2004-2005 Yamaha R1 - PCIII USB - 1 i411-411 2004-2005 Yamaha R1 Installation Instructions Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com Parts List 1 Power Commander 1 USB Cable 1 CD-ROM 1 Installation Guide 1 Power Adapter 2 Power Commander Decals 2 Dynojet Decals 2 Velcro ® Strip 1 Alcohol Swab You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com The ignition MUST be turned OFF before installation! PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Button Adjustment Display Faceplate Buttons USB Port Expansion Port
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2004-2005 Yamaha R1 - PCIII USB - 1i411-411
2004-2005 Yamaha R1Installation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab
You can also download the PowerCommander software and latest mapsfrom our web site at:
www.powercommander.com
The ignition MUST be turnedOFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
USB PortExpansion Port
1 Remove the main seat and thepassenger seat.
2 Prop the front of the fuel in theup position.
3 Lay the PCIII in the tail sectiontemporarily. Route the wiresunder the tail section and gotowards the front of the bike.
4 Locate the connector from themain wiring harness to the injector rail and uplug this connector (Fig. A).
NOTE: This connector is grey in color.
5 Plug the connectors from thePCIII in-line of the stock wiringharness (Fig. B).
6 Bolt the fuel tank down intoposition.
7 Remove the two bolts on the lefthand side of the battery holddown bracket and loosen theright hand bolts enough to routethe PCIII harness underneath it(Fig. C).
8 Reinstall the bracket.
Fig.
AFi
g. B
Fig.
C
2004-2005 Yamaha R1- PCIII USB - 2i411-411 www.powercommander.com
View from top
PCIII connectors
Stock connectors
Unplug this connector
Route the harnessunderneath this bracket
PCIII harness
9 Attach the ground wire from thePCIII to the negative side of thebattery (Fig. D).
10 Install the PCIII in the rear section of the trunk using thesupplied velcro (Fig. E). Makesure to clean both surfaces withalcohol first.
11 Make sure all the wires are routed properly.
12 Reinstall the main seat and thepassenger seat.
Fig.
D
2004-2005 Yamaha R1 - PCIII USB - 3i411-411 www.powercommander.com
Fig.
E
Ground wire from the PCIII.
Related Documents
