1SPEVDU $BUBMPH - Best Materials · Concerning OSHA Requirements ... Fixed Ladders (1910.27) and ladders used in Construction Industry (1926.1053). ... OSHA LADDER CO.!

2010 Product Catalog

3 Office/Warehouse Locations

LADDER & SCAFFOLD

Distributed by: BEST MATERIALS LLC Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected]

Page 2 . . . . . . . . . . . .Ladder Safety Information

Page 3-10 . . . . . . . . . .Sunset Ladder Products

Page 11-12 . . . . . . . . .Wood Ladders

Page 13 . . . . . . . . . . .Ladder Accesories

Page 8-16 . . . . . . . . .Wing Enterprises “Little Giant Ladders”

Page 17-24 . . . . . . . . .Steel Scaffolding

Page 25 . . . . . . . . . . .Scaffold Safety Information

Page 25 . . . . . . . . . . .Sunset Aluminum Hook Decks

Page 26-35 . . . . . . . .Aluminum Scaffolding

Page 36-37 . . . . . . . .Advantage Kit Scaffolds

Page 38-39 . . . . . . . .Sunset Utility Scaffold

Page 40 . . . . . . . . . . .Aluminum Stages

Page 41 . . . . . . . . . . .Stage Handrails and Extension Planks

Page 42 . . . . . . . . . . .Sunset Aluminum Planks and Stages

Page 43-44 . . . . . . . .Stinson Planks and Ladder Jacks

Page 45-51 . . . . . . . .Steel Rolling Ladders and Access Ladders

Page 52-54 . . . . . . . .Safety Harnesses and Lanyards

CATALOG CONTENTS

1

Concerning OSHA Requirements

OSHA sets minimum national requirements for the use of ladders in business andindustry. In addition, many states have their own regulations under theOccupational Safety and Health Act that may be even more stringent. The statecodes will supersede the national OSHA standards within their own state. Usersshould check with their own state OSHA representative for the appropriaterequirements.

The adequacy of ladders and the work practices followed by employees usingthem are regulated by OSHA in four sections: Portable Wood (1910.25), PortableMetal (1910.26), Fixed Ladders (1910.27) and ladders used in Construction Industry(1926.1053). These sections specify the standards to which all portable laddersmust be manufactured, care and placement of ladders in the workplace and thesafe use of ladders on the job.

Concerning ANSI Requirements Depending on the material and type of lad-der, different ANSI safety codes apply. The ANSI codes are as follows:

Wood Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANSI A14.1Metal Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANSI A14.2Fixed Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANSI A14.3Fiberglass Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANSI A14.5

ANSI codes also have an established Duty Rating. This rating identifies whichportable Ladder is intended for the conditions under which the ladder can besafely used. The Duty Rating system is as follows:

TypeCapable of

Rated UseSupporting

TYPE 1A . . . . . . . . . . . . . . .300 lbs. . . . . . . . . . . . . . . .Extra Heavy Duty IndustrialTYPE 1 . . . . . . . . . . . . . . . .250 lbs. . . . . . . . . . . . . . . . . . .Heavy Duty IndustrialTYPE II . . . . . . . . . . . . . . . .225 lbs. . . . . . . . . . . . . . . . .Medium Duty CommercialTYPE lll . . . . . . . . . . . . . . . .200 lbs. . . . . . . . . . . . . . . . . . .Light Duty Household

Extensive testing and design requirements determine the appropriate Duty Ratingfor each ladder model. The rated load capacity includes the combined weight ofthe user, clothing, tools and any materials on the ladder. The tests requirementshave been specified with a safety factor of four to ensure the ability of the ladderto meet the Duty Rating. However, the ratings assume proper use of the ladder(especially relating to the placement angle) in order to support the specified load.

General Ladder SafetyA ladder is a tool like any other. If it is used properly and according to safetyguidelines, it will give many years of trouble free service. However, if proper cau-tions are not taken, a ladder can be involved in an accident. Please read and fol-low all instructions and labels accompanying each ladder.

Two factors that deserve particular attention are proper ladder selection andelectrical shock precautions:Pay close attention to the Duty Rating of the ladder and the combined weight ofthe user and materials. Select a ladder with the proper capacity. Also, be sure toselect a ladder of proper height to reach the work area without overextending.

Be aware of wires, electrical devices and live electrical circuits. Metal laddersconduct electricity and can create a danger of electrocution. Failure to read andfollow instructions regarding electrical safety could result in serious personalinjury or death.

Inspection Before Each Use1. Inspect upon receipt and before each use. Never climb a damaged,

bent or broken ladder all working parts must be in good working order.2. Make sure all rivets and joints, nuts and bolts are tight; feet, steps and

rungs are secure; spreaders and pail shelf function properly (on stepladders); and rung locks, rope and pulley are in good condition (onextension ladders).

3. Keep ladder clean, free from grease, oil, mud, snow, wet paint and otherslippery material. Keep your shoes clean. Leather soles should not be used.

4. Never make temporary repairs of damaged or missing parts.

5. Destroy ladder if damaged, worn or if exposed to fire or chemical corrosion.

General Precautions Before Each Use1. Read the instructions printed on the ladder and follow them. Ladders

are designed for one person. Exceptions are Double Front Step Ladders,which may be used by two people, one on each side. Duty Ratings stillapply for each side and should be carefully observed.

2. Never leave a ladder set up and unattended. Special care should betaken to keep children away from all ladders.

3. If you anticipate the use of chemicals or other possibly corrosivematerials, the ladder manufacturer should be consulted before use.

4. If you are in poor health, subject to fainting spells, have physicalhandicap that would impair your climbing ability, or if you are under theinfluence of any drugs or alcohol (including legal drugs that may causedrowsiness). you should not use a ladder.

5. Do not use in high winds or during a storm.

6. Stay focused on safety whenever you are on the ladder, and keep yourbody weight between the rails.

Proper Care & Storage of Ladders1. Store ladders in a safe, dry place.

2. Hang ladders on racks, at intervals of 6 feet for support.

3. Properly secure and support ladders while in transit.

4. Keep ladders clean and free of foreign materials.

5. Never store materials on ladders.

Step Ladders - Proper Set Up1. DANGER! Metal Conducts Electricity! Do not let ladders of any material

come in contact with live electrical wires.

2. Make sure ladder is fully open, spreaders secure, and pail shelf in position.

3. Place on firm level surface with a secure footing. Do not use on slipperysurfaces. Do not place on boxes, unstable bases or scaffolds to gainadditional height.. Do not place in front of door opening toward ladder.

Proper Climbing & Use1. Face ladder when climbing up or down, keep body centered between

side rails.

2. Maintain a firm grip. Use both hands in climbing.

3. Never climb a ladder from the side unless ladder is secure against sidewise motion, or climb from one ladder to another.

4. No not over reach, move ladder when needed.

5. Do not “walk” or “jog” ladder when standing on it.

6. Do not stand climb or sit on ladder top, pail shelf, braces, or back section.

7. Do not overload, ladders are meant for one person. Do not use as abrace, platform or plank.

8. Keep ladder close to work, avoid pushing or pulling off the side of ladders.

Extension Ladders - Proper Set Up1. DANGER! Metal Conducts Electricity! Do not let ladders of any material

come in contact with live electrical wires.

2. Secure base when raising extension and never set up ladder when it isextended.

3. Set single or extension ladder at proper 75-1/2 degree angle by bracingladder base a distance of 1/4 total working length of ladder away frombase of vertical support. If distance is less that 3 ft. place base ofladder a minimum of 3 ft. from vertical support.

4. Set ladder on firm ground. Do not lean sideways. Do not use on ice or snowor slippery or slippery surface without non-skid device or securing feet.

5. Erect ladder with minimum 3 ft. extending above roof line or workingsurface, the top at support points.

6. Extend top section only from ground, never by “bouncing” or from the roof.

7. So not overextend - maintain maximum required overlap of sectionsas follows:Ladder size up to and including 32’ - 3’ overlapLadder size over 32’ up to and including 36’ - 4’ overlapLadder size over 36’ up to and including 48’ - 5’ overlapLadder size over 48’’ - 6’ overlap

8. Place on a firm surface and secure footing. Do not use on slippery surfaces.Do not place on boxes, unstable bases or scaffolds to gain additional height.

9. Do not place in front of door opening toward ladder.

10. Where possible, use second person to hold ladder.

Proper Climbing & Use1. Securely engage ladder rung locks before climbing. Check that top and

bottom ends of ladder rails are firmly supported.

2. Face ladder when climbing up or down; keep body centered between rails.

3. Maintain a firm grip. Use both hands in climbing.

4. Never climb a ladder from the side unless ladder is secured against sidewise motion, or climb from one ladder to another.

5. Do not stand closer the 3 ft. from the top. Never climb above the top support.

6. Do not use ladder in high winds.

7. Never use ladder as a platform, plank or hoist. Never use ladder as a scaffold.

8. Do not overload. Ladders are meant for one person.

9. Keep ladder close to work; avoid pushing or pulling off to the side of ladders.

10. Never drop or apply an impact load to ladder.

11. Do not “walk” or “shift” ladder when standing on it.

MEETS

REQUIREMENTS

OSHA

SAFETY INFORMATION

2

F104 4’ 3” 161/ 2” 231/ 4” 11.5 $114.00

F105 5’ 3” 18” 301/4” 14 131.50

F106 6’ 3” 193/ 4” 36” 17.5 142.50

F108 8’ 3” 223/ 4” 483/ 4” 23 188.50

• Yellow Plastic Top With Tool Tray• Yellow Full Channel Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel External Spreaders

SUNSET TYPE 1 - 250 LB. DUTY RATED FIBERGLASS STEPLADDERS

SUNSET

F100 SERIES

SUNSET LADDER

• Metal Top With Tool Tray• Yellow Full Channel Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel External Spreaders

SUNSET

FY100 SERIES

• Massive Steel Top Plates• Yellow Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Spreaders

SUNSET

FD100 SERIES

DOUBLE STEP

LADDER CO.Since 1929

Sale

s and Service Second to None!

MEETS

REQUIREMENTS

OSHA

MEETS

REQUIREMENTS

OSHA

MEETS

REQUIREMENTS

OSHA

MODEL SIZE STEP BOTTOM APPROX APPROX LISTSIZE WIDTH SPREAD WEIGHT PRICE



FY104 4’ 3” 161/ 2” 231/ 4” 12.5 $120.00

FY105 5’ 3” 18” 301/ 4” 14.5 137.50

FY106 6’ 3” 193/ 4” 36” 18 148.50

FY108 8’ 3” 293/ 4” 483/ 4” 24 194.50

FD104 4’ 3” 191/ 2” 37” 19 $186.50

FD105 5’ 3” 221/ 2” 441/ 2” 20 212.00

FD106 6’ 3” 23” 51” 25 240.00

FD108 8’ 3” 251/ 2” 65” 35 330.00

FD110 10’ 3” 28” 78” 42 400.00

FD112 12’ 3” 31” 90” 54 488.00


Sale



Sale


“The Mesa”

“The Tempe”

“The Biltmore”

3Distributed by: BEST MATERIALS LLC Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected]

F1A03 3’ 3” 153/ 4” 18” 12.5 $120.00

F1A04 4’ 3” 171/ 4” 24” 14.5 130.00

F1A05 5’ 3” 18 1/ 2” 30” 18 148.00

F1A06 6’ 3” 20” 37” 19 168.50

F1A07 7’ 3” 211/ 2” 44” 22 198.00

F1A08 8’ 3” 231/ 4” 49” 25 224.00

F1A10 10’ 3” 26” 621/ 2” 34 345.00

F1A12 12’ 3” 291/ 4” 77” 46 425.00


SUNSET LADDER

MEETS

REQUIREMENTS

OSHA

• Molded Top Cap With Tool Tray• Orange Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Interior Spreaders• Molded Slip On Boots Prevent Rails From Splitting


Sale


SUNSET TYPE 1A -300 LB. DUTY RATED FIBERGLASS STEPLADDERS

FY1A03 3’ 3” 153/ 4” 18” 14 $122.00

FY1A04 4’ 3” 171/ 4” 24” 16 130.00

FY1A05 5’ 3” 18 1/ 2” 30” 20 148.00

FY1A06 6’ 3” 20” 37” 22 168.50

FY1A07 7’ 3” 213/ 4” 44” 25 198.00

FY1A08 8’ 3” 231/ 4” 49” 29 224.00

FY1A10 10’ 3” 26” 621/ 2” 35 345.00

FY1A12 12’ 3” 291/ 4” 77” 46 425.00


MEETS

REQUIREMENTS

OSHA

SUNSET

FY1A SERIES


Sale


FY1A03FB 3’ 3” 153/ 4” 18” 16 $140.00

FY1A04FB 4’ 3” 171/ 4” 24” 19 155.00

FY1A05FB 5’ 3” 18 1/ 2” 30” 24 180.00

FY1A06FB 6’ 3” 20” 37” 28 205.00

FY1A07FB 7’ 3” 22” 34” 32 248.00

FY1A08FB 8’ 3” 231/ 4” 49” 37 274.00

FY1A10FB 10’ 3” 26” 621/ 2” 48 380.00

FY1A12FB 12’ 3” 291/ 4” 77” 61 469.00


MEETS

REQUIREMENTS

OSHA

SUNSET

FY1AFB SERIES

• Metal Top Cap With Tool Tray• Yellow Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces Throughout• Gold Toned Steel Hardware• Heavy Duty Interior Spreaders


Sale


“The Tucson”

“The Flagstaff”

SUNSET

F1A SERIES

“The Phoenix”

• Metal Top Cap With Tool Tray• Yellow Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Interior Spreaders

4

SUNSET TYPE 1AA -375 LB. DUTY RATED FIBERGLASS STEPLADDERS

FY1AA03FB 3’ 3” 153/ 4” 18” 18 $140.00

FY1AA04FB 4’ 3” 171/ 4” 24” 20 155.00

FY1AA05FB 5’ 3” 18 1/ 2” 30” 25 180.00

FY1AA06FB 6’ 3” 20” 37” 27 205.00

FY1AA07FB 7’ 3” 22” 34” 30 248.00

FY1AA08FB 8’ 3” 231/ 4” 49” 33.5 274.00

FY1AA10FB 10’ 3” 261/ 2” 63” 39.5

FY1AA12FB 12’ 3” 293/ 4” 771/ 2” 52


MEETS

REQUIREMENTS

OSHA

SUNSET

FY1AAFB SERIES

• Metal Top Cap With Tool Tray

• Yellow Side Rails

• All Steel Rivet Construction

• Heavy Duty Steel Braces Throughout

• Gold Toned Steel Hardware

• Heavy Duty Interior Spreaders

• Reinforced Rail Shields


Sale


“The Flagstaff - EHD”

SUNSET TYPE 1AA- 375 LB. DUTY RATED FIBERGLASS DOUBLE STEP

FD1AA03 3’ 3” 153/ 4” 23” 18 $195.0

FD1AA04* 4’ 3” 171/ 4” 30” 22 208.00

FD1AA05* 5’ 3” 18 3/ 4” 373/ 4” 26 247.00

FD1AA06* 6’ 3” 20” 441/ 2” 30 285.00

FD1AA07 7’ 3” 211/ 2” 441/ 2” 34 340.00

FD1AA08* 8’ 3” 23” 581/ 2” 38 384.00

FD1AA10 10’ 3” 261/ 4” 71” 48 488.00

FD1AA12 12’ 3” 29” 86” 62 587.00

FD1AA14 14’ 3” 32” 104” 85 797.00

FD1AA16 16’ 3” 35” 1061/ 4” 100 917.00


MEETS

REQUIREMENTS

OSHA

SUNSETFD1AA SERIESDOUBLE STEP

*Center Pull Spreaders

• Massive Steel Top Plates

• Orange Side Rails

• All Steel Rivet Construction

• Heavy Duty Steel Braces

• Gold Toned Steel Hardware

• Heavy Duty Steel Interior Spreaders

• Spreader Brace Backup Plate

• Reinforced Rail Shields

“The SCOTTSDALE - EHD”


Sale


5

SUNSET TYPE 1A- 300 LB. DUTY RATED FIBERGLASS DOUBLE STEP

FD1A03 3’ 3” 153/ 4” 23” 16.5 $195.00

FD1A04* 4’ 3” 171/ 4” 30” 20.5 208.00

FD1A05* 5’ 3” 18 3/ 4” 373/ 4” 21.5 247.00

FD1A06* 6’ 3” 20” 441/ 2” 26 285.00

FD1A07 7’ 3” 211/ 2” 441/ 2” 30.5

FD1A08* 8’ 3” 23” 581/ 2” 37.5 384.00

FD1A10 10’ 3” 261/ 4” 71” 47 488.00

FD1A12 12’ 3” 29” 86” 56.5 587.00

FD1A14 14’ 3” 32” 104” 81 797.00

FD1A16 16’ 3” 35” 1061/ 4” 97.5 917.00


MEETS

REQUIREMENTS

OSHA

SUNSETFD1A SERIESDOUBLE STEP

*Center Pull Spreaders

• Massive Steel Top Plates• Orange Side Rails• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Interior Spreaders• Spreader Brace Backup Plate


Sale


“The SCOTTSDALE”

Special Order Type IAA 375 lb.FULLY BRACED Model FD1AFBAvailable at Additional Cost.

FSH1A04 4’ 8 $111.00

FSH1A05 5’ 9 133.00

FSH1A06 6’ 11.5 146.50

FSH1A08 8’ 14 195.00

FSH1A10 10’ 17.5 253.00

FSH1A12 12’ 21 300.00

FSH1A14 14’ 24.5 342.00

MODEL SIZE APPROX PRICEWEIGHT

MEETS

REQUIREMENTS

OSHA

SUNSETFIBERGLASS

SHELF LADDERS

SHELF LADDER FEATURES• Type 1A -300 lb. Duty Rating

• Non-Conductive Fiberglass

• Slip Resistant Feet

• Rubber Bumper

SUNSET

FP1A SERIES

FEATURES• Slip Resistant Platform

• Full Channel Fiberglass Rail

• Double-Rivet Step Construction

• Top Rail Guard

• Heavy Gusset Bracing


FP1A03 3’ 3” 22-3/4” 38” 17.5 $115.00

FP1A04 4’ 3” 22-1/4” 44” 20 145.00

FP1A05 5’ 3” 25-3/4” 50” 24.5 190.00

FP1A06 6’ 3” 27-1/4” 56” 31.5 239.00

FP1A08 8’ 3” 30-1/4” 68” 39.5

FP1A10 10’ 3” 33-1/4” 80” 50

FP1A12 12’ 3” 36-1/4” 92” 59.5 6

SUNSET FIBERGLASS PLATFORM LADDER


Sale

s and Service Second to None!MEETS

REQUIREMENTS

OSHA

“The Prescott”

6 Distributed by: BEST MATERIALS LLC Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected]

SUNSET TYPE 1-250 LB. DUTY RATED ALUMINUM DOUBLE STEP

AD102 2’ 3” 161/ 2” 23” 11 $109.00

AD103 3’ 3” 18 ” 30” 17 155.00

AD104 4’ 3” 191/ 2” 37” 19 170.00

AD105 5’ 3” 211/ 2” 441/ 2” 21 200.00

AD106 6’ 3” 23 ” 51” 24 220.00

AD108 8’ 3” 251/ 2” 65” 30 308.00

AD110 10’ 3” 281/ 2” 78” 38 410.00


MEETS

REQUIREMENTS

OSHA

SUNSET

AD1 SERIES

DOUBLESTEP

• Massive Steel Top Plates• Unique Side Rail Design• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Interior Spreaders


Sale


SUNSET TYPE 1A- 300 LB. DUTY RATED ALUMINUM DOUBLE STEP

AD1A03 3’ 3” 18 ” 30” 16 $170.00

AD1A04* 4’ 3” 193/ 4” 37” 22 195.00

AD1A05* 5’ 3” 211/ 4” 441/ 2” 25 230.00

AD1A06* 6’ 3” 221/ 4” 511/ 2” 29 274.00

AD1A07* 7’ 3” 241/4” 591/ 2” 32 330.00

AD1A08* 8’ 3” 251/ 2” 651/ 2” 36 378.00

AD1A10 10’ 3” 281/ 2” 78” 47 488.00

AD1A12 12’ 3” 311/ 2” 93” 61 612.00

AD1A14 14’ 3” 341/ 2” 1041/4” 70 745.00

AD1A16 16’ 3” 371/ 2” 116 1/ 2” 80 930.00


*Center Pull Spreader

MEETS

REQUIREMENTS

OSHA

SUNSET

AD1A SERIES

DOUBLESTEP

• Massive Steel Top Plates• Unique Side Rail Design• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Interior Spreaders


Sale


“The Kingman”

“The Winslow”

7

SAS 24 24” 3” 33” 21” 10 $115.00

SAS 30 30” 3” 34” 25” 13 145.00

SAS 36 36” 3” 35” 29” 15 190.00

SAS 48 48” 3” 36” 36” 20 239.00

8

SUNSET TYPE 1-250 LB. DUTY RATED ALUMINUM STEPLADDERS

SUNSET

AS100 SERIES

• Molded Top Cap With Tool Tray• Unique Side Rail Design• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Interior Spreaders

SUNSET TYPE 1A- 300 LB. DUTY RATED ALUMINUM STEPLADDERS

SUNSET LADDER

AS1A03 3’ 3” 18 ” 26” 14 $170.00

AS1A04 4’ 3” 193/ 4” 30” 16 195.00

AS1A05 5’ 3” 211/ 4” 36” 19 230.00

AS1A06 6’ 3” 223/ 4” 421/4” 22 274.00

AS1A07 7’ 3” 241/4” 47” 25 330.00

AS1A08 8’ 3” 253/ 4” 523/ 4” 28 378.00

AS1A10 10’ 3” 281/ 2” 651/ 2” 36 488.00

AS1A12 12’ 3” 311/ 2” 771/ 4” 46 612.00


MEETS

REQUIREMENTS

OSHA

SUNSET

AS1A SERIES

• Molded Top Cap With Tool Tray• Unique Side Rail Design• All Steel Rivet Construction• Heavy Duty Steel Braces• Gold Toned Steel Hardware• Heavy Duty Steel Interior Spreaders


Sale


“The Yuma”

“The Sedona”

MEETS

REQUIREMENTS

OSHA

SUNSETALUMINUMSAWHORSE

MEETS

REQUIREMENTS

OSHA

FEATURES

• Heavy Duty Aluminum Extrusion

• Solid Rivet Construction

• Non-Slip Rubber Boot

• Heavy-Duty Spreaders For LongTrouble-Free Use

• Folding Compact Design ForEasy Transportation


AS102 2’ 3” 161/ 2” 203/ 4” 7 $109.00

AS103 3’ 3” 18 ” 26” 91/ 2 155.00

AS104 4’ 3” 191/ 2” 30” 12 170.00

AS105 5’ 3” 211/ 2” 371/ 2” 14 200.00

AS106 6’ 3” 23 ” 43” 171/ 2 220.00

AS108 8’ 3” 251/ 2” 571/ 2” 23 308.00

AS110 10’ 3” 281/ 2” 681/ 2” 32 410.00


SUNSET LADDER


Sale



SUNSET FIBERGLASS SINGLES & EXTENSION LADDERS

FE1A16 13’ 35 $328.00

FE1A20 17’ 43 375.00

FE1A24 21’ 50 440.00

FE1A28 25’ 57 515.00

FE1A32 29’ 72 602.00

FE1A36* 32’ 82 729.00

FE1A40* 35’ 90 860.00

MODEL EXTENDED APPROX LISTLENGTH WEIGHT PRICE

*Denotes 250 LB Type 1 Duty Rating

• “D” Rung Construction• Orange Side Rails• Steel Swivel Shoes• Heavy Duty Steel Braces


Sale


FS1ASERIES SINGLE

TYPE 1A 300

SIZE

16’

20’

24’

28’

32’

36’

40’

9

MEETS

REQUIREMENTS

OSHALADDER CO.

Since 1929

Sale


MEETS

REQUIREMENTS

OSHA

FE1AA16 13’ 38 $328.00

FE1AA20 17’ 46 375.00

FE1AA24 21’ 54 440.00

FE1AA28 25’ 61 515.00

FE1AA32 29’ 75 602.00

FE1A40* 35’ 90 860.00

MODEL EXTENDED APPROX LISTLENGTH WEIGHT PRICESIZE

16’

20’

24’

28’

32’

• Plate and Rung Assembly are Riveted at Four Points to Each Side Rail to Allow forRung Replacement

• Durable Rail Shield and Shoe Bracket ProtectRail From Damage

• Mar-resistant Molded End Caps• Guides at Top of Base• Rugged Gravity Spring Locks Operate

Smoothly• Heavy Duty Metal Pulley with Rope• Internal Guides on Bottom of Fly Section

Securely Interlock Rails• Slip-resistant Round Serrated Rungs• Interlocking Side Rails• Steel Shoe with Slip-resistant Pad and Ice Pick

FE1ASERIES EXTENSION

TYPE 1A 300

FE1AASERIES EXTENSION

TYPE 1AA 375

FS1A08 8’ 22 $177.00

FS1A10 10’ 25 214.50

FS1A12 12’ 29 240.00

FS1A14 14’ 33 270.00

FS1A16 16’ 40 318.00

FS1A18 18’ 44 365.00

FS1A20 20’ 48 414.50

MODEL SIZE APPROX PRICEWEIGHT

• “D” Rung Construction• Orange Side Rails• Steel Swivel Shoes• Heavy Duty Steel Braces


Sale


MEETS

REQUIREMENTS

OSHA

OPTIONAL COMBINATIONPOLE GRIP & CABLE HOOK

A rigid plated “V” shaped pole gripcovered with rubber tread, combined

with cable hook assembly.

9

SUNSET ALUMINUM SINGLES & EXTENSION LADDERS

ASL1ASERIES SINGLE

TYPE 1A 300

• Modified “I Beam” Construction• “D” Shaped Rungs• Swivel Safety Shoes• Non-Marring End Caps

ASL1A08 8’ 15 $328.00

ASL1A10 10’ 171/ 2 375.00

ASL1A12 12’ 221/ 2 440.00

ASL1A14 14’ 28

ASL1A16 16’ 33

ASL1A18 18’ 39

ASL1A20 20’ 45

MODEL HEIGHT APPROXLIST

WEIGHT

MEETS

REQUIREMENTS

OSHA


Sale


AE200SERIES EXTENSION

TYPE II 225

AE216 13’ 26 $328.00

AE220 17’ 30 375.00

AE224 21’ 35 440.00

AE228 25’ 50

AE232 29’ 58

AE236 32’ 73

AE240 35’ 78

MODEL HEIGHTAPPROX LISTWEIGHT PRICE


Sale


• Modified “I Beam” Construction• “D” Shaped Rungs• Swivel Safety Shoes• Non-Marring End Caps• Cast Double Rung Locks• Rope & Pulley 20’ & Up

MEETS

REQUIREMENTS

OSHA

MAX WORKINGLENGTH

16’

20’

24’

28’

32’

36’

40’

SIZE

AE100SERIES EXTENSION

TYPE 1 250

AE116 13’ 26 $328.00

AE120 17’ 30 375.00

AE124 21’ 35 440.00

AE128 25’ 50

AE132 29’ 58

AE136 32’ 73

AE140 35’ 78



Sale



MEETS

REQUIREMENTS

OSHA

MAX WORKINGLENGTH

16’

20’

24’

28’

32’

36’

40’

SIZE

11

AE1ASERIES EXTENSION

TYPE 1A 300


Sale


MEETS

REQUIREMENTS

OSHA


16’

20’

24’

28’

32’

36’

40’

AE1A16 13’ 29 $328.00

AE1A20 17’ 35 375.00

AE1A24 21’ 45 440.00

AE1A28 25’ 58

AE1A32 29’ 67

AE1A36 32’ 80

AE1A40 35’ 90


MAX WORKINGLENGTH

SIZE

10

SUNSET TYPE 1-250 LB. DUTY RATED INDUSTRIAL WOOD LADDERS

W103 3’ 31/ 2” 173/ 8” 23” 14 $109.00

W104 4’ 31/ 2” 187/ 8” 29” 17 155.00

W105 5’ 31/ 2” 203/ 8” 35” 22 170.00

W106 6’ 31/ 2” 217/ 8” 41” 26 200.00

W108 8’ 31/ 2” 247/ 8” 54” 35 220.00

W110 10’ 31/ 2” 277/ 8” 66” 44 308.00

W112 12’ 31/ 2” 307/ 8” 78” 58

MODEL SIZE STEP BOTTOM APPROX APPROX LISTSIZE WIDTH SPREAD WEIGHT PRICEMEETS

REQUIREMENTS

OSHA

SUNSET

W100 SERIES


Sale


SUNSET TYPE 1A- 300 LB. DUTY RATED INDUSTRIAL WOOD LADDERS

W1A03 3’ 31/ 2” 173/ 8” 23” 17 $170.00

W1A04 4’ 31/ 2” 187/ 8” 29” 22 195.00

W1A05 5’ 31/ 2” 203/ 8” 35” 24 230.00

W1A06 6’ 31/ 2” 217/ 8” 41” 33 274.00

W1A08 8’ 31/ 2” 247/8” 54” 44 330.00

W1A10 10’ 31/ 2” 277/ 8” 66” 55 378.00

W1A12 12’ 31/ 2” 307/ 8” 78” 65

W1A14 14’ 31/ 2” 337/ 8” 90” 76

W1A16 16’ 31/ 2” 367/ 8” 102” 87


MEETS

REQUIREMENTS

OSHA

SUNSET

W1A SERIES


Sale


12 11

SUNSET 5P

SERIES

SUNSET

WX1000 SERIES


Sale


MEETS

REQUIREMENTS

OSHA

MEETS

REQUIREMENTS

OSHA

8’

10’

12’

14’

16’

WX1008 12’ 6” 65 $328.00

WX1010 15’ 6” 85 375.00

WX1012 19’ 6” 105 440.00

WX1014 22’ 6” 125

WX1016 26’ 6” 145

MODEL HEIGHTAPPROX LISTWEIGHT PRICEEXT.

MAXSTEP

SUNSET TYPE 1A-300 LB.DUTY RATED WOOD EXTENSION TRESTLE LADDERS

SUNSET TYPE 1-250 LB. DUTY RATED INDUSTRIAL WOOD LADDERS


Sale


5P-3 3’ 3” 18” 291/ 2” 16 $109.00

5P-4 4’ 3” 191/ 2” 351/ 2” 20 155.00

5P-5 5’ 3” 21” 44” 24 170.00

5P-6 6’ 3” 221/ 2” 521/ 2” 29 200.00

5P-8 8’ 3” 26” 681/ 2” 40 220.00

5P-10 10’ 3” 321/ 2” 85” 51 308.00

5P-12 12’ 3” 36” 981/ 2” 64

5P-14 14’ 3” 371/ 2” 113” 85

5P-16 16’ 3” 39” 121” 97



A C C E S S O R I E S

EXTRUDED RUBBER FEETAn extremely fine, step ladder, easilyinstalled. Non-marking. Furnished in

sets of four.

STEP LADDERSHOE KITS

SLIP-ON BOOTSHeavy all rubber non-skid shoes.

STEPLADDERSPREADER BRACES

OPTIONAL SHELF FOR FIBERGLASSAND ALUMINUM STEPLADDERS

EXTENSION AND SINGLE LADDERSWIVEL SHOES

EXTENSION SHOEReinforced neoprene. Ladder rail must

be shaped to fit. Furnished in pairs. 1" and1-1/4" width. Specify width when ordering.

ROPE & PULLEYAll aluminum 1-1/4" pulley

with 5/16" non-rotting polypropylenerope for all weather performance.

AUTOMATIC - ADJUSTING LEVELLER(FIBERGLASS & ALUMINUM LADDERS ONLY)Leveller keeps ladder stabilized in perpendicular

position on uneven terrain. Adjustable up to a9" height differential.

HEAVY DUTY SHOES 1-3/8"For single and extension ladders

HEAVY DUTY SHOES 15/16"For step ladders

STEPLADDER TOP

LADMITPrevents ladder marks. Fits

most wood and aluminum ladders.

REPLACEMENTPLASTIC FLIPPER KIT

RUNG LOCKREPLACEMENT KIT

Pairs Only

MANUAL ADJUSTING LEVELLERSManually - operated ladder levellers can be

field mounted on most types of extension ladders.Features include a safety guard and 11" adjustment.

QUICKCLICK ™STABILIZER

COMBINATION POLE GRIP& CABLE HOOK

A rigid plated "V" shaped pole grip coveredwith rubber tread, combined with

cable hook assembly.

FOLDING STEELLADDER HOOK

Bolts to ends of extension and singleladders. Folds inside ladder rails when

not in use. Approximately 6" opening. Twohooks per set. Steel, 5 lbs. pr.

13

— 250 lbs.

103011030210303

253039

250

14

SPECIFICATIONS

Model no.

10109

10110

10121

Size

15'

17'

21'

Stepladder height

8'0" T0 15'0"

9'0" TO 17'0"

11'0" T0 21'0"

Storage height

8'7"

9'7"

11'7"

Model no.

66 lbs.

79 lbs.

103 lbs.

UL LISTED OSHA/ANSI TYPE 1A ACCORDING

TO ANSI 14.2 SAFETY CODE


17

W I N G®

Little Jumbo Two-Step Little Jumbo Three-Step Little Jumbo Four-Step

Little Giant® Ultra-Lite Fiberglass Type 1A Specifications

ModelNumber

DescritptionType 1A

ExtensionHeight

StepladderHeight

ScaffoldingHeight

StorageHeight

Weight

10717 Model 17 9'-15' 4'-7' 4' 4'7" 39.lbs.10722 Model 22 11'-19' 5'-9' 5' 5'7" 47.lbs.

The Little Giant® Ultra-Lite ladder is a truly progressive ladder. The ladder isthe only ladder on the market that is made from a special resin that is non-conductive and allows the ladder to be lighter and stronger than conven-

tional fiberglass material. The Little Giant® Ultra-Lite ladder is a type 1Aladder that is rated at 300 lbs. The Ultra-Lite comes in 17-foot and 22-foot models. This ladder will cover any job from changing a light bulb to

heavy-duty commercial use. The Little Giant® Ultra-Lite ladder has aone-year warranty on workmanship and materials.

The all new solid hinge design on the LittleGiant® Ultra-lite ladder is revoluntary. The

design has evolved from five generations ofLittle Giant® hinges. The continuation ofmaterial makes it the most solid andstrongest hindge to date. This new design

makes it the safestand most technicallyadvanced hinge on anyladder in the markettoday. Patents pending

LITTLE GIANT® ULTRA-LITE LADDERS

16

5’ x 5’DOUBLE LADDER BOX

SLC55DB

5’ x 4’DOUBLE LADDER BOX

SLD548DB

5’ x 40’’DOUBLE LADDER BOX

SLC540DB

5’ x 6’8’’DOUBLE LADDER BOX

SCL568DB


Sale


– ALL FRAMES AVAILABLE IN SINGLE LADDER STYLE FOR MASONS –

SNAP-ON locking devices standard on all

SUNSET Rolling Tower scaffolding frames.

17

PLASTER SCAFFOLD END FRAMES

Description: 3’ x 6’8” Walk ThruWeight: 36 lbs.

Description: 3’ x 10’8” ApartmentWeight: 57 lbs.

Description: 3’ x 5’ Walk ThruWeight: 31 lbs.

Description: 3’ x 4’ Walk ThruWeight: 27 lbs.

Description: 3’ x 4’ LadderWeight: 24 lbs.

Description: 3’ x 40” LadderWeight: 21 lbs.

Description: 3’ x 20” LadderWeight: 17 lbs.18

SNAP-ONCROSS BRACES5 x 327 x 327 x 410 x 3210 x 4Can be manufacturedto any size Can be manufactured

to any size

Can be manufacturedto any size

SNAP-ONGUARD RAILS3’5’7’10’

GUARD RAIL POST

STRADDLE BRACES7 & 10’

GOOSERS7 & 10’10’ x 5’7’ x 5’

COUPLING PINWith 1/8’’ Collar

COUPLING PINWith 1’’ Collar

COUPLING PINNo Collar

5’’ & 8’’ CASTERSSwivel LockBrake Lock

A C C E S S O R I E SA C C E S S O R I E S

20 19

A C C E S S O R I E SA C C E S S O R I E S

’

TUBULARSIDE BRACKET20,

SIDE BRACKET20, 24, 30

SIDE BRACKET20, & 24’’

’’ 21,’’ 23,’ 24,’’

’’ ’’ ’’

’’

ROLLING TOWEROUTRIGGER

SCREW-JACKWith Base Plate12’’ & 18’’

SCREW-JACKWith Socket18’’

SWIVEL SCREW JACK SWIVEL BASE PLATE

BASE PLATE5’’ x 5’’

BASE PLATESExtension Base Plate18’’ & 24’’



HALF RUNG

MORTAR BOARD STANDS20’’ x 30’’20’’ x 30’’ Double Chain60’’ x 30’’60’’ x 30’’ Double Chain

GRAVITY LOCK PIN(Pig Tail)

TOGGLE PIN

SADDLE PIN

SPRING RETAINER

RIGHT ANGLE CLAMP SWIVEL CLAMP

22 21Distributed by: BEST MATERIALS LLC Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email: [email protected]

TRUSSES8’ & 12’ Straight Trusses16’ & 22’ Trusses with BellyTrusses can be manufacturedto your specifications

FOLDING TRESTLES2’, 3’, 4’ & 6’Folding TrestleExtensions2’ & 3’

ACCESS LADDERSTARTER BRACKET

ACCESS LADDER


22


JIFFY-JACK

DRYWALL CART

FLAT BACKSFlat Back: 8’’ or 10’’ widthHeight: 12, 16, 18, 20, 22, 24, 30, and 36’’

’’ ’’ ’’ ’’’’ ’’ ’’

RAZORBACKS12, 18, 20, 24, 30’’ & 36’’’’ ’’ ’’ ’’

23


Sale



Plywood and Aluminum decks for steel scaffolds availablefor construction or general maintenance work. May be used

end to end in continuous lengths or as single units.

Heavy duty Hook Reinforcementplates help withstandabusive loads

Hook Lock Clamp...Fits easily in place, makes erection easier. Offsets hooksallow in-line installation.

NAIL LOCKThe plywood deck is notchedin the center for easy installationaround vertical post.

Heavy duty 1/2"exterior gradeplywood deckfastened with special rivets.Deck is easilyreplaced.

Model

AP7507

AP7508

AP7510

Width

19”

19”

19”

RailSize

4”

4”

4”

Approx.Wt. Lbs.

25

28

35

Length

7 ft.

8 ft.

10 ft.

Duty RatingLbs.

per sq.ft.

75

50

50

MODEL AP 7500 SERIES


Sale



Sale


All Aluminum decks for steel scaffolds are available forconstruction or general maintenance work. May be used

end to end in continuous lengths or as single units.

Model

AA7507

AA7508

AA7510

Width

19-1/16”

19-1/16”

19-1/16”

RailSize

2”

2”

2”

Approx.Wt. Lbs.

31

35

40

Length

7 ft.

8 ft.

10 ft.

Duty RatingLbs.

per sq.ft.

75

50

50

MODEL AA 7500 SERIES


Sale

s and Service Second to None!LADDER CO.

Since 1929Sa

le


24

A. PROVIDE ADEQUATE SILLS for scaffold post and use base plates.

B. USE ADJUSTING SCREWS instead of blocking to adjust touneven grade conditions.

C. PLUMB AND LEVEL ALL SCAFFOLDS as the erectionproceeds. Do not force braces to fit - level the scaffolduntil proper fit can be made easily.

D. FASTEN ALL BRACES SECURELY.E. DO NOT CLIMB CROSS BRACES. An access(climbing)

ladder, access steps, frame designed to be climbedor equivalent safe access to the scaffold shall be used.

F. ON WALL SCAFFOLDS PLACE AND MAINTAIN ANCHORSsecurely between structure and scaffold at least every 30' of length and 25' of height.

G. WHEN SCAFFOLDS ARE TO BE PARTIALLY OR FULLYENCLOSED, specific precautions must be taken to assure frequency and adequacy of ties attaching the scaffoldingto the building due to increased load conditions resulting

from effects of wind and weather. The scaffoldingcomponents to which the ties are attached must also bechecked for additional loads.

H. FREE STANDING SCAFFOLD TOWERS MUST BERE-STRAINED FROM TIPPING by guying or other means.

I. EQUIP ALL PLANKED OR STAGED AREAS with properguardrails, midrails and toeboards along all open sides and ends of scaffold platforms.

J. POWER LINES NEAR SCAFFOLDS are dangerous - use caution and consult the power service company foradvice.

K. DO NOT USE ladders or makeshift devices on top ofscaffolds to increase the height.

L. DO NOT OVERLOAD SCAFFOLDS.M. PLANKING:

1. Use only lumber that is properly inspected and gradedas scaffold plank.

2. Planking shall have at least 12" of overlap and extend 6" beyond center of support, or be cleated at both ends toprevent sliding of supports.

3. Fabricated scaffold planks and platforms unless cleated or restrained by hooks shall extend over their endsupports not less then 6" nor more than 12".

4. Secure plank to scaffold when necessary.

N. FOR ROLLING SCAFFOLD THE FOLLOWING ADDITIONALRULES APPLY:1. DO NOT RIDE ROLLING SCAFFOLDS.2. SECURE OR REMOVE ALL MATERIAL AND EQUIPMENT

from platform before moving scaffold.3. CASTER BRAKES MUST BE APPLIED at all times when

scaffolds are not being moved.4. CASTERS WITH PLAIN STEMS shall be attached to the

panel or adjustment screw by pins or other suitable means.

5. DO NOT ATTEMPT TO MOVE A ROLLING SCAFFOLD WITHOUT SUFFICIENT HELP – watch out for holes infloor and overhead obstructions.

6. DO NOT EXTEND ADJUSTING SCREWS ON ROLLINGSCAFFOLDS MORE THAN 12".

7. USE HORIZONTAL DIAGONAL BRACING near thebottom and at 20' intervals measured from rollingsurface.

8. DO NOT USE BRACKETS ON ROLLING SCAFFOLDSwithout consideration of overturning effect.

9. THE WORKING PLATFORM HEIGHT OF A ROLLINGSCAFFOLD must not exceed four times the smallest basedimension unless guyed or otherwise stabilized.

O. For "PUTLOGS" and "TRUSSES" the following additionalrules apply:1. DO NOT CANTILEVER OR EXTEND PUTLOGS /TRUSSES

as side brackets without thorough consideration forloads to be applied.

2. PUTLOGS/TRUSSES SHOULD EXTEND AT LEAST 6"beyond point of support.

3. PLACE PROPER BRACING BETWEEN PUTLOGS/TRUSSESwhen the span of putlog/truss is more than 12".

P. ALL BRACKETS shall be seated correctly with sidebrackets parallel to the frames and end brackets at 90degrees to the frames. Brackets (except mobile brackets designed to carry materials) are to be used as workplatforms only and shall not be used for storage ofmaterial or equipment.

Q. ALL SCAFFOLDING ACCESSORIES shall be used andinstalled in accordance with the manufacturersrecommended procedure. Accessories shall not bealtered in the field. Scaffolds, frames and their components,manufactured by different companies shall not be intermixed.

SCAFFOLDING SAFETY RULESAs Recommended by

SCAFFOLDING AND SHORING INSTITUTE(See Separate Shoring Safety Rules)

Following are some common sense rules designed to promote safety in the use of steel scaffolding. These rules are illustrative and sug-gestive only, and are intended to deal only with some of many practices and conditions encountered in the use of scaffolding. The rulesdo not purport to be all-inclusive or to supplant or replace other additional safety and precautionary measures to cover usual or unusualconditions. They are not intended to conflict with, or supersede, any state, local, or federal statute or regulation; reference to such spe-cific provisions should be made by the user. (See Rule II.)

I. POST THESE SCAFFOLDING SAFETY RULES in a conspicuous place and be sure that all persons who erect, dismantle or use scaffolding are aware of them.II. FOLLOW ALL STATE, LOCAL AND FEDERAL CODES, ORDINANCES AND REGULATIONS pertaining to scaffolding.

III. INSPECT ALL EQUIPMENT BEFORE USING – Never use any equipment that is damaged or deteriorated in any way.IV. KEEP ALL EQUIPMENT IN GOOD REPAIR.V. INSPECT ERECTED SCAFFOLDS REGULARLY to be sure that they are maintained in safe condition.

VI. CONSULT YOUR SCAFFOLDING SUPPLIER WHEN IN DOUBT – scaffolding is his business. NEVER TAKE CHANCES.

25

26

27

28

29

30

31

32

33

34

35


37

MODEL UTILITY SCAFFOLD WT.

SLCUT06 29" X 6' UTILITY SCAFFOLD COMPLETE 152

SLCUT06G 29" X 6' UTILITY SCAFF. COMP. W/GUARD RAIL 285

SLCUT06D 29" X 12' UTILITY SCAFF. COMP. W/G.R. & OUTRIGGERS 376

SLCUT12C 29" X 6' UTILITY SCAFFOLD COMPLETE 528



MODEL INDIVIDUAL COMPONENT PARTS LIST WT.

SLC72FR 72" TALL UTILITY ADD-ON FRAME 28

SLC42FR 39" TALL UTILITY ADD-ON FRAME 18

SLC6TR 6" UTILITY SCAFFOLD ARM BRACE 21

SLCUTGR 6' UTILITY SCAFFOLD G. RAIL KIT 65

SLCUTWOR WIDE UTILITY OUTRIGGER 25

SLCUTNOR NARROW UTILITY OUTRIGGER 14

SLC5 5" UTILITY SCAFFOLD CASTER 2.5

SLCPLT 6' UTILITY SCAFFOLD PLATFORM 27

SUNSET UTILITY SCAFFOLD


Sale


SLCUT06 SLCUT06D

38

MODEL BI-FOLD MINI SCAFFOLDS WT.

SLCMF4 4' TALL BI-FOLD SCAFFOLD W/2-PLANKS AND WORK TRAY 60

SLCMF6 6' TALL BI-FOLD SCAFFOLD W/3 PLANKS 105

SUNSET UTILITY SCAFFOLD

39

40

41

SUNSET - ALUMINIUM PLANKS & STAGES

ALUMINIM PLANKS, STAGES & MODULAR HANDRAIL/TOEBOARD SYSTEM

Sunset scaffold Planks and Stage Platforms are used with and without modulas toeboard and handrail systems or in conjunction with extension ladders and ladder jacks.Stage platforms have multiple applications as swing stages, bridges and catwalks.

Important Design Fratures Make Sunset Aluminum Planks and Stage SystemsMore Durable, Flexible and Productive for Reaching Work

Modular Safety Handrail & Toeboard System is easy to install.

Raised Tread & OpenPattern deck Designprovides slip-resistantsurface that reducesbuildup of solids andliquids.

Interlocking handlespermit continuous end-

to-end positioning foreasier and extendedaccess.

Rail Ends handles - FullWidth End Rung Gripsprovide for easy liftingand carrying.

Rigid I-Beams SideRails provide beststrength, weight andcost relationship.

Round Rung CrossBraces on top andbottom

Handles & IndividualDeck Strips designed foreasy replacement.

Style Load Capacity*

*Load Capacity includes the weight of the person and his tools.

1-Man System

2-Man System

3-Man System

Widths

12", 14", 20"

12", 14", 20", 24",28"

20", 24",28"

Length

8 ft. - 24 ft.

8 ft. - 32 ft.

8 ft. - 32 ft.

250 Lbs.

500 Lbs.

750 Lbs.


Sale


42

43

44


Sale


Traction Tread (Standard Step)Designed and manufactured toprovide the optimum in safety,strength and appearance. Providesgreater non-slip protection thandiamond plate.

Diamond Plate (Optional Step)Provides anti-slip protectionthrough use of raised diamondshaped ribs on a fully closed stepsurface.

Safety Grating (Optional Step)Provides maximum non-skid protec-tion in wet and/or dry conditions.


46

47

48




Sale


51

NightHawkTM Roofer's Kit

NightHawkTM Roofer’s Kit contains NightHawkTM Harness, 50’ Hawkline Lifeline with Rope Grab and 2' ZORBER Shock-absorbing

lanyard, single use anchor with fasteners, packaged in a five- gallon bucket. Available Sizes: One Size Fits Most

Part Number 05003

Group A

Two D-ring TowerMate Harness Sliding D-ring at center of back, Chest-high front D-ring.

Available Sizes: S-L, L-XL Part Numbers: 56222 & 56224

TowerMate LE Harness

Group A Group L

One D-ring ConstructionPlusTM Harness Sliding D-ring at center of back, Parachute-mating buckles on leg straps, Made of polyester.

Available Sizes: One Size Part Number: 48103 (01809)

All Universal Series Full Body Harnesses include these Standard features and benefits:

Features Benefits1. Sliding back D-ring 2. Full-strength chest strap 3. Seat strap 4. One size fits most workers

Allows 100% tie off ground to ground Increases reliability and safety Provides maximum support Reduces inventory requirements

CSA Classifications

Full body harnesses shall be classified as follows:

Fall ArrestingGroup A

Controlled DescentGroup D

Ladder ClimblingGroup L

Worker PositioningGroup P

Confined Entry & ExitGroup E

ELK RIVER LANYARDS, BELTS, & HARNESSES

13102 13102ZORBER Shock-absorbing 1/2" x 6' Rope Lanyard

27126

17150 Corobiner Required.

5/8" x 6' Nylon Rope 34406

(See Price List for Other Lengths.)

13102 131021" x 6' CP+ NoPacTM Shock-

absorbing Web Lanyard, Polyester 27826

All CP+ Lanyards come in 3', 4', 5', and 6' Lenghts.

1" x 6" CP+ NoPacTM Shock- absorbing Web Lanyard, Polyester

27806

Loop13102

1" x 6" CP+ NopacTM Shock 3/8" absorbing Twin-leg Web Lanyard,

Polyester 27836

13102 2- 13102

Dual Size (5/8" & 3/4") Rope Grab

19250

3/8" Wire Rope Grab (17150) Carabiner Required)

19400

52

ConstructionPlus TM Harness

Lanyards

Group A


Sale


53


Sale


54

1SPEVDU $BUBMPH - Best Materials · Concerning OSHA Requirements ... Fixed Ladders (1910.27) and ladders used in Construction Industry (1926.1053). ... OSHA LADDER CO.!

Documents