FLOATING SUCTION ARMS NOMINAL BORE 1” TO 30” Rotaflow FV Limited Rotec House, Bingswood Trading Estate, Whaley Bridge, High Peak, SK23 7LY www.rotaflow.com tel:+44(0)1663 735003 fax:+44(0)1663 735006 email:[email protected] Registered in England No. 1851533 VAT No. 373 4375 40 Tech Spec: 152/161026 Page 1 of 1 Floating Suction Arm for Storage Tank Facilities. • Either fully floating system (as shown) or suspended from a floating roof application via an ‘I’ beam trolley system. • Dual stage scissor action configuration can be designed for tall tank applications. • Simple assembly in tank where access is limited. • Fully earth bonded. • Inspection lifting cable can be supplied. • Self contained restraining cable can be fitted where required. • Carbon Steel or Stainless Steel construction. • Pivoting float system to maintain an even outlet/suction depth, coupled with offset side fluid flows to reduce vortexing and lifting thrust when filling. • Elbow or Bell Mouth intake fitted if preferred with anti vortex plate. • Stainless Steel float as standard. • Trestle stand or foot arrangement to keep intake/discharge from bottom of tank. • Vacuum breaker/bleed path incorporated. • Incorporating Rotaflow proven and robust double roller, PTFE sealed swivel joints modified for submerged duty. See ‘SK series’ and ‘large bore’ swivel joint pages for details. Lower Level Upper Level Please contact Rotaflow to discuss your application. Copyright © 2016 Rotaflow FV LTD
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FLOATING SUCTION ARMS NOMINAL BORE 1” TO 30”
Rotaflow FV Limited Rotec House, Bingswood Trading Estate, Whaley Bridge, High Peak, SK23 7LY www.rotaflow.com tel:+44(0)1663 735003 fax:+44(0)1663 735006 email:[email protected]
Registered in England No. 1851533 VAT No. 373 4375 40
Tech Spec: 152/161026 Page 1 of 1
Floating Suction Arm for Storage Tank Facilities.
• Either fully floating system (as shown) or suspended from a floating roof application via an ‘I’ beam trolley system.
• Dual s tage sc issor act ion configuration can be designed for tall tank applications.
• Simple assembly in tank where access is limited.
• Fully earth bonded.
• Inspection lifting cable can be supplied.
• Self contained restraining cable can be fitted where required.
• Carbon Steel or Stainless Steel construction.
• Pivoting float system to maintain an even outlet/suction depth, coupled with offset side fluid flows to reduce vortexing and lifting thrust when filling.
• Elbow or Bell Mouth intake fitted if preferred with anti vortex plate.
• Stainless Steel float as standard.
• Trestle stand or foot arrangement to keep intake/discharge from bottom of tank.
• Vacuum breaker/bleed path incorporated.
• Incorporating Rotaflow proven and robust double roller, PTFE sealed swivel joints modif ied for submerged duty. See ‘SK series’ and ‘large bore’ swivel joint pages for details.
Lower Level
Upper Level
Please contact Rotaflow to discuss your application. Copyright © 2016 Rotaflow FV LTD
Related Documents
