www.concept-laser.de .material data 27 Co 58,933 remanium star CL powered by Dentaurum CoCrW-alloy (powder) acc. to EN ISO 9693 / DIN EN ISO 22674, Type 5 With an appropriate approval* remanium star CL can be used for production of metallic restaurations by means of the metal laser melting process. CHEMICAL COMPOSITION Component Mass (%) Co 60,5 Cr 28 W 9 Si 1,5 Other elements <1 %: Mn, N, Nb, Fe. free from nickel, beryllium and gallium With an appropriate approval* remanium star CL can be used for production of crowns and bridges, frames for metal ceramic veneering, cast partials, primary – and secondary parts for combined restorations. RANGE OF APPLICATION 0483 LaserCUSING | Source: LAC - Laser Add Center GmbH
2
Embed
1709 remanium star CL layer - Concept Laser GmbH data 27 Co 58,933 remanium star CL powered by Dentaurum CoCrW-alloy (powder) acc. to EN ISO 9693 / DIN EN ISO 22674, Type 5 With an
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.concept-laser.de
.material data
27
Co58,933
remanium star CL powered by Dentaurum
CoCrW-alloy (powder) acc. to EN ISO 9693 / DIN EN ISO 22674, Type 5
With an appropriate approval* remanium star CL can be used for productionof metallic restaurations by means of the metal laser melting process.
CHEMICAL COMPOSITION
Component Mass (%)
Co 60,5
Cr 28
W 9
Si 1,5
Other elements <1 %: Mn, N, Nb, Fe. free from nickel, beryllium and gallium
With an appropriate approval* remanium star CL canbe used for production of crowns and bridges, frames for metal ceramic veneering, cast partials, primary – and secondary parts for combined restorations.
RANGE OF APPLICATION
0483
Las
erC
USI
NG
| So
urce
: LA
C -
Las
er A
dd C
ente
r G
mbH
Concept Laser GmbHAn der Zeil 8D 96215 Lichtenfels
TECHNICAL DATA IN LINE WITH DIN EN ISO 9693 / DIN EN ISO 22674AFTER RECOMMENDED HEAT TREATMENT
09/2
017
| Sub
ject
to
tech
nica
l cha
nges
. Ti
tle
phot
o: fi
nam
edia
.de
Mic
rose
ctio
ns: D
enta
urum
Gm
bH &
Co.
KGA
rtw
ork:
bra
ndne
w-d
esig
n.de
3-unit bridge etched (100 x)
MICROSECTION
3-unit bridge (16 x)
HEAT TREATMENT MICROSTRUCTURE
Perform heat treatment under an argon atmosphere. Heat up to 1150°C. Maintain temperature for 1 hour. Allow the components to cool down to 300°C in the oven.
Components made from the cobalt-chromium alloy remanium star CL display a homogeneous, pore-free structure after they are constructed by means of the metal laser melting process LaserCUSING.