Top Banner
© 2011 ATRA. All Rights Reserved. 162 IMPORT A TCC shudder symptom on a 2002 Honda Odyssey with a BYBA may be mistaken for a bad Exhaust Gas Recirculation (EGR) Valve. A quick diagnostic test would be to block the EGR ports, if the shudder symptom goes away repair or replace the EGR valve assembly. Honda/A cura 2002 Odyssey Mistaken TCC Shudder
3

162 IMPORT Honda/Acura · Honda/Acura 2005-06 Odyssey Mistaken TCC Shudder (continued) WHATEVER IT TAKES TRANSMISSION PARTS, INC Company Profile Whatever It Takes (WIT) was founded

Apr 28, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: 162 IMPORT Honda/Acura · Honda/Acura 2005-06 Odyssey Mistaken TCC Shudder (continued) WHATEVER IT TAKES TRANSMISSION PARTS, INC Company Profile Whatever It Takes (WIT) was founded

© 2011 ATRA. All Rights Reserved.

162 IMPORT

A TCC shudder symptom on a 2002 Honda Odyssey with a BYBA may be mistaken for a bad Exhaust Gas Recirculation (EGR) Valve. A quick diagnostic test would be to block the EGR ports, if the shudder symptom goes away repair or replace the EGR valve assembly.

Honda/Acura2002 Odyssey Mistaken TCC Shudder

Page 2: 162 IMPORT Honda/Acura · Honda/Acura 2005-06 Odyssey Mistaken TCC Shudder (continued) WHATEVER IT TAKES TRANSMISSION PARTS, INC Company Profile Whatever It Takes (WIT) was founded

© 2011 ATRA. All Rights Reserved.

163IMPORT

Page 3: 162 IMPORT Honda/Acura · Honda/Acura 2005-06 Odyssey Mistaken TCC Shudder (continued) WHATEVER IT TAKES TRANSMISSION PARTS, INC Company Profile Whatever It Takes (WIT) was founded

© 2011 ATRA. All Rights Reserved.

164 IMPORT

An engine vibration during lockup apply may be mistaken for a TCC apply shudder on some 2005-06 Honda Odyssey BGRA/PGRA models with Active Control Engine Mounts (electronic). Check to verify that the rear engine mount has not failed. There must be a minimum clearance of 0.024” (0.610mm) between the rear engine mount’s rubber bumper and the mount bracket. There should be no visible distortion (bulges) seen on the rubber mount.

Honda/Acura2005-06 Odyssey Mistaken TCC Shudder (continued)