2013 LOGO & COLOR GUIDELINES · TUUCI® Equinox Double Chaise Lounge installation instructions 2013 LOGO & COLOR GUIDELINES FOILS / PMS 1&2 COLOR GLOSS FOIL PMS 1795 C 877 DULL FOIL

TUUCI® Equinox Double Chaise Loungeinstallation instructions

2013 LOGO & COLOR GUIDELINES

FOILS / PMS 1&2 COLOR

GLOSS FOIL

PMS 1795 C

877 DULL FOIL

PMS 1795 C

GLOSS FOIL

877 DULL FOIL

PMS 1&2 COLOR

PMS 877 C

PMS 1795 C

PMS 877 C

PMS 1795 C

BLACK & WHITE 1 COLOR

BLACK

WHITE

2 | tuuci

INSA6035

INSTALLATION INSTRUCTIONS TUUCI® EQUINOX DOUBLE CHAISE LOUNGE

Note: This installation may require 2 people.

Step 1. Remove the pre-installed ³/₈ -16 x 3/4” flat head screws from the lower beam andremove ³/₈ -16 x1- 1/2” hex head cap screws from the leg. Mount L-bracket to the leg.

Then slide the 2"x4" lower beam over the L-bracket and tighten screws from the bottom.

Step 2. Remove the (4) pre-install ³/₈-16 hex stainless steel nuts from the upper beam and mount to the leg by tightening the 4 nuts from the inside of the leg.

Repeat steps 1 and 2 for all corners.

3/8-16 x 3/4” flat head

L-bracket

lower beam

3/8”-16 x 1-1/2” hex head cap screw

1

upper beam

3/8-16 hex stainless steel nut

2

beam 1 beam 2

beam 3beam 4

tuuci | 3

INSA6035

INSTALLATION INSTRUCTIONS TUUCI® EQUINOX DOUBLE CHAISE LOUNGE

33/8-16 x 3/4” flat head

center beam

3/8”-16 x 1-1/2”hex head cap screw

4

beam 1

beam 3

back rest frame.

tie backs

bench frames.

cushions

5

Step 3. Remove the pre-installed 3/8-16 x 3/4” flat head screws from the center beam andremove 3/8”-16 x 1-1/2” hex head cap screws from upper beams 1 and 3. Mount L-bracket to upper beam 1.

Then, drop center beam over the L-bracket and tighten the screws from the side.

Step 4. Drop-in (2) back rest frames, (4) bench frames and (2) Cushions. Tie cushions to bench frames.

Step 5. Lift up back rest to adjust to the desired angle.