16th Annual NRC Railroad Equipment Auction NRC Auction - Blackmon Broch… · Hannay 12v electric hose reel with hose ESCO weld demolder Matweld bull nose grinder Matweld straight

Blackmon Auctions, Inc. Thomas Blackmon Realty

www.blackmonauctions.com PO Box 7464, Little Rock, Arkansas 72207

Thomas BlackmonPresident/Owner/Auctioneer

501-352-4702

A U C T I O N I N F O R M A T I O N :Auction Site: Blackmon Auctions, 425 Blackmon Road, Lonoke, Arkansas 72086 (address via Google Maps: goo.gl/Hwt19F)

Date/Time: Wednesday, April 24 - starts at 8:00am and will finish around 1:00pm

Equipment Inspection: 8:00am - 5:00pm, Tuesday, April 23 officially, but practically speaking anytime in the weeks preceding the auction.

Shipment & Delivery of Equipment: To schedule shipment or delivery of equip-ment for the auction, please contact Thomas Blackmon of Blackmon Auctions at 501-352-4702 or [email protected].

Hotel: Courtyard by Marriott Little Rock Downtown (521 President Clinton Ave, Little Rock, AR 72201). The discounted room block rate of $109/per night (before taxes) will be available until April 10th. Please click here to book your room at the discounted room block rate.

Airport: Bill and Hillary Clinton National Airport (8 minutes from Courtyard by Marriott Little Rock Downtown)

Happy Hour/Social Event:A happy hour event will be held from 5-11 PM on the evening of April 23rd at the lobby bar of the Courtyard by Marriott Little Rock Downtown. Everyone who is attending the auction is welcome at the happy hour. We hold this happy hour every year the night before the auction, and it is always a good time and a good opportunity to talk about the equipment available the following day. Plus, drinks are on us!

16th Annual NRC Railroad Equipment AuctionWednesday, April 24 / 8 am / Lonoke, AR

Ballast RegulatorsKershaw 26-2 ballast regulator, S# 26-1184-77, Detroit diesel, recently on job and runs good1991 Kershaw 46-2 ballast regulator, S# 46-294-911988 Kershaw 46-1 ballast regulator, S# 46-234-88

Anchor Squeezer2002 HTT, S# 6300612

Tie DrillHTT W132 tie drill, S# 257370

Spikers2008 Nordco CX-UG Hammer, S# 41036388-UGHarsco W96 spike driver, S# 257555, on job in mid 2018Harsco W96 spike driver, S# n/a, engine runs strong but has

been sitting for a while Spike Pullers2008 Norcco SP2R-A, S# 310126, enclosed cab, John Deere dieselNordco Super Claw LS-HC, S# 350184-RB-UG2006 Nordco M-3 B ride on spike puller2001 HTT W113E1, S# 257581Fairmont Tamper W113F, S# 257390, John Deere dieselFairmont W113, single side

Tie CranesKershaw 12-5-UP, S# 12-1000-99, John Deere dieselKeshaw 12-12, S# 12-1314-09, Cummins dieselEvans 2170, S# n/aJackson 950 tie crane, S# 152617

Tie Remover Inserter Fairmont Tamper RMC305 model B, S# 2565701998 HTT Super TKO, S# 2573641992 Fairmont TR-10 Tie Inserter, SN: 5591402

Ballast VibratorCanron Tamper CSC-2, S# 4481696

Fire and Water CartsK&G Manufacturing FC4101 cart, S# FC003-303, hose reel

and tank(2) Budde Ent. BE-FC-225 carts, 2 hose reels and 225 gal tank

ClipperRacine S-Clipper dual workhead clipper, S# 168-06, John

Deere diesel2010 Cembree PCM-2P CAA E-Clip machine, walk behindKershaw 8-2 dual clip applicator

Rough Terrain CranesGalion 150A crane, S# n/a, 30k lb capacity, 360 rotation, 3 stage boom, Detroit diesel

Speed SwingsJohn Deere 644G speed swing, S# DW544GD552187, Mountain Manufacturing speed swing conversion

S#4471075, hyrail, enclosed ROPS, very good unit2002 Pettibone 445E Speedswing, SN: 32012001 Pettibone 445E Speedswing, SN: 3195Pettibone 360, S# 2914, enclosed ROPS, hyrail, no stinger,

Detroit dieselSwingmaster 441-B, S# 1-2142, hyrail, enclosed cab, Detroit diesel, 4wd, 4ws, stinger boomPettibone 441-B, S# 2667, hyrail, enclosed cab, Detroit diesel,

stinger boom, 4wd, 4wsPettibone 441-B, S# n/a, hyrail, no stinger, Detroit dieselPettibone 445-D, S# 2997, no stinger, Detroit dieselPettibone 441B, S# 2203, bucket, 4ws, 4wd

Spike ReclaimersHarsco Plate Plucker, S# n/a

Brooms1984 Canron DB-505 Double Broom Regulator, SN: 1786554

Flatbed Trucks2006 International 4400, S# 1HTMKAAN27H517620, DT466E engine, hyrail, automatic, 27910 mi

For Consignment Information Contact Thomas Blackmon

[email protected]

Pickup and Service Trucks2011 Ford F350 Hyrail Truck, Ext Cab, 4x4, Diesel, 8’ Knapheide Service Body, SN: 1FT8X3DT1BEC88167 2008 Chevrolet 3500 Hyrail Truck, Crew Cab, 4x4, Diesel, LWB, SN: 1GCHK33618F133910

Rotary Dumps1999, Volvo WG64 Hyrail Rotary Dump, DMF 14’ Dump,

RW1630 Rail Gear, SN: 4VHJCCPF6XN865983Welding Trucks

2002 GMC C-7H042 Hyrail Welding Van, 25,950 GVWR, 16’ Van Body, Liftgate, SN: 1GDK7H1CX2J5077662001 Ford F-750 Hyrail Welding Van, 25,900 GVWR, 16’ Van Body, Liftgate, SN: 3FDXF75B71MA74770

Grapple Trucks2007 Sterling LT9500 Hyrail Material Handler, 20K FA, 46K RA, T/A, Northshore 80 Boom, Remote Drive, 22’ Platform Body, SN: 2FZHAZDE17AY332362003Sterling LT9500 Hyrail Material Handler, 58,000 GVWR, T/A, Northshore 80 Boom, Remote Drive, 22’ Plat form Body, RW1630 Rail Gear, SN: 2FZHAZAS63AK69118

Crane Trucks1995 Ford L8000 Hyrail Boom Truck, 18K FA, 40K RA, 346 National Crane, 8 Ton, 18’ Platform Body, RW1630 Rail Gear, SN: 1FDZY82E3SVA76059

Brandt Trucks2002 Western Star 4900 Brandt truck, S# 2WLMALAV92KJ53551, Caterpillar C15 engine, automatic trans, Brandt 3028 loader, 36” magnet, Van Air hydraulic air compressor, rail car coupler, train air, continuous PTO, 57k mi+/-1995 Western Star 4900 Brandt truck, S#2WLPCCCJ15K935909, Caterpillar C15 engine, automatic trans, Brandt 3028 loader, magnet, Van Air hydraulic air compressor, rail car coupler, train air, continuous PTO, 59k mi +/-

Miscellaneous(12) cases of Encore Tie Plugging Compound with 2 applicators (all proceeds from these will be donated to the NRC safety fund)Geismar TM2000 vertical bolterRacine Single Safelock applicator

New and Rebuilt Pandrol Tools(8) New Matweld 02500 10gpm 1” impact wrenchNew Matweld 03900A reversing rail saw

(2) Rosenqvist Roller Grip Rail ThreaderHannay 12v electric hose reel with hoseESCO weld demolderMatweld bull nose grinderMatweld straight stone grinder(2) Matweld 1/2” impact drill/wrench(2) Matweld stand up handle for 01600 impactMatweld chamfer tool with bitMatweld index bar 3-1/26x6(2) Esco insulated joint slingPressure test gaugeMatweld 6” cup stone grinder with triggerMatweld surface grinderPressure gauge with load cell

Absentee ItemsNote: These items will be sold absentee during the live auction. Buyer will be responsible for pick up. For more information on inspection or equipment condition please con-tact Thomas Blackmon at [email protected] Freightliner S2 rail inspection truck, S# 4UZACRDJX 8CZ05970, mileage n/a, truck #25, in Arkola, IL2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS97CX30162, mileage n/a, truck #20, in Beacon Falls, CT2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30170, 306,000 miles, truck #22, in Beacon Falls, CT2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30171, 193,400 miles, truck #23, in Beacon Falls, CT2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30171, 241,700 miles, truck #20, in Arcola, IL

Note: the following items are all in Columbia, SC. The crane loading will be included in the price. The Ballast Regulators will be loaded on May 2nd and all other items on May 3rd.2002 HTT Super Broom, S# 63006322002 HTT Super Broom, S# 63006521998 HTT C154ES Chase Tamper, S# RM9ES011771998 HTT C154ES Chase Tamper, S# RM9ES012281997 HTT C154BR Ballast Regulator, S# 9BR011371997 HTT C154BR Ballast Regulator, S# 9BR011471997 HTT C154BR Ballast Regulator, S# 9BR012171995 HTT C154BR Ballast Regulator, S# 9BR01075

For a list of more itemsplease visit

www.blackmonauctions.com

PresortedFirst Class

US Postage PaidLittle Rock, AR

Permit #1705Blackmon Auctions, Inc.Thomas Blackmon Realty

PO Box 7464, Little Rock, AR 72217

NRC AUCTION

Wednesday, april 24 / 8:00aM / lonoke, ar

www.blackmonauctions.comLive, On-Site Auction & Online Bidding

For Additional Info - Thomas Blackmon 501-352-4702 [email protected]