additional credit for AERO 4842, MAAE
4906B(1994-2004 inclusive), MECH 5802 (2002-2004 inclusive),MECH
5700 Section "L" (1994-1997 inclusive), MECH5805 (1999-2002
inclusive).Prerequisite(s): AERO 3002 or MECH 3002.Also offered at
the graduate level, with differentrequirements, as MECH 5106, for
which additional credit isprecluded.
AERO 4842 [0.5 credit]Space Mission DesignSpace mission
elements. System view of spacecraft.Requirements definition. Space
mission geometry. Orbitselection. Space environment and its effect
on spacecraftdesign. Launch vehicle design and selection.
Missionoperations. Space systems design examples.Precludes
additional credit for AERO 4802.Prerequisite(s): AERO 3841.Lectures
three hours a week, tutorials or laboratories onehour per week.
Civil Engineering (CIVE) CoursesDepartment of Civil and
EnvironmentalEngineeringFaculty of Engineering and Design
CIVE 2004 [0.5 credit]GIS, Surveying, and GraphicsEngineering
geometry and spatial graphics. Structuralengineering drawings and
computer aided drafting.Fundamentals of surveying, measuring
horizontaland vertical distances and angles. Topographic
andconstruction surveys. GPS and electronic surveying.Geographic
information systems, data, data structure andprocessing, spatial
referencing, cartographic modeling,application software.Lectures
three hours a week, problem analysis andlaboratories three hours a
week.
CIVE 2005 [0.5 credit]Architectural Technology 2Technical issues
involved in architectural designof buildings from ancient times to
the present.Technological innovation and materials related to
structuraldevelopments, and the organization and design
ofstructures. Basic concepts of calculus, equilibrium, andmechanics
of materials. Not eligible for use for Bachelor ofEngineering
degree requirements.Prerequisite(s): ARCC 2202.Lectures three hours
a week, laboratory three hours aweek.
CIVE 2101 [0.5 credit]Mechanics IIPlane trusses. Virtual work.
Friction. Relative motion ofparticles. Kinematics of a rigid body:
translation, rotation;general plane motion; absolute and relative
motion.Kinetics of a rigid body: equations of motion;
work-energy;impulse-momentum; conservation of momentum andenergy.
Conservative forces and potential energy.Precludes additional
credit for MAAE 2101 and ECOR2101.Prerequisite(s): ECOR 1101 and
MATH 1004 andMATH 1104.Lectures three hours a week, problem
analysis three hoursa week.
CIVE 2200 [0.5 credit]Mechanics of Solids IStress and strain.
Stress-strain relationship: Hooke’slaw. Torsion of circular shafts.
Bending moment andshear force distribution. Flexural stresses.
Deflection.Shear stress in beams. Stresses in thin- walled
cylinders.Transformation of 2D stress and strain: Mohr’s
circle.Buckling of columns.Precludes additional credit for MAAE
2202.Prerequisite(s): ECOR 1101 for B.Eng. students orCIVE 2005 for
B.A.S. with Concentration in Conservationand
Sustainability.Lectures three hours a week, problem analysis
andlaboratory three hours a week.
CIVE 2700 [0.5 credit]Civil Engineering MaterialsIntroduction to
material science. Structure of atoms.Crystallography. Crystal
Imperfections. Characteristics,behaviour and use of Civil
Engineering materials:steel, concrete, asphalt, wood, polymers,
composites.Specifications. Physical, chemical and
mechanicalproperties. Quality control and material tests.
Fatigue.Corrosion. Applications in construction and rehabilitation
ofstructures.Prerequisite(s): second year status for students in
anEngineering program or second year standing in a B.A.S.major in
Conservation and Sustainability.Lectures three hours a week,
problem analysis andlaboratory three hours a week.
CIVE 3202 [0.5 credit]Mechanics of Solids IIShear flow.
Definition of shear centre, Saint Venantand warping torsional
constants. Behaviour, governingdifferential equations and solutions
for torsion, beam-columns, lateral torsional buckling of doubly
symmetricbeams, axially loaded doubly symmetric, singly
symmetricand asymmetric columns. Failure criterion, fatigue
andfracture.Precludes additional credit for MAAE
3202.Prerequisite(s): CIVE 2200.Lectures three hours a week,
laboratory/problem analysisthree hours alternate weeks.
-
2014-2015 Carleton University Calendar 17
CIVE 3203 [0.5 credit]Introduction to Structural
AnalysisConcepts and assumptions for structural analysis:framed
structures; joints; supports; compatibility andequilibrium;
stability and determinacy; generalized forcesand displacements.
Principle of Virtual Work: unknownforce calculations; influence
lines. Complementary VirtualWork: displacement calculations,
indeterminate analysis.Introduction to the Stiffness Method of
Analysis.Prerequisite(s): CIVE 2200 and MATH 1004.Lectures three
hours a week, problem analysis three hoursalternate weeks.
CIVE 3204 [0.5 credit]Introduction to Structural DesignBuilding
systems and structural form. Design Philosophyand design process.
Limit states design. National BuildingCode of Canada. Determination
of dead, live, snow, wind,and earthquake loads.Prerequisite(s):
CIVE 2200 (concurrent).Lectures three hours a week, problem
analysis three hoursalternate weeks.
CIVE 3205 [0.5 credit]Design of Structural Steel
ComponentsIntroduction to CAN/CSA - S16, design and
behaviourconcepts; shear lag, block shear, local plate
buckling,lateral torsional buckling, instantaneous centre,
inelasticstrength and stability. Design of tension members,
axiallyloaded columns, beams, beam-columns, simple boltedand welded
connections.Prerequisite(s): CIVE 2200. Recommended
prerequisite:CIVE 3204.Lectures three hours a week, problem
analysis three hoursalternate weeks.
CIVE 3206 [0.5 credit]Design of Reinforced Concrete
ComponentsIntroduction to CAN/CSA - A23.3; design and
behaviourconcepts; flexural analysis at service loads; shear,bond,
Whitney stress block, under and over reinforcedbehaviour, ultimate
strength. Flexural design of singlyreinforced, doubly reinforced
T-beams, and one-wayslabs. Shear design for beams. One-way and
two-wayslab building systems, columns.Prerequisite(s): CIVE 2200.
Recommended prerequisite:CIVE 3204.Lectures three hours a week,
problem analysis three hoursalternate weeks.
CIVE 3207 [0.5 credit]Historic Site Recording and
AssessmentMethods of heritage documentation including
handrecording, photography, rectified photography, totalstation,
gps, photogrammetry, and laser scanning. Non-destructive testing
techniques; environmental assessmenttools for determining air
quality and energy efficiency.Multidisciplinary teams for all
project work.Also listed as ARCN 4100.Prerequisite(s): third-year
status in B.Eng. in ArchitecturalConservation and Sustainability
Engineering or third-yearstanding in B.A.S. Concentration in
Conservation andSustainability.Lectures three hours a week, lab or
field work two hours aweek.
CIVE 3208 [0.5 credit]Geotechnical MechanicsSoil composition and
soil classification. Soil properties,compaction, seepage and
permeability. Concepts ofpore water pressure, capillary pressure
and hydraulichead. Principle of effective stress,
stress-deformationand strength characteristics of soils,
consolidation, stressdistribution with soils, and settlement.
Laboratory testing.Also listed as ERTH 4107.Prerequisite(s):
third-year status in Engineering, orpermission of the department.
Additional recommendedbackground: ERTH 2404 or equivalent.Lectures
three hours a week, laboratory three hoursalternate weeks.
CIVE 3304 [0.5 credit]Transportation Engineering and
PlanningTransportation and the socio-economic environment;modal and
intermodal systems and components; vehiclemotion, human factors,
system and facility design;traffic flow; capacity analysis;
planning methodology;environmental impacts; evaluation methods.Also
listed as GEOG 4304.Prerequisite(s): third-year status in
Engineering, orpermission of the Department.Lectures three hours a
week, problem analysis three hoursalternate weeks.
CIVE 3999 [0.0 credit]Co-operative Work Term
CIVE 4200 [0.5 credit]Matrix Analysis of Framed StructuresReview
of basic structural concepts. Betti’s law andapplications. Matrix
flexibility method, flexibility influencecoefficients. Development
of stiffness influencecoefficients. Stiffness method of analysis:
beams;plane trusses and frames; space trusses and
frames.Introduction to the finite element method.Prerequisite(s):
CIVE 3203.Lectures three hours a week, problem analysis three
hoursalternate weeks.
-
18 Engineering
CIVE 4201 [0.5 credit]Finite Element Methods in Structural
AnalysisIntroduction to theory of elasticity. Simple finite
elements.Virtual Work formulation of equilibrium of structureand
element. Lagrange interpolation and basis fordisplacement shape
functions. Considerations in finiteelement modeling. Plate bending
theories and analysis.Shell theories and analysis.Prerequisite(s):
CIVE 4200.Also offered at the graduate level, with
differentrequirements, as CIVE 5103, for which additional credit
isprecluded.Lectures three hours a week, problem analysis three
hoursalternate weeks.
CIVE 4202 [0.5 credit]Wood EngineeringStructural design in
timber. Properties, anatomy of wood,wood products, factors
affecting strength and behaviour,strength evaluation and testing.
Design of columns, beamsand beam-columns. Design of trusses,
frames, glulamstructures, plywood components, formwork,
foundations,connections and connectors. Inspection, maintenance
andrepair.Also listed as ARCC 4202.Prerequisite(s): CIVE 2200.
Additional recommendedbackground: CIVE 3204.Lectures three hours a
week, problem analysis three hoursalternate weeks.
CIVE 4208 [0.5 credit]Geotechnical EngineeringStrength of soils,
steady state seepage, flownets andpiping. Stress distribution in
soils. Earth pressures: atrest, active and passive. Design of
flexible and rigidretaining structures. Stability of excavations,
slopesand embankments. Settlement of foundations. Bearingcapacity
of footings.Prerequisite(s): CIVE 3208.Lectures three hours a week,
problem analysis three hoursalternate weeks.
CIVE 4209 [0.5 credit]Highway EngineeringHighway planning;
highway location and geometric design;traffic engineering; highway
capacity; soil classifications;subgrade and base materials; highway
drainage; frostaction; structural design of rigid and flexible
pavements;highway economics and finance; maintenance
andrehabilitation.Prerequisite(s): Fourth year status in
engineering.Recommended prerequisites: CIVE 2004, CIVE 3304 andCIVE
3208.Lectures three hours a week, problem analysis three
hoursalternate weeks.
CIVE 4301 [0.5 credit]Foundation EngineeringA critical study of
the theories in soil mechanics and theirapplication to the solution
of geotechnical engineeringproblems. Field investigations,
laboratory and field testing,shallow foundations, special footings,
mat foundations, pilefoundations and excavations. Discussion of new
methodsand current research.Prerequisite(s): CIVE 4208.Lectures
three hours a week, laboratory three hoursalternate weeks.
CIVE 4302 [0.5 credit]Reinforced and Prestressed Concrete
DesignReinforced concrete shear and torsion design. Two-way slab
design by Direct Design and Equivalent FrameMethod. Behaviour and
design of slender reinforcedconcrete columns. Prestressed concrete
concepts; flexuralanalysis and design; shear design; anchorage
zonedesign; deflection and prestress loss
determination.Prerequisite(s): CIVE 3202, CIVE 3203 and CIVE
3206.Lectures three hours a week, problem analysis three
hoursalternate weeks.
CIVE 4303 [0.5 credit]Urban PlanningA systematic approach to
urban planning; urbansprawl; data collection; forecasting;
standards; spacerequirements; land use; zoning; transportation;
landdevelopment; site selection; land capability;
layout;evaluation; housing; urban renewal and new towns.Also listed
as GEOG 4303.Prerequisite(s): third-year status in Engineering,
orpermission of the Department.Lectures three hours a week, problem
analysis three hoursalternate weeks.
CIVE 4307 [0.5 credit]Municipal HydraulicsFluid flow
fundamentals. Hydraulics of pipe systems. Openchannel flow.
Prediction of sanitary and storm sewage,flow rates. Design of water
distribution systems, culverts,sanitary and storm sewers. Pumps and
measuringdevices. Hydraulic and flow control
structures.Prerequisite(s): MAAE 2300.Lectures three hours a week,
problem analysis one andone half hours per week.
CIVE 4308 [0.5 credit]Behaviour and Design of Steel
StructuresBehaviour and design of open web steel joists, steel
andcomposite decks, composite beams and columns, studgirders, and
plate girders. Design of moment connections,base plates and anchor
bolts, and bracing connections.Stability of rigid and braced
frames. Design for lateral loadeffects.Prerequisite(s): CIVE 3205
and fourth-year status inEngineering.Lectures three hours a week,
problem analysis three hoursalternate weeks.
-
2014-2015 Carleton University Calendar 19
CIVE 4400 [0.5 credit]Construction/Project ManagementSystems
approach to project planning and control.Analysis of alternative
network planning methods: CPM,precedence and PERT; planning
procedure; computertechniques and estimating; physical, economic
andfinancial feasibility; implementation feedback and control;case
studies.Prerequisite(s): fourth-year status in Engineering.Lectures
three hours a week, problem analysis three hoursalternate
weeks.
CIVE 4403 [0.5 credit]Masonry DesignIntroduction to structural
design in masonry. Propertiesof masonry materials and assemblages.
Behaviour anddesign of beams, walls and columns. Selected
topicsincluding veneer wall systems, differential
movement,workmanship, specifications, inspection, maintenance
andrepair. Lowrise and highrise building design.Prerequisite(s):
CIVE 3204, CIVE 3206 and fourth-yearstatus in Engineering or
permission of the Department.Also offered at the graduate level,
with differentrequirements, as CIVE 5200, for which additional
credit isprecluded.Lectures three hours a week, problem analysis
three hoursalternate weeks.
CIVE 4407 [0.5 credit]Municipal EngineeringIntroduction to
fundamentals of municipal engineering.Water quality: physical,
chemical and biologicalparameters. Water treatment: softening
mixing,flocculation, sedimentation, filtration,
disinfection,fluoridation. Biological processes. Wastewater
treatment:primary, secondary and tertiary treatment. Sludge
disposaland wastewater reuse. Solid waste
management.Prerequisite(s): fourth-year status in
Engineering.Lectures three hours a week, problem analysis one
andone half hours per week.
CIVE 4500 [0.5 credit]Computer Methods in Civil
EngineeringAdvanced software development for Civil
Engineeringapplications. Examples may be chosen from
surveying,transportation, geotechnical and/or structural
engineering.Software technologies include
object-orientedprogramming, data base management,
Internet-basedapplications and graphical user
interfaces.Prerequisite(s): ECOR 2606 and fourth-year status
inEngineering.Also offered at the graduate level, with
differentrequirements, as CIVE 5602, for which additional credit
isprecluded.Lectures three hours a week, problem analysis three
hoursalternate weeks.
CIVE 4601 [0.5 credit]Building Pathology and
RehabilitationDeterioration mechanisms for concrete, timber, steel
andmasonry structures. Identification of design
deficiencies;criteria for selection and design of rehabilitation
systems.Design techniques to reduce deterioration in
newconstruction and historical structures. fourth-year standingin
B.A.S. concentration in Conservation and Sustainability.Also listed
as ARCN 4200.Prerequisite(s): fourth-year status in B.Eng.
inArchitectural Conservation and Sustainability Engineeringor
fourth-year standing in B.A.S. concentration inConservation and
Sustainability.Lectures three hours a week, lab/field work two
hours aweek.
CIVE 4614 [0.5 credit]Building Fire SafetyUnderstanding
fire-structure interaction and theconcepts of fire severity and
resistance; behaviour ofsteel, concrete, and timber buildings
exposed to fires;compartment fire dynamics; correlations and
computermodels to predict fire dynamics; fire retardants;
laboratory-scale fire experiments; performance-based approach
forbuilding fire safety design.Prerequisite(s): fourth-year status
in Engineering, orpermission of the Department.Lectures three hours
a week, problem analysis andlaboratories one and one-half hours per
week.
CIVE 4907 [1.0 credit]Engineering ProjectA major project in
engineering analysis, design,development or research carried out by
individual studentsor small teams, for an opportunity to develop
initiative,self-reliance, creative ability and engineering
judgmentand is intended for students with high CGPAs and aninterest
in graduate studies.Prerequisite(s): fourth-year status in
Engineering andpermission of the department.
CIVE 4918 [1.0 credit]Design ProjectTeams of students develop
professional level experiencethrough a design project that
incorporates fundamentalsacquired in previous mathematics, science,
engineering,and complementary studies courses. A final report
andoral presentations are required.Prerequisite(s): fourth-year
status in Engineering.Lectures two hours alternate weeks, problem
analysisthree hours a week.
Electronics (ELEC) CoursesDepartment of ElectronicsFaculty of
Engineering and Design
Note: The Departments of Electronics and Systems andComputer
Engineering offer courses in: Biomedical andElectrical Engineering,
Communications Engineering,Computer Systems Engineering, Electrical
Engineering,Software Engineering and Engineering Physics.
-
20 Engineering
ELEC 1908 [0.5 credit]First Year ProjectA practical introduction
to engineering design. Studentswork in small teams to specify,
design and implementa system, formally managing the project
progress andsubmitting oral and written reports.
Professionalism:engineering ethics; health and safety. Technology,
societyand the environment.Prerequisite(s): registration in the
Engineering Physicsprogram.Lectures and tutorials three hours a
week, laboratory fourhours a week.
ELEC 2501 [0.5 credit]Circuits and SignalsProperties of signals.
Basic circuit elements: voltage andcurrent sources. Kirchhoff’s
laws, linearity, superposition.Thevenin and Norton’s theorems.
Circuit simplification. ACsteady-state analysis: impedance,
admittance, phasors,frequency response. Transient response of RL
and RCcircuits: form of response, initial and final conditions.
RLCcircuits: resonance.Precludes additional credit for PLT
2005.Prerequisite(s): MATH 1005 and (PHYS 1004 orPHYS
1002).Lectures three hours a week, laboratory and problemanalysis
three hours a week.
ELEC 2507 [0.5 credit]Electronics IQualitative semiconductor
physics, leading to the diodeequation. Diode applications.
Operational amplifiers andtheir application in feedback
configurations including activefilters. Introduction to bipolar
transistors and MOSFETs,analysis of biasing circuits. Transistor
applicationsincluding small signal amplifiers.Precludes additional
credit for PLT 2006.Prerequisite(s): ELEC 2501.Lectures three hours
a week, laboratory and problemanalysis three hours a week.
ELEC 2607 [0.5 credit]Switching CircuitsBoolean algebra, gate,
combinatorial circuits. DeMorgannotation, sum-of-product and
product-of-sum forms. Logicarrays, PLAs and PALs. Flip-flops,
latches, sequentialcircuits, state graphs and state minimization.
Counters andcontrollers. Hazards. Asynchronous sequential
circuits,race free assignment, realization.Precludes additional
credit for SYSC 2607/SYSC 3607 orELEC 3607.Prerequisite(s): PHYS
1004 or PHYS 1002.Lectures three hours a week, laboratory three
hoursalternate weeks.
ELEC 3105 [0.5 credit]Basic EM and Power
EngineeringElectrostatics and magnetostatics. Solution of
Poisson’sand Laplace’s equations. The Lorenz equation and
force.Time varying fields. Magnetic circuits and transformers.DC
and AC machines. Basic three-phase power.Precludes additional
credit for PLT 3003.Prerequisite(s): MATH 2004 and (PHYS 1004
orPHYS 1002).Lectures three hours a week, laboratory and
problemanalysis three hours alternate weeks.
ELEC 3500 [0.5 credit]Digital ElectronicsDigital circuit design
using verilog and logic synthesis, theelectronic properties of
logic gates, electrical interfacingbetween logic families,
asynchronous to synchronousinterfacing, clock distribution and
timing, VLSI designoptions. Students implement substantial circuits
with field-programmable gate arrays.Prerequisite(s): ELEC 2507 and
ELEC 2607.Lectures three hours a week, laboratory three hours
aweek.
ELEC 3508 [0.5 credit]Power ElectronicsPower transformers. DC
and AC motors. Powersemiconductor devices: Thyristors, Triacs,
MCTs,IGBTs). Converter circuits: controlled AC to DC
rectifiers,choppers, DC to AC inverters, AC voltage
controllers,cycloconverters. Protection of conversion
circuits.Applications to high-efficiency control of electric
machinesand electromechanical energy conversion
devices.Prerequisite(s): ELEC 2501 and ELEC 2507.Lectures three
hours per week, laboratories/problemanalysis three hours per
week.
ELEC 3509 [0.5 credit]Electronics IIIntroduction to
semiconductor devices and ICs. DC,AC and switching properties of
BJTs. Linear amplifiers;bandwidth considerations; two-port
analysis. Large signalamplifiers; power amplifiers; transformerless
circuits.Feedback and operational amplifiers; gain,
sensitivity,distortion and stability. Filter design.
Oscillators.Prerequisite(s): ELEC 2507.Lectures three hours a week,
laboratory three hours aweek.
ELEC 3605 [0.5 credit]Electrical EngineeringDC circuits:
elements, sources, analysis. Single phase ACcircuits: phasors, RLC
circuits, real and reactive power,impedance, network analysis,
three phase systems. Powertransformers. DC motors: operation and
characteristics.AC motors: single phase and three phase.Precludes
additional credit for ELEC 2501.Prerequisite(s): MATH 1005 and
(PHYS 1004 orPHYS 1002).Lectures three hours a week, problem
analysis 1.5 hours aweek.
-
2014-2015 Carleton University Calendar 21
ELEC 3907 [0.5 credit]Engineering ProjectStudent teams work on
open-ended projects basedon previously acquired knowledge. Lectures
aredevoted to discussing project-related issues and
studentpresentations. A project proposal, a series of
projectreports, and oral presentations, and a comprehensive
finalreport are required.Prerequisite(s): ELEC 2607, ELEC 2507, and
ECOR 2606,and enrolment in the Electrical Engineering
program.Lecture two hours per week, laboratory six hours
perweek.
ELEC 3908 [0.5 credit]Physical ElectronicsFundamentals of device
physics and operation of the pnjunction, bipolar transistor and
MOSFET. Basic integratedcircuit processing and application to
diodes, BJTs andMOSFETs. Correlation between processing,
structure,operation and modeling. Consideration of parasitic
andsmall-geometry effects, reliability and process
variation.Precludes additional credit for ELEC
4705.Prerequisite(s): ELEC 2507.Lectures three hours a week,
problem analysis two hoursa week.
ELEC 3909 [0.5 credit]Electromagnetic WavesMaxwell’s equations
and EM wave solutions. Polarization.Poyntingvector. EM waves in
dielectrics and conductors;skin depth. Reflection and refraction.
Standing waves.Fresnel relations, Brewster angle. Transmission
lines.Line termination, basic impedance matching andtransformation.
Smith charts. Introduction to guidedwaves; slab waveguide.Precludes
additional credit for PHYS 3308.Prerequisite(s): ELEC 3105 or
permission of theDepartment.Lectures three hours a week, problem
analysis three hoursalternate weeks.
ELEC 3999 [0.0 credit]Co-operative Work Term
ELEC 4502 [0.5 credit]Microwave CircuitsIntroduction to
microwave semiconductor devices,microwave passive components,
microwave integratedcircuit technology, and microwave circuit
measurements.Basic network theory and scattering matrix description
ofcircuits. Design of matching networks, filters, amplifiersand
oscillators at microwave frequencies.Prerequisite(s): ELEC 4503;
may be taken concurrently.Lectures three hours a week, laboratory
three hoursalternate weeks.
ELEC 4503 [0.5 credit]Radio Frequency Lines and
AntennasIntroduction to distributed circuits, travelling
andstanding waves, reflection coefficient, SWR,
impedancetransformation, Smith charts. Introduction to
transmissionlines; coaxial, rectangular waveguide, resonators,
opticalfibers. Introduction to antennas; gain, directivity,
effectivearea. Introduction to linear arrays.Prerequisite(s): ELEC
3909.Lectures three hours a week, laboratory three hoursalternate
weeks.
ELEC 4504 [0.5 credit]Avionics SystemsElectromagnetic spectrum.
Air data sensing, display.Communications systems. Navigation and
landingsystems; ground-based, inertial and satellite
systems.Airborne radar. Guidance, control for aircraft,autopilots;
stability augmentation; active control; sensorrequirements; display
techniques. Aircraft power systems.Safety systems. Vehicle/systems
integration, certification.Precludes additional credit for AERO
4504.Prerequisite(s): fourth-year status in Engineering. Notopen to
students in Electrical Engineering, ComputerSystems Engineering,
Aerospace Stream C Engineering,Engineering Physics or
Communications Engineering.Lecture three hours a week.
ELEC 4505 [0.5 credit]Telecommunication CircuitsA course of
study of the commonly used circuitcomponents in modern
telecommunication systems. Bothanalog and digital systems are
included. The design ofthe hardware is emphasized. Examples are
drawn frombroadcasting, telephony and satellite
systems.Prerequisite(s): ELEC 3509 and (SYSC 3501 orSYSC
3503).Lectures three hours a week, laboratory three hoursalternate
weeks.
ELEC 4506 [0.5 credit]CAD for Communication CircuitsBasic
principles of Computer-Aided Design tools usedfor analysis and
design of communication circuits andsystems. Frequency and
time-domain analysis. Noise anddistortion analysis. Transmission
line effects. Sensitivityanalysis, and circuit performance
optimization. Digitalsimulat