This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ICS 23.060.01
Industriearmaturen – Prüfung von Armaturen – Teil 1: Druckprüfungen,Prüfverfahren und Annahmekriterien – Verbindliche Anforderungen
European Standard EN 12266-1 : 2003 has the status of a DIN Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by CEN/TC 69 ‘Industrial valves’ (Secretariat: France).The responsible German body involved in its preparation was the Normenausschuss Armaturen (ValvesStandards Committee), Technical Committee Grundnormen.
AmendmentsDIN 3230-1 and DIN 3230-2, April 1974 editions, and DIN 3230-3, April 1982 edition, have been supersededby the specifications of EN 12266-1.
Previous editionsDIN 3230: 1953-02, DIN 3230-1: 1974-04; DIN 3230-2: 1974-04; DIN 3230-3: 1975-03, 1982-04.
Ref. No. DIN EN 12266-1 : 2003-06English price group 10 Sales No. 1110
Industrial valves – Testing of valvesPart 1: Pressure tests, test procedures and acceptance criteria –
Mandatory requirementsEnglish version of DIN EN 12266-1
This standard supersedesDIN 3230-1 and DIN 3230-2,April 1974 editions, and, togetherwith DIN EN 12266-2, May 2003edition, supersedes DIN 3230-3,April 1982 edition.
Industriearmaturen – Prüfung von Ar-maturen – Teil 1: Druckprüfungen, Prüf-verfahren und Annahmekriterien – Ver-bindliche Anforderungen
This European Standard was approved by CEN on 2002-12-27.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain,Sweden, Switzerland, and the United Kingdom.
EN 12266-1
March 2003
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung
|ÈÉË
Robinetterie industrielle – Essais des ap-pareils de robinetterie – Partie 1: Essaissous pression, procédures d’essai et cri-tères d’acceptation – Prescriptions obli-gatoires