1d3d.ppt - TBM/Scher 1 nChristof Schernus, Thorsten Märtens, Werner Willems, FEV Motorentechnik GmbH & Co. KG Martin Hopp, Lehrstuhl für Verbrennungskraftmaschinen, RWTH Aachen Heijo Oehlschlegel, FEV engine technology, Inc. Presentation at the GT-Suite User Conferences nNovember 2, 1998 Wings Hotel, Raunheim, Germany nNovember 16, 1998 Hilton Northfield, Troy, MI, U.S.A. 1D/3D Computational Analysis of a V6 S.I. Variable Intake Manifold
18
Embed
1D/3D Computational Analysis of a V6 S.I. Variable … - TBM/Scher 3 1D/3D Computational Analysis of a V6 Variable Intake Manifold n Introduction n 1D-3D Modeling Strategy n Base Engine
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1d3d.ppt - TBM/Scher 1
nChristof Schernus, Thorsten Märtens, Werner Willems, FEV Motorentechnik GmbH & Co. KGMartin Hopp,Lehrstuhl für Verbrennungskraftmaschinen, RWTH AachenHeijo Oehlschlegel, FEV engine technology, Inc.
1D/3D Computational Analysis of a V6 Variable Intake Manifold
800 1600 2400 3200 4000 4800 5600 64000.7
0.8
0.9
1.0
1.1
Engine Speed [rpm]
Volu
met
ric E
fficie
ncy
Measured PredictedComponent Intake System
1d3d.ppt - TBM/Scher 10
1D/3D Computational Analysis of a V6 Variable Intake Manifold
1D/3D Simulation and Results
1d3d.ppt - TBM/Scher 11
1D/3D Computational Analysis of a V6 Variable Intake Manifold
1D/3D Simulation and Results
1d3d.ppt - TBM/Scher 12
Velocity in Intake Manifold at 2800 rpm
1d3d.ppt - TBM/Scher 13
Velocity in Intake Manifold at 2800 rpm
1d3d.ppt - TBM/Scher 14
Pressure in Intake Manifold Cylinder 6 at 6000 rpm
1d3d.ppt - TBM/Scher 15
Velocity in Intake Manifold Cylinder 6 at 6000 rpm
1d3d.ppt - TBM/Scher 16
1D/3D Computational Analysis of a V6 Variable Intake Manifold
1D/3D Simulation and Results
-120 0 120 240 360 480 600 720
1.0
1.5
2.0
2.5Exhaust Cyl. 6 1D+3D
pure 1D
Crank Angle [° ATDC Cyl. 1]
0
2
4
6
8
Cylinder 6
2800 rpm
Pres
sure
[bar
]
0.8
1.0
1.2
1.4
Intake Runner Cyl. 6
-120 0 120 240 360 480 600 720
1.0
1.5
2.0
2.5
3.0Exhaust Cyl. 6 1D + 3D
pure 1D
Crank Angle [° ATDC Cyl. 1]
0
2
4
6
8
Cylinder 6
6000 rpm
Pres
sure
[bar
]
0.8
1.0
1.2
1.4
Intake Runner Cyl. 6
1d3d.ppt - TBM/Scher 17
1D/3D Computational Analysis of a V6 Variable Intake Manifold
Optimization Results
1000 2000 3000 4000 5000 6000 700050
60
70
80
90
100
Base Optimized
Torq
ue [N
m/l]
Engine Speed [rpm]
1000 2000 3000 4000 5000 6000 70000
10
20
30
40
50
60
Pow
er [k
W/l]
1d3d.ppt - TBM/Scher 18
1D/3D Computational Analysis of a V6 Variable Intake Manifold
n The 1D-3D link of STAR-CD and GT-Power is a useful tool to investigate details of dynamic flow in a subdomain of the intake or exhaust manifoldl The pressure oscillation behavior of all gas columns outside the
3D domain is considered by the 1D model
l Impact of design modifications can be evaluated immediately regarding engine fuel economy, and/or performance
l 3D CFD can be used to calibrate a pure 1D model, that is required to investigate the engine performance in a larger number of operating points.
n 1D-3D analysis results in deeper understanding of complex flow phenomena. Therefor, the application of this method can increase the efficiency of the development process, if cost-benefit ratio is considered carefully.