1456 www.hettich.com
1457Technik für Möbel
Runners for wooden drawers Drawer runners Quadro Summary 1458 - 1459
Runners for wooden drawers Ball-bearing runners KA Summary 1498 - 1499
Runners for wooden drawers Roller runners FR Summary 1524 - 1525
Runners for wooden drawers Office organisation at the desk Over extension runners Quadro Mini Duplex Summary 1790 - 1791
Runners for wooden drawers Office organisation at the desk Ball-bearing runner KA 5632 Summary 1790 - 1791
Drawer runners for special solutions Differential full extension 2523 Quadro Big Duplex 2524 - 2525
Drawer runnersSummary of ranges
1458 www.hettich.com
Strong precision technology and outstanding running action: Quadro.
Installing wooden drawers couldn‘t be easier: slide-on and plug-on principle.
Quadro for all demands: partial or full extension, with self-closing function, Silent System or Push to open, wide choice of design lengths and weight categories.
Even extremely heavy drawers close quietly and gently – thanks to the integrated Silent System.
Push to open: for drawers that glide out automatically. The per-fect solution for handleless fronts.
Drawer runners Quadro guarantee the ultimate in drawer convenience. With attractive design from concealed instal-lation. With a long life and unceasing top performance. The robust, resilient tracks provide the steel balls with optimum control - for perfect vertical and lateral stability.
Optional Silent System soft-closing gently shuts drawers in complete silence. The Push to open function automatically opens the drawer in response to a light press on the front - for handleless fronts.
Runners for wooden drawersDrawer runners Quadro
1459Technik für Möbel
Partial extension runners Quadro 25 for slide-on assembly Range summary / Technical comparison 1460
Full extension runners Quadro V6 / V6+ for slide-on assembly Range summary / Technical comparison 1461 - 1462
Partial extension runners Quadro 25 for plug-on assembly Range summary / Technical comparison 1462 - 1463
Quadro with under-base mounting Range summary / Technical comparison 1463
Partial extension runner Quadro 40, for sliding panels 1490
Accessories Range summary / Technical comparison 1463
Technical Information 1494 - 1496 Quality criteria 1539
Assembly aids 2681
Runners for wooden drawersDrawer runners QuadroSummary
1460 www.hettich.com
Quadro 25 with Stop Control
Page 1464 - 1465
Loading capacity 25 kg
Drawer lengths 250 - 650 mm
Description Partial extension runner with integrated self-closing function
Installation On carcase side Slide-on assembly
Quadro 25 with Silent System
1466 - 1467
25 kg
250 - 550 mm
Partial extension runner with integrated soft-closing function
On carcase side Slide-on assembly
Quadro 25 with Push to open
1468 - 1469
25 kg
250 - 550 mm
Partial extension runner with integrated opening system
On carcase side Slide-on assembly
Runners for wooden drawersDrawer runners QuadroRange summary / Technical comparison
1461Technik für Möbel
Quadro V6 with Stop Control
1470 - 1471
30 kg
280 - 600 mm
Full extension with integrated self-closing function
On carcase side Slide-on assembly
Quadro V6 with Silent System
1472 - 1473
30 kg
250 - 600 mm
Full extension runner with inte-grated soft-closing function
On carcase side Slide-on assembly
Quadro V6 with Push to open
1474 - 1475
30 kg
250 - 550 mm
Full extension runner with inte-grated opening system
On carcase side Slide-on assembly
Quadro V6+ with Silent System
1476 - 1477
50 kg
350 - 600 mm
Full extension runner with inte-grated soft-closing function
On carcase side Slide-on assembly
Runners for wooden drawersDrawer runners QuadroRange summary / Technical comparison
1462 www.hettich.com
Quadro V6+ with Push to open
Page 1478 - 1479
Loading capacity 50 kg
Drawer lengths 350 - 600 mm
Description Full extension runner with inte-grated opening system
Installation On carcase side Slide-on assembly
Quadro 25 with Stop Control
1480 - 1481
25 kg
250 - 550 mm
Partial extension runner with integrated self-closing function
On carcase side Plug-on assembly
Quadro 25 with Silent System
1482 - 1483
25 kg
250 - 550 mm
Partial extension runner with integrated soft-closing function
On carcase side Plug-on assembly
Runners for wooden drawersDrawer runners QuadroRange summary / Technical comparison
1463Technik für Möbel
Quadro 25 with Push to open
1484 - 1485
25 kg
250 - 550 mm
Partial extension runner with integrated opening system
On carcase side Plug-on assembly
Quadro V6 BM with Silent System
1486 - 1487
30 kg
350 - 500 mm
Full extension runner with inte-grated soft-close feature
On carcase bottom panel Slide-on assembly
Quadro 40 BM
1488 - 1489
40 kg
270 - 680 mm
Partial extension runner
On carcase bottom panel Plug-on assembly
Accessories
1491 - 1493
Buffer / catch for wooden drawers / pull-out shelves / mounting plug / lift-off guard / front adjuster / screws
Runners for wooden drawersDrawer runners QuadroRange summary / Technical comparison
1464 www.hettich.com
Stop Control - integrated self-closing mechanism for automatic closure Convenient slide-on assembly with catches and
toolless vertical adjustment. Flexible interchangeable system - from Quadro partial to full extension
runner without altering carcase, drawer and front-panel dimensions Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Stop ControlNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm Hole spacing b1 mm Order no.
1 pair 15 pairs
250 263 50 160 0 072 904 9 080 260
280 293 50 160 0 048 901 9 080 261
300 313 50 160 0 072 905 9 080 262
320 333 62 192 0 048 902 9 080 263
350 363 62 192 0 073 210 9 080 264
380 393 62 224 0 048 903 9 080 265
400 413 74 224 0 073 211 9 080 266
420 433 74 224 0 033 686 9 080 267
450 463 86 256 0 073 212 9 080 268
480 493 86 256 0 047 481 9 080 269
500 513 98 288 0 033 687 9 080 270
520 533 98 288 0 047 482 9 080 271
550 563 98 320 0 073 214 9 080 272
580 593 110 352 0 048 904 9 080 273
600 613 110 352 0 073 215 9 080 274
650 663 134 352 0 073 216 9 080 275
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Drawer runnerPartial extension runner Quadro 25 with Stop ControlLoading capacity 25 kg
1465Technik für Möbel
HettCAD
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
9,5
29
ø 67
12
20
12-13
11
30
5
≤ 16 8
8
20 26,5ø 4 ø 6,3
4864
9
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
20
Planning dimensions
Planning dimensions
329
ø
16
37
932
12
10 ø 6NL
11
≥ KT
ø 4 ø 6,3
ELb1
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers. = minimum number of screw-fixing positions
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Stop ControlLoading capacity 25 kg
1466 www.hettich.com
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Convenient slide-on assembly with catches and toolless vertical adjustment.
Flexible interchangeable system - from Quadro partial to full extension runner without altering carcase, drawer and front-panel dimensions
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Silent SystemNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm Hole spacing b1 mm Order no.
1 pair 15 pairs
250 263 50 160 9 135 931 9 135 944
280 293 50 160 9 135 932 9 135 945
300 313 50 160 9 135 933 9 135 946
320 333 62 192 9 135 934 9 135 947
350 363 62 192 9 135 935 9 135 948
380 393 62 224 9 135 936 9 135 949
400 413 74 224 9 135 937 9 135 950
420 433 74 224 9 135 938 9 135 951
450 463 86 256 9 135 939 9 135 952
480 493 86 256 9 135 940 9 135 953
500 513 98 288 9 135 941 9 135 954
520 533 98 288 9 135 942 9 135 955
550 563 98 320 9 135 943 9 135 956
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base For safely connecting the Quadro runner and wooden drawer without
the aid of tools Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Drawer runnerPartial extension runner Quadro 25 with Silent SystemLoading capacity 25 kg
1467Technik für Möbel
HettCAD
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
11
30
9,5
29
ø 67
12
-
13
12
5
ø 4 ø 6,3
20
≤ 16 8
8
20 26,5
ø 3,5 x 16
4864
9
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
20
Planning dimensions
Planning dimensions
1637
329
12
10ø
6
11
329
NL
≥ KT
ø 4 ø 6,3
b1EL
= minimum number of screw-fixing positions
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Silent SystemLoading capacity 25 kg
1468 www.hettich.com
Push to open - the precision Push to open mechanism automatically opens the drawer in virtual silence - a light press is all it takes!
Convenient slide-on assembly with catches and toolless vertical adjustment.
Flexible interchangeable system - from Quadro partial to full extension runner without altering carcase, drawer and front-panel dimensions
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Push to openNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm Hole spacing b1 mm Order no.
1 pair 12 pairs
250 263 50 160 9 135 957 9 111 245
300 313 50 160 9 135 958 9 111 246
320 333 62 192 9 135 959 9 111 247
350 363 62 192 9 135 960 9 111 248
380 393 62 224 9 135 961 9 111 249
400 413 74 224 9 135 962 9 111 250
420 433 74 224 9 135 963 9 135 969
450 463 86 256 9 135 964 9 111 251
480 493 86 256 9 135 965 9 135 970
500 513 98 288 9 135 966 9 111 252
520 533 98 288 9 135 967 9 111 253
550 563 98 320 9 135 968 9 111 254
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
Drawer runnerPartial extension runner Quadro 25 with Push to openLoading capacity 25 kg
1469Technik für Möbel
HettCAD
9,5
29
ø 67
12
20
12-13
11
30
5
≤ 16 8
8
20 26,5ø 4 ø 6,3
4864
9
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
20
Planning dimensions
Planning dimensions
1637
329
12
10ø
6
11
329
NL
≥ KT
ø 4 ø 6,3
b1EL
= minimum number of screw-fixing positions
Stated dimensions are based on a 4 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Push to openLoading capacity 25 kg
1470 www.hettich.com
Stop Control - integrated self-closing mechanism for automatic closure Convenient slide-on assembly with catches and toolless vertical
adjustment. Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6 with Stop ControlNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm Hole spacing b2 mm Order no.
1 pair 15 pairs
280 293 160 0 072 164 9 080 246
300 313 192 0 072 172 9 080 247
320 333 192 0 072 165 9 080 248
350 363 192 0 072 173 9 080 249
380 393 224 0 072 166 9 080 250
400 413 224 0 072 174 9 080 251
420 433 224 0 072 167 9 080 252
450 463 256 0 072 175 9 080 253
480 493 256 0 072 168 9 080 254
500 513 288 224 0 072 176 9 080 255
520 533 288 224 0 072 169 9 080 256
550 563 288 224 0 072 177 9 080 257
580 593 352 0 072 170 9 080 258
600 613 352 0 072 178 9 080 259
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Drawer runnerFull extension runner Quadro V6 with Stop ControlLoading capacity 30 kg
1471Technik für Möbel
HettCAD
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
9,512
37 12
- 13
11
30
7ø 6
≤ 16ø 4 ø 6,3
20
8
8
20 26,5
ø 3,5 x 16
≤ 16
4864
9
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
20
Planning dimensions
Planning dimensions
37
9 32932
12
NL
≥ KT
9
10ø 6
11
ø 4 ø 6,3
b1b2
= minimum number of screw-fixing positions
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6 with Stop ControlLoading capacity 30 kg
1472 www.hettich.com
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Convenient slide-on assembly with catches and toolless vertical adjustment.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6 with Silent SystemNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm Hole spacing b2 mm Order no.
1 pair 10 pairs
250 263 142 9 135 983 9 117 491
280 293 160 0 045 284 9 080 224
300 313 192 0 045 285 9 080 225
320 333 192 0 045 286 9 080 226
350 363 192 0 045 287 9 080 231
380 393 224 0 045 288 9 080 232
400 413 224 0 045 289 9 080 233
420 433 224 0 045 290 9 080 234
450 463 256 0 045 291 9 080 235
480 493 256 0 045 292 9 080 236
500 513 288 224 0 045 293 9 080 237
520 533 288 224 0 045 294 9 080 238
550 563 288 224 0 045 295 9 080 239
580 593 352 0 045 296 9 080 240
600 613 352 0 045 297 9 080 241
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base For safely connecting the Quadro runner and wooden drawer without
the aid of tools Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Drawer runnerFull extension runner Quadro V6 with Silent SystemLoading capacity 30 kg
1473Technik für Möbel
HettCAD
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
9,512
37 12 - 13
11
30
7ø 6
≤ 16ø 4 ø 6,3
2048
649
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
8
8
20 26,5
20
Planning dimensions
Planning dimensions
37
9 32932
12
NL
≥ KT
9
10ø 6
11
ø 4 ø 6,3
b1b2
= minimum number of screw-fixing positions
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6 with Silent SystemLoading capacity 30 kg
1474 www.hettich.com
Push to open - the precision Push to open mechanism automatically opens the drawer in virtual silence - a light press is all it takes!
Convenient slide-on assembly with catches and toolless vertical adjustment.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6 with Push to openNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm Hole spacing b2 mm Order no.
1 pair 10 pairs
250 263 142 9 135 984 9 111 235
300 313 192 9 135 985 9 111 236
320 333 192 9 135 986 9 111 237
350 363 192 9 135 987 9 111 238
380 393 224 9 135 988 9 111 239
400 413 224 9 135 989 9 111 240
420 433 256 9 135 990 9 135 996
450 463 256 9 135 991 9 111 241
480 493 256 9 135 992 9 135 997
500 513 288 224 9 135 993 9 111 242
520 533 288 224 9 135 994 9 111 243
550 563 288 224 9 135 995 9 111 244
Using the mounting plug reduces drawer length (NL) by 10 mm
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
Drawer runnerFull extension runner Quadro V6 with Push to openLoading capacity 30 kg
1475Technik für Möbel
HettCAD
9,512
37 12 - 13
11
30
7ø 6
≤ 16ø 4 ø 6,3
2048
649
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
8
8
20 26,5
20
Planning dimensions
Planning dimensions
37
9 32932
12
NL
≥ KT
9
10ø 6
11
ø 4 ø 6,3
b1b2
= minimum number of screw-fixing positions
Stated dimensions are based on a 4 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6 with Push to openLoading capacity 30 kg
1476 www.hettich.com
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Convenient slide-on assembly with catches and toolless vertical adjustment.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6+ with Silent SystemNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Order no.
1 pair 4 pairs 8 pairs
350 363 192 21 9 135 998 9 117 625
380 393 224 19 9 135 999 9 117 626
400 413 224 32 9 136 000 9 117 630
420 433 224 32 9 136 001 9 117 661
450 463 256 32 9 136 002 9 117 662
480 493 256 32 9 136 003 9 117 663
500 513 288 64 9 136 004 9 117 664
520 533 288 64 9 136 005 9 117 665
550 563 288 64 9 136 006 9 117 666
580 593 352 64 9 136 007 9 117 667
600 613 352 64 9 136 008 9 117 668
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Catch, Quadro V6+ EB20, left 9 117 483 100 ea.
Catch, Quadro V6+ EB20, right 9 117 485 100 ea.
Pair, left / right 9 117 492 1/5 pair
Drawer runnerFull extension runner Quadro V6+ with Silent SystemLoading capacity 50 kg
1477Technik für Möbel
HettCAD
17 12
20
12-13
11
≤ 16 7
ø 6
30
ø 4 ø 6,3
4864
10
80
ø 3,5 x 2042
9,5
20
≤ 16
Planning dimensions
Planning dimensions
10ø 6
11
37
329 9
17
32
12
b1 b2
ø 4 ø 6,3
NL
≥ KT
= minimum number of screw-fixing positions
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6+ with Silent SystemLoading capacity 50 kg
1478 www.hettich.com
Push to open - the precision Push to open mechanism automatically opens the drawer in virtual silence - a light press is all it takes!
Convenient slide-on assembly with catches and toolless vertical adjustment.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6+ with Push to openNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Order no.
1 pair 4 pairs 8 pairs
350 363 192 21 9 136 009 9 130 702
380 393 224 19 9 136 010 9 130 703
400 413 224 32 9 136 011 9 130 704
420 433 224 32 9 136 012 9 136 020
450 463 256 32 9 136 013 9 130 705
480 493 256 32 9 136 014 9 136 021
500 513 288 64 9 136 015 9 130 706
520 533 288 64 9 136 016 9 130 707
550 563 288 64 9 136 017 9 130 708
580 593 352 64 9 136 018 9 130 709
600 613 352 64 9 136 019 9 130 710
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Catch, Quadro V6+ EB20, left 9 117 483 100 ea.
Catch, Quadro V6+ EB20, right 9 117 485 100 ea.
Pair, left / right 9 117 492 1/5 pair
Drawer runnerFull extension runner Quadro V6+ with Push to openLoading capacity 50 kg
1479Technik für Möbel
HettCAD
17 12
20
12-13
11
≤ 16 7
ø 6
30
ø 4 ø 6,3
4864
10
80
ø 3,5 x 2042
9,5
20
≤ 16
Planning dimensions
Planning dimensions
10ø 6
11
37
329 9
17
32
12
b1 b2
ø 4 ø 6,3
NL
≥ KT
= minimum number of screw-fixing positions
Stated dimensions are based on a 4 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6+ with Push to openLoading capacity 50 kg
1480 www.hettich.com
Stop Control - integrated self-closing mechanism for automatic closure Simple plug-on assembly with height adjustment without requiring
tools Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Stop ControlNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing, dimension C mm
Hole spacing, dimension D mm
Order no.
1 pair 15 pairs
250 263 50 160 188.5 61.5 9 135 843 0 072 154
300 313 50 160 188.5 111.5 9 135 844 0 046 364
320 333 62 192 221.5 98.5 9 135 845 9 135 863
350 363 62 192 221.5 128.5 9 135 846 0 046 365
380 393 62 224 249.5 130.5 9 135 847 9 135 864
400 413 74 224 249.5 150.5 9 135 865 0 046 366
420 433 74 224 283.5 136.5 9 135 848 9 135 866
450 463 86 256 283.5 166.5 9 135 867 0 046 367
480 493 86 256 309.5 170.5 9 135 849 9 135 868
500 513 98 288 309.5 190.5 9 135 850 0 046 368
520 533 98 288 338.5 181.5 9 135 861 9 135 869
550 563 98 320 338.5 211.5 9 135 862 0 046 369
Using the mounting plug reduces drawer length (NL) by 10 mm.
Lift-off guard for wooden drawers with plug-on assembly
Wooden drawers for plug-on assembly can additionally be secured using the optional lift-off guard
Plastic, grey
Order no. PU
9 105 699 1/200 ea.
Mounting plug
For drawers with flush bottom and pull-out shelves Plastic, grey
Article Colour Order no. PU
Front Beige 0 047 216 1/200 ea.
Rear White 0 073 213 1/200 ea.
Drawer runnerPartial extension runner Quadro 25 with Stop ControlLoading capacity 25 kg
1481Technik für Möbel
HettCAD
10
≤ 16 ø 6
9,5
ø 6
7 8
8
6
20 26,5
ø 6
29
30
10
11
ø 6 x 10
12
10
13
≤ 16
5
(C)
20 20
ø 4 ø 6,3
(C)
D D
Flush bottom panelGrooved bottom panel
Planning dimensions
Planning dimensions
1637
329
12
329
10ø 6
11
EL
NL
≥ KT
(C)
b1
D
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers. = minimum number of screw-fixing positions
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Stop ControlLoading capacity 25 kg
1482 www.hettich.com
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Simple plug-on assembly with height adjustment without requiring tools
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Silent SystemNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing, dimension C mm
Hole spacing, dimension D mm
Order no.
1 pair 15 pairs
250 263 50 160 188,5 61,5 9 135 870 9 135 882
300 313 50 160 188,5 111,5 9 135 871 9 135 883
320 333 62 192 221,5 98,5 9 135 872 9 135 884
350 363 62 192 221,5 128,5 9 135 873 9 135 885
380 393 62 224 249,5 130,5 9 135 874 9 135 886
400 413 74 224 249,5 150,5 9 135 875 9 135 887
420 433 74 224 283,5 136,5 9 135 876 9 135 888
450 463 86 256 283,5 166,5 9 135 877 9 135 889
480 493 86 256 309,5 170,5 9 135 878 9 135 890
500 513 98 288 309,5 190,5 9 135 879 9 135 891
520 533 98 288 338,5 181,5 9 135 880 9 135 892
550 563 98 320 338,5 211,5 9 135 881 9 135 893
Using the mounting plug reduces drawer length (NL) by 10 mm.
Lift-off guard for wooden drawers with plug-on assembly
Wooden drawers for plug-on assembly can additionally be secured using the optional lift-off guard
Plastic, grey
Order no. PU
9 105 699 1/200 ea.
Mounting plug
For drawers with flush bottom and pull-out shelves Plastic, grey
Article Colour Order no. PU
Front Beige 0 047 216 1/200 ea.
Rear White 0 073 213 1/200 ea.
Drawer runnerPartial extension runner Quadro 25 with Silent SystemLoading capacity 25 kg
1483Technik für Möbel
HettCAD
10
≤ 16 ø 6
9,5
ø 6
7 8
8
6
20 26,5
ø 6
29
30
10
11
ø 6 x 10
12
10
13
≤ 16
5
(C)
20 20
ø 4 ø 6,3
(C)
D D
Flush bottom panelGrooved bottom panel
Planning dimensions
Planning dimensions
1637
329
12
10ø 6
11
329
NL ø 4 ø 6,3
b1
≥ KT
(C)
EL
D
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers. = minimum number of screw-fixing positions
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Silent SystemLoading capacity 25 kg
1484 www.hettich.com
Push to open - the precision Push to open mechanism automatically opens the drawer in virtual silence - a light press is all it takes!
Simple plug-on assembly with height adjustment without requiring tools
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 25 with Push to openNominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing, dimension C mm
Hole spacing, dimension D mm
Order no.
1 pair 12 pairs
250 263 50 160 188.5 61.5 9 135 894 9 135 906
300 313 50 160 188.5 111.5 9 135 895 9 135 907
320 333 62 192 221.5 98.5 9 135 896 9 135 908
350 363 62 192 221.5 128.5 9 135 897 9 135 909
380 393 62 224 249.5 130.5 9 135 898 9 135 910
400 413 74 224 249.5 150.5 9 135 899 9 135 911
420 433 74 224 283.5 136.5 9 135 900 9 135 912
450 463 86 256 283.5 166.5 9 135 901 9 135 913
480 493 86 256 309.5 170.5 9 135 902 9 135 914
500 513 98 288 309.5 190.5 9 135 903 9 135 915
520 533 98 288 338.5 181.5 9 135 904 9 135 916
550 563 98 320 338.5 211.5 9 135 905 9 135 917
Using the mounting plug reduces drawer length (NL) by 10 mm.
Lift-off guard for wooden drawers with plug-on assembly
Wooden drawers for plug-on assembly can additionally be secured using the optional lift-off guard
Plastic, grey
Order no. PU
9 105 699 1/200 ea.
Mounting plug
For drawers with flush bottom and pull-out shelves Plastic, grey
Article Colour Order no. PU
Front Beige 0 047 216 1/200 ea.
Rear White 0 073 213 1/200 ea.
Drawer runnerPartial extension runner Quadro 25 with Push to openLoading capacity 25 kg
1485Technik für Möbel
HettCAD
10
≤ 16 ø 6
9,5
ø 6
7 8
8
6
20 26,5
ø 6
29
30
10
11
ø 6 x 10
12
10
13
≤ 16
5
(C)
20 20
ø 4 ø 6,3
(C)
D D
Flush bottom panelGrooved bottom panel
Planning dimensions
Planning dimensions
1637
329
12
10ø 6
11
329
NL ø 4 ø 6,3
b1
≥ KT
(C)
EL
D
Stated dimensions are based on a 4 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers. = minimum number of screw-fixing positions
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 25 with Push to openLoading capacity 25 kg
1486 www.hettich.com
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Convenient slide-on assembly with catches and toolless vertical adjustment.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro V6 BM with Silent SystemNominal length / Drawer length NL mm
Minimum carcase depth KT mm Hole spacing b1 mm Order no. PU
350 363 256 9 079 486 1 pair
400 413 288 9 079 523 1 pair
450 463 256 9 079 437 1 pair
500 513 256 9 079 454 1 pair
Using the mounting plug reduces drawer length (NL) by 10 mm.
Catch for wooden drawers with grooved base
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Pair, left / right 9 144 597 1/5 pair
Catch for pull-out shelves / wooden drawers with flush base
For securely connecting Quadro runner and pull-out shelf / wooden drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
Drawer runnerFull extension runner Quadro V6 for under-base mounting with Silent SystemLoading capacity 30 kg
1487Technik für Möbel
HettCAD
7
12-13
22,5
7ø 6
24
11
3020
8
8
20 26,5
20
≤ 16
4864
9
10
80
ø 3,5 x 16
≤ 16
6
32
7
26,520
3748
ø 8 x 13
10
12
6
10
7,5
ø 4 x 16
28
Planning dimensions
Planning dimensions
37
9 9 9 9
10 ø 6
11
NL
≥ KT
ø 4
b1
Stated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1494 - 1496Accessories, see pages 1491 - 1493
Drawer runnerFull extension runner Quadro V6 for under-base mounting with Silent SystemLoading capacity 30 kg
1488 www.hettich.com
Simple plug-on assembly and toolless vertical adjustment by means of thumbwheel at the locating pin.
Loading capacity to EN 15338, Level 3 Galvanised steel
Quadro 40Nominal length / Drawer length NL mm
Minimum carcase depth mm
Extension loss EL mm Hole spacing b1 mm Hole spacing C mm Order no. PU
270 - 395 283 - 408 75 192 249.5 0 066 079 1 pair
330 - 490 343 - 503 99 256 309.5 0 066 075 1 pair
455 - 680 468 - 693 147 384 430 0 066 065 1 pair
Using the mounting plug reduces drawer length (NL) by 10 mm.
Lift-off guard for wooden drawers with plug-on assembly
Wooden drawers for plug-on assembly can additionally be secured using the optional lift-off guard
Plastic, grey
Order no. PU
9 105 699 1/200 ea.
Mounting plug
For drawers with flush bottom and pull-out shelves Plastic, grey
Article Colour Order no. PU
Front Beige 0 047 216 1/200 ea.
Rear White 0 073 213 1/200 ea.
Drawer runnerPartial extension runner Quadro 40 for under-base mountingLoading capacity 40 kg
1489Technik für Möbel
HettCAD
8
27,5
47
20 26,5
ø 6
7
27,516
1019,5
11
ø 6
47
12
6
ø 6
ø 6 x 10
10
10
13
≤ 16
≤ 16
C C
ø 4 x 16
Planning dimensions
Planning dimensions
37
32
C
b1
32
16EL
10 ø 6
11
NL
D
ø 4
≥ KTStated dimensions are based on a 1.5 mm gap between front panels. Carcase drilling pattern must allow for thicker front-panel buffers.
Technical Information, see pages 1495Accessories, see pages 1491 - 1493
Drawer runnerPartial extension runner Quadro 40 for under-base mountingLoading capacity 40 kg
1490 www.hettich.com
HettCAD
Partial extension runner Quadro 40, loading capacity 40 kg
For pull-out panels, sample walls and displays which are vertically mounted between two Drawer runners Quadro
Integrated pull-out stop Galvanised steel
Set comprises: 2 drawer runners
Order no. PU
0 028 155 1 set
Planning dimensions
28
250
M4 M 4
260
25010
685
520165
189
99 90
128 128 128
Sliding panel ≤
Extension ≤
Extension loss ≥
Sliding panel ≥
Shortening≤Extension loss
Assembly note
The extension loss of 189 mmcan be reduced by 90 mm if thesliding panel is shortened by thisamount at the back.The maximum installation depthis 595 mm in this case.Use M 4 screws to fasten thesliding panel to the Quadrorunners.
Planning dimensions
48
32
18,75 147
14,5 + 0,3
18,75 147
14,5 + 0,3
H
ø 4 x 16
M 4
Drawer runnerPartial extension runner Quadro 40 for sliding panelsLoading capacity 40 kg
1491Technik für Möbel
Press-in buffer
For hole ø 5 x 5.5 mm Transparent plastic
Order no. PU
9 079 298 1/1000 ea.
ø 8
1,5
ø 5
5,5
Press-in buffer
For hole ø 6 x 7 mm Plastic
Colour Order no. PU
Brown 0 021 154 1/1000 ea.
White 0 025 048 1/1000 ea.
Beige 0 047 353 1/1000 ea.
ø 8
1,5
ø 6
7
Stick-on buffer
Self-adhesive Transparent plastic
Order no. PU
0 072 120 50 ea.
0 046 695 1000 ea.
1,7
ø 8
Drawer runnerQuadroAccessories
1492 www.hettich.com
HettCAD
Catch for wooden drawers with grooved base
For Quadro 25 partial extension runner and Quadro V6 full extension runner
For safely connecting the Quadro runner and wooden drawer without the aid of tools
Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Pair, left / right 9 144 597 1/5 pair
Left catch 9 144 830 100 ea.
Right catch 9 144 841 100 ea.
Catch for wooden drawers with grooved base For Quadro V6+ full extension runner For safely connecting the Quadro runner and wooden drawer without
the aid of tools Infinite height adjustment up to + 2 mm via a knurled wheel Black plastic
Article Order no. PU
Pair, left / right 9 117 492 1/5 pair
Catch, Quadro V6+ EB20, left 9 117 483 100 ea.
Catch, Quadro V6+ EB20, right 9 117 485 100 ea.
Catch for pull-out shelves / wooden drawers with flush base For Quadro 25 partial extension runner and Quadro V6 full extension
runner For securely connecting Quadro runner and pull-out shelf / wooden
drawer with flush base, including mounting plug, without the need for tools
For 16 - 19 mm thick pull-out shelves Plastic, black / white
Order no. PU
0 075 808 1/5 pair
Lift-off guard for wooden drawers with plug-on assembly
Wooden drawers for plug-on assembly can additionally be secured using the optional lift-off guard
Plastic, grey
Order no. PU
9 105 699 1/200 ea.
Mounting plug
For drawers with flush bottom and pull-out shelves Plastic
Article Colour Order no. PU
Front Beige 0 047 216 1/200 ea.
Rear White 0 073 213 1/200 ea.
The length of the pull-out shelf/drawer is reduced by 10 mm when using the rear mounting plug.
Drawer runnerQuadroAccessories
1493Technik für Möbel
Front adjuster
For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer front White plastic
Order no. PU
0 071 833 1/200 ea.
Mounting
ø 20
10
ø 5
±
±
1.
2.
3.
Use ø 4 mm countersunk screws to fix the front panel fitting.
Screw length = drawer side profile thickness + 10 mm housing thickness
After adjustment, the front panel must be secured by means of oneadditional chipboard screw
Chipboard screw / Direct fixing screw
For attaching Quadro runners
Dimensions mm Order no. PU
ø 4 x 16 0 010 085 200 ea.
ø 6.3 x 10.5 0 051 264 200 ea.
ø 6.3 x 14 0 051 265 200 ea.
Drawer runnerQuadroAccessories
1494 www.hettich.com
Partial extension runner Quadro 25, slide-on assembly
ø 4 ø 6,3
1.
2.
Full extension runner Quadro V6, slide-on assembly
ø 4 ø 6,3
2.
1.
Full extension runner Quadro V6+, slide-on assembly
ø 4 ø 6,3
2. 1.
Full extension runner Quadro V6 for under-base mounting, slide-on assembly
ø 4
2.
1.
Drawer runnerQuadroTechnical Information
1495Technik für Möbel
Partial extension runner Quadro 25, plug-on assembly
ø 4 ø 6,3
2.
1.Flush bottom panel
2.
1.Grooved bottom panel
Partial extension runner Quadro 40 for under-base mounting, plug-on assembly
ø 4
Flush bottom panel Grooved bottom panel
Drawer runnerQuadroTechnical Information
1496 www.hettich.com
Catch for wooden drawers with grooved base
4864
1080
Quadro 25 / Quadro V6
9ø 3,5 x 20
Catch for wooden drawers with grooved base (Quadro V6+ full extension runner)
4864
10
16
80
26 ø 3,5 x 20
30
30
Catch for pull-out shelves / wooden drawers with flush base
32 7
37,4
47,5
ø 8 x 13
10
6
26,5
20
1012
Quadro 25 / Quadro V6
13
ø 3,5 x 16
ø 3,5
ø 3,5
Lift-off guard for wooden drawers with plug-on assembly
10
3232
ø 6
3232
6
Drawer runnerQuadroTechnical Information
1498 www.hettich.com
Partial extension runner: with a loading capacity of up to 34 kg. Suitable for many applications.
Full extension runner: with a loading capacity of up to 45 kg. With smooth, easy running action and ergonomic access to drawer contents.
Over extension runner: with a loading capacity of up to 60 kg. Unobstructed view of everything inside.
Disciplined marathon runners: Hettich ball-bearing runners are distinguished by perfected, robust technology: harde-ned steel balls embedded in a ball case of noise-absorbing plastic – they guarantee smooth, easy action and high lateral stability. Sound quality for reliable, no-maintenance
operation for years on end. For exacting demands on qua-lity in the office, living-room and bedroom. For creating partial, full and over extension drawers.
Runners for wooden drawersBall-bearing runners KA
1499Technik für Möbel
Ball-bearing runner systems for slot mounting Range summary / Technical comparison 1500
Ball-bearing runners for side installation Range summary / Technical comparison 1501 - 1502
Ball-bearing runners for overlay installation Range summary / Technical comparison 1502 - 1503
Accessories Range summary / Technical comparison 1504
Technical Information 1521 - 1523 Quality criteria 1539
Assembly aids 2681
Runners for wooden drawersBall-bearing runners KASummary
1500 www.hettich.com
KA 1730
Page 1506
Loading capacity 10 kg
Drawer lengths 155 - 550 mm
Description Partial extension
Installation 17 mm groove
KA 270
1507
12 kg
230 - 550 mm
Partial extension
27 mm groove
KA 290
1508
20 kg
200 - 550 mm
Over extension
27 mm groove
Runners for wooden drawersBall-bearing runners KARange summary / Technical comparison
1501Technik für Möbel
KA 4532 Silent System
1509
35 kg
300 - 700 mm
Full extension runner with inte-grated soft-closing function, separable
Side installation
KA 4532 Push to open
1510
35 kg
300 - 700 mm
Full extension runner with integrated opening system, separable
Side installation
KA 5632 SC
1511
40 kg
300 - 700 mm
Full extension runner with integrated self-closing function, separable
Side installation
KA 5632
1512
45 kg
250 - 700 mm
Full extension runner, separable
Side installation
Runners for wooden drawersBall-bearing runners KARange summary / Technical comparison
1502 www.hettich.com
KA 5332
Page 1513
Loading capacity 30 kg
Drawer lengths 250 - 550 mm
Description Full extension runner, separable
Installation Side installation
KA 3432
1514
34 kg
250 - 700 mm
Partial extension runner, sepa-rable
Side installation
KA 4932
1515
60 kg
250 - 700 mm
Over extension runner, sepa-rable
Side installation
Runners for wooden drawersBall-bearing runners KARange summary / Technical comparison
1503Technik für Möbel
KA 4620
1516
90 kg
300 - 700 mm
Over extension runner for 19 mm installed width, sepa-rable
Side installation
KA 3320
1517
136 kg
310 - 910 mm
Full extension runner for 19 mm installed width
Side installation
KA 4532 AM Silent System
1518
35 kg
300 - 700 mm
Full extension runner with inte-grated soft-closing function, separable
Overlay installation
KA 4532 AM Push to open
1519
35 kg
300 - 700 mm
Full extension runner, separable
Overlay installation
Runners for wooden drawersBall-bearing runners KARange summary / Technical comparison
1504 www.hettich.com
KA 4932 AM
Page 1520
Loading capacity 60 kg
Drawer lengths 350 - 600 mm
Description Over extension runner, sepa-rable
Installation Overlay installation
Accessories
1533 - 1537
Buffer / stabiliser / spacer profile / spacer discs / central locking / front adjuster / fixing screws
Runners for wooden drawersBall-bearing runners KARange summary / Technical comparison
1506 www.hettich.com
HettCAD
Partial extension runner with pull-out stop and roll-out guard Runner and ball race form a complete, non-separable unit Precision control for silky smooth running action and high lateral
stability With additional front support for drawer lengths of 430 mm and over For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel
Ball-bearing runner KA 1730, 17 mm groove
Nominal length mm
Drawer length SL mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing C mm
Carcase rail mm
Drawer runner mm
Order no. PU
without front support
200 155 - 210 32 96 101 150 133 0 079 054 1/20 set
250 185 - 260 44 128 132 182 164 0 079 055 1/20 set
300 185 - 305 44 128 153 182 185 0 030 765 1/20 set
330 220 - 340 56 160 178 214 210 0 066 933 1/20 set
350 220 - 355 56 160 185 214 217 0 071 835 1/20 set
380 250 - 390 68 192 209 246 241 0 071 836 1/20 set
400 250 - 410 68 192 217 246 249 0 030 766 1/20 set
with front support
430 430 86 224 398 278 430 0 079 056 1/20 set
450 450 86 224 418 278 450 0 030 767 1/20 set
480 480 98 256 448 310 480 0 079 057 1/20 set
500 500 98 256 468 310 500 0 030 768 1/20 set
550 550 110 288 518 342 550 0 030 769 1/20 set
Planning dimensions
SL
M 4
37 b1EL
C
16
32 329
≥ KT = SL + 1
6 - 710
17 8,58,5
M 4 x 9
ø 3,5 ø 6,3
≤ 13
ø 3,5 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1521Accessories, see page 1533 - 1537
Drawer runnerPartial extension runner KA 1730 for slot mountingLoading capacity 10 kg
1507Technik für Möbel
HettCAD
Partial extension runner with pull-out stop and roll-out guard Runner and ball race form a complete, non-separable unit Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel
Ball-bearing runner KA 270, 27 mm groove
Nominal length mm
Drawer length SL mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing C mm
Carcase rail mm
Drawer runner mm
Order no. PU
350 230 - 350 56 160 190 214 222 0 025 155 1/10 set
550 350 - 550 80 288 296 342 328 0 025 156 1/10 set
Planning dimensions
M 4 x 9
10
6 - 7
2713,5
13,5 329
16
37
32
ELM 4
b1
C SL ø 3,5 ø 6,3
≥ KT = SL + 1ø 3,5 ø 6,3= minimum number of screw-fixing positions
AdviceTechnical information, see page 1521Accessories, see page 1533 - 1537
Drawer runnerPartial extension runner KA 270 for slot mountingLoading capacity 12 kg
1508 www.hettich.com
HettCAD
Over extension runner with pull-out stop and roll-out guard Runner and ball race form a complete, non-separable unit Precision control for silky smooth running action and high lateral sta-
bility For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel
Ball-bearing runner KA 290, 27 mm groove
Nominal length mm
Drawer length SL mm
Over extension runner OE mm
Hole spacing b1 mm
Hole spacing C mm
Carcase rail mm
Drawer runner mm
Order no. PU
250 - 310 200 - 310 24 192 165 246 197 0 026 561 1/5 set
310 - 450 310 - 450 24 256 271 310 303 0 026 562 1/5 set
450 - 550 450 - 550 40 256 296 310 328 0 026 578 1/5 set
Planning dimensions
19,4
M 4 x 9
6 - 7
2713,5
13,5
37
32
b1
932
M 4OE
C
SL
≥ KT SL 200 - 249) = 250≥ KT SL (≥ 250) = 250 + 1 ø 3,5 ø 6,3
ø 3,5 ø 6,3
≤ 13
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1521Accessories, see page 1533 - 1537
Drawer runnerOver extension runner KA 290 for slot mountingLoading capacity 20 kg
1509Technik für Möbel
HettCAD
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Using a release lever, the drawer can be detached from the runner and thus removed and re-fitted with ease.
Precision control for silky smooth running action and high lateral stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 2 Galvanised steel, blue passivated
Ball-bearing runner KA 4532 Silent System, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum car-case depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
300 304 171 9 114 271 1/10 pair
350 354 64 220 9 114 273 1/10 pair
400 404 64 254 9 114 274 1/10 pair
450 454 96 294 9 114 275 1/10 pair
500 504 96 64 344 9 114 276 1/10 pair
550 554 96 128 394 9 114 277 1/10 pair
600 604 96 160 444 9 114 278 1/10 pair
650 654 96 128 96 494 9 114 279 1/10 pair
700 704 96 128 128 544 9 114 280 1/10 pair
Planning dimensions
46
12,7
23
23 ø 4
37
37
128
≥ KT
b1
C
b2 b3
NL
ø 4 ø 6,0
ø 4 ø 6,0
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1521Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 4532 with Silent System for side mountingLoading capacity 35 kg
1510 www.hettich.com
HettCAD
Push to open - the precision activating mechanism opens the drawer automatically and in virtual silence - a light press is all it takes!
A release lever makes the drawer easy to remove and re-fit. Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 2 Galvanised steel, blue passivated
Ball-bearing runner KA 4532 Push to open, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
300 304 192 9 114 281 1/10 pair
350 354 64 242 9 114 282 1/10 pair
400 404 96 292 9 114 283 1/10 pair
450 454 160 342 9 114 284 1/10 pair
500 504 96 96 392 9 114 285 1/10 pair
550 554 96 128 442 9 114 286 1/10 pair
600 604 96 128 96 492 9 114 288 1/10 pair
650 654 96 128 128 542 9 114 289 1/10 pair
700 704 96 128 192 592 9 114 290 1/10 pair
Planning dimensions
46
12,7
23
23 ø 4
37
37
128
≥ KT
b1
C
b2 b3
NL
ø 4 ø 6,0
ø 4 ø 6,0
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
Stated dimensions are based on a 4 mm gap between front panels.
AdviceTechnical information, see page 1521Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 4532 with Push to open for side mountingLoading capacity 35 kg
1511Technik für Möbel
HettCAD
Precision full extension runner – the integrated self-closing feature reliably and automatically closes the drawer
Using a release lever, the drawer can be detached from the runner and thus removed and re-fitted with ease.
Precision control for silky smooth running action and high lateral stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 5632 SC with self-closing function, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
300 304 208 9 080 470 1 pair
350 354 240 9 080 471 1 pair
400 404 96 288 9 080 474 1 pair
450 454 96 320 9 080 475 1 pair
500 504 96 128 352 9 080 476 1 pair
550 554 96 128 416 9 080 478 1 pair
600 604 96 128 96 416 9 080 479 1 pair
650 654 96 128 128 544 9 080 480 1 pair
700 704 96 128 192 544 9 080 481 1 pair
Planning dimensions
46
12,7
23
23 ø 4
37
37
128
≥ KT
b1
C
b2 b3
NL
ø 4 ø 6,0
ø 4 ø 6,0
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 5632 SC with Stop Control for side mountingLoading capacity 40 kg
1512 www.hettich.com
HettCAD
Precision full extension runner with pull-out stop and roll-out guard Using a release lever, the drawer can be detached from the runner
and thus removed and re-fitted with ease Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 5632, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Hole spacing b5 mm
Hole spacing C mm
Order no. PU
250 254 192 0 073 276 1 pair
300 304 96 242 0 073 277 1 pair
350 354 96 292 0 073 278 1 pair
400 404 96 96 342 0 073 279 1 pair
450 454 96 128 392 0 073 280 1 pair
500 504 96 128 64 442 0 073 281 1 pair
550 554 96 128 64 32 32 492 0 073 282 1 pair
600 604 96 128 96 32 32 542 0 073 283 1 pair
650 654 96 128 160 32 32 592 0 073 284 1 pair
700 704 96 128 192 32 32 642 0 041 355 1 pair
Planning dimensions
46
12,7
23
23 ø 4
ø 4 ø 6,0 37
37
128 b1
C
b2 b3 b4 b5
NL
ø 4 ø 6,0
≥ KT
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 5632 for side mountingLoading capacity 45 kg
1513Technik für Möbel
HettCAD
Precision full extension runner with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the runner and
thus removed and re-fitted with ease Precision control for silky smooth running action and high lateral stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 5332, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Hole spacing b5 mm
Hole spacing C mm
Order no. PU
250 254 192 9 070 496 1/10 pair
300 304 96 242 9 070 498 1/10 pair
350 354 96 292 9 057 402 1/10 pair
400 404 96 96 342 9 057 403 1/10 pair
450 454 96 128 392 9 057 404 1/10 pair
500 504 96 128 64 442 9 057 405 1/10 pair
550 554 96 128 64 32 32 492 9 057 407 1/10 pair
Planning dimensions
45
12,7
22,5
ø 422,5
37 b1
37
128 b2 b3 b4 b5
C
NL
ø 4 ø 6,0
ø 4 ø 6,0
≥ KT
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 5332 for side mountingLoading capacity 30 kg
1514 www.hettich.com
HettCAD
Precision partial extension runner with pull-out stop and roll-out prevention
Using a release lever, the drawer can be detached from the runner and thus removed and re-fitted with ease.
Precision control for silky smooth running action and high lateral stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 3432, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
250 254 77 192 0 041 344 1 pair
300 304 81 96 242 0 041 345 1 pair
350 354 88 96 292 0 041 346 1 pair
400 404 100 96 96 342 0 041 347 1 pair
450 454 113 96 128 392 0 041 348 1 pair
500 504 125 96 128 64 442 0 041 349 1 pair
550 554 138 96 128 96 492 0 041 351 1 pair
600 604 150 96 128 128 542 0 041 352 1 pair
650 654 163 96 128 192 592 0 041 353 1 pair
700 704 175 96 128 224 642 0 041 354 1 pair
Planning dimensions
2
37
16
37 128
≥ KT
EL
b1 b2 b3
C
NL
12,7
17,5
17,535
ø 4
ø 4 ø 6,0
ø 4 ø 6,0
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerPartial extension runner KA 3432 for side mountingLoading capacity 34 kg
1515Technik für Möbel
HettCAD
Over extension runner with pull-out stop and roll-out guard Using a release lever, the drawer can be detached from the runner
and thus removed and re-fitted with ease. Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 4932, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Hole spacing b5 mm
Hole spacing C mm
Order no. PU
250 254 192 0 041 356 1 pair
300 304 96 242 0 041 357 1 pair
350 354 96 292 0 041 358 1 pair
400 404 96 96 342 0 041 359 1 pair
450 454 96 128 392 0 041 361 1 pair
500 504 96 128 64 442 0 041 362 1 pair
550 554 96 128 64 32 32 492 0 041 363 1 pair
600 604 96 128 96 32 32 542 0 041 364 1 pair
650 654 96 128 160 32 32 592 0 041 365 1 pair
700 704 96 128 192 32 32 642 0 041 366 1 pair
Planning dimensions
38 12837
37
b1 b3b2 b4 b5
CNL
≥ KT
50
12,7
25
25 ø 4
ø 4 ø 6,0
ø 4 ø 6,0
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerOver extension runner KA 4932 for side mountingLoading capacity 60 kg
1516 www.hettich.com
HettCAD
Over extension runner with pull-out stop and roll-out guard Using a release lever, the drawer can be detached from the runner
and thus removed and re-fitted with ease. Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 4620, 19 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm Hole spacing b2 mm Hole spacing C mm Order no. PU
300 304 125 233.5 0 041 389 1 pair
350 354 175 283.5 0 041 391 1 pair
400 404 111 114 333.5 0 041 392 1 pair
450 454 136 139 383.5 0 041 393 1 pair
500 504 161 164 433.5 0 041 394 1 pair
550 554 186 189 483.5 0 041 395 1 pair
600 604 211 214 533.5 0 041 396 1 pair
650 654 236 239 583.5 0 041 397 1 pair
700 704 261 264 633.5 0 041 398 1 pair
Planning dimensions
19
29
29
58ø 4,5
38 46 57
34ø 8,2
12 12
b2b1
Cø 4,5 ø 6,3
NL
ø 4 ø 6,0
ø 4 ø 6,0
≥ KT
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerOver extension runner KA 4620 for side mountingLoading capacity 90 kg
1517Technik für Möbel
HettCAD
Full extension runner with push-in and pull-out stops Runner and ball race form a complete, non-separable unit Precision control for silky smooth running action and high lateral
stability For drawers with grooved, rebated or loosely fitted drawer bottom Loading capacity to EN 15338, Level 3 Galvanised steel
Ball-bearing runner KA 3320, 19 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm Hole spacing C mm Order no. PU
310 312 127 217.5 0 073 287 1 pair
360 362 178 268.5 0 073 288 1 pair
410 412 228.5 319.5 0 073 289 1 pair
460 462 279.5 370 0 073 290 1 pair
510 512 330 421 0 073 291 1 pair
560 562 381 471.5 0 073 292 1 pair
610 612 432 522.5 0 073 293 1 pair
660 662 482.5 573.5 0 073 294 1 pair
710 715 533.5 624 0 073 295 1 pair
760 762 5840 675 0 073 296 1 pair
810 812 635 725 0 041 367 1 pair
860 862 686 776 0 041 368 1 pair
910 912 736 827 0 041 369 1 pair
Planning dimensions
19
38
38
76
ø 5
ø 4,5
+0,75
ø 85 x 9,5 8 x10
34
76 7615
≥ KT
ø 6C
b1
NL
Fix to drawer withat least 8 screws
= minimum number of screw-fixing positions
AdviceFor technical information, see page 1522Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 3320 for side mountingLoading capacity 136 kg
1518 www.hettich.com
HettCAD
Silent System - the integrated soft-closing function shuts the drawer quietly and gently
Using a release lever, the drawer can be detached from the runner and thus removed and re-fitted with ease.
Precision control for silky smooth running action and high lateral stability For wooden drawers and pull-out shelves Loading capacity to EN 15338, Level 2 Galvanised steel, blue passivated
Ball-bearing runner KA 4532 AM Silent System, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum car-case depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
300 304 230 9 114 548 1/10 pair
350 354 64 280 9 114 553 1/10 pair
400 404 64 315 9 114 554 1/10 pair
450 454 96 365 9 114 555 1/10 pair
500 504 96 64 415 9 114 557 1/10 pair
550 554 96 128 465 9 114 558 1/10 pair
600 604 96 160 515 9 114 559 1/10 pair
650 654 96 128 96 565 9 114 560 1/10 pair
700 694 96 128 128 615 9 114 561 1/10 pair
Planning dimensions
46
12,7
23
23
ø 4
37 128≥ KT
b1 b2 b3
37 CNL
16
7
ø 4 ø 6,0
ø 4 ø 6,0
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1523Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 4532 AM with Silent System for overlay installationLoading capacity 35 kg
1519Technik für Möbel
HettCAD
Push to open - the precision activating mechanism opens the drawer automatically and in virtual silence - a light press is all it takes!
A release lever makes the drawer easy to remove and re-fit. Precision control for silky smooth running action and high lateral
stability For wooden drawers and pull-out shelves Loading capacity to EN 15338, Level 2 Galvanised steel, blue passivated
Ball-bearing runner KA 4532 AM Push to open, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum car-case depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing C mm
Order no. PU
300 304 192 9 114 562 1/10 pair
350 354 64 242 9 114 580 1/10 pair
400 404 96 292 9 114 581 1/10 pair
450 454 160 342 9 114 582 1/10 pair
500 504 96 96 392 9 114 583 1/10 pair
550 554 96 128 442 9 114 584 1/10 pair
600 604 96 128 96 492 9 114 585 1/10 pair
650 654 96 128 128 542 9 114 586 1/10 pair
700 704 96 128 192 592 9 114 587 1/10 pair
Planning dimensions
46
12,7
23
23
ø 4
37 128≥ KT
b1 b2 b3
37 CNL
16
7
ø 4 ø 6,0
ø 4 ø 6,0
Stated dimensions are based on a 4 mm gap between front panels.
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1523Accessories, see page 1533 - 1537
Drawer runnerFull extension runner KA 4532 AM with Push to open for overlay installationLoading capacity 35 kg
1520 www.hettich.com
HettCAD
Over extension runner with pull-out stop and roll-out guard Using a release lever, the drawer can be detached from the runner
and thus removed and re-fitted with ease. Precision control for silky smooth running action and high lateral sta-
bility For wooden drawers and pull-out shelves Loading capacity to EN 15338, Level 1 Galvanised steel, blue passivated
Ball-bearing runner KA 4932 AM, 12.7 mm installed width
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Hole spacing C mm
Order no. PU
350 354 283 9 080 291 1 pair
400 404 96 333 9 080 292 1 pair
450 454 128 383 9 080 293 1 pair
500 504 128 64 433 9 080 294 1 pair
550 554 128 64 32 32 483 9 080 295 1 pair
600 604 128 96 32 32 533 9 080 296 1 pair
Planning dimensions
50
12,7
25
25 17
9ø 4
ø 4 ø 6,0
ø 4 ø 6,0
38 128 9637
37
b2b1 b3 b4
CNL
≥ KT= minimum number of screw-fixing positions
AdviceTechnical information, see page 1523Accessories, see page 1533 - 1537
Drawer runnerOver extension runner KA 4932 AM for overlay installationLoading capacity 60 kg
1521Technik für Möbel
KA 1730
KA 270
KA 290
KA 4532
Drawer runnerBall-bearing runners KATechnical Information
1522 www.hettich.com
KA 5632 SC, 5632, 5332, 4932
KA 3432
KA 4620
KA 3320
Drawer runnerBall-bearing runners KATechnical Information
1523Technik für Möbel
KA 4532 AM
KA 4932 AM
Drawer runnerBall-bearing runners KATechnical Information
1524 www.hettich.com
Over extension runner: with a loa-ding capacity up to 50 kg. Unob-structed view of everything inside.
Partial extension runner: loading capacity of up to 100 kg. Suitable for many applications.
Noticeable convenience opening and closing drawers: roller runners with integrated self-closing function and roll-out guard. A further benefit: the drawers are easy to remove, e.g. for thorough cleaning or for quickly taking their con-
tents somewhere else. The system is simple and secure, sturdy and durable, open to tolerances and production-friendly.
Runners for wooden drawersRoller runners FR
1525Technik für Möbel
Roller runners with Stop Control / partial extension Range summary / Technical comparison 1526 - 1527
Roller runner with Stop Control / over extension Range summary / Technical comparison 1527
Accessories Range summary / Technical comparison 1527
Technical Information 1538 Quality criteria 1539
Assembly aids 2681
Runners for wooden drawersRoller runners FRSummary
1526 www.hettich.com
FR 302
Page 1528
Loading capacity 20kg
Drawer lengths 250 - 500 mm
Description Partial extension runner
FR 402
1529
25kg
250 - 600 mm
Partial extension runner
FR 602
1530
30kg
250 - 800 mm
Partial extension runner
Runners for wooden drawersRoller runners FRRange summary / Technical comparison
1527Technik für Möbel
FR 6142
1531
50kg
250 - 800 mm
Over extension runner
FR 1105
1532
100kg
400 - 1000 mm
Partial extension runner
Accessories
1533 - 1537
Central locking / spacer discs / spacer profile / buffer / stabiliser / front adjuster / fixing screws
Runners for wooden drawersRoller runners FRRange summary / Technical comparison
1528 www.hettich.com
HettCAD
Stop Control - integrated self-closing mechanism for automatic closure
With double-stop and roll-out guard With captive guide rail on one side Automatic tolerance compensation ± 1 mm Loading capacity to EN 15338, Level 1 Powder-coated steel, white
Roller runner FR 302
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Order no. PU
250 253 69 64 0 075 993 1/20 pair
300 303 69 96 0 075 994 1/20 pair
350 353 69 96 64 0 075 995 1/20 pair
400 403 69 96 128 0 075 996 1/20 pair
450 453 79 96 128 32 0 075 997 1/20 pair
500 503 86 96 128 64 32 0 013 089 1/20 pair
Planning dimensions
916
37 128 b1 b2 b3 b4
NL
EL
≥ KT
12,5±1
16 11
12,5
35
ø 3,5
≥ 16
ø 3,5 ø 6,3
ø 3,5 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1538Accessories, see page 1533 - 1537
Drawer runnersPartial extension runner FR 302 with Stop ControlLoading capacity 20 kg
1529Technik für Möbel
HettCAD
Stop Control - integrated self-closing mechanism for automatic closure
With double-stop and roll-out guard With captive guide rail on one side Automatic tolerance compensation ± 1 mm Loading capacity to EN 15338, Level 1 Steel, powder-coated, white or brown
Roller runner FR 402
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Order no. PU
White Brown
250 253 69 64 1 061 611 1/20 pair
300 303 69 96 1 058 344 1/20 pair
350 353 69 96 64 1 058 345 1 075 324 1/20 pair
400 403 69 96 128 1 058 346 1 067 544 1/20 pair
450 453 79 96 128 32 1 058 347 1 067 545 1/20 pair
500 503 86 96 128 64 32 1 058 348 1 067 546 1/20 pair
550 553 94 96 128 128 1 058 349 1 078 799 1/20 pair
600 603 104 96 128 128 1 058 350 1 078 800 1/20 pair
Planning dimensions
916
37 128 b1 b2 b3 b4
NL
EL
≥ KT
12,5±1
16 11
12,5
35
ø 3,5
≥ 16
ø 3,5 ø 6,3
ø 3,5 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1538Accessories, see page 1533 - 1537
Drawer runnersPartial extension runner FR 402 with Stop ControlLoading capacity 25 kg
1530 www.hettich.com
HettCAD
Stop Control - integrated self-closing mechanism for automatic closure
With double-stop and roll-out guard With captive guide rail on one side Automatic tolerance compensation + 2 mm Loading capacity to EN 15338, Level 2 Steel, powder-coated, white or brown
Roller runner FR 602
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Order no. PU
White Brown
250 253 74 0 041 657 1/20 pair
300 303 74 96 0 041 659 1/20 pair
350 353 74 96 64 0 041 661 0 041 660 1/20 pair
400 403 74 96 96 0 041 663 0 041 662 1/20 pair
450 453 87 96 128 0 041 665 0 041 664 1/20 pair
500 503 87 96 128 96 0 041 667 0 041 666 1/20 pair
550 553 102 96 128 128 0 041 669 0 041 668 1/20 pair
600 603 102 96 128 128 0 041 671 0 041 670 1/20 pair
650 653 112 224 224 0 041 673 1/10 pair
700 703 122 224 256 0 041 675 1/10 pair
750 753 137 224 256 0 041 677 1/10 pair
800 803 137 224 256 128 0 041 679 1/10 pair
Planning dimensions
16
37
9
128
≥ KT
b1 b2 b3
EL
NL
1115
12,5+2 12,5
33
≥ 16
ø 3,5 ø 3,5 ø 6,3
ø 3,5 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1538Accessories, see page 1533 - 1537
Drawer runnersPartial extension runner FR 602 with Stop ControlLoading capacity 30 kg
1531Technik für Möbel
HettCAD
Stop Control - integrated self-closing mechanism for automatic closure
With captive guide rails on both side With lift-off guard and lockable centre runner Automatic tolerance compensation + 2 mm Steel, powder-coated, white or brown
Roller runner FR 6142
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Over extension runner OE mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Order no. PU
White Brown
250 255 10 0 041 633 1/4 pair
300 305 15 96 0 041 635 1/4 pair
350 355 15 96 64 0 041 637 0 041 636 1/4 pair
400 405 30 96 96 0 041 639 0 041 638 1/4 pair
450 455 30 96 128 0 041 641 0 041 640 1/4 pair
500 505 30 96 128 64 32 0 041 643 0 041 642 1/4 pair
550 555 30 96 128 128 0 041 645 0 041 644 1/4 pair
600 605 30 96 128 128 0 041 647 0 041 646 1/4 pair
650 655 30 224 224 0 041 649 1/4 pair
700 705 30 224 256 0 041 651 1/4 pair
750 755 30 224 256 0 041 653 1/4 pair
800 805 30 224 256 128 0 041 655 1/4 pair
Planning dimensions
43 60≥ 48
12,5 +1
12,5 +1
ø 3,5 ø 3,5 ø 6,3
37 128
9
16
≥ KT
b1 b2 b3 b4OE
NL
ø 3,5 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1538Accessories, see page 1533 - 1537
Drawer runnersOver extension runner FR 6142 with Stop ControlLoading capacity 50 kg
1532 www.hettich.com
HettCAD
Stop Control - integrated self-closing mechanism for automatic closure
With double-stop and roll-out guard Automatic tolerance compensation + 1 mm Steel, bright galvanised
Roller runner FR 1105
Nominal length / Drawer length NL mm
Minimum carcase depth KT mm
Extension loss EL mm
Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Hole spacing b4 mm
Order no. PU
400 405 89 160 160 0 030 273 1 pair
450 455 89 192 192 0 030 274 1 pair
500 505 89 160 128 160 0 030 275 1 pair
550 555 89 160 160 160 0 030 276 1 pair
600 605 99 192 160 192 0 030 277 1 pair
650 703 99 192 192 201.5 0 030 278 1 pair
700 705 119 224 192 219.5 0 030 279 1 pair
750 755 119 224 224 237.5 0 030 280 1 pair
800 805 119 256 224 255.5 0 030 281 1 pair
850 855 119 192 192 192 204.5 0 030 282 1 pair
900 905 134 288 288 259.5 0 030 283 1 pair
950 955 134 320 256 309.5 0 030 284 1 pair
1000 1005 134 352 224 359.5 0 030 285 1 pair
Planning dimensions
34
16
≥ KT
b2b1 b3
EL
b4
NL
17
12,5
+0,5
9 32≥ 20
≥ 20
ø 4
17+0,5
ø 4 ø 6,3
ø 4 ø 6,3
= minimum number of screw-fixing positions
AdviceTechnical information, see page 1538Accessories, see page 1533 - 1537
Drawer runnersPartial extension runner FR 1105 with Stop ControlLoading capacity 100 kg
1533Technik für Möbel
Press-in buffer
For hole ø 6 x 7 mm plastic
Colour Order no. PU
Brown 0 021 154 1/1000 ea.
White 0 025 048 1/1000 ea.
Beige 0 047 353 1/1000 ea.
ø 8
1,5
ø 6
7
Press-in buffer
For hole ø 5 x 5.5 mm Transparent plastic
Order no. PU
9 079 298 1/1000 ea.
ø 8
1,5
ø 5
5,5
Stick-on buffer
Self-adhesive Transparent plastic
Order no. PU
0 072 120 50 ea.
0 046 695 1000 ea.
1,7
ø 8
RV 8
For fixing drawer bottoms and rear panels White plastic Screw ø 3.5 x 20 mm galvanised
Order no. PU
0 079 438 1/200 ea.
154,7
10,7
Drawer runnersBall-bearing runner KA, roller runner FRAccessories
1534 www.hettich.com
37
293287
100020
19ø 7
20 10
18,5ø 19
16
77
≥ 128
X = ≥ 29≥ 128
11
X + 6
±112,5
Spacer profile
Suitable for Drawer runners Quadro and FR roller runners For bridging the hinge protrusion when using internal pot-and-pan
drawers To span greater spaces, several profiles can be clipped
on top of one another The spacer profiles can also be used to even out tolerances White plastic
Width x depth x height mm Order no. PU
25 x 484 x 49 0 013 952 1 ea.
12 x 484 x 49 9 115 956 1 ea.
25/12484
49
Spacer disc
To be used on drawers fitted behind a door The spacer discs bridge the door offset To span greater spaces, several discs can be clipped together Needless to say, the discs can also be used for evening out tolerances White plastic
Distance Order no. PU
3.0 0 033 681 1/100 ea.
4.0 0 033 682 1/100 ea.
5.0 0 033 683 1/100 ea.
Central locking
Central locking system for wooden drawers with roller runner FR 302 / 402 or 602
Barrel for cylinder cam lock, see page 2208 - 221
The following are required for use: 1 set locking bar, length 1000 mm, with 5 adjustable pins 1 set cylinder cam lock including rosette 1 anti-tilt block for wooden drawers
Description Order no. PU
1 Locking bar 0 051 500 1 set
2 Cylinder cam lock 0 013 337 1 ea.
3 Anti-tilt block for wooden drawers 0 040 227 1/10 ea.
Drawer runnersBall-bearing runner KA, roller runner FRAccessories
1535Technik für Möbel
Front adjuster
For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer front White plastic
Order no. PU
0 071 833 1/200 ea.
Mounting
ø 20
10
ø 5
±
±
1.
2.
3.
Use ø 4 mm countersunk screws to fix the front panel fitting.
Screw length = drawer side profile thickness + 10 mm housing thickness
After adjustment, the front panel must be secured by means of oneadditional chipboard screw
Drawer runnersBall-bearing runner KA, roller runner FRAccessories
1536 www.hettich.com
Direct fixing screw
For securing ball-bearing runners ø 6 x 14 mm Steel, nickel-plated
Dimensions mm Order no. PU
ø 6.0 x 14 9 137 114 200 ea.
Direct fixing screw
For securing the roller runner FR 1105 Pozidrive screw Galvanised steel
Dimensions mm Order no. PU
ø 6.3 x 11 0 047 451 200 ea.
ø 6.3 x 14 0 047 452 200 ea.
Direct fixing screw
For securing the ball-bearing runners and roller runners Pozidrive screw Galvanised steel
Dimensions mm Order no. PU
ø 6.3 x 10.5 0 051 264 200 ea.
ø 6.3 x 14 0 051 265 200 ea.
Countersunk screw
For securing ball-bearing runners and roller runners Countersunk head Pozidrive screw Steel, nickel-plated
Dimensions mm Order no. PU
ø 3.5 x 12 9 079 791 200 ea.
ø 3.5 x 16 0 071 925 200 ea.
Drawer runnerBall-bearing runner KA, roller runner FRAccessories
1537Technik für Möbel
Chipboard screw
For securing ball-bearing runners and the roller runner FR 1105 Pozidrive screw Steel, nickel-plated
Dimensions mm Order no. PU
ø 4 x 16 0 010 085 200 ea.
ø 4 x 12 0 058 243 200 ea.
End screw
For securing the ball-bearing runners KA 1730, KA 270 and KA 290 Steel, nickel-plated
Dimensions mm Order no. PU
M4 x 9 0 079 527 200 ea.
Drawer runnerBall-bearing runner KA, roller runner FRAccessories
1538 www.hettich.com
FR 302, 402, 602
FR 6142
1.
2.
3.
Centre runner
Press safetycatch into centrerunner
FR 1105
Drawer runnerRoller runners FRTechnical Information
1539Technik für Möbel
Quality that meets all the demands
The quality of drawer runners is subject to a process of continuous moni-toring. Hettich fittings comply with the national and international quality standards of the markets our customers operate in. The diagrams below show some of the tests to which Hettich fittings are subjected. Application Hettich drawer runners are suitable for use in living room, kitchen, bathroom and office furniture both in the home and business environment. Load capacity and over extension guard The load capacity (to DIN EN 15338) stated in the catalogue is understood to mean the weight of the drawer itself including panel and contents in kg. The applicable level is shown on the product. The loading capacity relates to a reference length of 500 mm. The loading capacity may vary for
other nominal lengths. All Hettich drawer runners feature guards to pre-vent the drawer from rolling out and being removed unintentionally and meet the requirements of the impact test in a test frame to EN 15338. Used in the intended manner for furniture, these runners are suitable for use in living-room, kitchen and bathroom furniture to EN 14749 and for use in office furniture to EN 14073 and EN 14074. The maximum front-panel height is governed in particular by material, drawer size and drawer runner. Testing is conducted on drawers with a 130 mm front panel height and pot-and-pan drawers with a 300 mm front-panel height. Corrosion test Hettich runners satisfy the requirements on corrosion defined in DIN EN 15338, 72-hour condensation-water test to DIN EN 6270.
Wear testThe fully laden drawer must remain in proper working order after opening and closing it for a defined number of times at a defined test velocity.
Retention-on-opening testThe fully-laden drawer is abruptly opened all the way several times at a defined test velocity.
Horizontal load test
Opened all the way, the fully laden drawer is additionally exposed to horizontal strain from a defined lateral force.
F
Vertical strain test
Opened all the way, the drawer is additionally exposed to vertical strain from a defined eccentric force.
F
Drawer runnerQuality criteria