2005 Kawasaki ZX6R - PCIII USB - 1 i218-411 www.powercommander.com 2005 Kawasaki ZX6R Installation Instructions Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com Parts List 1 Power Commander 1 USB Cable 1 CD-ROM 1 Installation Guide 1 Power Adapter 2 Power Commander Decals 2 Dynojet Decals 2 Dual lock Velcro ® Strip 1 Alcohol Swab You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com The ignition MUST be turned OFF before installation! PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Button Adjustment Display Faceplate Buttons USB Port Expansion Port
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2005 Kawasaki ZX6R - PCIII USB - 1i218-411 www.powercommander.com
2005 Kawasaki ZX6RInstallation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Dual lock Velcro® Strip1 Alcohol Swab
You can also download the PowerCommander software and latest mapsfrom our web site at:
www.powercommander.com
The ignition MUST be turnedOFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
USB PortExpansion Port
1. Remove the tail section byremoving the undertail andremoving the six screws for thetail section.
2 Prop the front of the fuel tankup.
3 Lay the PCIII in the tail sectionand route the harness along sidethe stock wiring harness towardsthe throttle bodies (Fig. B&C).
Fig.
AFi
g. B
Fig.
C
2005 Kawasaki ZX6R - PCIII USB - 2i218-411 www.powercommander.com
PCIII harness
PCIII harness
Remove these screws
4. Disconnect the stock wiring har-ness from the LOWER injectorsat the throttle bodies (Fig. D).
5. Plug the PCIII connectors in-lineof the stock injectors and wiringharness.
ORANGE - cylinder 1YELLOW - cylinder 2GREEN - cylinder 3BLUE - cylinder 4
6. Locate the Throttle PositionSensor connector behind thethrottle bodies. This is aWHITE 3 pin connector (Fig. F)
Fig.
DFi
g. E
Fig
F
2005 Kawasaki ZX6R - PCIII USB - 3i218-411 www.powercommander.com
PCIII connectors
TPS connector
Disconnect
Stock connectors
7. Plug the PCIII harness in-line ofthe stock wiring harness(Fig. G).
8. Attach the ground wire from thePCIII to the negative side of thebattery (Fig. H).
9 Bolt down the fuel tank.
10 Reinstall the tail section.
Fig.
GFi
g. H
2005 Kawasaki ZX6R - PCIII USB - 4i218-411 www.powercommander.com
PCIII connectors
Ground wire from PCIII
Stock connectors
Related Documents
