17 TW SERIES Amphenol’s 17TW series hybrid D-Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors are supplied with screw-machined contacts which are fixed in the insulator. The board-mount product offering includes straight and right-angle terminations. The cable connectors are available in crimp and solder terminations. These connectors are compatible with the infra-red reflow soldering process. The 17TW series offers eighteen housing configurations in five shell sizes. • Industrial • Telecom • Any industry standard I / O connections Hybrid Connector TELEPHONE: (416) 754-5656 F AX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM Current Rating: Signal Contacts 7.5 amps with 10 amp peaks Power Contacts: PCB, Solder-Cup, Crimp 10 to 40 amps 0.5 amps Current Rating: Signal & Power Contacts 300 VRMS at 50 Hz Coax Contacts 150 VRMS at 50 Hz Coax Contacts Frequency range: 0 -1 GHz Attenuation: 0.2 dB V.S.W.R.: 1.4 (+0.04/GHz) Characteristic Impedance 50 Ohms Dielectric Withstanding Voltage ≥ 1000V R.M.S. at 50Hz Insulation Resistance ≥ 5000 megaohms at 500 V D.C. Contact Resistance ≤5 milliohms Shell Resistance (electrical grounding) ≤1 milliohm Contact Retention Force in Dielectric Material >40 N Maximum Mating and Unmating Force with dimples A size: 80 N B size: 100 N C size: 150 N D size: 180 N E size: 70 N without dimples A size: 50 N B size: 80 N C size: 120 N D size: 160 N E size: 30 N Process Compatibility IR - air convection: 500°F (260°C) for 20 seconds Soldering iron: 500°F (260°C) for 30 seconds Mating Cycles ≥ 200 (16μ"(.41μm) gold) ≥ 500 (30μ"(.76μm) gold) Blind Mating System Available upon request Polarization Available with locking accessories, consult factory Derating Curves for Power Contacts: see page 51 Pull-out Force for Crimped Contacts: see page 51 Approvals: UL - File number: E 64911 / CSA - File number: LR 57744 Shell Dimensions: See page 64 SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA Shell Resistance (electrical grounding) ≤1 milliohm Operating Temperature 67°F (-55°C) to 311°F (+155°C) with peaks up to 356°F (180°C) Damp Heat 56 days 104°F (40°C) at 95% RH Salt Spray 48 hours Shells Steel with tin plating or yellow chromate with or without grounding dimples Insulators High temperature black thermoplastic Signal Contacts Female Machined bronze Male Machined brass Plating 16μ"(.40μm) or 30μ"(.76μm) gold over 79μ"(1.97μm) nickel Coax Contacts Female Machined bronze Male Machined brass Plating Inner conductor: 16μ"(.40μm) gold or 30μ"(.76μm) gold over 79μ"(1.97μm) nickel Outer ring: 10μ"(.25μm) gold over 79μ"(1.97μm) nickel Terminations Tinned. (Solder cup and crimp terminations are gold flash.) Power Contacts Female Machined bronze Male Machined brass Plating Contacts: 16μ"(.40μm) gold or 30μ"(.76μm) gold over 79μ"(1.97μm) nickel Terminations Tinned. (Solder cup and crimp terminations are gold flash.) Brackets Steel with tin plating Front Jackscrews Brass with tin plating or yellow chromate Rear Clinch Nuts Brass with tin plating or yellow chromate Boardlocks: Bronze with tin plating Stand-offs Brass with tin plating
15
Embed
17 TW SERIES - Amphenol Canada · 17 TW SERIES Amphenol’s 17TW series hybrid D-Subminiature connectors are available with power, coax, high voltage and signal contacts assembled
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
17 TW SERIES
Amphenol’s 17TW series hybrid D-Subminiature connectors areavailable with power, coax, highvoltage and signal contactsassembled in the same connectorbody. These connectors aresupplied with screw-machinedcontacts which are fixed in theinsulator.
The board-mount productoffering includes straight andright-angle terminations. Thecable connectors are available incrimp and solder terminations.These connectors are compatiblewith the infra-red reflowsoldering process. The 17TWseries offers eighteen housingconfigurations in five shell sizes.
Blind Mating System Available upon requestPolarization Available with locking accessories, consult factoryDerating Curves for Power Contacts: see page 51Pull-out Force for Crimped Contacts: see page 51Approvals: UL - File number: E 64911 / CSA - File number: LR 57744Shell Dimensions: See page 64
SPECIFICATIONS:
MATERIALS AND PLATINGS
ELECTRICAL DATA
CLIMATIC DATA
MECHANICAL DATA
Shell Resistance (electrical grounding) ≤1 milliohmOperating Temperature 67°F (-55°C) to 311°F (+155°C)
with peaks up to 356°F (180°C)Damp Heat 56 days 104°F (40°C) at 95% RHSalt Spray 48 hours
Shells Steel with tin plating or yellow chromatewith or without grounding dimples
Insulators High temperature black thermoplasticSignal ContactsFemale Machined bronzeMale Machined brassPlating 16µ"(.40µm) or 30µ"(.76µm) gold
or 30µ"(.76µm) gold over 79µ"(1.97µm) nickelOuter ring: 10µ"(.25µm) gold over 79µ"(1.97µm) nickel
Terminations Tinned. (Solder cup and crimp terminations are gold flash.)Power ContactsFemale Machined bronzeMale Machined brassPlating Contacts: 16µ"(.40µm) gold or 30µ"(.76µm) gold
over 79µ"(1.97µm) nickelTerminations Tinned. (Solder cup and crimp terminations are gold flash.)Brackets Steel with tin platingFront Jackscrews Brass with tin plating or yellow chromateRear Clinch Nuts Brass with tin plating or yellow chromateBoardlocks: Bronze with tin platingStand-offs Brass with tin plating
blank .122 (3.10) mounting hole4F 4-40 Front female screwlock4R 4-40 Rear screwlock3F M3 Front female screwlock3R M3 Rear screwlock
A514 Blind mating system:
Loaded Contacts(see page 48.)MP3SV US footprint, 40 amp power and signal combinationMP2SV US footprint, 20 amp power and signal combinationMCSV US footprint, coax and signal combinationMSV US footprint, signal only
MP3V US footprint, 40 amp power only (3W3, 5W5, 8W8)MP2V US footprint, 20 amp power only (3W3, 5W5, 8W8)MCV US footprint, coax only (3W3, 5W5, 8W8)
EP3SV European footprint, 40 amp power and signal combinationEP2SV European footprint, 20 amp power and signal combination
ESV European footprint, signal onlyEP3V European footprint, 40 amp power only (3W3, 5W5, 8W8)EP2V European footprint, 20 amp power only (3W3, 5W5, 8W8)
HP3SV Mixed footprint, 40 amp power and signal combinationHP2SV Mixed footprint, 20 amp power and signal combinationHCSV Mixed footprint, coax and signal combinationHSV Mixed footprint, signal only
HP3V Mixed footprint, 40 amp power only (3W3, 5W5, 8W8)HP2V Mixed footprint, 20 amp power only (3W3, 5W5, 8W8)HCV Mixed footprint, coax only (3W3, 5W5, 8W8)
Code Contact TypeP Pin (male)S Socket (female)
XXX - X - XWX - X - XXXX - XX - XXXX - X
Special DeviationsHigh voltage contactsFiber Optic contactsConsult factory
Panel CutoutsOptimal cutout for rear mounting Standard cutout
Shell Contact A B B/ C D D/ E F F/ G G/ H JSize P: Pin ±.010 0/-.008 +.008/0 ±.004 0/-.010 +.010/0 ±.008 +.002/-.008 +.004/-.008 +.004/.008 ±.004 +.004/-.016 0/-.020
DERATING CURVE FOR HIGH POWERCONTACTS (Size 8)CURRENT RATING AND OPERATING
TEMPERATURE
Tested according to C E 1512-3, test 5b
DERATING CURVE FOR SIGNALCONTACTS (Size 20)CURRENT RATING AND OPERATING
TEMPERATURE
Tested according to C E I 512-3, test 5b
The following chart indicates the voltage rating (AC - Vrms - 50 Hz)
and breakdown voltage for an operating temperature of 77OF (25OC)
under 50% relative humidity.
Voltages are applied to male and female connectors mated or unmated.
WIRE RETENTION FORCE ON CRIMP CONTACTS BREAKDOWN VOLTAGE
Sea Level 19,685 (6,000 m) 68,898 (21,000 m)
Contact Types Excitation Test Excitation Test Excitation TestCoax 1300 V 900 V 900 V 600 V 400 V 300 VPower 1500 V 1000 V 1000 V 600 V 500 V 300 VVoltage 3800 V 2800 V 2300 V 1700 V 650 V 450 V