13 7302 5523 Operator Feedback

7/18/2019 13 7302 5523 Operator Feedback

1/32

2

005ALCATELBELLN.V.ALLRIGHTSRES

ERVED Broadband Access

7302/5523 Operator

Hands-on

Exercises Answers

Alcatel-Lucent University Antwerp1

University

Exercises - Answers

7302-7330/5523 operator part 1

Alcatel-Lucent University Antwerp

University

3FL 00324 AAAA WHAAA Ed 01


2/32

2

007ALCATELBELLN.V.ALLRIGHTSRESERVED

Alcatel 5523 & 7302 Hands-on Exercises

Table of contents

Getting started wit te CDE ! A"#ate" 552$ A%S &. $

ANEL 'eat(res )' A%S &. 5

Li#ense *e+ )' 552$ A%S &. 7

Basi# e,(i&-ent set(& wit A%SCLI &. /

Cr)ss#)nne#t. 1 VLAN set(& and end(ser set(& p. 19

Resetting te A"#ate" 7$02 ISA p. 21

Ba#3(& rest)re )' ASAC4RE and seri#e (6 p. 25

a("t -anage-ent p. 28

3FL 00324 AAAA WHAAA Ed01 Alcatel-Lucent University 2


3/32

2



Getting started with the CDE & Alcatel 5523 AWS

A'ter #)-&"eting te assign-ents in tis #a&ter8 te trainee wi"" 6e a6"e t)1

L)g )n t) te A"#ate" 552$ ia te C)--)n Des3t)& Enir)n-ent 9CDE:

Start and st)& te A%S &r)#esses

)nit)r and inter&ret te A%S stat(s 9in#"(ding &r)#ess stat(s:

;se te CDE t) naigate 6etween di''erent ;Ss

A"#ate" 552$7$02 Hands)n 9$L 00$2>A ED02:

C(st)-er D)#(-entati)n1 A"#ate" 552$ A%S Ad-inistrati)n ;ser G(ide

?. L)g )n t) te A%S. Te trainer wi"" &r)ide +)( wit ")g)nids and

&assw)rds.

Fill in your logon-id and press enter. Next, give the corresponding

password and press enter again. The olaris des!top should open.

2. %at is te ersi)n )' te A%S@"n the right #otto$ corner o% the des!top you should see the &' icon.

(pen the &' $enu #y clic!ing on the triangle. )lic!ing on the

ad$instration icon , opens a new window .*o##le clic! on the version-

icon shows the di%%erent versions o% all the processes that $a!e up the

&'.

$. Set (& te CDE s) tat +)( ae te netw)r3 e"e-ents iew 9ANEL: in )ne

w)r3s&a#e and te NE +)( wi"" 6e w)r3ing )n 9EL: in an)ter.

+ove the applications in the di%%erent wor!spaces, e.g. (ne, Two.

Note you should open &N and + #e%ore you can $ove the$.

+oving is done #y right clic!ing on the application, choose /(ccupy'or!space0 and select the correct wor!space.

?. Is te A%S #(rrent"+ r(nning@ H)w is tis indi#ated@ %at is te stat(s@ H)w

did +)( #e#3 te stat(s@

ia the /&d$inistration 3 +aintenance $enu, start the tatus

application 4$ar!ed with a #ig yellow /6. The color represents the

status. 7ou can also chec! the status via the $ini$ied rocess

+onitoring window


(#:ectives ;e%erences ogon tart < top the

&'


4/32

2



2. Is it a standa")ne )r distri6(ted set(& tat +)( are w)r3ing )n@ H)w #an +)(

see tis@ Gie 2 &)ssi6i"ities.

ia the tatus 'indow. 'or!station and type o% 'or!station are

speci%ied

ia rocess $onitoring, in the tree view all the processes are visi#ly

divided per wor!station. The %irst visi#le wor!station is always the $aster.

$. a3e s(re tat +)( #an see te A%S stat(s8 wit)(t 3ee&ing te &r)#essing

-)nit)ring wind)w )&en.

ee previous answer. +ini$ie the tatus window 4or the rocess

+onitoring window6. The $ini$ied window shows the color. "% one

process is %ailing or ac!nowledged, the $ini$ied status window will #e

red. The process-$onitoring window $a!es the distinction 4red %or %ailing

process, #lue %or ac!nowledged process6.

uestions.

$. %at is te a&&"i#ati)n t) )&en wen +)( want t) see te di''erent 6)ards )'

te NE@

The +-?+ window. (pen /Networ! le$ents, dou#le clic! on an

N, and dou#le clic! on a su#rac!.


5/32

2





6/32

2



ANEL features of AWS


)di'+ te "ist )' netw)r3 e"e-ents.

A&&"+ a 'i"ter t) te ANEL iew.

er')r- a sear# )n s&e#i'i# NEs8 6)ards8 et#.

Ce#3 te ")ad )' I&r)#esses.

Ce#3 te rea#a6i"it+ )' te NE 9I and SN #)nne#tiit+:.

Retriee a "ist )' VLANs de'ined )n te A%S 9&er -)de:.

Sear# wi# VLANids are sti"" aai"a6"e.

?. )( ae a er+ "arge netw)r3. Te NEs are )rganied in a ")t )' di''erent

')"ders")#ati)ns. )( ad t) g) awa+ ')r a wi"e. )( want t) ae a 'ast iew

)n a"" te s(&erised NEs in te netw)r38 wi# ae #riti#a" and -a)r

a"ar-s.

&N view First $a!e a %lat view via iews 3 ayout - Flat. This way

all the Ns are visi#le on the screen.

Then create the appropriate %ilter via iews 3 Filter &dd condition -

select &lar$ tatus - "s at least - $a:or. 4"% you select A&lar$ tatus is

e>ual to $a:orA, you have to select a si$ilar condition %or critical alar$s

and you have to select A$atch any o% the %ollowingA.6

2. At a #ertain -)-ent8 te de#isi)n as 6een -ade t) re&"a#e a"" EBLTCF

6)ards. As an )&erat)r8 +)( need t) 3n)w wi# NEs need t) 6e isited 6+ a

'ie"d engineer. Retriee a"" te NEs #)ntaining EBLTCF 6)ards.

elect all the supervised Ns and go to iews 3 Find 3 Boards.

elect the correct type 4in the colu$n installed #oards6 and the result will

#e shown in a new window.

$. C(st)-er S-it #a""s te e"&des3 9+)(:. He as s)-e &r)6"e-s wit is

#)nne#ti)n. )( d)nt 3n)w t) wi# ASA e is #)nne#ted. H)w #an +)(

,(i#3"+ 'ind te &)rt )' tat #(st)-er@

&N view 4select one or $ore Ns6iews 3 Co to port #y custo$er

'hen the &&+ is not supervised or isolated, the option Ago to port #y

custo$erA is grayed out.

;e$ar! the ad$inistrator can disa#le this option. 4&d$inistration -

)usto$iation - yste$ Tuning6. ee &dvanced &' (perator course.


7/32

2



5. Ce#3 te I #)nne#tiit+ 6etween te A%S and +)(r NE.

&N view, select N N 3 ;eacha#ility test

. St)& te s(&erisi)n )n te NE and tr+ again. %at a&&ens and w+@

&N view, select N N 3 upervision 3 top. The N is still

reacha#leD topping the supervision only stops the $anage$ent and no

alar$s are reported #ut the connection is not lostD

7. H)w -an+ Residentia" Bridge VLANs are #reated )n te A%S@

&N view ervice *e%inition how 4elect ;B &N6

/. Is VID ?0? sti"" 'ree@ Is tere n) VLAN wit VID ?0? )n te A%S@ 9H)w d)

+)( 'ind a "ist )' a"" 'ree VLAN IDs@:

&N viewervice ?tilities Cet Free &Ns



8/32

2



License Key of 5523 AWS

A'ter #)-&"eting tese assign-ents8 +)( wi"" 6e a6"e t)1

Identi'+ te &"a#e were t) ada&t te "i#ense 3e+s

Retriee "i#ense rigts and a#t(a" (sage

?. ;nti" wat date is +)(r "i#ense ')r A%SC4RE a"id@

%at is te )st ID )' te A%S@

Co to &d$inistration 3 +aintenance - icense and select &'-)ore to

see $ore details 4a.o. validation period and host id6.

2. H)w -an+ ADSL2 "ines d)es te "i#ense a"")w t) 6e #)n'ig(red@ And

)w -an+ ADSL2 "ines are #(rrent"+ in (se@Co to &d$inistration 3 +aintenance - icense and select &*2= to

see $ore details 4a.o. nu$#er o% lines allowing &*2=6.

$. Is te n(-6er )' (sed &)rts a''e#ted wen +)( st)& s(&erising an NE

tat as #)n'ig(red EBLT 6)ards@Co to &d$inistration 3 +aintenance - icense and select &'-)ore to

chec! the nu$#er o% used ports. Then go to the &N view and stopsupervising an N with con%igured BT #oards. &%ter that you chec!

the license usage again. The nu$#er o% used ports will have decreased.


9/32

2



Basic equipment setup With the Alcatel 5523 AWS

And with the full CLI

A'ter #)-&"eting te assign-ents in tis #a&ter8 te trainee wi"" 6e a6"e t)

#)n'ig(re and retriee in')r-ati)n )n1

r)'i"es

)rts and #)nne#ti)ns

ST

LAC

A"#ate" 552$ A%S 9$L 00$2uip$ent

2 Tere is n) wa+ tat +)( #an &+si#a""+ g) t) te ISA. H)w d) +)( 3n)wte H% ersi)n )' te se"' tat +)( are w)r3ing )n@ 9ASSJ8 ALTSJ8 K :

&'

16 Co to +-?+ o% the "&+. )lic! on u#rac! su#-$enu.Coto

how.The E' version o% the shel% is displayed next to /*etected Type.

ia Full )" The co$$and $show e%ui!ment shef&gives you error-

status no error. This $eans that the con%igured shel% and the installed

shel% $atch.

To see the con%igured shel% enter the co$$and $ show e%ui!ment shefdetai&or $ show e%ui!ment shef #'# detai or $confi(ure e%ui!ment shef#'# info detai& or$info confi(ure e%ui!ment shef #'#&)

3FL 00324 AAAA WHAAA Ed01 Alcatel-Lucent University *

(#:ectives ;e%erences ;etrieval o%

e>uip$ent

in%or$ation


10/32

2



3 %it)(t g)ing &+si#a""+ t) te se"'8 )w #an +)( see i' tere is an NT I4inserted in te ISA@

ia &' Co to +-?+ shel% view, on the C?" you can

i$$ediately see whether an NT "uip$ent slot ;ac!


11/32

2



As. the teacher which /oard and !orts touse for the retrie0a exercises1

1. %i# DSL "ine &r)'i"es are &resent )n te ISA@

Both xdsl spectru$ pro%ile as xdsl service pro%ile exist.

ia &' Co to +-?+ view. Co to con%iguration pro%iles

show.

ia Full )" the co$$and /show xds !rofies&gives you the next

availa#le index that you can use to con%igure a new pro%ile. But you do not

see how $any pro%iles are actually created. 'hen the next availa#le index

is e.g. G, it doesnt $ean that index 8 is not yet created.

"% you want to see the pro%iles created, you need to go via the co$$and

/confi(ure xds info . This co$$and gives you all the pro%iles created onthe "&+ #ut also all the xdsl-ports con%igura#le at this stage."ndex H %or service pro%ile and spectru$ pro%ile indicates that the xdsl-line

is not con%igured.

2. %i# &)rts are #)n'ig(red )n +)(r 6)ard@

ia &' Co to +-?+ #oard view. +a!e sure you are in

expanded view. 4== sign6

ia Full )" ?se the $atch 4%ilter6 co$$and . /)on%igureIxdslI in%o J

$atch a%ter exact1


12/32

2



5. %at is te -ini-(- a"ar- seerit+ re&)rted )n +)(r &)rt@

ia &' Co to the +-?+ #oard view. Co to ort how and

activate the Ceneral ta# and chec! the alar$ con%iguration window pane.

"n this window you %ind the $ini$u$ severity reported on your port.

ia Full )" The alar$ severity reporting $ode is con%igured on xdsl-

inter%ace level.

$confi(ure,interface, !ort ,xdsine rac.'shef'sot'!ort info detai&gives you the alar$ severity reported on the port.

M. H)w -an+ AT#)nne#ti)ns are #)n'ig(red )n te DSL&)rt Traininga@

Dis&"a+ a "ist )' a"" VVCs (sed )n +)(r &)rt. H)w did +)( 'ind tis

in')r-ati)n@

ia &'*ou#le clic! on a custo$er port. This way the port-view

window appears. Eere you can count the nu$#er o% &T+ connections.

The connection tag 46 on the #oard view window doesnt give you an

indication on the nu$#er o% connections.

ia Full )" $show , atm , interface #'#'sot'!ort&4to see the nu$#er6

$confi(ure ,atm, info match exact rac.'shef'sot'!ort&4to get the list6

. %i# Eternet &)rts are #)n'ig(red )n te ISA@

ia &' Co to the +-?+ #oard view o% the NT-#oard. The 2L

thernet ports availa#le on the "&+ are shown. The ports in the unused

state are not con%igured. &&+ ports and the control port are not

con%igura#le. 7ou can only per%or$ show co$$ands on these ports

ia Full )" thernet port is an inter%ace on the E?B.

$confi(ure,interface, shu/, info match after exact !ort&4otherwise youalso get " inter%aces and vlan inter%aces6. ort type unused, or port type

not $entioned $eans that the thernet port is not con%igured.

ia the co$$and /show inter%ace shu# port you can see the status o%

these ports.

8. %at is te #)n'ig(rati)n )' netw)r3 &)rt ?@

ia &' Co to the +-?+ #oard view o% the NT-#oard. Networ!

port 1 is thernet port 18. )lic! on the port, go to ort how

ia Full )" thernet port is an inter%ace on the E?B .

$confi(ure,interface, shu/,!ort,# info detai&)(r you can enter the co$$and $info confi(ure interface shu/ !ort #detai&ort-Type is e.g. Oout-#and $anage$ent or Onetwor!.

9. )( are n)t a6"e t) &+si#a""+ a##ess te ISA. H)w #an +)( eri'+ i' +)(r

Eternet &)rts are (&@

ia &'Co to the port view o% the NT #oard. &ctive ports are

indicated via a green v-sign 4

6.

ia Full )" thernet port is an inter%ace on the E?B. $show

3FL 00324 AAAA WHAAA Ed01 Alcatel-Lucent University #2


13/32

2



interface shu/ !ort #&4oper-status up6

As. the teacher which /oard and !orts to use for the confi(urationexercises 1

1. Create an EBLTC 6)ard in )ne )' te 'ree s")ts ia te A%SCLI. %at are

te de'a("t settings@ Veri'+ +)(r #)n'ig(rati)n )n CLIA%S.

ia &' Co to the+ ?+ shel% viewoardAcce!t4in case

the #oard is plugged in6.

?seoardCreatewhen the #oard is not plugged in yet.

ia Full )" The co$$and $confi(ure e%ui!ment sot #'#'x !anned

t"!e e/tc&)*e%ault settings are unloc!ed and no power down.

2. C)n'ig(re 2 &)rts8 &)rt and &)rt ?08 )n te 6)ard assigned t) +)( 6+ tetea#er8 s) tat te+ wi"" )&erate in te ')"")wing #)nditi)ns.

4&erati)na" -)de1 ADSL

;&strea- s+n#r)niing at $50 36&s

D)wnstrea- s+n#r)niing at 7 6&s

r)ide #(st)-er id t) +)(r "i3ing

)r )ter &ara-eters 3ee& de'a("t &r)'i"e settings. ;se +)(r )wn &r)'i"esO

C)n'ig(re &)rt wit A%S

#)n'ig(re &)rt ?0 wit CLI

4n"+ &)rt as a -)de- &+si#a""+ #)nne#ted. a3e s(re tat )n tat &)rt te

-)de- s+n#r)niesO

Note: xA!"Lx

To con%igure the xdsl port, %irst the service and spectru$ pro%ile need to#e created on the "&+. (nce they are present on the "&+ they can #e

applied to an xdsl port

ia &' )reate ro%ile Te$plates on the &' 4"n the &N

window6. *ownload the$ to "&+. "&+ considers the$ as pro%iles. To

apply the pro%iles on the port, go to the +-?+ #oard view, select the

port, go to port port con%igure

ia Full )" )on%iguration o% service and spectru$ pro%ile with )"

is done via the co$$and $confi(ure xds ser0ice!rofie's!ectrum !rofie

+index, name +xxxx,&.Now the pro%ile is created with de%ault para$eters. Now you can $odi%y

the para$eters you want.+a!e sure that you activate your pro%ile, otherwise you will not #e a#le to

apply it to an xdsl port.


Basic

con%iguration

o% "&+


14/32

2



Note via the show xdsl pro%iles you are a#le to retrieve the next availa#le

index id that you can use.

(nce the pro%iles are created, apply the$ to your port via the co$$and

/con%igure xdsl line Kport idI service-pro%ile KxI spectru$ pro%ile KyI

Note 'hen con%iguring the xdsl line %or the %irst ti$e, you need to speci%y

service 3 and spectru$ pro%ile together. &%terwards you can $odi%y one o%

the two pro%iles independent o% the other.

The last step is the con%iguration o% the xdsl inter%ace via $confi(ure

interface !ort xdsine +!ort id,&)Eere you con%igure the user id andde%ault alar$ setting o% the port.

rom now on !erform the exercises on the !ort where themodem is connected) 9 !ort x :

G. H)w d) +)( 3n)w i' te -)de- is s+n#r)nied@

ia &'Co to the port view o% the T #oard. ynchronied 4active6

$ode$s are indicated via a green v-sign 46. (therwise, a red cross 46 is

shown.

ia Full )" The co$$and $show interface !ort xds

inerac.'shef'sot'!ort& gives you (perational status o% the inter%ace.Note "t is necessary to chec! this, #ecause the "&+ re$e$#ers the rate

at which the $ode$ synched the last ti$e, even though the $ode$ is not

synched any$ore.

L. %at is te &+si#a" 6it rate at wi# te -)de- is s+n#r)nied@

)r a -)de- #)nne#ted t) an ADSL 6)ard

via &'"n the ort 3 how window on the )hannel


15/32

2



$confi(ure /rid(e !ort +;ac.'Shef'/oard'!ort


16/32

2



?. In wi# wind)w #an +)( 'ind te &r)'i"es &resent at te

A%S@

&N view Te$plates 3 ro%ile 3 how

2. H)w d) +)( 3n)w tat +)(r -)de- is s+n#r)nied@ In wi# wind)w #an

+)( see it@+ view 4port view6 green v-sign or red cross.

$. %ere #an +)( 'ind te &r)'i"es aai"a6"e )n te ISA@ Is tis "ist te sa-e

')r a"" ISAs@

+ view )on%iguration 3 ro%iles 3 how. This list can #e di%%erent

%or other "&+s.


;eview @uestions

&'


17/32

2



Residential Bridge

VLAN setup and end-user setup

A'ter #)-&"eting te assign-ents in tis #a&ter8 +)( wi"" 6e a6"e t)1

Retriee "an in')

Create Residentia" Bridge "an and de&")+ )n 6ridge &)rt

A"#ate" 552$7$02 Basi# 4&erat)r 9$L 00$2


18/32

2



1. %at is te ')rwarding -)de )' VLAN 200 9#r)ss#)nne#t8 6ridged8 K:@

ia &' (n the +-?+ go to views %ind &Ns apply %ilter

on &N id, then clic! on the %ilter #utton

ia Full )" 7ou need to chec! the con%iguration on &&+-)(;

and E?B 4con%iguration needs to #e consistent6. The co$$ands are$Confi(ure 0an id 2-- +enter, info&and /confi(ure 0an shu/ id 2--+enter, info

2. %at are te &)rts 6e")nging t) "an 200 )n te SH;B@ E&"ain wat +)(

see.

&ll &&+ ports #elong to vlan 2HH


on &N id, then clic! on the %ilter #utton. )lic!ing on the show con%ig

#utton gives you a list o% all con%igured ports associated to this &N. The

how &ctual #utton gives you a list o% all the ports associated to this

&N which are operational.

ia Full )" $confi(ure 0an shu/ id 2--&gives you all con%igured

ports #elonging to vlan 2HH.

how vlan shu#-port-vlan-$ap J $atch exact2HH gives you the sa$e

list. To see i% the ports are operational see one o% the previous exercises.

G. %i# ")gi#a" &)rts are ass)#iated t) VLAN 200@




how &ctual #utton gives you a list o% all the ports associated to this

&N o% which the #oard is operational.

ia Full )" ia $Show 0an residentia /rid(e 2--&gives you the

#ridge ports associated to &N 2HH con%igured on #oards that are

operational 4plugged in6.

"% you want to see all the ports associated with that &N 4so also the

ports on #oards extracted, use $confi(ure /rid(e +enter, info&--I you geta lot o% in%or$ation #ut theres no possi#ility to get output per &N via

%ilter.

47ou can con%igure ports on a planned #oard that isnt plugged yet.6

L. E&"ain te t)ta" #)n'ig(rati)n )' te (ser ")gi#a" &)rt VC /$5 )n &)rtTRAININGa.

N)te1 )r te d)wnstrea- ')rwarding8 we ass(-e tat te SH;B 3n)ws te

ACQ )' te end (ser witin te res&e#tie VLANs.



19/32

2



ia &' Co to the +-?+ port view, select the &T+ connection

and go to connection. The logical user port is associated to only 1 &N,

&N 2HH and this is also the de%ault &N. Fra$es accepted %ro$ userside are untaggedD

ia Full )" &N association is de%ined in the con%igure #ridge port

co$$and. ia $confi(ure /rid(e !ort +!ort id, +enter, info detai&the #ridged port is associated to &N 2HH 4"* 2HH6 and there you see

%ra$e type is untagged. "* is also &N 2HH so the &N 2HH is also

the de%ault &N

%at a&&ens wen te end(ser sends a 'ra-e wit VLAN tag 200@

Fra$es are sent to the networ! with &N tag 2HH. +&)-address o% end

user is learned on user logical port.

%at a&&ens wen te end(ser sends a 'ra-e wit VLAN tag $00@

Fra$es are deleted 3 in ;B.

%at a&&ens wen te end(ser sends an (ntagged 'ra-e@

Fra$es are sent to the networ! with &N tag 2HH. +&)-address o% end

user is learned on user logical port.

%at a&&ens wit a 'ra-e wit VLAN tag 200 #)-ing 'r)- te netw)r3@

"% destination +&)-address is learned on user logical port, the %ra$e is

sent towards end-user untagged.

%at a&&ens wit a 'ra-e wit VLAN tag $00 #)-ing 'r)- te netw)r3@ogical port is not $e$#er o% &N GHH so %ra$es are deleted.

ia &' Co to the +-?+ port view, select the &T+ connection

and go to connection &N association ;esidential Bridge

&N how con%iguration. "n the Bridge ort window pane there is a

%ield +ax Nu$#er o% +&) &ddresses.

ia Full )" &N association is de%ined in the con%igure #ridge port

co$$and. ia $confi(ure /rid(e !ort +!ort id, +enter, info detai&youcan see $ax-unicast-$ac.

?. Ce#3 te ACaddress "earned )n +)(r 6ridged &)rt(singA%S and CLI.

ia &' Co to the +-?+ port view, clic! on the #ridged port,

go to connection --I +ac &ddresses --I how

ia Full )" $show 0an /rid(e!ort +!0c id,&

3FL 00324 AAAA WHAAA Ed01 Alcatel-Lucent University #*


20/32

2



Clo#al ervice


21/32

2



Cross-connect.VLAN setup and end-user setup


Disting(is 6etween te di''erent #r)ss#)nne#t -)de"s

;nderstand te ingress')rwardingegress -e#anis-e

Create #r)ss#)nne#t "ans and Mass)#iati)ns ia CLI and A%S

A"#ate" 552$7$02 4&erat)r 9 $L 00$2>A ED02 :

A"#ate" 552$ A%S1 #(st)-er d)#(-entati)n

Perform these exercises on the /oard and !orts assi(ned to "ou todo the retrie0a exercises)

1. %at is te ')rwarding -)de )' VLAN $$$ 9#r)ss#)nne#t8 6ridged8 K:@

Ce#3 wit A%S and CLI.


on &N id, then clic! on the %ilter #utton

ia Full )" 7ou need to chec! the con%iguration on &&+-)(;

and E?B 4con%iguration needs to #e consistent6. The co$$ands are

$Confi(ure 0an id 333 +enter, info&and /confi(ure 0an shu/ id 333+enter, info

2. %at are te &)rts assigned t) VLAN $$$ )n te ASAC4RE and )n te

seri#e (6 . E&"ain wat +)( see.&N GGG is )-&N )ross connect $ode 4&N association )ross-

connect, tac! type unstac!ed )-&N6.

This $eans that only one user is associated to one &N. (n the &&+-

core this $eans that only one logical port is #ridged towards this &N.

(n the ervice hu# it $eans that $axi$u$ one &&+-lin! or one

directly connected end user 4thernet user6 is connected to this &N.

+ultiple Networ! ports can #e assigned to this &N.




how &ctual #utton gives you a list o% all the ports associated to this&N which are operational.

3FL 00324 AAAA WHAAA Ed01 Alcatel-Lucent University 2#

(#:ectives ;e%erences )ross-connect

+ode retrieval

exercises


22/32

2



ia Full )" $confi(ure 0an shu/ id 333&gives you all con%igured

ports #elonging to vlan GGG.

how vlan shu#-port-vlan-$ap J $atch exactGGG gives you the sa$e

list. To see i% the ports are operational see one o% the previous exercises.

G. Is tere a seri#e de'ined )n te A%S ')r an+ )' te #r)ss#)nne#t -)des@

E&"ain ')r wi# #r)ss#)nne#t -)de tis is (se'(" and w+.

ia &' The only service de%ined on the &' %or cross-connect

%orwarding $ode is the service /stac!ed &N. ervice de%ined to ease

con%iguration o% the -&Nue per logical port.

"n case o% -&N


23/32

2



Resetting the Alcatel 7302 ISAM.

Te A%S #an )n"+ a##ess te ISA )n#e I #)nne#tiit+ as 6een esta6"ised

6etween te A%S and te ISA.


Retriee I and )ter -anage-ent re"ated in')r-ati)n

#)n'ig(re te ASAs I settings ia te CLI

de"ete#reate an ISA in te ANEL iew )' te A%S

#)n'ig(re te ISA "a+)(t in te EL iew )' te A%S

9(n:s(&erise an ISA

A"#ate" 552$7$02 Basi# 4&erat)r 93FL 00324 _B AAAA WBZZA ED02

:

A"#ate" 552$ A%S1 #(st)-er d)#(-entati)n

Perform the exercises with CLI and AWS where !ossi/e


(#:ectives ;e%erences

;esetting the

GH2 "&+ uently re$ove all pro%iles, custo$ers and

other con%iguration %ro$ the "&+.

2. Bring te ISA 6a#3 (& wit a"" &ara-eters re,(ired t) -a3e s(re tat +)(

#an s(&erise te ISA again wit te A%S. Re#reate te ISA and 6ring itt) te s(&erised state. )"")w tese re,(ire-ents1

%e re&resent an )&erat)r wit e,(i&-ent insta""ed in Be"gi(-. %e want t)

w)r3 in a wa+ tat )(r ISAs are gr)(&ed &er &r)in#e. %e diide ea#

&r)in#e in a ")gi#a" n)rt and s)(t regi)n.

;se te ")#ati)ns n)rt )' Antwer& and s)(t )' L(e-6)(rg. As3 te

tea#er wi# ")#ati)n t) (se.

Re#)n'ig(rati)n )' I &ara-eters

16 etup +anage$ent " &ddress 4here "&+ " R 12.G1.9.15P 6

#)n'ig(re s+ste- sing"e&(6"i#i&

#)n'ig(re s+ste- -anage-ent )sti&address -an(a"1 ?72.$?.7.?5J2

13 7302 5523 Operator Feedback

Documents