+12v Constant = +12v Acc. Switch = -12v Chassis Ground= +12v Illumination = Antenna/Amp Remote = Can-Bus (H)= Can-Bus (L)= LF+ = LF- = RF+ = RF- = LR+ = LR- = RR+ = RR- = Dash Type : Double Din Aftermarket Type: Single/Double Din Kit: GM1598B Harness: GM21SR/GM22SR Antenna Adapter: CRAB/CRARB Interface Adapter(s): AXIPGMLAN About the Vehicle Make: Buick Model: Lucerne Year: 2006-09 In Dash Application Wire Color Codes Speaker Notes Front Speaker Sizes Rear Buick Lucerne NOTES Dimensions: Dimensions: W= 8.5'' L= 5.75'' D= NOTES Rear Deck: 6x9'' Midrange Speaker Adapter: SA69 Speaker Harness: TBA Factory Assembly: (4) 9/32” bolts securing speaker. Standard/Optional CD player In-Dash 6 disc changer Harmon Kardon Sound System (280 watt) Navigation System Satellite Radio 6 Speaker System Aux Input MP3 compatible W= 5-5/8'' L= 7-1/8'' D= 2-7/8'' Type: Standard Audio System Location: At Speaker Speaker Sizes A Pillar: 1'' Tweeter Lowr Door: 6 1/2” Midrange Speaker Adapter: SAGMHR6 Speaker Harness: TBA Factory Assembly: (1) 9/32” bolt securin speaker. When installing aftermarket 5 ¼" or 6 ½" a speaker adapter is needed. 2006-09
2
Embed
2006-09 Buick Lucerne - Scosche Notes Front Speaker Sizes Rear Buick Lucerne S Dimensions: Dimensions: W= 8.5'' L= 5.75'' D ... Using a PRT pry the tweeter out of the "A" pillar. 1.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
When installing aftermarket 5 ¼"or 6 ½" a speaker adapter is needed.
2006-09
Buick LucerneImages
Front Speakers
Radio removal
Front Speakers
Rear Speakers
1. Using a panel removal tool remove the trim bezelaround the radio and HVAC controls.2. Extract (3) 9/32" bolts securing the HVAC controlsto the dash. Disconnect and remove.3. Extract (4) 9/32" bolts securing the radio to the dash. Disconnect and remove.
Radio
Recommended: Disconnect negative battery cable
1. Using a PRT remove the screw cover located atthe top of the "A" pillar. Extract (1) PHS from behindthe screw cover.2. Pull the top of the "A" pillar out and then pull upwards to release it from the dash. Disconnectand remove.3. Using a PRT pry the tweeter out of the "A" pillar.
1. Using a small hook tool remove the screw coverlocated inside the door release handle trim bezel.Extract (1) PHS from behind that screw cover.2. Using a PRT remove the entire door panel.Disconnect and remove.3. Extract (1) 9/32" bolt securing the speakeradapter to the door steel. Disconnect and remove. to the door steel. Disconnect and remove
Rear Deck
"A" Pillar
Lower Door
1. Using a PRT remove the screw covers (1) on each "C" pillar) located at the top of the "C" pillar. Extract1 PHS from behind each screw cover. Using a PRTremove each "C" pillar.2. Using a PRT remove (2) panel fasteners each one is located behind the rear seat head rests. Pull the head rest back to expose the panel fasteners.3. Lift the entire rear deck up then pull it out toremove.4. Extract (4) 9/32" bolts securing the speaker to the rear deck. Disconnect and remove.