12.水中溶接継手の試験検査 ※1 宮 森 勝 弥 村 井 徹 被覆アーク溶接法による水中溶接は実際の工事に用いられているが、特殊な環境で施工されるために、陸上のものに比 し、強度的 にやや劣 る ものと思 わ れる。また実際 に海中で 行 われた試 験結果 も公表 さ れた もの が少ない。そこ で現 在行 わ れ ている水中溶接の強度的信頼性を調査することを目的として、水深約4mの海中で板厚12mmの軟綱板を下向き、横向き、 立向きの姿勢で突き合せ溶接したものについて、X線検査、強度試験、顕微鏡観察等を行った。 以上の諸試験より、外観が良好でも内面にブローホール等の欠陥が発生すること、引張り強度は母材の80%以上となり 好結果を示すが伸びが毋材の1/3~1/2 になること等が判明した。 Test Results of Underwater Welding Katsuya MlYAMORI *4,Tohru MURAI * s The strength reliability of an underwater welding using conventional welding rods was studied. Mild steel plates of 12mm thickness were welded in 4 meters depth of water for three different attitudes including of that horizontal and vertical. A series of X-ray inspections and mechanical tests for the welds indicated that many blow-holes were concealed inside the welding beads of good appearances, and that tensile strength and elongation of the welded specimens were more than 80 percent and less than 50 percent of parent metal respectively. まえがき 近年海洋工事がさかんになり、水中溶接の分野に おいても数多くの基礎研究やプラズマ溶接、水ジェ ット局部乾式水中溶接等の試みがなされている。こ れらは新しい海洋構造物の建造方法を生み出すもの と期 待 されてい る。 ダイバ ーによ る被覆 アー ク溶接 法は古くから沈船引上げ、船舶の応急修理、護岸工 事等に用いられている。これらの溶接施工法は陸上 と同じイルミナイト系、あるいはチタニア系の溶接 棒に防水加工を行い、直流の溶接機によって行われ ている。悪条件の環境下であるため、ブローホール、 スラグ巻込み、硬度の増加、アンダーカット等の欠 陥が発生して、陸上のものに比し強度的にやや劣 る と思われる。水中溶接継手の実験室的な研究は数多 く公表されているが、ダイバーが実際に海中で行っ たものの試験結果の公表は少ない。本報告は水深4 mの海中で板厚12mm の軟鋼板に下向 き、横向 き、立 向きの姿勢で突合せ溶探したものについて、X線検 査、強度試験、顕微鏡検査を行ったものである。な お、継手部の試験は石川島播磨重工㈱に衣頼した。 2. 目 的 現在実際に行われている水中溶接工事の強度的信 頼性 を調査 して、水中溶接研究の資料 を得 る。 3. 方法 3.1 溶接継手試験板 試験板は溶接は水深約4mの海中で、それぞれイ ルミナ イト系 B-10 とチ タニ ヤ系 B-33 を用いて行 former; Manned Undersea Technology & Engineering Department (present; Ishikawajima Harima Heavy Industries, LTD.) Manned Undersea Technology & Engineering Department ゛1本研究は、科学技術庁研究調整局 から委託を受 けた「海中作業基地による海中実験研究(シート ピア計画)」の一環として実施 した ものである。 - ’21前潜水技術部(現石川島播磨重工業㈱) 潜水技術部
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.