REF. 752 2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 F4/F5 Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]Date : 12/19 Rev.15 Page 1 sur 12 Information provided as an indication and subject to possible modification PRODUCT EVOLUTION Be careful, our valves Ref.752 are changing We currently have 2 different types available (according to DN) with different body painting : Old type with black painting : New type with blue painting : At the end, only the new type with blue painting will be available
12
Embed
2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 … · 2 pieces split body ball valve flanged pn16/40 icp din 3202 f4/f5 ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
REF. 752
2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 F4/F5
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 12/19 Rev.15 Page 1 sur 12
Information provided as an indication and subject to possible modification
PRODUCT EVOLUTION
Be careful, our valves Ref.752 are changing
We currently have 2 different types available (according to DN) with different body painting :
Old type with black painting : New type with blue painting :
At the end, only the new type with blue painting will be available
2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 F4/F5
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 12/19 Rev.15 Page 2 sur 12
Information provided as an indication and subject to possible modification
2 pieces carbon steel split body ball valve ICP with full bore for Chemical industries, petrochemical industries, hydraulic installation, heating, water distribution, compressed air. Ball valve with firesafe certificate ISO 10497 to reduce risks in case of fire. Fugitive emission according to EN 15848-1 :2006 for an excellent tightness on the stem and to prevent external leakage. PTFE seat for a temperature up to +230°C. Compatible with explosive atmosphere, ATEX Zone 1&21 and Zone 2&22 thanks to the antistatic device. Handling possible with gearbox or stainless steel handle. Thanks to the ISO 5211 plate, an actuator can be installed on the valve.
2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 F4/F5
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 12/19 Rev.15 Page 11 sur 12
Information provided as an indication and subject to possible modification
STANDARDS :
Fabrication according to ISO 9001:2015
DIRECTIVE 2014/68/EU : CE N° 0035 Risk Category III module H
Certificate 3.1 on request
Valve designing according to EN 1983 – ISO 17292
Pressure Tests according to EN 12266-1, Rate A
Marking according to EN 19
Fire safe according to ISO 10497 : 2004
Fugitive Emissions according to EN 15848-1 : 2006
Flanges R.F. according to EN 1092-1 PN16/40
ISO 5211 mounting pad and stem size according to EN 15081
Length according to EN 558 series 27 ( DIN 3202 F4 up to DN100, DIN 3202 F5 over )
ATEX Group II Category 2 G/2Dc Zone 1 & 21 Zone 2 &22 ( optional marking ) according to directive 2014/34/EU
ADVICE : Our opinion and our advice are not guaranteed and SFERACO shall not be liable for the consequences of damages. The customer must check the right choice of the products with the real service conditions.
2 PIECES SPLIT BODY BALL VALVE FLANGED PN16/40 ICP DIN 3202 F4/F5
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 12/19 Rev.15 Page 12 sur 12
Information provided as an indication and subject to possible modification
INSTALLATION INSTRUCTIONS
GENERAL GUIDELINES :
Ensure that the valves to be used are appropriate for the conditions of the installation (type of fluid,pressure and temperature).
Be sure to have enough valves to be able to isolate the sections of piping as well as the appropriate equipment for maintenance and repair.
Ensure that the valves to be installed are of correct strenght to be able to support the capacity of their usage.
Installation of all circuits should ensure that their function can be automatically tested on a regular basis (at least two times a year).
INSTALLATION INSTRUCTIONS :
Before installing the valves,clean and remove any objects from the pipes (in particular bits of sealing and metal) which could obstruct and block the valves.
Ensure that both connecting pipes either side of the valve (upstream and downstream) are aligned (if they’re not,the valves may not work correctly).
Make sure that the two sections of the pipe (upstream and downstream) match,the valve unit will not absorb any gaps.Any distortions in the pipes may affect the thightness of the connection,the working of the valve and can even cause a rupture.To be sure,place the kit in position to ensure the assembling will work.
If sections of piping do not have their final support in place,they should be temporarily fixed.This is to avoid unnecessary strain on the valve.
Tighten the bolts in cross.
It’s recommended to operate the valve ( open and close ) 1 to 2 times per year