-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
1/21
2009 Toyota Truck Highlander 4WD V6-3.3L (3MZ-FE) HybridVehicle
> Body and Frame > Interior Moulding / Trim > Dashboard /
Instrument Panel > Service and Repair > Removal and
Replacement > Instrument PanelSafety Pad
REMOVAL
: INSTRUMENT PANEL SAFETY PAD: REMOVALINSTRUMENT PANEL
REMOVAL
1. PRECAUTION See: Dashboard / Instrument Panel >
Vehicle Damage Warnings > Precaution 2. POSITION FRONT
WHEELS STRAIGHT AHEAD 3. DISCONNECT CABLE FROM NEGATIVE
BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the terminal to
prevent airbag deployment .
See: Air Bag Systems > Vehicle Damage Warnings
>Precaution
NOTE: When disconnecting the cable, some systems need to be
initialized after the cable is reconnected See: Vehicle >
Programming and Relearning >Repair Instruction -
Initialization.
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Air
Bag > Removal and Replacement > Removal 5. REMOVE
LOWER NO. 2 STEERING WHEEL COVER See: Air Bag > Removal and
Replacement > Removal 6. REMOVE STEERING PAD See: Air
Bag > Removal and Replacement > Removal 7. REMOVE
STEERING WHEEL ASSEMBLY See: Steering Wheel > Removal and
Replacement > Removal 8. REMOVE STEERING COLUMN COVER
See: Steering Column > Removal and Replacement >
Removal 9. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL
CABLE SUB-ASSEMBLY See: Steering Column > Removal and
Replacement > Removal10. REMOVE INSTRUMENT CLUSTER FINISH
PANEL ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
2/21
(a)Disengage the 4 claws and 4 clips,
and remove the instrument cluster finish panel
assembly.11. REMOVE COMBINATION METER ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
3/21
(a)Remove the 4 screws
[E]. (b)Disconnect the connector and remove
the combination meter assembly.12. REMOVE CENTER INSTRUMENT
PANEL REGISTER ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
4/21
(a)Apply protective tape to the areas
shown in the illustration. (b)Using a
moulding remover, disengage the 2 claws and 5 clips, and then
remove the center instrument panel register assembly as shown in
theillustration.13. REMOVE CENTER INSTRUMENT CLUSTER FINISH
PANEL ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
5/21
(a)Apply protective tape to the areas
shown in the illustration. (b)Using a
moulding remover, disengage the 10 claws and 8 clips starting from
the upper part of the center instrument cluster finish panel
assembly.
NOTE: Do not pull on the small storage compartment lid. Doing so
may cause damage.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
6/21
(c)Disconnect each connector and remove
the center instrument cluster finish panel assembly.14. REMOVE
HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning
System) See: Control Assembly, HVAC > Removal andReplacement
> Removal15. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for
Automatic Air Conditioning System) See: Control Assembly, HVAC >
Removal and Replacement >Removal16. REMOVE RADIO RECEIVER
ASSEMBLY WITH BRACKET (w/o Navigation System) See: Radio/Stereo
> Removal and Replacement > Removal17. REMOVE NAVIGATION
RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) See:
Navigation System > Removal and Replacement >
Removal18. REMOVE FRONT DOOR SCUFF PLATE LH See: Headliner
> Removal and Replacement > Removal19. REMOVE COWL SIDE
TRIM SUB-ASSEMBLY LH See: Headliner > Removal and Replacement
> Removal20. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
SUB-ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
7/21
(a)Remove the 2 bolts
[B]. (b)Disengage the 3 claws and 10
clips.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
8/21
(c)Disconnect each connector and the
aspirator duct. (d)Disconnect the hood lock
control cable assembly and remove the lower instrument panel finish
panel sub-assembly.21. REMOVE FRONT DOOR SCUFF PLATE RH See:
Headliner > Removal and Replacement > Removal
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
9/21
22. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH See: Headliner
> Removal and Replacement > Removal23. REMOVE NO. 2
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a)Disengage the 3
claws. (b)Disengage the 2 guides and remove
the No. 2 instrument panel under cover sub-assembly.24. REMOVE
LOWER INSTRUMENT PANEL SUB-ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
10/21
(a)Remove the 2 bolts [B] and 3 screws
[E]. (b)Disengage the 4 claws and 3
clips. (c)Disconnect each connector and
clamp, and remove the lower instrument panel sub-assembly.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
11/21
25. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
(a)Disengage the 4 claws and 4
clips. (b)Disconnect the connector and
remove the upper console panel sub-assembly.26. REMOVE NO. 2
CONSOLE BOX DUCT (w/o Rear Air Conditioning System)
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
12/21
(a)Remove the No. 2 console box duct as
shown in the illustration.27. REMOVE LOWER REAR CONSOLE BOX
See: Console > Removal and Replacement >
Removal28. REMOVE CONSOLE BOX ASSEMBLY (w/o Rear Air
Conditioning System) See: Console > Removal and Replacement >
Removal29. REMOVE CONSOLE BOX ASSEMBLY (w/ Rear Air
Conditioning System) See: Console > Removal and Replacement >
Removal30. REMOVE FRONT NO. 1 CONSOLE BOX INSERT
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
13/21
(a)Using a clip remover, remove the 2
clips. (b)Remove the 3 screws
[E]. (c)Disengage the claw and 2 guides, and
then remove the front No. 1 console box insert.31. REMOVE
FRONT NO. 2 CONSOLE BOX INSERT
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
14/21
(a)Using a clip remover, remove the
clip. (b)Remove the 3 screws
[E]. (c)Disengage the claw and 2 guides, and
then remove the front No. 2 console box insert.32. REMOVE
POWER SWITCH See: Ignition Switch > Removal and Replacement >
Removal33. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
See: Headliner > Removal and Replacement >
Removal34. REMOVE FRONT PILLAR GARNISH LH See: Headliner >
Removal and Replacement > Removal35. DISCONNECT FRONT DOOR
OPENING TRIM WEATHERSTRIP RH See: Headliner > Removal and
Replacement > Removal36. REMOVE FRONT PILLAR GARNISH RH
See: Headliner > Removal and Replacement >
Removal37. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL
SUB-ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
15/21
(a)Disengage the 2 claws and 2
clips. (b)Disengage the 2 guides and remove
the No. 1 instrument panel speaker panel
sub-assembly.38. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for LH
Side) See: Speaker > Removal and Replacement >
Removal39. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL
SUB-ASSEMBLY
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
16/21
(a)Disengage the 2 claws and 2
clips. (b)Disengage the 2 guides and remove
the No. 2 instrument panel speaker panel
sub-assembly.40. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for RH
Side)
HINT: Use the same procedures for the RH side and the LH
side.
41. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY See: Air Bag
> Removal and Replacement > Removal42. REMOVE INSTRUMENT
PANEL SAFETY PAD ASSEMBLY (a)Disconnect each
connector. (b)Remove the 2 passenger airbag
bolts [A]. (c)Disengage each clamp.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
17/21
(d)Remove the 2
clips. (e)Remove the 2 bolts [D] and nut
[G]. (f)Disengage the 5 claws and remove the
instrument panel safety pad assembly.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
18/21
43. REMOVE NO. 3 INSTRUMENT PANEL
STAY (a)Using a screwdriver, disengage the
claw and remove the 5 No. 3 instrument panel stays as shown in the
illustration.
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
19/21
44. REMOVE CONSOLE BOX CUP HOLDER
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
20/21
(a)Remove the 2 console box cup
holders.45. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
(a)Remove the 4 screws [F] and the
instrument panel cup holder assembly.46. REMOVE NO. 2 CONSOLE
BOX CUP HOLDER
-
11/22/2017 Removal (Dashboard / Instrument Panel) - ALLDATA
https://my.alldata.com/repair/#/repair/article/45491/component/2103/itype/401/nonstandard/1275656
21/21
(a)Remove the No. 2 console box cup
holder.