1999-2000 Suzuki GSX1300R - Power Commander 1999-2000 Suzuki GSX1300R - PCIII USB - 1 1999-2000 Suzuki GSX1300R Installation Instructions Dynojet Research 2191 Mendenhall Drive North

i304-411 1999-2000 Suzuki GSX1300R - PCIII USB - 1

1999-2000 Suzuki GSX1300RInstallation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com

Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab

You can also download the PowerCommander software and latest mapsfrom our web site at:

www.powercommander.com

The ignition MUST be turnedOFF before installation!

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

USB PortExpansion Port

1 Remove the main seat and thepassenger seat.

2 Hold the front of the fuel tankup using the prop rod located in the trunk area.

3 Locate the connector from themain wiring harness to the injector rail and uplug this con-nector (Fig. A).

NOTE: This connector is black incolor and may be covered by arubber boot.

4 Plug the connectors from thePCIII in-line of the stock wiring harness (Fig. B).

5 Route the PCIII wiring along theinside of the frame towards thebattery.

6 Attach the ground wire from thePCIII to the negative side of thebattery (Fig. C).

Fig.

AFi

g. B

Fig.

C

1999-2000 Suzuki GSX1300R - PCIII USB - 2i304-411 www.powercommander.com

Unplug this connector

Stock connectors

Ground wire from PCIII

PCIII connectors

7 Install the PCIII in the rearsection of the trunk using thesupplied velcro (Fig. D). Makesure to clean both surfaces withalcohol first.

Fig.

D

1999-2000 Suzuki GSX1300R - PCIII USB - 3i304-411 www.powercommander.com