ModBUS technology for distributed control and data acquisition • Stand alone high performance modules • Inputs for sensors (thermoprobes TC/RTD, load cell), analog and digital signals • Single / Three-phase network analyzer • Ethernet gateways and OPC drivers • Radio transmission modules • RS485 ModBUSRTU interface, up to 1200 mt • IEC 613311 programming system • High level protocol PPP, HTTP, SMTP, FTP, Ethernet, ModBUS TCP, IEC 870 • Automatic data transmission (log, sms, e-mail…) • Multi-function control units (CPU, datalogger, web server, RTU) Z-PC Line
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Modular CPU and multi-functions• PLC, Web Server, RTU, datalogger, Ethernet bridge• ModBUS Master / Slave on RS232/RS485• RS232 interfaces (user free/programming)• Ethernet Port 10Base T opened to supervision networks
and remote connection• RISC / MISC Microprocessor at 32/64 bit• Memories: up to 32 MB RAM, 64 MB flash memory (data)• Backup battery for retentive variables
Digital Output• SPST relay output or MosFET, delay
and fail safe programmable, front dia-gnostics
Special Modules: tempera-ture control, load cells,electric network analyzer
• Direct input from RTD 2, 3 or 4 wires• Thermocouples acquisition J, K, R, S, T, B,
E, N• Electrical measurements acquisition from
net analyzer• Load cell (strain gauge) acquisition
Communication Interfaces• Radio modules with short range 100 kbps , 10
mW, 434-869 MHz• RS232-USB/RS485 serial Conversion Modules
Max 32 I/O modules, 1.200 m without repeater
Max 32 I/O modules, 1.200 m without repeater
RS232 / RS485ModBUS RTU - RS485
Z-TWS
LAN /
WAN /
Internet
Ethernet - ModBUS TCP
Distributed system, supervisory and control integration