13) UBS Housing system 2015 PDF

UBS UBS Advanced Technology Advanced Technology Housing SystemHousing System

Proudly designed and developed by an Australian

UBSUBS ADVANCED TECHNOLOGADVANCED TECHNOLOGYY

Speed and simplicity UBS Advanced Technology, is a Integrated Building System (IBS) Its the Eco friendly building solution of the future that is simple to install. Housing construction projects can be completed within days by semi and even unskilled workers. UBS system is designed to provide permanent , green, High Tech, energy efficient accommodation at affordable price.

“Build it once and build it right”


Step1

“Simple to follow, and easy to use IBS method of construction”

Stage (1) Foundation – Slab preparation

UBS uses a series of steel bars we refer to as starter bars.

These bars are wired to the Footings/Slab reinforcing steel prior to the foundations concrete being poured.

They are set out to line up with the core holes within our wall blocks using a template system.

Starter bars protrude from the footings/Slab approximately 300mm above slab height.



Wall blocks are positioned over the starter bars and joined to the foundation in a similar method to laying bricks or blocks using Mgo cement. Ste

Reinforcing steel and services such as electrical conduits and water pipes are run through core holes within the wall block as each level of blocks are installed.

All Core holes are then filled with concrete.

This can be completed at each block level or at plate height.

These core holes once filled with concrete and steel reo bar form the structural skeleton of the building

Stage (2) Wall Construction



Stage (3) Joining wall blocks Externally block are joined in a similar fashion to laying bricks or masonry blocks however Mgo cement is used in place of standard cement. Internally within the wall block they are joined together with steel connection bars. inserted between the structural core holes of each block. This procedure of connecting each block ties not only the blocks together, its also ties the internal columns together (once concrete has been poured into the core holes) creating a concrete and steel reinforced connection



Detail showing block joints.

Open to scrutiny by Engineers or Architects.

The system is far stronger than conventional building systems.

It will withstand high winds and earthquake better than conventional construction methods

UBS UBS ADVANCED TECHNOLOGADVANCED TECHNOLOGYY

One level of this display building was completed in 1 hour and 30 minutes by unskilled workers.

The structure is a 4m x 4m room with a 2m x 4m entry and a additional 2m x 2m display wall .

The area of wall built in that time was the same as laying 2170 bricks and then applying render.

It is easy to understand if one team was putting the footings and slab down, and another teams where putting the buildings up, how fast these buildings could be completed

Speed and Simplicity


Stage (4) Installation of windows and doors

UBS construction system can

accommodate both conventional

window and door frames as well as

utilizing its own specially designed

window and door system.

Core holes adjacent to window or door frames have concrete and steel placed in them to completely encase the frame

with concrete.

This forms concrete lintels and columns around the frames to further

strengthen the structure.



Step 4:

A reinforced bond beam is formed around the entire structure at plate height.

This ties all the core holes (internal columns) together.

It is also where the next attachments are fitted to secure the roof or second floor to the structure.

If engineers require, bond beams can be formed easily at each 1 meter level of the building tying the internal columns together at every block join.

Stage (5) Bond Beam

UBSUBS ADVANCED TECHNOLOGYADVANCED TECHNOLOGY


Step 5 :

Second floor and roof systems are also tied into the wall system by using steel and concrete, (fittings are concreted into the bond beam formed around the entire wall structure)

UBS is a integrated form work system (IBS) comprising prefinished blocks and panels.

Its internal core holes and channels provide form work that is the filled with concrete and reinforcing steel to form the structural skeleton of a building

Stage (6) second floor and roof systems


UBS construction panel can be used for ceilings roofing, additional floors and decking its fully trafficable and can support the weight of workers with ease.

Floor & roof panel average weight is 57 – 60 kg making them easy

to handle and install. (heavy lifting machinery is not required)

Construction Panels


Construction panels are internally reinforced with steel tubes and externally reinforced with fiberglass mesh and our special MgO coating covering both sides of the panel.

Steel tubs are used to tie the panels into the structure – run electrical cables through

Construction Panels


Each block covers the same area in a building as 232 Vietnamese bricks laid within a double wall thickness and then rendered.

A block takes about 4 minutes install.

Before the concrete and steel is added to each block its weight is only 35kg making them extremely

light and easy to handle.

Wall Blocks


Panels and blocks are coated with a special MgO mixture that is:

Fire Proof

Water Resistant

High impact resistant (2 – 3 times

stronger than cement or concrete)

Green – environmentally friendly safe coating

Mold Resistant .

If damaged it is easy to repair.

Extra high thermal qualities (providing insulation against hot and cold weather)

Ideal sound barrier

Technology Advantages


In addition to the many benefits this building system delivers, the coating that's applied to the EPS panels has been,

1) Fiberglass mesh reinforced (this preventing any cracking of the walls and ceiling coatings)

2) The EPS is specially prepared prior to coating (to minimize the chance of delamination)

3) Which means a lot less maintenance to our building structures in the future

Technology Advantages


This section of display wall block has had one side of a block cut away to show why our construction method is second to none.

Walls are tied into the sub-structure of a building by steel reinforcing bars and concrete the entire structure is then tied together by a series of columns' which are then connected by a bond beam surrounding the entire building.

Within the bond beam steel fittings are used to attach the second floor or roofing system.

Structural stability

“ A completely encased building structure providing structural stability and strength”


Our display has been fitted with a small air-conditioning unit so we can demonstrate the thermal qualities of our system. (Cooling & heating savings due to minimal energy loss)

This building system can be applied to suit all requirements.

With benefits far beyond normal construction systems.

Energy Efficient


UBS Advanced Technology has developed a total building and construction system (IBS)

All our products are manufactured within the one fully versatile factory.

Our plant and machinery are fully adjustable and can manufacture many variations of blocks and panels.

There are no limits to what our technology can be used for in building and construction.

Industrial & Commercial buildings, Factories, Warehouses, Shopping Centers, Hotels & resorts, Schools & Universities, Hospitals ...

Housing – every style of housing one can imagine….

The system is ideal for renovations and extensions

UBS has developed fencing and wall systems (livestock fencing, sound barrier walls, retaining walls, below ground pools , domestic fencing ….

UBS Advanced TechnologyUBS Advanced Technology

With ever increasing labor costs and escalating cost of raw materials we are

confident that our technology and product advancements will be kept UBS fencing

in high demand around the Globe.

UBS intension is to develop its business into a Global enterprise by utilizing a

manufactures licensing structure not unlike a franchise system of partners to

promote our products and technologies.

The opportunity offered here is to attract the right partners to become involved

with the company at the grass roots level.

We believe our products to be superior in all aspects to any other product

available on the market at present.

A simple comparisons with existing products marketed today will demonstrate

our products and systems superiority and price competitiveness.

Opportunity

Eco friendly technologies that have

concentrated on environmental issues facing

our world today

Summary Summary The owner and designer of UBS has invested 4 years developing a totally packaged

system of technology and intellectual property that provides –

1) A new innovative Integrated Building System (IBS) which will be use to construct

Eco friendly , structurally stronger, Energy efficient buildings, that can reduce build

times by up to 70% and lower construction costs by between 30 – 50%.

2) Provide a complete packaged building material manufacturing plant and equipment

to produce advanced products that are environmentally friendly in such an efficient

manner they dramatically reducing carbon emissions.

3) Structured a business plan that will enable this advanced technology to be licensed

Globally, the intended licensing system will operate in a way not unlike a franchise

4) Developed a total package deal from machinery manufactures to produce the

necessary machinery licensees will require.

5) Sourced raw material suppliers and designed the machinery to pre mix and bag our

coating mixtures for the supply of materials to licensees. (this is to protect the

formulas of our coating mixtures which from part of our I.P)

6) Design marketing strategies such as the Indigenous Peoples Development

Program which will provide, Housing, Employment, Education & Training within

Indigenous communities allowing them the ability to become financially self-

sufficient.

UBS Advanced TechnologyUBS Advanced Technology

Darryl James Heffernan

Owner : Universal Building Solutions

Phone : +84 944536599 (Vietnam)

Email : [email protected]

Email : [email protected]

SKYPE : darryl_heffernan

LinkedIn: Profile

http://darryl-james-heffernan.strikingly.com/

Contact Details

Proudly designed and developed by an Australian

mailto:[email protected]

mailto:[email protected]

13) UBS Housing system 2015 PDF

Documents

wall construction

level of blocks

display wall

block level

structural core holes

steel connection bars

area of wall

block ties