Open the hood and remove the factory push fasteners securing the radiator support panel cover and remove the cover. TOOLS REQUIRED Use a flat blade screwdriver to remove the factory push pin / rubber bumper securing the top of the factory bumper cover to the radiator support panel. 3 2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Open the hood and remove the factory push fasteners securing the radiator support panel cover and remove the cover.
TOOLS REQUIRED
Use a flat blade screwdriver to remove the factory push pin / rubber bumper securing the top of the factory bumper cover to the radiator support panel.
3
2
Use a flat blade screwdriver to rotate the inner wheel well mounting fasteners 90 degrees (1/4 turn) to unclip and remove them (one each side).
Please contact the authorized E&G Classics Dealer where you purchased our product from in regards to any workmanship or warranty claims. All items returned to E&GClassics must have a return authorization number issued by us for inspection or a defective product and or warranty issue. All merchandise sent back to E&G Classicswithout proper paperwork or authorization will be rejected and returned.