This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1012 Mopac Circle · Suite 200 · Austin, Texas 78746 · (512) 328-1883 (FAX) 328-7448 · www.ppds-inc.comA Division of ACI Group, LLC
AmaraApartments
SPECIFICATIONS
09/15/16
San Antonio, TX 78257
Pricing Set (Not For Construction)
1927 Talavera Ridge
CLUBHOUSE
[ CLUBHOUSE ]
SPECIFICATION BOOK TABLE OF CONTENTS
1. GENERAL FINISH NOTES 2. FLOORING FINISHES 3. BASE & TRIM FINISHES 4. PAINT & WALL FINISHES 5. MILLWORK FINISHES 6. DECORATIVE LIGHT FIXTURES 7. PLUMBING FIXTURES 8. DOOR STYLE & HARDWARE 9. MISCELLANEOUS
[ CLUBHOUSE ]
GENERAL FINISH NOTES
1. Contractor to provide all specified finish material submittals to Interior
Designer for approval prior to ordering. Any suggested alternate finishes to be submitted to Interior Designer for approval.
2. All paint & stain samples to be sampled at jobsite for Interior Designer
approval prior to painting full project. 3. Paint quality & application / preparation methods included. 4. Alternates will not be accepted on specified materials without the approval
of the Interior Designer. 5. All finish specifications and finish materials must be cross-checked and
verified by subcontractors prior to ordering. Any discrepancies require notification to the Interior Designer and the General Contractor prior to installation of materials.
6. "unless noted otherwise" will be abbreviated as "u.n.o." within this
specification manual. 7. Coordinate location of pendant light fixtures on site with Interior Designer
prior to installation. 8. Refer to manufacturer’s recommended installation methods for all finish
materials included in this package. 9. Re-use of enclosed specifications and corresponding documents for
purposes other than the above referenced project are forbidden without written permission of PPDS.
Description: Custom Hand-Knotted RugManufacturer: Aqua HospitalityStyle Number: AY01099Colorway: Color 1Colors: L13, I43, B11, I40, C10, I44,
A18, I37Texture: BlendPattern Repeat: 72" x 144"Thickness: Custom (10mm)Fiber: New Zeland WoolInstallation: Broadloom
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Aqua HospitalityAddress: 201 Princeton Boulevard
Adairsville, GA 30103Website: www.aquahospitalitycarpets.com
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Mohawk ContractAddress: 160 South Industrial Blvd
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Mohawk ContractAddress: 160 South Industrial Blvd
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Mohawk ContractAddress: 160 South Industrial Blvd
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: PatcraftAddress: PO Box 2128
Notes:**Refer to Interior Finish Plans for locations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Athletic TextilesAddress: 5700 Granite Parkway, Suite 200
Plano, TX 75024Website: www.syntheticturf.com
Contact: Matt GarrabrantsPhone: 877-401-2298 Email: [email protected]
Description: Glazed Porcelain TileManufacturer: Stone SolutionsStyle: AmayaColor: BlendSize: 6" x 36"Thickness: 3/8"Installation: Brick AshlarGrout: Custom Building Products
#183 Chateau
Notes:**Refer to Interior Finish Plans for location and installation direction**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Stone SolutionsAddress: 2222 W. Rundberg, Suite 450
Location: Corridor 1, Corridor 2Corridor 3 at Elevator
Description: Porcelain Tile (Accent) Manufacturer: Concept SurfacesStyle: BijouColor: Fumo Di Londra Style Number: FW06Size: 6" x 24"Finish: GlossyThickness: 2/5" (10mm)Installation: Pattern #1: Herringbone
Pattern #2: Half LapGrout: Custom Building Products
#09 Natural Gray
Notes:**Refer to Interior Finish Plans for location and installation patterns**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Porcelain Tile (Field)Manufacturer: Concept SurfacesStyle: BijouColor: Fumo Di Londra Style Number: FW06Size: 24" x 24"Finish: NaturalThickness: 2/5" (10mm)Installation: Half LapGrout: Custom Building Products
#540 Truffle
Notes:**Refer to Interior Finish Plans for location and installation patterns**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Porcelain TileManufacturer: Concept SurfacesStyle: BijouColor: Fumo Di Londra Style Number: FW06Size: 6" x 24"Finish: NaturalThickness: 2/5" (10mm)Installation: HerringboneGrout: Custom Building Products
#540 Truffle
Notes:**Refer to Interior Finish Plans for location and installation patterns**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimilar floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Porcelain Tile (Border)Manufacturer: Concept SurfacesStyle: BijouColor: Fumo Di Londra Style Number: FW06Size: 12" x 24"Finish: NaturalThickness: 2/5" (10mm)Installation: Straight Grout: Custom Building Products
#540 Truffle
Notes:**Refer to Interior Finish Plans for location and installation patterns**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimilar floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Cement TileManufacturer: LiLi Cement Tile Inc. Style: LorelyStyle Number: SH050-8Colors: 1001, 2013, 2014, 3019Size: 8" x 8"Thickness: 5/8"Grout: Custom Building Products
#541 WalnutInstallation: Straight lay; use 4 tiles to create
pattern
Note: Refer to ALL manufacturer recommended installation instructions & materials for this product
Note: Tile to be sealed with manufacturerrecommended Dry Treat Stain-Proof sealant
Notes:**Refer to Interior Finish Plans for location and installation direction**Grout joint to be 1/16" maximum**Seal all grout joints**Flooring transition strips between dissimilar floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slopeContact InformationRecommended Vendor: Travis Tile Address: 2515 Willowbrook Rd., Suite 103
Description: Glazed Ceramic Tile (Field)Manufacturer: Interceramic TileStyle: BuranoColor: Sabbia MezzoSize: 12" x 24"Finish: MatteThickness: 3/8"Installation: Straight Lay (See Pattern)Grout: Custom Building Products
#145 Light Smoke
Notes:**Refer to Interior Finish Plans for location and installation direction**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Glazed Ceramic Tile (Accent)Manufacturer: Interceramic TileStyle: BuranoColor: Sabbia MezzoSize: 16" x 16"Finish: MatteThickness: 3/8"Installation: Straight Lay (See Pattern)Grout: Custom Building Products
#145 Light Smoke
Notes:**Refer to Interior Finish Plans for location and installation direction**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimilar floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Notes:**Refer to Interior Finish Plans for location and installation direction**Grout joint to be 1/8" maximum**Seal all grout joints**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Vinyl Plank Manufacturer: FloorfolioCollection: TimberColor / Number: 636-676Size: 6" x 36"Overall Thickness: 3mmWear Layer: 8 milInstallation: Direct Glue
Notes:**Refer to Interior Finish Plans for location**Install per manufacturer's recommendations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Vinyl Plank Manufacturer: FloorfolioCollection: EnviroQuietColor / Number: 636-425-RBSize: 6" x 36"Overall Thickness: 5mmWear Layer: 22 milInstallation: Direct Glue
Notes:**Refer to Interior Finish Plans for location**Install per manufacturer's recommendations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Description: Engineered Wood FlooringManufacturer: Kentwood OriginalsCollection: Antiqued Species: American WalnutStyle: Sculpted Walnut NaturalSKU: 31452Size: 5.5" x 47"Thickness: 1/2"Finish: High Performance Polyurethane
Notes:**Refer to Interior Finish Plans for location**Install per manufacturer's recommendations**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Contact InformationRecommended Vendor: Metropolitan Hardwood Floors Inc.Address: 9330 United Drive Suite 4-160
Description: Rubber Floor TileManufacturer: Atmosphere by To MarketCollection: StructureColor/Number: TM-RW 1904 Elemental GrayType: Straight EdgeSize: 38” x 38”Thickness: .315" (8mm)
Notes:**Refer to Interior Finish Plans for location**To be installed per manufacturer's instructions**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transitionstrip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If Exceeding max1/2" H it must then have a 1:12 or shallower slope
Location: Tile to Carpet (EXCEPT @ CPT-1),Tile to Rubber Floor,Tile to Vinyl Plank
Description: Metal Transition StripManufacturer: SchluterStyle: RENO-TKStyle #: ATK100ATFinish: Satin Nickel Anodized Aluminum (AT)Height: 10mm / 3/8"Installation: Refer to Manufacturer Instructions
Notes:**Flooring installer to verify Schluter Transition Strip model number per flooring material height.**Refer to Interior Finish Plans for location**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transition strip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If exceeding max 1/2" H it must then have a 1:12 or shallower slope
Description: Metal Transition StripManufacturer: SchluterStyle: SchieneStyle #: AE100Finish: Satin Anodized Aluminum (AE)Height: 10mm / 3/8"Installation: Refer to Manufacturer Instructions
Notes:**Flooring installer to verify Schluter Transition Strip model number per flooring material height.**Refer to Interior Finish Plans for location**Flooring transition strips between dissimular floor finish materials must not to exceed max. 1/4"H, if transition strip exceeds 1/4"H, it must not exceed 1/2"H with top 1/4" having a 1:2 or shallower bevel. If exceeding max 1/2" H it must then have a 1:12 or shallower slope
Description: Painted Wood TrimManufacturer: Ameritech MillworksProfile: Square EdgeSize: 1" x 4"Species: FJ PinePainted: PT-2 Sherwin Williams
Agreeable Gray SW 7029Sheen: Semi-Gloss
Notes:**Contractor may provide "or equal" profile for above specification.**Refer to Interior Elevations for more information.**Any standard framed window openings are to receive wood jambs, finished to match above trim.
Contact InformationRecommended Vendor: Ameritech MillworksAddress: 2300 West Marshall Drive
Grand Prairie, Texas 75051Website: www.amillworks.com
Contact: John GilliamPhone: 817-825-1866 cellEmail: [email protected]
Description: Ceramic Wall TileManufacturer: Ann SacksSeries: Modern RibbedDesign: Ribbed Criss CrossColor: G2010 New LagoonGlaze: SW Gloss ColorsSize: 3" x 9"Thickness: 0.75"Installation: See Elevation for Pattern
and QuantityGrout: Custom Building Products
#59 Saddle Brown
Notes:**Refer to Interior Finish Plan and Elevations for more information**Use manufacturer's recommended adhesive and color.
Contact InformationRecommended Vendor: Ann SacksAddress: 1011 W. 5th Street, Suite 115
Description: Ceramic Wall TileManufacturer: Ann SacksSeries: Modern RibbedDesign: Ribbed Field TileColor: G2010 New LagoonGlaze: SW Gloss ColorsSize: 3" x 9"Thickness: 0.75"Installation: See Elevation for Pattern
and QuantityGrout: Custom Building Products
#59 Saddle Brown
Notes:**Refer to Interior Finish Plan and Elevations for more information**To be installed per manufacturer's recommendations
Contact InformationRecommended Vendor: Ann SacksAddress: 1011 W. 5th Street, Suite 115
Description: Ceramic Wall TileManufacturer: Ann SacksSeries: Modern RibbedDesign: Field TileColor: G2010 New LagoonGlaze: SW Gloss ColorsSize: 3" x 9"Thickness: 0.75"Installation: See Elevation for Pattern
and QuantityGrout: Custom Building Products
#59 Saddle Brown
Notes:**Refer to Interior Finish Plan and Elevations for more information**To be installed per manufacturer's recommendations
Contact InformationRecommended Vendor: Ann SacksAddress: 1011 W. 5th Street, Suite 115
Description: Ceramic Wall TileManufacturer: Ann SacksSeries: Modern RibbedDesign: Ribbed Split Right Field TileColor: G2010 New LagoonGlaze: SW Gloss ColorsSize: 3" x 9"Thickness: 0.75"Installation: See Elevation for Pattern
and QuantityGrout: Custom Building Products
#59 Saddle Brown
Notes:**Refer to Interior Finish Plan and Elevations for more information**To be installed per manufacturer's recommendations
Contact InformationRecommended Vendor: Ann SacksAddress: 1011 W. 5th Street, Suite 115
Description: Ceramic Wall TileManufacturer: Ann SacksSeries: Modern RibbedDesign: Ribbed Split Left Field TileColor: G2010 New LagoonGlaze: SW Gloss ColorsSize: 3" x 9"Thickness: 0.75"Installation: Ribbed Split Right/ Left 2
Design #7Grout: Custom Building Products
#59 Saddle Brown
Notes:**Refer to Interior Finish Plan and Elevations for more information**To be installed per manufacturer's recommendations
Contact InformationRecommended Vendor: Ann SacksAddress: 1011 W. 5th Street, Suite 115
Description: Field TileManufacturer: 41Zero42Collection: MateColor: Terra AvorioSize: 12" x 24"Thickness: 9.5mmFinish: NaturalInstallation: Straight LayGrout: Laticrete
#42 Platinum
Notes:**Refer to Interior Finish Plan and Elevations for more information**Seal all grout joints
Contact InformationRecommended Vendor: Stone SourceAddress:
Description: Field TileManufacturer: Ceramiche SupergresSeries: Ever & StoneColor: EverclaireSize: 24" x 24"Thickness: 9.5mmInstall Pattern: See Elevation for Pattern DetailsGrout: Custom Building Products
#183 Chateau
Notes:**Refer to Interior Finish Plan and Elevations for more information**Seal all grout joints**All Grout Joints to be 1/8"
Description: Field TileManufacturer: Ceramiche SupergresSeries: Ever & StoneColor: EverclaireSize: 12" x 24"Thickness: 9.5mmInstall Pattern: See Elevation for Pattern DetailsGrout: Custom Building Products
#183 Chateau
Notes:**Refer to Interior Finish Plan and Elevations for more information**Seal all grout joints**All Grout Joints to be 1/8"
Description: Accent TileManufacturer: DaltileSeries: Metal FusionColor: Stainless Steel P450Size: 8" x 24"Thickness: 3/8"Install Pattern: See Elevation for Pattern DetailsGrout: Custom Building Products
#183 Chateau
Notes:**Refer to Interior Finish Plan and Elevations for more information**Seal all grout joints**All Grout Joints to be 1/8"
Contact InformationRecommended Vendor: DaltileAddress: 219 Commercial Dr.
Description: Field TileManufacturer: Dal TileSeries: Graphic EffectsColor: Deep Pigment GE06Size: 12" x 24"Thickness: 3/8"Install Pattern: Straight layGrout: Laticrete
#22 Midnight Black
Notes:**Refer to Interior Finish Plan and Elevations for more information**Seal all grout joints**All Grout Joints to be 1/8"
Description: Aluminum Divider Screen Manufacturer: ParasoleilSize: 4' x 8'Pattern: Continental Flower Material: Aluminum Color: Deep SmokeFinish: Patina Powder coat Color: Deep Smoke
Notes:**Refer to Interior Finish Plans and Elevations for more information **GC to submit millwork shop drawings and stain sample to Interior Designer for approval
Contact InformationRecommended Vendor: ParasoleilAddress: 6510 W. 91st Avenue, Suite 100
Note: At waterfall sides, both facesof stone to be polished
Notes:**Refer to Interior Elevations for finish locations**No rounded edges or corners**LONG LEAD TIME: Slabs to be ordered well in advance to avoid lead time issues
Note: At waterfall sides, both facesof stone to be polished
Notes:**Refer to Interior Elevations for finish locations**No rounded edges or corners**LONG LEAD TIME: Slabs to be ordered well in advance to avoid lead time issues
Notes:**Refer to Interior Elevations for finish locations**No rounded edges or corners**LONG LEAD TIME: Slabs to be ordered well in advance to avoid lead time issues
Contact InformationRecommended Vendor: The Kip Co.Address: 7155 Old Katy Road, Suite S 104
Notes:**Refer to Interior Elevations for finish locations**No rounded edges or corners**LONG LEAD TIME: Slabs to be ordered well in advance to avoid lead time issues
Contact InformationRecommended Vendor: The Kip Co.Address: 7155 Old Katy Road, Suite S 104
Description: ChandelierManufacturer: Troy LightingStyle/Number: Epic F5325Size: 18" W X 25.25" H (small)Finish: Forged Iron/ Plated TopazLamp: (4) 40W G9
40 Watts per Light (160 total)
Notes:**Mounting Height to be 12'-3" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Troy LightingAddress: 14508 Nelson Ave.
Description: ChandelierManufacturer: Troy LightingStyle/Number: Epic F5326Size: 24" W X 33.75" H (medium)Finish: Forged Iron/ Plated TopazLamp: (6) 40W G9
40 Watts per Light (240 total)
Notes:**Mounting Height to be 13'-1" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Troy LightingAddress: 14508 Nelson Ave.
Description: ChandelierManufacturer: Troy LightingStyle/Number: Epic F5327Size: 30" W X 42" H (large)Finish: Forged Iron/ Plated TopazLamp: (8) 40W G9
40 Watts per Light (320 total)
Notes:**Mounting Height to be 9'-8" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Troy LightingAddress: 14508 Nelson Ave.
Notes:**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Sapphire ChandelierAddress: 174 E. Liberty Ave.
Anaheim, CA 92801Website: www.sapphirechandelier.com
Contact: Brian StephensonPhone: (855) 879-3660Email: [email protected]
Description: ChandelierManufacturer: ArteriorsStyle Name:: Prescott PendantStyle/Number: 86801Size: 22"Dia. x 14.5"HFinish: Gold LeafLamp: (3) Type A- E26 KeylessSocket Wattage: 100
Notes:**Mounting Height to be 7'-6" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Wall SconceManufacturer: ArteriorsStyle Name:: Stillman SconceStyle/Number: 42301Size: 19.5"H x 7"W x 5"DFinish: Antique Brass/ Frosted
GlassLamp: (2) Type A- E26 Socket Wattage: 25
Notes:**Mounting height to be 6'-0" AFF to center of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: ChandelierManufacturer: Troy LighitngStyle/Number: Ace F5303Size: 27.75" W x 6.5" H Finish: Forged Iron/ Plated TopazLamp: (6) 40W G9 included
40 Watts per Light (240 total)
Notes:**Mounting Height to be 7'-6" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Troy LightingAddress: 14508 Nelson Ave.
Description: ChandelierManufacturer: Hubbardton ForgeStyle Name: Double Cirque Large Scale
ChandelierStyle Number: 19424812-07-NOSize: 48.3" Dia. X 51.1" HFinish: Dark SmokeLamp: (12) 60W Candelabra Not
Included60 Watts per Light (720 total)
Voltage: 120V
Notes:**Mounting Height to be 11'-6" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Kitchen Island PendantManufacturer: Dering HallName: JBS Chamont Lavalier Model Number: 1550Size: 10.5"H x 6.25"W, 36"OAHFinish: BrassLamp: (1) E12 40W equivalent LEDNote: Fixture has a custom OAH
dimension
Notes:**Mounting height to be 6'-0" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture **LONG LEAD TIME: fixture is made to order Contractor to order well in advance.
Contact InformationRecommended Vendor: Jonathan Browning StudiosAddress: 30 Sheridan Street
San Francisco, ca 94103Website: www.joathanbrowninginc.com
Description: Wall SconceManufacturer: Circa LightingProduct: Melange Large ElongatedModel Number: KW 2013AB-ALBSize: 20"H x 4.25"W x 3.5"DFinish: Antique Burnished BrassShade Finish: AlabasterLamp: (2) 12 LED B
Notes:**Mounting height to be 5'-10" to center of fixture **Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Circa LightingAddress: 513 West Jones St.
Savannah, GA 31401Website: www.circalighting.com
Contact: Jenna WileyPhone: (877) 762-2323 ex 7886Email: [email protected]
Description: Linear PendantManufacturer: Hubbardton ForgeStyle Name: Cityscape LED PendantStyle Number: 139736D-10-NOSize: 51.9"L x 5.3"W x 15.5"HFinish: Black/ Soft GoldLamp: LED 56 WattLED Temperature: 2700KInput: 100-120vAC
Notes:**Mounting height to be 5'-8" to Bottom of Fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Pendant LightManufacturer: Hubbardton ForgeStyle Name: Otto 5 Light PendantStyle Number: 134407-31-YE489Size: 18.9"L x 39.6"W x 8.9"HOverall Height: 20-70"HFinish: Polished Brass/ BlackLamp: (10) T3 Capsule, 20W max.Voltage: 120V
Notes:**Mounting height to be 6'-0" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Wall SconceManufacturer: Currey and CompanyStyle/Number: Wharton 5031Size: 16" H x 6"D x 10"WMaterial: Wrought Iron/ GlassFinish: Zanzibar Black/ GoldLamp: (2) 60W Incandescent
120W Max total
Notes:**Mounting height to be 5'-4" to center of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: ChandelierManufacturer: Currey and CompanyStyle/Number: Coquette 9000-0014Size: 30" Dia. X 20" HMaterial: Metal/ Optic CrystalFinish: Antique BrassLamp: (8) 40W Incandescent
320W Max Total
Notes:**Mounting Height to be 6'-0" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Wall SconceManufacturer: Circa LightingStyle/Number: Boston Functional Single
Arm Library Light SL2922Backplate: 4.75" RoundHeight: 25"Shade Dimensions: 2" x 7" x 5"Extension: 9"-25"Lamp: (1) 60W Type A
Notes:**Mounting Height to be 5'-0" to J-box**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Circa LightingAddress: 513 West Jones St.
Description: Linear PendantManufacturer: Focal PointStyle Name: Nera LinearModel Number: FNRS-FL60-1000LF-35K-1C-
UNV-LDI-HS-CLV96-WH-16'-C8Size: 96.75"L x 5.79"W x 1.6"HRun Length: 16'-0"Finish: WhiteLamp: LED 18-36WColor Temp: 3500K LED
Notes:**Mounting Height to be 14'-10" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Hossley Lighting AssociatesAddress: 12466 Los Indios Trail Suite 210
Description: Ceiling FanManufacturer: The Modern Fan Co.Collection: BallStyle/Number: BAL-GW-52-WH-NLSize: 52" Blade SweepFinish: Gloss White (GW)Blades: White (WH)
Notes:**Mounting Height to be 13'-6" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: The Modern Fan Co.Address:
LDI-TF-WH-8'Installation Type: Trimless Mud-inSize: 2.64"WRun Length: 8'-0"Finish: WhiteLamp: LED 18-36WColor Temp: 3500K LED
Notes:**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Hossley Lighting AssociatesAddress: 12466 Los Indios Trail Suite 210
Description: Wall SconceManufacturer: Hubbardton ForgeStyle Name: Aperture Vertical SconceStyle Number: 217520-10-B273Size: 21.5"H x 6.5"W x 3.2" DFinish: Black 10Lamp: (1) G-9, 40W Max IncludedVoltage: 120V
Notes:**Mounting Height to be 5'-10" to center of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Wall SconceManfacturer: UltraLightsStyle Name: Synergy Wall Sconce 0485Dimensions: 14"H x 7.5"W x 4"DBody Finish: Mideival BronzeShade Color: White SwirlLamp: (2) E12 Candelabra 50W Max
Each, 100W TotalVoltage: 120V
Notes:**Mounting Height to be 5'-10" to center of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Alison and CompanyAddress: P.O. Box 116936
Description: Pendant LightManufacturer: LBL LightingStyle Name: Menara Grande PendantStyle Number: LP890WHLED827Size: 22"Dia. X 20"HFinish: WhiteLamp: E26 LED A21 19w 80 CRITemperature: 2700KVoltage: 120V
Notes:**Mounting Height to be 9'-0" to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Description: Recessed LinearManfacturer: Juno LightingStyle/Number: 1X4 LED Recessed Direct/Indirect
S1X4BO-3930U-WH3-1X4DWASize: 47.75"L x 11.75"W x 5"HMaterial: Opal DiffuserFinish: WhiteLamp: 36 watt LED, 3000K
Notes:**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Spectrum LightingAddress: Corporate Center III, 8868 Research Blvd #104
Description: Pendant Manufacturer: Circa LightingStyle/Number: Caged Small LanternSize: #SC5159Size: 16"H, 16"WFinish: BronzeShade: Natural PaperLamp: (1) 60W
Notes:**Mounting Height to be 7'-6" AFF to bottom of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Circa Lighting Address: 513 West Jones Street
Description: Wall SconceManufacturer: Modern FormsStyle/Number: WS-W5416-BKSize: 16"H x 4 3/4"WFinish: BlackLamp: 11W
Notes:**Mounting Height to be 6'-4" AFF to center of fixture**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: Modern FormsAddress: 44 Harbor Park Drive
Port Washington, NY 11050Website: www.modernforms.com
Location: Leasing (undercounter at desk)Kitchen (recessed into shelving)Rooftop (below built-in seating)
Description: LED Tape LightManufacturer: American LightingStyle/Number: Trulux Standard
STL-WW-33-24V 30KSize: Per locationLamp: LED 3000K
Notes:**Refer to Interior Elevations for more information**General Contractor to submit lighting submittal package to interior Designer for review**Lighting subcontractor to select and submit all lighting accessories associated with this fixture
Contact InformationRecommended Vendor: American LightingAddress:
One-PieceModel: K-3615-0Flow Rate: 1.28gpfColor: White
Notes:**Contractor to submit equal alternates for Interior Designer's approval**Refer to manufacturer's installation instructions for rough-in dimensions and any additional parts needed
Contact InformationRecommended Vendor: KohlerAddress: 444 Highland Dr
Kohler, WI 53044Website: www.us.kohler.com
Contact: Customer Service Phone: 800-456-4537Email:
w/ Top SpudModel: K-4904-ET-0Flush Valve: K-10668-CP (touchless)Flow Rate: 0.125 to 1.0gpfColor: WhiteSize: 27-5/8"H x 18-1/4"W x 14-1/2"L
Notes:**Plumbing contractor to submit equal alternates for urinal and all required parts **Refer to manufacturer's installation instructions for rough-in dimensions and any additional parts needed
Contact InformationRecommended Vendor: KohlerAddress: 444 Highland Dr
Kohler, WI 53044Website: www.us.kohler.com
Contact: Customer Service Phone: 800-456-4537Email:
Description: Single Handle High ArcPulldown Prep / Bar Faucet
Manufacturer: MoenStyle: S62308Finish: Matte BlackSize: 14 5/8"H x 7" ProjectionMounting: Single Hole Installation
Notes:**Plumbing contractor to submit equal alternates for urinal and all required parts **Refer to manufacturer's installation instructions for rough-in dimensions and any additional parts needed
Contact InformationRecommended Vendor: MoenAddress: 25300 Al Moen Drive
North Olmsted, Ohio 44070Website: www.moen.com
Contact: Customer Service Phone: 800-289-6636Email:
Description: Trough SinkManufacturer: Just ManufacturingStyle: Custom Size ProgramType: #304 Stainless Steel Single Basin
Undermount Dimensions: O.D. 11” front to back x 56” lt. to rt.
I.D. 9” front to back x 54” lt. to rt. x 6" Deep
Gauge: 16To Include: Zero Radius cornersTo Include: 4 Drain Grooves
Notes:**Plumbing contractor to submit equal alternates for urinal and all required parts **Refer to manufacturer's installation instructions for rough-in dimensions and any additional parts needed
Contact InformationRecommended Vendor: Just ManufacturingAddress: 9233 King Street
Franklin Park, IL 60131Website: www.justmfg.com
Contact: Jennifer VargasPhone: 847-678-5150 x 122Email: [email protected]
Description: Single Handle Pull-Down FaucetManufacturer: PfisterDimensions: 15 25/32"H x 9 1/32" ProjectionStyle: Pasadena Model Number: F-529-7PDS-SSFinish: Stainless Steel Mounting: Single Hole Installation
Notes:**Plumbing contractor to submit equal alternates for urinal and all required parts **Refer to manufacturer's installation instructions for rough-in dimensions and any additional parts needed
Notes:**Secondary exterior doors to be split finished so that interior side is PT-2 and exterior side is a paint color determinted by owners**Confirm door height and thickness with Architectural Door Schedule**Confirm all Fire Rating requirements with Architect**Contractor to provide or equal door option for Interior Designer's approval **Stained wood sample to be provided for Interior Designer approval prior to ordering
Notes:**Confirm door height and thickness with Architectural Door Schedule**Confirm all Fire Rating requirements with Architect**Contractor to provide or equal door option for Interior Designer's approval
Description: Hidden Door with cladding to match wall
Provided By: Ameritech MillworksStyle: Flush solid core door with
wood plank (WP-1)cladding & concealed hinges
Height: 8'-0"Cladding: Wood Plank WP-1
Plank
Notes:**Confirm door height and thickness with Architectural Door Schedule**Confirm all Fire Rating requirements with Architect**Contractor to provide or equal door option for Interior Designer's approval **Refer to Interior Elevations for more information
Contact InformationRecommended Vendor: Ameritech MillworksWebsite: 2300 West Marshall Drive
Grand Prairie, Texas 75051www.amillworks.com
Contact:Phone: John GilliamEmail: 817-825-1866 cell
Description: Hidden Door with cladding to match wall
Provided by: Ameritech MillworksStyle: Flush solid core door with
wainscot (AE-5) claddingand concealed hinges
Height: 8'-0"Cladding: Painted wainscot AE-5
Notes:**Confirm door height and thickness with Architectural Door Schedule**Confirm all Fire Rating requirements with Architect**Contractor to provide or equal door option for Interior Designer's approval **Stained wood sample to be provided for Interior Designer approval prior to ordering**Refer to Interior Elevations for more information
Contact InformationRecommended Vendor: Ameritech MillworksWebsite: 2300 West Marshall Drive
Grand Prairie, Texas 75051www.amillworks.com
Contact:Phone: John GilliamEmail: 817-825-1866 cell
Description: USB power DeviceManufacturer: LevitonFinish: Light AlmondMounting: Ref. Interior Elevation
Notes:**Contractor to submit equal alternates**Refer to Interior Design Elevations for more information**Confirm with owner where any additional USB outlet locations are needed.
Notes:**Install per manufacturers recommendations**Contractor to purchase all coordinating items to used with this product**Contractor to use "equal" alternate, but it must allow plug to be completely recessed with a notch in the cap to manage cord, allowing the cap to close shut.
Description: Fire RibbonManufacturer: SparkProduct: 4' Direct Vent Fire RibbonViewing Area: 48.75"W x 13.75"HOuter Dimensions: 59.25"W x 34.25"H x 21.25"DGas Type: Natural or LP/ PropaneInterior Color: Satin BlackSafety Screen: Yes
Notes:**Confirm all techinical data and information with Architect and MEP**Confirm accessory features with Interior Designer and owner prior to ordering
Contact InformationRecommended Vendor: SPARK Modern Fires