Following steps are instructions on Window 7 (64bit) machine. If you already installed LiveSuit application and driver correctly, you may skip to step 3. 1.Install LiveSuit application ***Important This step will also install necessary driver to system. You are advice to click “Install Driver” when OS prompt for confirmation. 2.Restart Computer After successfully unpacked LiveSuit software and drivers, restart computer. 3. Launch LiveSuit application Launch LiveSuit.exe with administrator privilege. You should not see any error related to driver installation.
6
Embed
1.Install LiveSuit application - Amazon S3 · 4. Select Firmware On LiveSuit interface, click “Select Firmware” button and choose downloaded firmware for InkCase.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Following steps are instructions on Window 7 (64bit) machine. If you already installed LiveSuitapplication and driver correctly, you may skip to step 3.
1.Install LiveSuit application
***Important This step will also install necessary driver to system. You are advice to click“Install Driver” when OS prompt for confirmation.
2.Restart ComputerAfter successfully unpacked LiveSuit software and drivers, restart computer.
3. Launch LiveSuit applicationLaunch LiveSuit.exe with administrator privilege. You should not see any error related to driverinstallation.
5.Go to InkCase recovery modeFirstly, disconnect and turn off InkCase.After InkCase is turned off, follow diagram below step by step to go into recovery mode.
If you have correctly connected InkCase Recover mode to PC, you should be able to see thisscreen on your PC.
6. Confirm update on LiveSuit application
Wait for it to complete.
7. Done
Now you can disconnect from PC and enjoy new firmware.