ABSTRACT: Post and cores can be fabricated either intraorally on the tooth or indirectly on the die. Indirect techniques for the fabrication of posts and cores provide some advantages over direct techniques. Fabricating the resin pattern in vivo by the bead brush technique may lose time and effort for both the dentist and the patient. In the described technique , a vinyl polysiloxane matrix is used for indirect fabrication of custom post and core wax pattern without the preparation of a die. The final instrument used to prepare the post space corresponds to the size and shape of the final post. Hence an index of the same is made with vinyl poly siloxane impression material and used to fabricate a wax pattern. Using an indirect technique, posts prepared with acrylic resin may become locked into the cast undercuts. Use of wax for the post fabrication reduces this problem however insertion and removal of wax may cause distortion or breakage of the pattern. The material used in the technique is inlay wax. The advantages of this technique include the precise fit of the post into the post space along with less chairside time, as the wax pattern is not fabricated inside the patient's mouth. 1 2 Seema Sajood Mufti, Achyut Sinha 1 .Consultant Prosthodontist at Family Health Dental Centre, Srinagar, Jammu and Kashmir. 2 .Post Graduate Student, Dept. of Prosthodontics, Rama Dental College Hospital And Research Centre , Kanpur, Uttar Pradesh. INTRODUCTION : The successful treatment of a badly broken down tooth with pulpal disease depends not only upon a good endodontic therapy, but also on a good prosthetic reconstruction following endodontic therapy. The purpose of the post is to retain a core that can be used to retain definitive prosthesis. When a substantial amount of coronal structure is lost , a cast post and core is indicated. Canal configuration aids in making a choice between a custom designed post and a prefabricated post . If the selected post closely fits or conforms to the canal shape and size , it may be a more conservative option because less dentin removal is required, thus enhancing fracture resistance of the tooth, as well as retention of the post. It has been reported that if a canal requires extensive preparation , a well adapted cast post and core will be more retentive than a prefabricated post that does not match the canal configuration. The cast post and core is custom fitted to the prepared root canal space and designed to resist tortional forces. The quick fabrication and exact fitting of custom –made posts is the aim of fixed prosthodontic clinicians. CASE REPORT : A 35 year old female patient with root canal treated maxillary left lateral incisor (22) reported to the prosthodontic clinic with grossly decayed coronal structure. The treatment options figured out were: Restoration of the fractured tooth with a custom made metal post and core with fabrication of PFM crown. Amalgam coronal radicular dowel post Composite restoration Amalgam restoration It was planned to rehabilitate the tooth with a custom made metal post and core using an indirect technique. Other A MODIFIED INDIRECT TECHNIQUE FOR FABRICATION OF A POST AND CORE WAX PATTERN USING A VINYL POLY SILOXANE MATRIX. Key Words: post, post space, wax pattern, indirect technique. Source of support : Nil Conflict of interest: None Journal of Dental Sciences University University Journal of Dental Sciences, An Official Publication of Aligarh Muslim University, Aligarh. India 85 University J Dent Scie 2017; No. 3, Vol. 1 Case Report
3
Embed
18 A MODIFIED INDIRECT TECHNIQUE MODIFIED... · The advantages of this technique include the ... amalgam coronal radicular pour and restoring with admix was ruled out, due to their
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ABSTRACT: Post and cores can be fabricated either intraorally on the tooth or indirectly on the
die. Indirect techniques for the fabrication of posts and cores provide some advantages over
direct techniques. Fabricating the resin pattern in vivo by the bead brush technique may lose time
and effort for both the dentist and the patient. In the described technique , a vinyl polysiloxane
matrix is used for indirect fabrication of custom post and core wax pattern without the preparation
of a die. The final instrument used to prepare the post space corresponds to the size and shape of
the final post. Hence an index of the same is made with vinyl poly siloxane impression material
and used to fabricate a wax pattern. Using an indirect technique, posts prepared with acrylic resin
may become locked into the cast undercuts. Use of wax for the post fabrication reduces this
problem however insertion and removal of wax may cause distortion or breakage of the pattern.
The material used in the technique is inlay wax. The advantages of this technique include the
precise fit of the post into the post space along with less chairside time, as the wax pattern is not
fabricated inside the patient's mouth.
1 2Seema Sajood Mufti, Achyut Sinha1.Consultant Prosthodontist at Family Health Dental Centre, Srinagar, Jammu and Kashmir.2.Post Graduate Student, Dept. of Prosthodontics, Rama Dental College Hospital And Research
Centre , Kanpur, Uttar Pradesh.
INTRODUCTION : The successful treatment of a badly
broken down tooth with pulpal disease depends not only upon
a good endodontic therapy, but also on a good prosthetic
reconstruction following endodontic therapy. The purpose of
the post is to retain a core that can be used to retain definitive
prosthesis. When a substantial amount of coronal structure is
lost , a cast post and core is indicated.
Canal configuration aids in making a choice between a
custom designed post and a prefabricated post . If the selected
post closely fits or conforms to the canal shape and size , it
may be a more conservative option because less dentin
removal is required, thus enhancing fracture resistance of the
tooth, as well as retention of the post. It has been reported that
if a canal requires extensive preparation , a well adapted cast
post and core will be more retentive than a prefabricated post
that does not match the canal configuration. The cast post and
core is custom fitted to the prepared root canal space and
designed to resist tortional forces. The quick fabrication and
exact fitting of custom –made posts is the aim of fixed
prosthodontic clinicians.
CASE REPORT : A 35 year old female patient with root
canal treated maxillary left lateral incisor (22) reported to the
prosthodontic clinic with grossly decayed coronal structure.
The treatment options figured out were:
Restoration of the fractured tooth with a custom made metal
post and core with fabrication of PFM crown.
Amalgam coronal radicular dowel post
Composite restoration
Amalgam restoration
It was planned to rehabilitate the tooth with a custom made
metal post and core using an indirect technique. Other
A MODIFIED INDIRECT TECHNIQUE FOR FABRICATION OF A POST AND CORE WAX PATTERN USING A VINYL POLY SILOXANE MATRIX.
Key Words:
post, post space,
wax pattern,
indirect technique.
Source of support : Nil
Conflict of interest: None
Journal of Dental Sciences
University
University Journal of Dental Sciences, An Official Publication of Aligarh Muslim University, Aligarh. India 85
University J Dent Scie 2017; No. 3, Vol. 1
Case Report
treatment options were ruled out due to their unreliability
regarding this particular case.
As the coronal structure of the tooth was grossly decayed
amalgam coronal radicular pour and restoring with admix was
ruled out, due to their reduced tolerance to functional stresses
and diminished strength to retain a core. Composite and
amalgam restorations were also ruled out for the same reason.
In the following case report indirect technique for fabrication
of post and core has been discussed. The material used for
fabrication of the post and core wax pattern was inlay wax.
Further the patterns are casted using the conventional lost wax
technique in base metal alloy and adjusted on the cast. After
the adjustment , the cementation of the post has been done
with GIC cement. The technique is particularly useful for
short post preparations where precise fit is necessary for
retention.
PROCEDURE : Using a long flat and tapered diamond bur
prepare the post space by removing gutta percha from the
coronal two thirds of the root leaving the apical 4-5 mm of the
canal as in the usual procedure.
Shape the canal as needed in such a manner that the post space
has almost the same configuration as that of the diamond bur
that is used to prepare and shape it. Mark the length of the post
space on the bur with a red pencil.
Now , mix a small amount of vinyl polysiloxane impression
material (putty) into a small block and before it sets make an
impression of the flat and tapered bur , which corresponds to
the prepared post space of the endodontically treated tooth by
sliding it into the putty block, upto the red pencil mark.
Remove the bur from the putty once it is set. Now take a thin
orthodontic wire of (21guage) and place it into the post space
impression created inside the putty block. The wire will
loosely fit into this hole.
Apply vaseline over the wire as well as on the space created
inside the putty block and fabricate a wax pattern over it using
the putty block as the index. Continue core build up. Once the
pattern is completed it is removed from the putty index and
casted in the usual manner.
DISCUSSION : The technique is particularly useful for short
post preparations where precise fit is necessary for retention.
Advantages of this technique include:
1. Patient comfort as no tedious wax pattern fabrication
inside patient's mouth.
2. Less chairside time.
3. Elimination of pouring a cast.
4. Superior adaptation to the root canal.
5. Eliminates the need for developing full contoured
patters and their removal from the working cast for
investment.
6. Disadvantages of distortion of wax pattern while
removing from either patient's mouth or working
cast are eliminated.
IMPRESSION OF FLAT AND TAPERED BUR USING
POLYVINY SILOXANE
ORTHODONTIC WIRE THINNED TO LOOSELY FIT
INTO THE PUTTY INDEX
O R T H O D O N T I C W I R E A N D P O S T S P A C E
IMPRESSION GREASED WITH VASELINE FOR EASY
RETRIEVAL OF WAX PATTERN.
ORTHODONTIC WIRE FITTING LOOSELY INTO POST
SPACE PUTTY IMPRESSION WAX PATTERN
FABRICATED USING INLAY WAX
University Journal of Dental Sciences, An Official Publication of Aligarh Muslim University, Aligarh. India 86
University J Dent Scie 2017; No. 3, Vol. 1
WAX PATTERN RETRIVED FROM PUTTY INDEX FOR
CASTING.
REFERENCES
1. Rosensteil SF, Land MF, Holloway JA. Custom -
cast post fabrication with a thermoplastic material. J
Prosthet Dent. 1997; 77: 209-11.
2. Rosensteil SF, Land MF, Fujimoto J. Contemporary
fixed prosthodontics. in: 3rd ed: CV Mosby, St.
Louis; 2001:300.
3. Kanoy BE , Brantley CF, J Prosthet Dent;
1995:54;6757-9.
4. Gavelis JR, Hope DM, J Prosthet Dent;
1984:51;1:55-9.
University Journal of Dental Sciences, An Official Publication of Aligarh Muslim University, Aligarh. India 87