1. Measure drawer opening. I-TRIMWDI-1115 2. Measure insert and mark cutting line. 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 TRIMMABLE WOOD DRAWER INSERT TOOLS REQUIRED: 15 MIN ESTIMATED ASSEMBLY TIME: CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. 3. Cut width of insert to fit inside of drawer. Cut back of insert to fit from inside front to rear of the drawer. 4. Simply drop in drawer. See next page for special cutting instructions NOTE: It's recommended you use a Finishing Saw Blade on our maple and walnut finishes in order to minimize the risk of harming the finish.
4
Embed
15 MIN - rev-a-shelf.com · PDF fileCut back of insert to fit from inside front to rear of the drawer. When cutting to size, remember your drawer box wall can be used as a sidewall
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1. Measure drawer opening.
I-TRIMWDI-1115
2. Measure insert and mark cuttingline.
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126
TRIMMABLE WOOD DRAWER INSERT
TOOLS REQUIRED:
15 MINESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and wipe parts dry.
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
3. �Cut�width�of�insert�to�fit�inside�of drawer. Cut back of insert to�fit�from�inside�front�to�rear�of the drawer.
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
4. Simply drop in drawer.
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
See next page for special cutting instructions
NOTE: It's recommended you use a Finishing Saw Blade on our maple and walnut finishes in order to minimize the risk of harming the finish.
Cutting Instructions
Recommended Cutting Lines
4WCT/4WUT/4SDICut width of insert to fit inside of drawer. Cut back of insert to fit from inside front to rear of the drawer.When cutting to size, remember your drawer box wall can be used as a sidewall for your organizer.
4WKBFlip board over and remove any screws that would be in the way of the cutting path.
The 4WKB-1 Knife Block is designed to be trimmed in order to fit into most drawers.
1. Measure drawer opening.
12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 | rev-a-shelf.com
I-4WKB-0415
4WKB-1 WOOD KNIFE BLOCK
INSTALLATION INSTRUCTIONS
2. Measure the knife block to see where you will need to trim.
3. Flip board over and remove any screws that would be in the way of the cutting path.
Note: Divider can be removed and trimmed to proper height.
4. Simply drop in drawer.
Table saw recommended.
4SDI4WCT 4WUT
4WKB-1
4CDI-24KCUP-1
4CDI-KCUP
4CDI-18KCUP-1
4WDKB-1
Recommended Cutting Lines
For ease of cutting we recommend cutting through knife slots.
1. Mida la apertura del cajón.Mida la apertura del cajón.
I-TRIMWDI-1115
2. Mida el inserto y marque la línea de corte.Vea la siguiente página para instruccionesespeciales de corte.
Mesurez le diviseur et marquez la ligne de coupe. Voir la page suivante pour les instructions spécifiques pour couper.
Inserto para cajón de madera recortableDiviseur recoupable en bois pour tiroir
15 MIN
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
3.Corte el ancho del inserto para quesea colocado dentro del cajón. Corte la parte posterior del inserto para que sea colocado adecuadamente desde la parte interior frontal hacia la parte posterior del cajón.
Coupez la largeur du diviseur pour qu’il s’adapte à l’intérieur du tiroir. Coupez l’arrière du diviseur pour qu’il s’adapte entre l’avant à l’intérieur du tiroir et l’arrière du tiroir.
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
4. Coloque en el cajón.Déposez dans le tiroir.
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
14
18
116
38
332
764
#2 #1 516
58
12
38
2” 1” 90˚
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126
INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION
Herramientas requeridas:Outils Requis:
Tiempo estimado de ensambladoDurée de l’installation:
Cuidado/ Entretien:
Limpie con un paño húmedo y seque las partes.
Nettoyer avec un chiffon humide et essuyer pour sécher complètement.
NOTE: It's recommended you use a Finishing Saw Blade on our maple and walnut finishes in order to minimize the risk of harming the finish. (Translations needed)
Instrucciones para CortarInstructions pour Couper
4WCT/4WUT/4SDICorte el ancho del inserto para que sea colocado dentro del cajón. Corte la parte posterior del inserto para que sea colocado adecuadamente desde la parte interior frontal hacia la parte posterior del cajón. Cuando corte para ajustar a la medida, recuerde que la pared del cajón de la caja puede ser usada como una pared lateral para su organizador.
Coupez la largeur du diviseur pour qu’il s’adapte à l’intérieur du tiroir. Coupez l’arrière du diviseur pour qu’il s’adapte entre l’avant à l’intérieur du tiroir et l’arrière du tiroir. Quand vous coupez pour avoir la bonne taille, rappelez-vous que la paroi de votre boîte de tiroir peut être utilisée comme une paroi latérale pour votre organisateur.
4WKBVoltee la tabla y quite todos los tornillos que puedan estar en el paso del área para cortar.Retournez le panneau et retirez toutes les vis qui seraient dans le chemin de la trajectoire de coupe.
The 4WKB-1 Knife Block is designed to be trimmed in order to fit into most drawers.
1. Measure drawer opening.
12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 | rev-a-shelf.com
I-4WKB-0415
4WKB-1 WOOD KNIFE BLOCK
INSTALLATION INSTRUCTIONS
2. Measure the knife block to see where you will need to trim.
3. Flip board over and remove any screws that would be in the way of the cutting path.
Note: Divider can be removed and trimmed to proper height.
4. Simply drop in drawer.
Table saw recommended.
4SDI4WCT 4WUT
4WKB-1
4CDI-24KCUP-1
4CDI-KCUP
4CDI-18KCUP-1
4WDKB-1
Líneas recomendadas para cortarLignes de coupe conseillées
Para un corte cómodo, le recomendamos cortar a través de las ranuras de la navaja. Pour faciliter la coupe, nous recommandons de couper à travers les fentes pour les couteaux.
Líneas recomendadas para cortarLignes de coupe conseillées