20 24 AUGUST 2018 PROCESS FLOWSHEET · PDF fileDistillation Columns in CHEMCAD Suite Methods to Converge Reluctant Columns in CHEMCAD Heterogeneous Azeotropic Distillation

W H O S H O U L D

A T T E N D

Chemical Engineers

and Chemical

Technicians involved in

process design, process

simulation, process

engineering;

plant mass and energy

balances,

Including all current and

prospective CHEMCAD

users

G E N E R A L S C O P E

C O U R S E C O N T E N T

The basic theoretical background to

process flowsheet simulation, includ-ing flowsheet techniques, modeling techniques, thermodynamics, and control systems. The presentation includes hands-on solution of exam-ple problems in order to illustrate the various industry applications for pro-cess simulation.

No previous experience in the use of CHEMCAD is required, but some background in flowsheet simulation is desirable. A discussion/question/answer format is also employed in order to

maximize retention of course material and theoretical concepts.

Persons attending the training should expect to leave the course with a basic working knowledge of CHEM-CAD, and process flowsheet simula-tion techniques .

Chempute Software will provide training venue, computers, training dongles, printed training notes, teas, lunches, course certificate.

2 0— 2 4 A U G U S T 2 0 1 8

P R O C E S S F L O W S H E E T S I M U L A T I O N U S I N G C H E M C A D

Introduction Process Fundamentals & CHEMCAD Basic Navigation Thermodynamics Process Modelling – Selection of Thermodynamic Methods Guidance Note Piping Systems Solving Pipe & Header Networks using CHEMCAD Sizing Tools-Pipes, Pumps, Meters & Valves Distillation Distillation Columns in CHEMCAD Suite Methods to Converge Reluctant Columns in CHEMCAD Heterogeneous Azeotropic Distillation Integrated Chemical Engineering Software – Ethanol Dehydration Crude Oil Distillation Heat Transfer Process Modelling and Design of Shell & Tube Heat Exchangers Emergency Relief Systems Relief & Blowdown in Multipurpose Batch Plant Emergency Relief System Sizing Software – Methods & Practice Relief Device Sizing Tool – Validation Cases Dynamic Modelling Process Modelling and Control of Batch Reactors in the Fine Chemicals Industry Batch Reactors Thermal Design & Performance

Introduction Process Fundamentals & CHEMCAD Basic Navigation Thermodynamics Process Modelling – Selection of Thermodynamic Methods Guidance Note Piping Systems Solving Pipe & Header Networks using CHEMCAD Sizing Tools-Pipes, Pumps, Meters & Valves Distillation Distillation Columns in CHEMCAD Suite Methods to Converge Reluctant Columns in CHEMCAD Heterogeneous Azeotropic Distillation Integrated Chemical Engineering Software – Ethanol Dehydration Crude Oil Distillation Heat Transfer Process Modelling and Design of Shell & Tube Heat Exchangers Emergency Relief Systems Relief & Blowdown in Multipurpose Batch Plant Emergency Relief System Sizing Software – Methods & Practice Relief Device Sizing Tool – Validation Cases Dynamic Modelling Process Modelling and Control of Batch Reactors in the Fine Chemicals Industry Batch Reactors Thermal Design & Performance

Complete the registration form and fax it to 031 764 5934 or e-mail

through to [email protected].

Acknowledgement will be faxed or e-mailed back to you.

Final confirmation of your booking and all details of the course will be faxed or e-mailed to you only on receipt of full payment for the course.

Form to be completed by each delegate

By signing and returning this form, you will be registered on the

course and will be liable for payment. Please ensure that you have

proper authorisation to do this.

Cancellations are accepted in writing and without penalty up to 14

days prior to the start of the training.

Delegates cancelling in writing between 7 and 14 days prior to the start of the training will be liable for 25% of the training cost.

Delegates cancelling in writing less than 7 days prior to the start of the training will be liable for 50% of the training cost.

Full Payment needs to be received by Chempute Software prior to the training.

In case of insufficient delegates for the training, Chempute Software may cancel this course. In this case, registered delegates will be noti-fied, and any payments will be refunded.

H O W T O E N R O L

C O N D I T I O N S O F R E G I S T R A T I O N

P R E S E N T E R

Theresh Pather

Managing Director of TSR Con-sulting Engineers, is a Profes-

sional Process Engineer (PrEng)

with over 15 years of combined

experience in the fields of Pro-

cess Plant Operation, Plant De-

sign, and Project Management.

He holds a Master’s degree in

Chemical Engineering and has performed research into Coal

Pyrolysis. In addition, he holds

a Chartered Engineer status

from IChemE.

This included Management/

Lead engineering roles on sev-

eral projects. His level of expe-rience coupled with his qualifi-

cations and achievements

would enable him to comforta-

bly excel in any process indus-

try. He has a strong affinity for

achieving high quality results

within budget and schedule

restrictions in a design environ-ment or to exceed production

targets in a plant operation

environment.

D E L E G A T E S I N F O R M A T I O N :

Title: ______ Surname: _______________________ First Name:_______________________ Full Company Name: _______________________ Job Title: ________________________ Vat Registration Number: ______________________ Postal Address (to which invoice must be sent): _________________________________________________________________________________ _________________________________________ Code: __________ Tel: (_____)___________________Fax: (___)___________________Cell: ______________________ E-mail: ________________________________________ Special Dietary Requirements: ________________________________ Contact/Accounts Information: Title: ______ Surname: _______________________ First Name:________________________ Tel: (_____) _________________ Fax: (_____) __________________ E-mail: _______________________________________ Cost of Course: 1st Delegate R 15,900 + VAT 2nd / Additional Delegates from same Company less 10% I have read and agreed to all the conditions of enrolment and payment as stipulated in this registra-tion form: Signature: ___________________________ Date:___________________

C O U R S E N A M E D A T E S

Process Flowsheet Simulation using Chemcad 20-24 August 2018

T I M E S D U R A T I O N

8:00 a.m.—4:30 p.m. 5 Days

L O C A T I O N C P D P O I N T S

Chempute Software / Unit G14 5

Pinewood Office Park, Pinewood Square,

33 Riley road,

Woodmead, Sandton

D I R E C T I O N S T O T H E V E N U E :

Chempute Software, Unit G14, Pinewood Square, Pinewood Office Park,

33 Riley road, Woodmead, Sandton

Telephone: 031 764 6840 / 011 803 6559 for directions.

D I R E C T I O N S F R O M P R E T O R I A :

Get on N1 from Francis Baard St/N4 and Exit 145 Take N1

Continue on N1. Drive from Pretoria Main Rd to Sandton.

Take exit 100-Sandton from N1 Western Bypass

Use the right lane to merge onto Rivonia Rd/M9

Use the right 2 lanes to turn right onto Witkoppen Rd

Turn right onto Bowling Ave

Turn left at the 1st cross street onto Riley Rd

D I R E C T I O N S F R O M J O H A N N E S B U R G :

Take M31 and Houghton Dr to De Villiers Graaff Motorway/M1

Follow De Villiers Graaff Motorway/M1 to Woodmead Dr/R55 in Sandton. Take exit 29 from De Villiers Graaff Motorway/M1

Use the left 2 lanes to turn left onto Woodlands Dr

Turn right onto Lincoln St

Turn left onto Plymouth St

Plymouth St turns right and becomes Hillman St

Continue onto Riley Rd