Page 1
1
PROGRAM SCHEDULE (general) Please note that the program schedule is still subjected to changes
+ 14 August 2012 GENERAL SESSION (8:00 – 11:30) - Location: Main auditorium (1st floor), Building A, Ton Duc Thang University
+ 8:00 – 9:00 : On-site registration & Music performance + 9:00 – 9:35 : Opening remarks + 9:35 – 10:00 : Coffee break + 10:00 – 11:30 : 2 plenary speakers
LUNCH BUFFER (12:00 – 13:30) - Location: outside the main auditorium (1st floor), Building A. 3 PARALLEL SESSIONS (13:30 – 17:10) - SESSION A1
Location: Room A104 (1st floor), Building A + 13:30 – 15:00: 3 presentations (including 1 keynote speaker) + 15:00 – 15:30: Coffee break + 15:30 – 17:10: 4 presentations
- SESSION B1 Location: Meeting room B (Ground floor), Building B
+ 13:30 – 15:10: 4 presentations + 15:10 – 15:30: Coffee break + 15:30 – 16:55: 3 presentations
- SESSION C1 Location: Meeting room C (Ground floor), Building C
+ 13:30 – 15:10: 4 presentations + 15:10 – 15:30: Coffee break + 15:30 – 17:10: 4 presentations
+ 15 August 2012 GENERAL SESSION (8:00 – 10:00) - Location: Main auditorium (1st floor), Building A
+ 8:00 – 9:30: 2 plenary presentations + 9:30 – 10:00: Coffee break
3 PRESENTATIONS AT SESSIONS (10:00 – 11:45) - SESSION A2
Location: Room A104 (1st floor), Building A + 10:00 – 11:45: 3 presentations (including 2 keynote speakers)
- SESSION B2
Page 2
2
Location: Meeting room B (Ground floor), Building B + 10:00 – 11:40: 4 presentations
- SESSION C2 Location: Meeting room C (Ground floor), Building C
+ 10:00 – 11:40: 4 presentations LUNCH BUFFER (12:00 – 13:30) - Locations: outside the session rooms (A104, Meeting room B, Meeting room C). 3 PARALLEL SESSIONS (13:30 – 17:25) - SESSION A3
Location: Room A104 (1st floor), Building A + 13:30 – 15:00: 3 presentations (including 1 keynote speaker) + 15:00 – 15:30: Coffee break + 15:30 – 17:25: 4 presentations (including 1 keynote speaker)
- SESSION B3 Location: Meeting room B (Ground floor), Building B
+ 13:30 – 15:10: 4 presentations + 15:10 – 15:30: Coffee break + 15:30 – 17:10: 4 presentations
- SESSION C3 Location: Meeting room C (Ground floor), Building C
+ 13:30 – 15:10: 4 presentations + 15:10 – 15:30: Coffee break + 15:30 – 17:10: 4 presentations
GALA DINNER (19:00 – 21:30) - Location: Hall Event, Kim Do Hotel, 133 Nguyen Hue Street, District 1 + 16 August 2012 3 PARALLEL SESSIONS (8:00 – 11:15) - SESSION A4
Location: Room A104 (1st floor), Building A, Ton Duc Thang University + 8:00 – 9:30: 3 presentations (including 1 keynote speaker) + 9:30 – 10:00: Coffee break + 10:00 – 11:15: 3 presentations
- SESSION B4 Location: Meeting room B (Ground floor), Building B
+ 8:00 – 9:40: 4 presentations + 9:40 – 10:00: Coffee break + 10:00 – 11:15: 3 presentations
- SESSION C4 Location: Meeting room C (Ground floor), Building C
Page 3
3
+ 8:00 – 9:30: 3 oral presentations + 9:30 – 10:00: Coffee break + 10:00 – 11:15: 3 oral presentations
GENERAL SESSION (11:30 – 12:00) - Location: Main auditorium (1st floor), Building A
+ 11:30 –12:00: Closing remarks by ACOME chairman
LUNCH BUFFER (12:00 – 13:30) - Location: outside the session rooms (A104, the meeting room B, the meeting room C).
17 August 2012
+ Travel and visit HoChiMinh city and Nha Trang
Page 4
4
PROGRAM SCHEDULE (in details)
+ 14 August 2012
GENERAL SESSION (8:00 – 11:30)
Location: Main auditorium (1st floor), Building A, Ton Duc Thang University
Time Content (Title) Speaker Affiliation
8:00-8:30 On-site registration Receptionists Ton Duc Thang University
8:30-9:00 Music Performance Singers
8:30-8:50 President of TDT University receives 10 scientists (Plenary + Keynote speakers)
9:00-9:15 Welcome Statement and Introduction of Guests
MC Ton Duc Thang University
9:15-9:20 Opening address by ACOME Chairman Prof. Nguyen Thien Tong
Ton Duc Thang University
9:20-9:25 Opening address by President of TDT University
Prof. Le Vinh Danh Ton Duc Thang University
9:25-9:30 Opening address by the Representative of NAFOSTED and Ministry of Science and Technology
Representative of NAFOSTED and or Ministry of Science and Technology
9:30-9:35 Opening address by President of Vietnam General Confederation of Labour
Dr. Dang Ngoc Tung President of Vietnam General Confederation of Labour
9:35-10:00 Coffee break
Scientific Program (Chairs: Nguyen Thien Tong & Nguyen Dang Hung)
10:00-10:45 Mechanical characterization of materials and diagnosis of structures by inverse analyses: Some innovative procedures and applications.
Giulio Maier (Plenary speaker)
Polytechnique University of Milano, Italy
10:45-11:30
Archetype-blending continuum (ABC) theory
Wing Kam Liu (Plenary speaker)
Northwestern University, USA
LUNCH BUFFER (12:00 – 13:30)
Location: outside the main auditorium (1st floor), Building A.
Page 5
5
3 PARALLEL SESSIONS (13:30 -17:25)
SESSION A1: 14 August 2012 Location: Room A104 (1st floor), Building A
Time Content (Title) Speaker Affiliation
Session Chairs: Dang Van Ky & Claude Stolz (Computational Fracture and Damage Mechanics)
13:30-14:10 New methods in fatigue of structures Dang Van Ky (Keynote speaker)
Ecole Polytechnique, Paris, France
14:10-14:35 On the rate boundary value problem for damage modelization by thick level-set
Claude Stolz Ecole Polytechnique, Paris, France
14:35 - 15:00 Evaluation of strain energy based damage indices for flexural crack detection of RC beams
David P. Thambiratnam
Queensland University of Technology, Australia
15:00 -15:30 Coffee break
Session Chairs: Wing Kam Liu & Alexander M. Korsunsky (Computational Mechanics of Materials and Structures)
15:30 - 15:55 Plastic collapse mechanisms in thin disks subject to thermo-mechanical loading
Sergei Alexandrov
A. Ishlinskii Institute for Problems in Mechanics, Russia
15:55 - 16:20 Homogenization towards a gradient plasticity model – from meso to macro
Leong Hien Poh National University of Singapore, Singapore
16:20- 16:45 A gradient-damage model for viscoplastic plates under impulsive loadings: Experimental and computational aspects
Nguyen An Danh Institute of General Mechanics, RWTH-Aachen, Germany
16:45- 17:10 Multi-scale model to predict the ballistic impact behavior of multi-layer plain-woven fabrics
Ha Minh Cuong Laboratory of Lille, CNRS UMR 8107, University of Lille, France
SESSION B1: 14 August 2012 Location: Meeting room B (Ground floor), Building B
Time Content (Title) Speaker Affiliation
Session Chairs: Nguyen Thien Tong & Sergei Alexandrov (Computational Fluid Mechanics)
13:30-13:55 A recent Eulerian-Lagrangian CFD methodology for modelling direct injection diesel sprays
Khuong Anh Dung
Polytechnique University of Valencia, Spain
13:55-14:20 Effect of sediments and icebergs on Truong Hoang Research Engineer, Westminster,
Page 6
6
tsunamis Vinh Phuong USA
14:20 - 14:55 CFD aerodynamic analysis of 5 MW wind turbine considering wind shear and yaw error
Tran Thanh Toan
Gyeongsang National University, Korea
14:55-15:10 Calculation of longshore sediment transport in the swash zone with application to shoreline change modeling
Le Xuan Hoan Toyohashi University of Technology, Japan
15:10 -15:30 Coffee break
Session Chairs: David P. Thambiratnam & Nguyen Dinh Kien (Computational Solids and Structural Mechanics)
15:30 - 15:55 Analytical expressions of buckling loads for two-layer Timoshenko members with interlayer slips
Nguyen Quang Huy
Structural Engineering Research Group, INSA de Rennes, France
15:55 - 16:20 Diagnosis of beam-damage location using neural networks and wavelet analysis
Nguyen Sy Dzung
Inha University, Korea
16:20 - 16:55 Large deflection analysis of functionally graded Euler-Bernoulli beams with variable cross section
Nguyen Dinh Kien
Institute of Mechanics, Vietnam
SESSION C1: 14 August 2012 Location: Meeting room C (Ground floor), Building C
Time Content (Title) Speaker Affiliation
Session Chairs: Pham Duc Chinh & Sofia A. Alisjahbana (Computational Solids and Fluid Mechanics)
13:30-13:55 Blast loaded stiffened orthotropic concrete plates
Sofia W. Alisjahbana
Bakrie University, Indonesia
13:55-14:20 Impact and compression after impact behavior prediction of variable angled tow laminates
Dang Dinh Thi
Advanced Composite Centre for Innovation and Science (ACCIS), Queen’s Building, University Walk, BS8 1TR, UK
14:20 - 14:45 Finite element modeling of a magnetorheological brake considering hysteresis
Nguyen Phuong Bac
Inha University, Korea
14:45– 15:10 Design of a flow-mode magneto-rheological suspension system for washing machines
Nguyen Quoc Hung
Inha University, Korea
15:10 -15:30 Coffee break
Session Chairs: Pham Hong Giang & Buntara S. Gan (Isogeometric Analysis)
15:30 - 15:55 Isogeometric analysis based heterogeneous multiscale method
Hoang Tuong Ton Duc Thang University, Vietnam
Page 7
7
15:55 - 16:20 An application of concentration of loads on a ship structure using in isogeometric analysis
Le Tat Hien University of Technology, Vietnam National University, HCM City, Vietnam
16:20 – 16:45 A mixed Nurbs-based isogeometric approach for incompressible media problems
Tran Vinh Loc
Ton Duc Thang University, Vietnam
16:45 - 17:10 Isogeometric limit analysis for plane stress problems
Thai Hoang Chien
Ton Duc Thang University, Vietnam
+ 15 August 2012 GENERAL SESSION
Location: Main auditorium (1st floor), Building A, Ton Duc Thang University
Time Content (Title) Speaker Affiliation
Session Chairs: Giulio Maier & Wing Kam Liu
8:00-8:45 On duality, symmetry and symmetry lost in solid mechanics
Bui Huy Duong (Plenary speaker)
Ecole Polytechnique, Paris, France
8:45-9:30
S-FEM for fracture problems, theory, formulation and application
Gui-Rong Liu (Plenary speaker)
University of Cincinnati, USA
9:30 - 10:00 Coffee break
Location: Outside of the main auditorium (1st floor), Building A, Ton Duc Thang University
3 PARALLEL SESSIONS (10:00 – 11:45) SESSION A2: 15 August 2012
Location: Room A104 (1st floor), Building A
Time Content (Title) Speaker Affiliation
Session Chairs: Nguyen Dang Hung & Manfred Staat (Limit and Shakedown Analysis – Theory and Computation)
10:00-10:40 Limit and shakedown analysis under uncertainty
Manfred Staat (Keynote speaker)
Aachen University of Applied Sciences, Germany
10:40-11:20 Reduced shakedown formulation in plane stress problems
Pham Duc Chinh (Keynote speaker)
Institute of Mechanics, Vietnam
11:20 - 11:45 FEM based shakedown analysis of hardening structures
Pham Phu Tinh Hanoi Architecture University, Vietnam
Page 8
8
SESSION B2: 15 August 2012
Location: Meeting room B (Ground floor), Building B
Time Content (Title) Speaker Affiliation
Session Chairs: Alexander M. Korsunsky & Tran Kim Khoa (Numerical and Experimental Modeling of Concrete Structures)
10:00-10:25 Research on solution to strengthen concrete T beams reinforced with carbon fiber reinforced polymer composites
Hoang Phuong Hoa Danang University of Technology, Vietnam
10:25-10:50 Simulation of spalling behavior of concrete due to rebar corrosion using RBSM
Tran Kim Khoa Nagoya University, Japan
10:50 - 11:15 A computational method for nonlinear analysis of reinforced concrete frame structures
Tran Ngoc Linh Technische Universität Darmstadt, Germany
11:15 -11:40 A simplified model to simulate the non linear behavior of reinforced concrete column
Nguyen Xuan Huy University of Transport and Communications, Vietnam
SESSION C2: 15 August 2012
Location: Meeting room C (Ground floor), Building C
Time Content (Title) Speaker Affiliation
Session Chairs: Hikaru Nakamura & Nguyen Dinh Giang (Computational Civil Engineering)
10:00-10:25 Design of a permanent structural health monitoring system on the Guadalquivir rail bridge based on baseline ambient vibration testing sensor placement and optimal
Bui Tien Thanh University of Leuven, Belgium
10:25-10:50 Heat transfer and structural response modelling of concrete filled steel hollow section columns
Chu Thi Binh Hanoi Architecture University, Vietnam
10:50 - 11:15 A Simple Model for Calculation of Superstructure - Soil Interaction
Nguyen Huynh Tan Tai
Thu Dau Mot University, Vietnam
11:15 -11:40 Crack identification in functionally graded material plate by wavelet analysis of vibration mode
Lam Phat Thuan HCM City University of Technical Education Vietnam
Page 9
9
LUNCH BUFFET (12:00 – 13:30)
Location: outside the main auditorium (1st floor), Building A
3 PARALLEL SESSIONS (13:30 – 17:25) SESSION A3: 15 August 2012
Location: Room A104 (1st floor), Building A
Time Content (Title) Speaker Affiliation
Session Chairs: Claude Stolz & Gui-Rong Liu (Computational Mechanics of Materials and Structures)
13:30 - 14:10 Rich tomography techniques for the analysis of microstructure and deformation
Alexander M. Korsunsky (Keynote speaker)
University of Oxford, United Kingdom
14:10 - 14:35 Phenomenological and micromechanical models for high temperature creep of single crystal superalloys
Trinh Bach Tuyet Ruhr-University of Bochum, Germany
14:35 - 15:00 From diffuse to localized damage: the role of friction
Nguyen Dinh Giang University of Sydney, Australia
15:00-:15:30 Coffee break
Session Chairs: Dang Van Ky & Kok Keng Ang (Computational Dynamics)
15:30 - 16:10 Analysis of high-speed rail accounting for jumping wheel phenomenon
Kok Keng Ang (Keynote speaker)
National University of Singapore, Singapore
16:10 - 16:35 Hybrid frequency-time domain model for coupled sloshing-floating tank motion problem
Luong Van Tuyen National University of Singapore, Singapore
16:35 - 17:00 Numerical simulation of fully nonlinear wave radiation by submerged oscillating vertical cylinders
Kok Keng Ang
National University of Singapore, Singapore
17:00 – 17:25 Prediction of column and corewall shortenings in high-rise buildings using CEB-FIP90
Luong Van Hai University of Technology, Vietnam National University, HCM City, Vietnam
Page 10
10
SESSION B3: 15 August 2012
Location: Meeting room B (Ground floor), Building B
Time Content (Title) Speaker Affiliation
Session Chairs: Kok Keng Ang & Nguyen Thien Tong (Computational Mechanics of Materials and Structures)
13:30-13:55 A study on stress concentration effect in rapid evaluation of fatigue limit by numerical analysis
Ly Hung Anh University of Technology, Vietnam National University, HCM City, Vietnam
13:55-14:20 Representative volume element for plates with random microstructures
Nguyen Trung Kien
HCM City University of Technical Education Vietnam Mechanics
14:20 - 14:45 Ultimate strength analysis of steel plates using ISO/DIS 1872-2 and ULSAP
Nguyen Tien Dung
University of Transport and Communications, Vietnam
14:45-15:10 Matching asymptotic method and nucleation of a defect at a notch
Dang Thi Bach Tuyet
Ecole Polytechnique, Paris, France
15:10 -15:30 Coffee break
Session Chairs: Giulio Maier & Pham Hong Giang (Optimization and Inversed Problems)
15:30 - 15:55 Pile foundation layout design by using GA Buntara S. Gan College of Engineering, Nihon University, Japan
15:55 - 16:20 Multidisciplinary design optimization of helicopter rotor blades
Vu Ngoc Anh University of Technology, Vietnam National University, HCM City, Vietnam
16:20 - 16:45 Finite element analysis on temperature distribution of ethane storage tank concrete foundation – A case study
Thanongsak Imjai
Rajamangala University of Technology Taiwan, Thailan
16:45 - 17:10 Fire resistance estimation of an existing pre-stressed composite floor
Nguyen The Duong
Duy Tan University, Vietnam
SESSION C3: 15 August 2012
Location: Meeting room C (Ground floor), Building C
Time Content (Title) Speaker Affiliation
Session Chairs: Gui-Rong Liu & Leong Hien Poh (Computational Solids and Structural Mechanics)
13:30-13:55 A double-channel vertical solar chimney Nguyen Quoc Y
University of Technology, Vietnam National University, HCM City, Vietnam
13:55-14:20 Modeling of the mechanical behavior of MSWI bottom ash with the Mohr-Coulomb model: Using the finite element software CESAR-LCPC
Le Ngoc Hung
Université Lille Nord de France, France
Page 11
11
14:20 - 14:45 Dynamic response of cable stayed bridges under vehicles considering the moving masses
Nguyen Trong Phuoc
University of Technology, Vietnam National University, HCM City, Vietnam
14:45-15:10 Simulation of thermal fields of high voltage underground cables using the adaptive hp – Finite element method
Vu Phan Tu University of Technology, Vietnam National University, HCM City, Vietnam
15:10 -15:30 Coffee break
Session Chairs: Manfred Staat & Pham Duc Chinh (Computational Solids and Structural Mechanics)
15:30 - 15:55 Limit load computation of Mindlin-Reissner plates using the ES-DSG method and second-order cone programming
Le Van Canh International University, Vietnam National University, HCM City, Vietnam
15:55 - 16:20 An effective adaptive limit analysis of soil using FEM and second-order cone programming
Phung Van Phuc
Ton Duc Thang University, Vietnam
16:20 - 16:45 Limit analysis of cracked structures using XFEM and second-order cone programming
Tran Trung Dung
HCM City Open University, Vietnam
16:45 - 17:10 An improvement in implementation of the meshless method RBIEM
Bui Thanh Tu
Hanoi University of Science, Vietnam
BANQUET – GALA DINNER (19:00 – 21:30) - Locations: Hall Event, Kim Do Hotel, 133 Nguyen Hue Street, District 1
16 August 2012
3 PARALLEL SESSIONS (8:00 – 11:15) SESSION A4: 16 August 2012
Location: Room A104 (1st floor), Building A, Ton Duc Thang University
Time Content (Title) Speaker Affiliation
Session Chairs: Dong Qian & Huynh Dinh Bao Phuong (Computational Solid and Fluid Mechanics)
8:00-8:40 A static condensation reduced basis element approximation: Application to three-dimensional acoustic muffler analysis
Huynh Dinh Bao Phuong (Keynote speaker)
Massachusetts Institute of Technology (MIT), USA
8:40-9:05 Vertical and horizontal attenuation coefficients in ocean waves by dynamic water heights
Truong Hoang Vinh Phuong
Research Engineer, Westminster, USA
9:05-9:30 Computations of compound capillary jets Vu Van Truong Ritsumeikan University, Japan
9:30 - 10:00 Coffee break
Page 12
12
Session Chairs: Huynh Dinh Bao Phuong & Dong Qian (Computational Solid and Fluid Mechanics)
10:00 - 10:25 Coupled atomistic-continuum simulation of lattice dynamic fracture based on extended space-time FEM
Dong Qian
University of Cincinnati, USA
10:25- 10:50 Dynamic water stiffness, dynamic water damping and dynamic water mass for ship-water-interaction analyses
Truong Hoang Vinh Phuong
Research Engineer, Westminster, USA
10:50 –11:15 Model order reduction for Bayesian approach to inverse problems
Nguyen Ngoc Hien National University of Singapore, Singapore
SESSION B4: 16 August 2012
Location: Meeting room B (Ground floor), Building B
Time Content (Title) Speaker Affiliation
Session Chairs: Kihong Shin & Nguyen Quoc Hung (Computational Dynamics and Controls)
8:00-8:25 Suggestion on the conditions to activate the catenary action in the building frames further to an impact leading to the loss of a column
Luu Nguyen Nam Hai
Ton Duc Thang University, Vietnam
8:25-8:50 Aeroelasticity stability of a long-span suspension bridge by mechanically driven flap
Phan Duc Huynh HCM City University of Technical Education, Vietnam
8:50 - 9:15 Monitoring of cables tension using two dimensional vibratory orbits
Nguyen Thi Cam Nhung
ULB-University of Brussels, Belgium
9:15-9:40 Structural control of benchmark buildings equipped with variable stiffness devices and viscous fluid dampers
Pham Nhan Hoa International University, Vietnam National University, HCM City, Vietnam
9:40 -10:00 Coffee break
Session Chairs: Hikaru Nakamura & Nguyen Quoc Hung (Computational Dynamics and Controls)
10:00-10:25 Stochastic analysis coriolis dynamic vibration absorber by Karhunen Loeve expansion and partial linearization technique
La Duc Viet Institute of Mechanics, Vietnam
10:25-10:50 Improving long-span suspension bridge wind stability with active control winglets
Phan Duc Huynh HCM City University of Technical Education, Vietnam
10:50 - 11:15 A new measure of similarity between two time data in the frequency domain
Kihong Shin Andong National University, Korea
Page 13
13
SESSION C4: 16 August 2012
Location: Meeting room C (Ground floor), Building C
Time Content (Title) Speaker Affiliation
Session Chairs: Nguyen Dang Hung & Pham Khac Hung (Computational Structural and Fluid Mechanics )
8:00-8:40 Establishment of methodology for determination of the strength condition of fixed offshore jacket structures in deepwater basing on probabilistic model and reliability theory, and its application in Vietnamese sea condition
Pham Khac Hung National University of Civil Engineering, Vietnam
8:40-9:05 Analysis of shell structures by a cell-based smoothed discrete shear gap method using triangular elements
Nguyen Thoi Trung
Ton Duc Thang University, Vietnam
9:05– 9:30 An analysis of eccentrically stiffened plates by CS-DSG3 using triangular elements
Bui Xuan Thang University of Science, Vietnam National University, HCM City, Vietnam
9:30 -10:00 Coffee break
Session Chairs: Nguyen Dang Hung & Pham Khac Hung (Computational Structural and Solid Mechanics )
10:00-10:25 Analysis of shell structures via a smoothed four-node flat element
Nguyen Van Hieu HCM City University of Architecture, Vietnam
10:25 – 10:50 Geometrically nonlinear responses of a functionally graded beam on Winkler foundation under a moving harmonic load
Nguyen The Truong Phong
HCM City University of Technical Education, Vietnam
10:50– 11:15 Computational homogenization for multiscale crack modelling
Nguyen Vinh Phu Ton Duc Thang University, Vietnam
GENERAL SESSION (11:30 – 12:00) - Location: Main auditorium (1st floor), Building A
+ 11:30 –12:00: Closing remarks by ACOME Chairman, Prof. Nguyen Thien Tong
LUNCH BUFFET (12:00 – 13:30)
Location: outside the main auditorium (1st floor), Building A