15T FRANNA Crane Specification: 15T FRANNA COMPREHENSIVE LIFTING SOLUTIONS We look forward to providing a full heavy lift engineering and crane solution for your next project. Our heavy lift engineers and on site personnel are experienced in managing and organising highly de- manding lift requirements. Contact us to discuss your lifting requirements and a free quote. www.universalcranes.com BRISBANE (HQ) 07 3907 5800 37 Paringa Rd, Murarrie, QLD, 4172 TOWNSVILLE 07 4779 4088 3-9 Horwood St, Currajong, QLD, 4812 SUNSHINE COAST 0409 595 618 562 Maroochydore Rd, Kunda Park, QLD, 4556 BALLINA 02 6686 7748 5 Convair Ave, Ballina, NSW, 2478 ROCKHAMPTON 07 4939 1095 39-42 Johnson St, Park Hurst, QLD, 4702 GLADSTONE 07 4829 5219 7 Morgan St, Gladstone, QLD, 4680 MELBOURNE 03 9585 6114 PO Box 636, Wynnum, QLD, 4178 MINICRANES 07 5457 3727 PO Box 1659, Buderim, QLD, 4556 Any lift, anywhere, any time
17
Embed
15T FRANNA - Universal Cranes...15T FRANNA Crane Specification: 15T FRANNA COMPREHENSIVE LIFTING SOLUTIONS We look forward to providing a full heavy lift engineering and crane solution
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1 5 T F R A N N A
Crane Specification:
15T FRANNA
C O M P R E H E N S I V E L I F T I N G S O L U T I O N S
We look forward to providing a full heavy lift engineering and crane solution for your next project.
Our heavy lift engineers and on site personnel are experienced in managing and organising highly de-manding lift requirements. Contact us to discuss your lifting requirements and a free quote.
Notes to lifting capacity Lifting capacities do not exceed 66.6% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult Rated Capacity Manual for further details.
Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and Rated Capacity Manual both supplied with the crane.
5.66–13.86 m AS 1418.5Pick & Carry 0.4 m/s (1.44 km/h); On rubber 66.6%
LOAD CHARt Fallblock
RC (kg) < than 10º articulation
RC (kg) > than 10º articulation
Boom angle
( ) Radius at 0º boom angle
Loads above red line are structural
At 15-3
9
Notes to lifting capacity Read and understand warning notes before operating crane.
Weight of slings & hook block to be added to load.
Maximum extension length is 17.91m.
17.9 m boom length includes manual 3rd extension.
Ratings for manual extension are structural and based on boom angle, not radius.
The ratings do not change if the power sections are retracted with the manual section extended.
Lifting capacities do not exceed 66.6% of tipping load.
Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings.
Consult Rated Capacity Manual for further details.
Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and Rated Capacity Manual both supplied with the crane.
MaximumRadius
Rated Capacity
Maximum Extension
Maximum Length 17.91 m
m kg
1850
6.72 1850
60º
1600
9.29 1600
50º
1300
11.53 1300
40º
1150
13.35 1150
30º
1050
14.70 1050
20º
1050
15.54 950
10º
1050
15.86 950
0º
9.71–17.91 m AS 1418.5Pick & Carry 0.4 m/s (1.44 km/h); On rubber 66.6%
RC (kg) < than 10º articulation
RC (kg) > than 10º articulation
Boom angle
Loads above red line are structural
LOAD CHARt Fallblock Manual
At 15-3
10
Four section boom: Main boom, two powered sections, and one manual section (3rd section)
Maximum hook height 17 m
Boom elevation angle range (min. / max.) -5° / 60°
Maximum hook height with jib 19.5 m
40º articulation each side of centre providing a total 80º slewing arc 80°
Machinery hook 10 tonne
Winch
Winch: Fully compensated hook height when telescoping boom 1 and 2
Maximum line pull 3.5 tonne
Two speed winch 41 m/min / 58 m/min
Hook block, two or three part, maximum rated capacity 10.5 tonne
Engine and transmission
Mercedes OM 906 EUROMOT 3a turbo charged and intercooled diesel engine 170 kW with hinged engine cover and mid cover for easy serviceability
Engine Torque 810 Nm
Fuel capacity 330 l
Fuel type diesel
Allison 2000 Series 5-speed automatic
Transfer Case: Styer VG 750 2:1 ratio High/low range via airshift 2WD/4WD via airshift, disconnect to rear axle
tECHNICAL DESCRIPtION
Boom and Jib
At 15-3
11
Hydraulic Pump:
Load sensing axial piston
Maximum pump flow rate 125 litre/min
Maximum working pressure 210 bar
Hydraulic tank with remote return filter and in tank suction filters 120 l
Chassis
Front Axle: 6,000 kg Meritor RS-25-160 with driver selectable diff lock
Rear Axle: 10,000 kg Meritor RS-25-160
Total: 16,000 kg
Full power Orbitrol with twin hydraulic double acting rams with end stop cushioning
Priority flow from main pump supply plus electro hydraulic emergency supply
Turning Circle: Outside wheels radius 6.6 m
Brakes: Air operated high capacity S-cam style twin Circuit Service and Spring Applied Park Brake on both front and rear axles
Crane operation hold brake on right side front wheel
Driver selectable engine exhaust brake with electronically controlled transmission downshifts
Suspension: Two semi elliptic springs on front and rear axle plus torsion bar on front axle for stability
tyres
11.00 x 20 bias ply duals
20 in x 7.5 in heavy duty demountable rims
tECHNICAL DESCRIPtIONHydraulic System
At 15-3
12
Maximum rated travel speed 85 kph
Gradeability 50%
Cab, Controls, and Operator aids
Two person, insulated lock up cabin:
KAB suspension driver’s and passenger seats, including retracting seat belts
Colour LCD display
Radio/CD player with Bluetooth handsfree
Reversing camera
Centralised greasing
Cruise control
Engine monitoring
Service diagnostics
3B6 rated capacity indicator with audio/visual overload pre-warning and motion cut-outs
3 axis joystick control for crane functions
Air conditioned and heated
tECHNICAL DESCRIPtIONVehicle performance
At 15-3
13
NOtES
At 15-3
14
NOtES
At 15-3
15
NOtES
At 15-3
16
www.terexcranes.comEffective Date: September 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2011 Terex Corporation..