1 We offer to you high grade > Quality of products and services > Logistics value added services > Commercial support > Staff knowing that our success depends on yours Features > Extremely compact design with convenient mounting styles > Equipped with “touch safe” terminal blocks > High attenuation characteristics over a broad frequency spectrum > Available in very low leakage current > Current rating coverage up to 180A / 680VAC & UL-approved > Filters do provide drop-in replace ability against industry standard EMI filters Applications > Industrial 3 phase systems > Conventional and regenerative motor drives, elevators, Cranes, UPS systems, machine tools, robotics, automation machinery, and many more Why to choose Delta? > World class leading manufacturer of EMI filter products – 27 years experience > Listed on Forbes Asian Fab 50 of most successful companies in Asia > Owner of countless Vendor-of-the year awards of leading multinationals > Environmental consciousness in our culture and corporate disciplines Powerful in > Production capacity > Design support and flexibility > Offering market compliant products against beneficial conditions > Rapid turn around time for approval samples We facilitate your EMI testing & engineering Quality • Reliability • Excellence
2009 EMI Filter News for Industrial 3 Phase systems
Aug 09, 2015
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
We offer to you high grade > Quality of products and services > Logistics value added services > Commercial support > Staff knowing that our success depends on yours
Features > Extremely compact design with convenient mounting styles > Equipped with “touch safe” terminal blocks > High attenuation characteristics over a broad frequency spectrum > Available in very low leakage current > Current rating coverage up to 180A / 680VAC & UL-approved > Filters do provide drop-in replace ability against industry standard EMI filters
Applications > Industrial 3 phase systems > Conventional and regenerative motor drives, elevators, Cranes, UPS systems, machine tools, robotics, automation machinery, and many more
Why to choose Delta? > World class leading manufacturer of EMI filter products – 27 years experience > Listed on Forbes Asian Fab 50 of most successful companies in Asia > Owner of countless Vendor-of-the year awards of leading multinationals > Environmental consciousness in our culture and corporate disciplines
Powerful in > Production capacity > Design support and flexibility > Offering market compliant products against beneficial conditions > Rapid turn around time for approval samples
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
2
EMI FILTER TDV-1 series
* Option for high voltage 520VAC is available with “HV” suffix
Specification is subject to change without notice
Figure
Dimension
Schematics
INTRODUCTION
> For three phase systems (Power supplies, UPS, elevators, robots etc.) and motor drives up to 50m cable length > Broadband attenuation from 150kHz to 30MHz
> Very Compact and slim design
> Touch safe terminal blocks
> Compliance with class A limits
SPECIFICATION
> 3 phase 3 wire system > Filter stage 1 stage
> Voltage rating 480VAC/520VAC* > Terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH [mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
07TDVST2-1 7 162x42x72 Terminal block <30
16TDVST2-1 16 222x47x72 Terminal block <30
30TDVST2-1 30 242x52x87 Terminal block <30
42TDVST2-1 42 282x52x87 Terminal block <30
55TDVST2-1 55 222x87x92 Terminal block <30
75TDVST2-1 75 202x122x66 Terminal block <30
100TDVST2-1 100 240x90x150 Terminal block <30
130TDVST2-1 130 240x90x150 Terminal block <30
180TDVST2-1 180 350x120x170 Terminal block <30
07TDVST2-1
Insertion loss (common mode)
07TDVST2-1
42TDVST2-1
55TDVST2-1
30TDVST2-1
75TDVST2-1
100TDVST2-1
130TDVST2-1
0 10 20 30 40 50 60 70 80
0.01 0.1 1 10 100frequency (MHz)
dB
180TDVST2-1
16TDVST2-1
Insertion loss (differential mode)
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100
frequency (MHz)
dB
42TDVST2-1
55TDVST2-1
30TDVST2-1
75TDVST2-1
100TDVST2-1
130TDVST2-1
180TDVST2-1
16TDVST2-1
07TDVST2-1
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
3
EMI FILTER TDRT2-1 series
* Option for voltage 480VAC is available for 50A and 80A with “A” suffix
Specification is subject to change without notice
INTRODUCTION
> For conventional and regenerative motor drives, elevators, cranes, UPS
> High broadband attenuation from 9kHz to 30MHz
> Slim book style
> Touch safe terminal blocks
> Enables compliance with class B limits
Figure
Dimension
Schematics
SPECIFICATION
> 3 phase 3 wire system > Filter stage 1 stage
> Voltage rating 520VAC/480VAC* > Screw type, terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH [mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
35TDRT2-1 35 305x60x150 Terminal block <48.9
50TDRT2-1 50 300x80x185 Terminal block <66.1
80TDRT2-1 80 350x90x220 Terminal block <71.5
110TDRT2-1 110 350x90x220 Terminal block <71.5
150TDRT2-1 150 400x110x240 Terminal block <71.5
50TDRT2-1-A 50 300x80x185 Terminal block <66.1
80TDRT2-1-A 80 350x90x220 Terminal block <71.4
Insertion loss (differential mode)
36TDRT2-1
50TDRT2-1
80TDRT2-1
150TDRT2-1
110TDRT2-1
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100
frequency (MHz)
dB
Insertion loss (common mode)
35TDRT2-1
50TDRT2-1
80TDRT2-1
110TDRT2-1
150TDRT2-1
0 10 20 30 40 50 60 70 80
0.01 0.1 1 10 100frequency (MHz)
dB
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
4
EMI FILTER TDSS series
* Option for high voltage 690VAC is available with “HV” suffix
Specification is subject to change without notice
Figure
Dimension
Schematics
INTRODUCTION
> High-power filter up to 180A for High-power motor drives, inverters and converters (>180A on request) > For High-power motor drives, inverters and converters, industrial 3-phase- systems, installations, large UPS etc. > Model for 690VAC IT power networks available
> Extremely compact with minimum space requirement
> Compliance with class A limits
SPECIFICATION
> 3 phase 3 wire system > Filter stage 3 stage
> Voltage rating 520VAC/690VAC* > Output connection: Screw type
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH [mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
150TDSS64 150 300x160x120 Screw on <6
180TDSS64 180 300x160x120 Screw on <6
Insertion loss (common mode)
180TDRST2
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100
frequency (MHz)
dB
Insertion loss (differential mode)
01020304050607080
0.01 0.1 1 10 100frequency (MHz)
dB
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
5
EMI FILTER TYT8, TYS10 series
Max. leakage under normal circumstances. Note: if two phases are interrupted, worst-case leakage current could reach 6.0 times higher level.
Specification is subject to change without notice
Figure
Dimension
Schematics
INTRODUCTION
> For general purpose: AC motor drive, machine tools, robot, UPS etc.
> Low leakage current
> Compliant with IEC 60950
> High attenuation of common mode and differential mode
SPECIFICATION
> 3 phase 4 wire system > Filter stage 1 stage
> Voltage rating 440/250VAC > Terminal block, screw type
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH max.
[mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
16TYT8 16 142x107x82 Terminal block <0.43
25TYT8 25 142x107x82 Terminal block <0.43
36TYT8 36 142x107x82 Terminal block <0.43
50TYT8 50 144x124x104 Terminal block <0.43
100TYT8 100 212x162x132 Terminal block <1.33
150TYS10 150 302x162x132 Screw on <8.0
Insertion loss (common mode)
16TYT8
25TYT8
36TYT8
50TYT8
100TYT8
150TYS10
0
10
20
30
40
50
60
70
0.01 0.1 1 10 100
frequency (MHz)
dB
Insertion loss (differential mode)
16TYT8 25TYT8
36TYT8
50TYT8
100TYT8150TYS10
0
10
20
30
40
50
60
70
0.01 0.1 1 10 100
frequency (MHz)
dB
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
6
EMI FILTER TYT8-1 series
Specification is subject to change without notice
Figure
Dimension
Schematics
INTRODUCTION
> For three phase systems (industrial machinery)
> Compact design
> High attenuation
> Very low leakage current
> According to machinery tool standard EN 50370-1
SPECIFICATION
> 3 phase 4 wire system > Filter stage 1 stage
> Voltage rating 520/300VAC > Touch safe terminal blocks
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH [mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
08TYT8-1 8 110x82x70 Terminal block <1
16TYT8-1 16 110x82x70 Terminal block <1
25TYT8-1 25 130x90x85 Terminal block <1
36TYT8-1 36 130x90x85 Terminal block <1
64TYT8-1 64 140x115x115 Terminal block <1
80TYT8-1 80 170x135x125 Terminal block <1
120TYT8-1 120 210x140x125 Terminal block <1
160TYT8-1 160 200x160x130 Terminal block <1
Insertion loss (common mode)
25TYT8-1
16TYT8-1
08TYT8-1
36TYT8-1
64TYT8-1 80TYT8-1
120TYT8-1
160TYT8-1
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100frequency (MHz)
dB
Insertion loss (differential mode)
16TYT8-1
08TYT8-1
36TYT8-1
25TYT8-1
64TYT8-1
80TYT8-1
120TYT8-1
160TYT8-1
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100frequency (MHz)
dB
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
7
EMI FILTER TYT8-2 series
Specification is subject to change without notice
Figure
Dimension
Schematics
INTRODUCTION
> For industrial machinery
> Compact design
> Very high attenuation
> Low leakage current
> For machines in mixed/domestic environments (class A/B)
SPECIFICATION
> 3 phase 4 wire system > Filter stage 2 stage
> Voltage rating 520/300VAC > Terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
MODEL CURRENT RATING
[A]
DIMENSION LxWxH [mm]
MOUNTING STYLE
LEAKAGE CURRENT
[mA]
8TYT8-2 8 120x115x80 Terminal block <1
16TYT8-2 16 120x115x80 Terminal block <1
25TYT8-2 25 130x125x115 Terminal block <1
36TYT8-2 36 130x125x115 Terminal block <1
64TYT8-2 64 160x125x125 Terminal block <1
80TYT8-2 80 230x135x125 Terminal block <1
120TYT8-2 120 250x140x140 Terminal block <1
160TYT8-2 160 280x140x170 Terminal block <1
We facilitate your EMI testing & engineering
Quality • Reliability • Excellence
Insertion loss (common mode)
08TYT8-1
16TYT8-2
36TYT8-225TYT8-2
64TYT8-2 80TYT8-2
120TYT8-2
160TYT8-2
200TYT8-2
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100frequency (MHz)
dB
Insertion loss (differential mode)
08TYT8-2
08TYT8-2
36TYT8-225TYT8-2
64TYT8-280TYT8-2
120TYT8-2
200TYT8-2
160TYT8-2
0
10
20
30
40
50
60
70
80
0.01 0.1 1 10 100frequency (MHz)
dB
8
Our MissionTo provide innovative, clean and efficient Energy solutions for a better tomorrow
Contact: Christian Schweder R & D Manager, EMC Solutions Delta Electronics German office: Coesterweg 45, D-59494 Soest Phone: +49 (0) 2921-987 626 Fax: +49 (0) 2921-987 620 Mobile: +49 (0) 170-7683 096 Email: [email protected]
> ISO 9001 certified> IS0 14001 certified > Green partner > TS 16949 certified > OHSAS 18001 certified > CSA22.2 No.8 self-testing accredited
Manufacturing plant in Thailand
Quality • Reliability • Excellence
Rene Winkelman Business Development & Sales Manager Delta Electronics European Headquarters: Zandsteen 15, NL- 2132 MZ Hoofddorp The Netherlands Phone: +31(0) 20 655 0921 Fax: +31(0) 20 655 0999 Mobile: +31(0) 65085 9644 Email: [email protected]
European Headoffice Amsterdam
EMI Competence Center Soest, Germany
We support you with: EMI-Consulting EMI-measurements according
to EN-standards (EN55011, EN55022, EN 61800-3 etc.)
Delta Lab Facility Onsite (200Amp max.)
Related Documents
