2009 Hp Supplement

2009

SUPPLEM

ENT

1

NORTHERNHIGH PERFORMANCE

ALUMINUM CLEANERRemoves oxidation to brighten metal!

Use to prepare aluminum surfaces forpainting, polishing, welding or fabricating.Use it to make aluminum LOOK GREAT!

SPRAY IT ON ~ RINSE IT OFF

Your aluminum is brilliantly clean!

1 Quart Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z14001

NOTE: Northern High Performance Aluminum Cleaner is an industrial strength acid

cleaner designed specifically for cleaning aluminum parts in a dip tank. It is designed

to remove oxidation, other corrosion products and deposits. The Cleaner is a blend

of inorganic acids to provide the most complete corrosion and deposit removal with

the safest product possible. The acids in Northern High Performance Aluminum

Cleaner are inhibited to prevent excessive removal of base metal. Cleaner leaves

the aluminum bright and shiny with a satin finish. Pitted aluminum will look much

better after cleaning, but the pits will still be apparent. Aluminum with a mirror

finish will be given a satin finish as only polishing can restore the mirror look.

Northern High Performance Aluminum The Cleaner will remove the color from

anodized aluminum. This product is temperature sensitive and works twice as fast at

90º as 50º F. This product is concentrated and aluminum left exposed to the cleaner

for an extended period of time will etch and could dissolve. This product will etch glass

parts and attack various metals in different ways. Plastic, rubber and most paints are not

affected by it. Test first to be sure.

2

NORTHERN POWER LINERBetter Liner, Better Kit and Better Job!

As a truck bedliner...Our kit includes all the product necessary todo an 8ft pickup box. Our competitor supplies 1 gallon of liner in theirkit. Then the instructions tell you to buy another quart.When do you read the instructions? Right! Just before you dothe job. They tell you to buy another quart (really you need 2 quarts,cause one won’t do the job). Then they tell you to use M.E.K to prepthe truck box. But you don’t get M.E.K. in their kit. So where do youget M.E.K.? Quick now, your Saturday’s awasting!Check it out...We include 6 quarts of liner. By the way, we use anabrasive that doesn’t clump in the can. They don’t. And we include theM.E.K and the tools!Also Great for... Trailers, Boat Decks, Docks, Walkways, & Steps

KIT: #Z14002• (2) Rollers• Paint Brush• 6 Quarts Power Liner• 1 Pint M.E.K.• Scuff Pad

3

Northern tank liner is resistant to gasoline, diesel fuel, alcohol and other fueladditives. Northern offers a retail ready tank liner kit for Automotiveapplications and a kit for Motorcycles.

3 Simple Steps ~ Easy Instructions ~ Clean, Prep, Seal

• Will never crack or peel off.• No expensive come-backs.• Seals old rust in and prevents future rusting.• Seals all the pin-holes including the ones you can’t find.• Three easy steps, all in one box!

MOTORCYCLE TANK LINER KIT

KIT: #RW125-8• Tank Liner Pint

• Tank Prep M.E.K. Pint

• Tank Cleaner Pint

4

Why pay someone else to polish your radiators?

Northern’s show car quality polishing kit includes theright rouge and tools for a mirror smooth brilliantfinish.Northern’s Radiator Polishing Kit is designed forsmooth surface polishing, not for cast surfaces.

ALUMINUMRADIATOR

POLISHING KIT

KIT: #Z12450• (1) Each of Black, Brown & White Polishing Compounds

• (1) Each of a Mushroom, Cylinder & Tapered Buffs

• (5) Different Shape Felt Bobs

• (2) Spiral Sewn Mounted Buffs

• (1) Single Stitch Mounted Buff

5

THE NORTHERN GAS STATIONGreat for automotive, industrial, agricultural equipment,

lawn, boat and anything else that needs fuel.

No more lifting heavy fuel containers. Just place

the fuel hose in a fuel supply

container and squeeze the trigger.

The Northern Gas Station Pump

is powered by plugging it

into your vehicle’s

utility/cigarette socket.

The variable speed

trigger safely transfers

gasoline or diesel fuel.

This Northern Gas Station

Pump will lift fuel more

than 20 feet vertical. It’s great

for refilling mowers, boats, tractors,

ATV’s, Snowmobiles, RV’s, Personal Water

Cafts, Garden Equipment, etc...

KIT: #Z12525

• 12 Volt DC Power Port Socket w/Battery Clamps• 7’ Fuel Hose• The Northern Gas Station Pump

Use with Gasoline & Diesel • Easy to useNo more lifting gas cans

6

ENGINE DRIVEN FAN SHROUD

Application for Northern Aluminum Radiators Measures

Z40020 209600, 209604, 209612, 209616, 209644, 205145, 205150 19” x 16 3/4” x 2 5/8”

Z40021 209601, 209605, 209635, 209636, 205147, 205152, 209613, 209617 19” x 20 1/2” x 2 5/8”

Z40022209602, 209606, 209614, 209618, 209624, 209625, 209638,

19” x 21 3/4” x 2 5/8”209639, 205148, 205153

Z40023209603, 209607, 209615, 209619, 209626, 209627, 209640, 209641, 205149,

19” x 26” x 2 5/8”205154, 205066, 205063, 205027, 205062, 205056

Z40024 209633, 209634, 209642, 209643, 205146, 205151, 205054, 205053 19” x 18 3/4” x 2 5/8”

Z40025 205064, 205030, 205059 15 1/8” x 17” x 2 5/8”

Z40026 205060, 205061, 205065, 205026 18 3/8” x 28” x 2 5/8”

Z40027 209620, 209621, 209622, 209623 16 1/8” x 22 1/2” x 2 5/8”

Z40028 209628, 209629, 209630, 209631 16 1/8” x 26 1/4” x 2 5/8”

Z40029 205155, 205156 15 1/8” x 18 3/4” x 2 5/8”

Z40030 205072, 205125 22” x 18 1/2” x 2 5/8”

Z40031 205070, 205071 22 3/8” x 18 1/2” x 2 5/8”

Z40032 205161, 205163 21 3/8” x 15 3/4” x 2 5/8”

Z40033 205162, 205164, 205132, 205137 15 1/8” x 25” x 2 5/8”

Z40034 205028, 205057 20 3/4” x 18 1/2” x 2 5/8”

Z40035 205029, 205058 24 1/4” x 18 1/2” x 2 5/8”

Z40036 205122 16 1/2” x 20” x 2 3/4”

Part #

• Made for exact fit of Northern aluminum HighPerformance radiators, and will fit most other brands

• 2.63” Depth with a 3” Trimable Collar

• Allows the installer the choice of off center,side to side and above the radiator fan positioning

• For crossflow or downflow radiator mounting

• Includes fully formed shroud of .063” lightweightaircraft aluminum

• Adjustable collar, adjusts for 15-20” fan diameters

• Includes all the necessary hardware and instructions for mounting

• For Engine Driven Fans

• Made in USA

7

HIGH PERFORMANCE V8ENGINE COOLANT SILICONE

PLUMBING KIT

High Tech, High Flow Engine Coolant Plumbing!

Designed for all engines, however your application could require additional Northern Coolant Plumbing componentsdepending on the complexity.

Kit includes reinforced silicone connector hoses including straight, 90º and 45º tubes and mandrel bent, beadedaluminized steel, (to prevent corrosion) including straight and 135º tubes.

Northern Engine Coolant plumbing can be used on all engines, flat heads to Hemi’s. Its high tech cooling at anaffordable price.

V8 Engine Plumbing Kit.................................................................................................................................................................................................................................................................................. Z71051

8

HIGH PERFORMANCE ENGINECOOLANT HUMP HOSE CONNECTORSGreat for Northern High Performance Engine Coolant applications that are subject to

slight misalignment or vibration the Hump Hose design adds “forgiveness” to the

hose connection. The reinforced silicone Hump Hose works with all coolant types.

1 1/2” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71040

1 3/4” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71041

2” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71042

2 1/2” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71043

3” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71044

3 1/2” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71045

4” Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z71046

TURBO INTER COOLER & CHARGEAIR COOLER HOSETurbo Car, Turbo Diesel Truck, all your intake after-turbo connections

are high temp. Northern’s Nomex/Aramid reinforced charge air cooler

hose has stainless steel reinforcement rings for blow-out and leak

protection. Good to 500º F, these hoses secure your high performance airintake system. Used on Turbo Race Cars, High Performance, Street Vehicles

and Diesel Trucks.

3” Charge Air Cooler Hose . . . . . . . . . . . . . . . . . . . . . . . . .Z71047

3 1/2” Charge Air Cooler Hose . . . . . . . . . . . . . . . . . . . . . .Z71048

4” Charge Air Cooler Hose . . . . . . . . . . . . . . . . . . . . . . . . .Z71049

9

75˚ STAINLESS STEEL TUBE1 1⁄2” Dia. ............................................Z710621 3⁄4” Dia. ............................................Z71063

45˚ STAINLESS STEEL TUBE1 1⁄2” Dia. ............................................Z710641 3⁄4” Dia. ............................................Z71065

STRAIGHT STAINLESS STEEL TUBE1 1⁄2” x 3” Dia. ....................................Z710661 3⁄4” x 3” Dia. ....................................Z71067

High flow mandrel bent stainless steel give’s your cooling system a great look! Beaded on both ends andpre-bent coolant hose connections. Polishable stainless steel.

*All measurements are approximate.

4”

4”

4”

4”

90˚ STAINLESS STEEL TUBE1 1⁄2” Dia. ............................................Z710601 3⁄4” Dia. ............................................Z71061

POLISHABLE STAINLESS STEEL PLUMBING

3”

4”

4”

10

1 Header kit fits all engines. Tubes aredesigned to fit all engines, Small Block Chevy,Big Block Chevy, Hemi, etc. without additionalbends. Northern Maxflow exhaust kits aredesigned for open wheel cars, roadsters, sprintcars, etc... Each kit contains 8 mandrel bent 16gauge aluminized steel primary tubes and 2slip fit collectors.These kits are designed to use Northern 3/8”thick water jet cut header flanges.

Here’s the deal, Buy the header kit with theprimary tube dimension you need, then buy the3/8” Northern Header flanges for your engine. That’s it. Weld up theflanges and collectors then you have a custom ultra duty high flowexhaust system.

NORTHERN MAXFLOW EXHAUST KITS

HEADER TUBE KITS FORSMALL BLOCK ENGINES1 1/2” Small Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55001

1 5/8” Small Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55002

1 3/4” Small Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55003

HEADER TUBE KITS FOR BIGBLOCK ENGINES1 7/8” Big Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55004

2” Big Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55005

HEADER TUBE KIT FOR RACEOR SUPERCHARGED ENGINES2 1/8” Big Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55006

2 1/4” Big Block Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z55007

Northern’s Maxflow Exhaust kitsare offered in 7 different

diameters. Choose the right sizefor your application!

11

SMALL BLOCK GM

Part #: Z55022

289/302 5.0L SMALL BLOCK FORD

Part #: Z55024

4.6L/5.4L FORD

Part #: Z55026

GM LS1, LS2, LS6, LS7

Part #: Z55028

GM LT1 D-PORT

Part #: Z55030

BIG BLOCK GM326-455 D-PORT PONTIAC

Part #: Z55023

87-95 5.0L FORD

Part #: Z55025

348/409 GM

Part #: Z55027

330-455 OLDSMOBILE

Part #: Z55031

351C FORD

Part #: Z55033

Part #: Z55021

351M-400 FORD

Part #: Z55036

429/460 FORD

Part #: Z55035

FORD ENGINE

GM ENGINE

3/8” THICK HEADER FLANGE KITS

12

273/318/340/360 MOPAR

5.7L HEMI LEFT & RIGHT

Part #: Z55032

Part #: Z55020

383/361/440 CHRYSLER

Part #: Z55029

3/8” THICK HEADER FLANGE KITS

290-401 AMC

332-428FE FORD

Part #: Z55038

426 HEMI CHRYSLER

Part #: Z55037

Part #: Z55039

Part #: Z55034

Here’s why Northern’s Header Flange is better!3/8” Thick, Water Jet Cut, Precision Header Flange for better seal.

Header Seal means horsepower, and Race Header seal requires beefy flangesto mate to red hot exhaust ports.

So check it out, what do you want on your HOT ROD?If you want cheesy stuff, see our competitors. If you want all the horsepower youpaid for, see Northern! Here’s an untouched comparison photo of our 3/8” plate

steel water jet cut header flange vs their, well, wimpy alternative!

428CJ 68-70 FORD

CHRYSLER ENGINE

FORD ENGINE

AMC ENGINE

Competitor Northern

13

OVERALL: 20 ½” x 24 ½” x 27 ½”Overall width including the brackets

INLET:OUTLET:ELECTRIC FAN SHROUD:PART #: 205185

1968-1974 JAVELIN, AMX

OVERALL: 25 ¼” x 22 1/8” x 27”Overall width including the brackets

INLET:OUTLET:ELECTRIC FAN SHROUD:PART #: 205186

1955-1959 CHEVY PICKUP

OVERALL: 27 ¾” x 20” x 25”Overall width including the brackets

INLET:OUTLET:ELECTRIC FAN SHROUD:PART #: 205187

1940 FORD DELUXE W/GM ENGINE

ALL PRO RADIATORS

14

Front of Vehicle

Measure the condenser or radiator before installation and use the largest fan that will easily fit.Radiator

Pusher fan

Radiator orA/C Condenser

Dimensions Only

Puller fan

NFS Fan Fan. # of AMP Fan Assembly DimensionsPart # Type Dia. Blades

CFMDraw A B C

BM346962 Pull 4” 5 147 4 4 1/4” 4 1/4” 2 3/8”BM346963 Pull 7.5” 10 440 15 7” 7 1/4” 2 1/16”

MINI FANSThese Mini Fans are great for small applications. Use on external oil coolers, ATV Radiators, Motorcycle Radiators and more. Puller Fan only. Spal Fan.

BM346945 Pull 10” 10 650 6.4 10 9/16” 11 1/4” 2 1/16”BM346947 Pull 12” 10 870 7 12 5/8” 13 1/4” 2 1/16”BM346949 Pull 14” 10 960 6.3 14 7/16” 15 1/16” 2 1/16”BM346951 Pull 16” 10 1300 7.5 15 3/4” 16 1/4” 2 1/16”

LOW PROFILENorthern’s slim-line option in electric fans offers sleek design where clearance may be an issue. Puller Fan only. Spal Fan.

BM346946 Pull 10” 5 1070 10 10 5/8” 11 1/4” 3 3/4”BM346948 Pull 12” 10 1360 13.5 12 5/8” 13 1/4” 3 3/8”BM346950 Pull 14” 10 1720 16.3 14 7/16” 15 1/16” 3 3/8”BM346952 Pull 16” 10 2070 17.4 15 3/4” 16 1/4” 3 3/8”BM346953 Pull 16” 10 3000 26 15 3/4” 16 1/4” 3 5/8”

Ultra duty high CFM fan. Get extra cooling capacity with these high CFM fans. Puller fan only. Spal Fan.

BM346937 Pull 10” 10 900 6.5 9 1/2” 10 1/2” 2 3/8”BM346938 Pull 12” 10 1000 7.5 12” 13 3/4” 2 1/4”BM346939 Pull 14” 10 1300 14 14 1/2” 15” 3 1/2”BM346940 Pull 16” 10 1600 16 16” 17” 3 3/4”

ECONOMYUse as a primary fan to free up wasted horsepower and extend waterpump life. Puller fan only.

BM346955 Push 12” 10 1230 11.8 12 5/8” 13 1/4” 2 1/2”BM346959 Pull 12” 10 1230 11.8 12 5/8” 13 1/4” 2 1/2”BM346956 Push 14” 10 1280 9.9 14 1/2” 15” 2 1/2”BM346960 Pull 14” 10 1280 9.9 14 1/2” 15” 2 1/2”BM346957 Push 16” 10 1610 11.0 15 3/4” 16 3/8” 2 1/2”BM346961 Pull 16” 10 1610 11.0 15 3/4” 16 3/8” 2 1/2”

PERFORMANCEGreat Performance in pusher or puller style fan. Adds cooling capacity to avoid overheating. Spal Fan.

HURRICANE

ELECTRIC COOLING FANS

15

“D”

“E”

“C”

“F”“A”

FAN SHROUD SPECIFICATIONS

Z40002 2 3/4" 5/8" 1/2" 18 1/8" 22 3/8" 2 5/8" 11" 18 2600Z40003 2 3/4" 5/8" 1/2" 18 1/8" 26" 2 5/8" 12" 14 2400Z40004 2 3/4" 1/2" 1/2" 17 1/4" 28" 2 5/8" 12" 14 2400Z40005 2 3/4" 5/8" 5/8" 18 1/8" 27 3/8" 2 5/8" 12" 14 2400Z40006 2 3/4" 1/2" 1/2" 17 3/8" 25 3/4" 2 5/8" 12" 14 2400Z40007 2 3/4" 1/2" 1/2" 17 1/4" 22 1/8" 2 5/8" 10" 26 2500Z40010 2 3/4" 1/2" 1/2" 17 5/8" 27 1/4" 2 5/8" 12" 14 2400Z40012 2 3/4" 3/4" 1/2" 18" 28 1/8" 2 5/8" 12" 14 2400Z40013 2 1 1/8" 1/2" 1/2" 17 5/8" 21 3/4" 3" 10" 26 2500Z40014 2 3/4" 3/4" 1/2" 17 1/2" 24" 2 5/8" 11" 18 2600Z40015 2 1 1/4" 1/2" 1/2" 17 5/8" 23 5/8" 3 1/8" 11" 18 2600Z40016 2 3/4" 1/2" 1/2" 17 3/8" 25 3/4" 2 5/8" 10" 26 2500Z40040* 2 3/4" 1/2" 1/2" 17 3/8" 25 3/4" 2 5/8" 12" 14 2400Z40043* 2 3/4" 1/2" 5/8" 17 3/8" 25 3/4" 2 5/8" 12" 14 2400Z40046* 2 3/4" 1/2" 1/2" 17 1/4" 22 1/8" 2 5/8" 10" 26 2500Z40049* 2 1 1/8" 1/2" 1/2" 17 5/8" 21 3/4" 3" 10" 26 2500Z40052* 2 3/4" 3/4" 1/2" 17 1/2" 24" 2 5/8" 11" 18 2600Z40058* 1 1/2" ----- 1/2" 18" 15 1/4" 3 1/8" 14" 10 1280Z40061* 1 3/4" 1/2" 1/2" 17 3/8" 20 1/2" 4 1/8" 16" 22 2360Z40066 2 3/4" 5/8" 1/2" 18 1/8" 22 1/8" 2 5/8" 11" 18 2600Z40067 1 3/4" 5/8" 1/2" 15" 21 1/8" 4" 14" 17 1720Z40069 2 3/4" 5/8" 1/2" 24" 14 7/8" 2 5/8" 11" 18 2600Z40070 2 3/4" 3/4" 1/2" 17 1/2" 25 3/4" 2 5/8" 12" 14 2400

Part # # of Fans A B C D E F Fan Size Total AMP Total CFM

* Black powder-coat finish. / **

Draw

“B”

16

FAN SHROUD SPECIFICATIONS

* Black powder-coat finish. / **

Z40071 2 3/4" 5/8" 1/2" 15" 26" 2 5/8" 12" 14 2400Z40073** 1 3/4" 5/8" 1/2" 18 1/4" 17" 4 1/4" 16" 22 2360Z40074** 1 3/4" 5/8" 1/2" 18 1/8" 20 5/8" 4" 16" 22 2360Z40075** 2 3/4" 5/8" 1/2" 18 1/8" 22 3/8" 4 3/8" 11" 25(1) 2780Z40076** 2 3/4" 5/8" 1/2" 18 1/8" 26" 4 3/8" 12" 29(1) 3260Z40081 2 3/4" 5/8" 1/2" 14 7/8" 22 1/8" 2 5/8" 10" 26 2500Z40082** 2 3/4" 1/2" 1/2" 17 3/8" 25 3/4" 4 3/8" 12" 29(1) 3260Z40083** 2 3/4" 1/2" 1/2" 17 3/8" 27 1/4" 4 3/8" 12" 29(1) 3260Z40084** 1 3/4" 1/2" 1/2" 17 3/8" 20 1/2" 4 1/4" 16" 22 2360Z40085** 2 3/4" 3/4" 1/2" 18 1/4" 28 1/8" 4 3/8" 12" 29(1) 3260Z40086** 2 1 1/8" 1/2" 1/2" 17 5/8" 21 3/4" 4 7/8" 10" 20 2140Z40087** 2 1 1/4" 1/2" 1/2" 17 5/8" 23 5/8" 3 7/8" 11" 25(1) 2780Z40088 2 3/4" 1/2" 1/2" 17 3/8" 20 1/2" 2 5/8" 10" 26(1) 2500Z40089** 1 1 1/4" - 1/2" 17 1/2" 15 3/4" 3 3/4" 14" 17 1720Z40090** 2 3/4" 3/4" 1/2" 17 1/2" 24 1/8" 4 1/2" 11" 25(1) 2780Z40091** 2 3/4" 5/8" 1/2" 18 1/8" 20 3/4" 2 5/8" 10" 26 2500Z40092** 2 3/4" 5/8" 1/2" 15" 26" 4 3/8" 12" 29(1) 3260Z40093** 2 3/4" 1/2" 1/2" 17 1/4" 22 1/8" 4 1/4" 10" 20 2140Z40094** 2 3/4" 5/8" 1/2" 18 3/8" 19" 4 1/4" 10" 20 2140Z40095** 2 3/4" 5/8" 1/2" 18 1/8" 22 1/8" 3 7/8" 11" 25(1) 2780Z40096 1 1/2" ------ 1/2" 18" 15 1/4" 3 1/8" 14" 10 1280Z40097 1 1" 3/4" 1/4" 20 5/8" 16 3/8" 4 1/4" 16" 22 2360Z40098 2 3/4" 5/8" 1/2" 18 3/8" 19" 2 5/8" 10" 26 2500Z40099** 2 3/4" 1/2" 1/2" 17 1/4" 28" 4 1/4" 12" 29(1) 3260Z40100 2 1 5/8” 1/2” 1/2” 14 7/8” 25 7/8” 3 5/8” 12” 14 2400Z40101 2 1 5/8” 1/2” 1/2” 14 7/8” 25 7/8” 4 7/8” 12” 29(1) 3260Z41035 1 3/4” 5/8” 1/2” 18 1/4” 19” 4” 16” 22 2360Z41036 2 3/4” 1/2” 1/2” 17 1/4” 33 5/8” 3 1/8” 16 26 3220Z41037 1 1” 3/4” 1/4” 20 5/8” 16 3/8” 4” 16” 26 3000Z41038 2 3/4” 5/8” 1/2” 14 7/8” 22 1/8” 4 1/4” 10” 26 2140

Part # # of Fans A B C D E F Fan Size Total AMP Total CFMDraw

For the latest in fan applications and new additions visit Northern on the web at:

www.northernfactory.com

(1) Due to higher Amp draw, this fan must be used with Z41030 wiring harness!

17

Wiring harness for fan assemblies that draw 40 or more amps. For Hurricane Fans.Prevents overheating at low speeds. Includes temperature sensor.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z41032

DUAL RELAY 40A+ W/SENSOR

Northern coolant temp switch. Use with Northern Fan relay kits Z40080 & Z41030.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z18346

TEMP SENSOR

Great for positioning mounting studs to prevent rubbing on radiator andcreating holes or stress cracks.

2 Pack, 3” x 3 3/16” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RW0178-43

SQUARE RUBBER MOUNT PADS

Filler neck tee cooling system remote fill. 1 1/4” or 1 1/2” hose sizes.

1 1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z17641

1 1/2” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z12006

FILLER NECK TEE

Billet weld on filler neck for tube applications. (Has saddle for pipe fitting)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z17640

BILLET WELD ON FILLER NECK

18

1 1/4” Hose Tee w/ 3/8” NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z17642

Single Pack 3/8” NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z17643

HOSE TEE

New High Static Pressure electric cooling fans developed to improve airflow in applicationssuch as diesel trucks, buses, racing and off-road vehicles.The new AP90 High Output series fans overcome the high static pressure that results when alarge air mass is forced through a single or multi-stacked radiator core. As the flowing air isrestricted by the density of the core, a pressure differential occurs and the cooling fan mustwork harder to overcome it.

16” Fan w/AP90 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BM346965

12” Paddle Fan w/AP90 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . .BM346966

Louvered Panels, for weld in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Z12011

STEEL LOUVER PANEL KIT

Turns Transmissioin Cooler Fan on/off at 185º. Runs cooling fan only whenTransmission Oil Temperature is over 185 degrees .

Transmission Temperature Fan Controller Kit . . . . . . . . . . . . . . . . . . . . .Z18348

TRANSMISSION TEMPERATUREFAN CONTROLLER KIT

AP90 HIGH STATIC PRESSUREFAN & MOTOR