Frontansicht
Anschlüsse
Legende 1 Statusanzeige 2 Ethernet (X2, X3) 3 USB (X4) 4 RS-485
/ CAN2 "X7" 5 RS232/CAN1 (X8) 6 Stromversorgung (24 V DC -15% +20%)
(X9)
Elektrostatisch gefährdete Bauelemente: Anschlusskontake der
Steckverbinder nicht mit den Fingern berühren.
Anwendungsbereich Ventura Vico/Scout ist ein Bedien- und
Anzeige-Gerät und als Betriebsmittel zum Einsatz in industrieller
Umgebung konzipiert. Andere Anwendungen erfordern Rücksprache mit
dem Werk. Bei nicht bestimmungsgemäßem Einsatz und eventuell
hieraus resultierenden Schäden haftet der Hersteller nicht. Dies
gilt auch für den Einsatz in Netzwerken, die durch den Anwender
unzureichend gegen nicht autorisierten Zugriff gesichert sind. Das
Risiko trägt allein der Anwender. Zur bestimmungsgemäßen Verwendung
gehört auch das Beachten der Betriebsanleitung.
Inbetriebnahme Beim Betrieb elektrischer Geräte stehen
zwangsläufig bestimmte Teile unter gefährlicher Spannung. Arbeiten
an elektrischen Anlagen oder Betriebsmitteln dürfen nur von einer
Elektrofachkraft oder von unterwiesenen Personen unter Anleitung
und Aufsicht einer Elektrofachkraft den elektrotechnischen Regeln
entsprechend vorgenommen werden.
Montage Einbaumaß: 298 mm x 241 mm
Eine vollständige Einbauzeichnung und Bedienungsanleitung als
PDF finden Sie im Internet unter www.kuhnke.com. "DOWNLOAD".
Bedienungsanleitung
Ventura Scout E 804 D
Range of application Ventura Vico/Scout is a HMI with for the
control of operating and monitoring actions in industrial areas.
For other applications, please consult us. KUHNKE is not liable for
any possible damages resulting from use in other than the
designated applications. The same applies to utilization in
networks the user has insufficiently secured against unauthorized
access. Such risk lies entirely with the user. Observance of the
operation instructions is considered as part of the units’
designated use.
Commissioning (electrical connection) During electrical
operation certain parts inevitably carry lethal voltages. Work on
the electrical system or equipment must only be carried out by a
skilled electrician himself or by specially instructed personnel
under the control and supervision of such an electrician and in
accordance with the applicable electrical engineering rules.
Assembly Front Panel Opening: 298 mm x 241 mm
For a complete pdf-type installation drawing and manual, browse
for the "DOWNLOAD" section at www.kuhnke.com.
Operating Manual
Ventura Scout E 804 GB
10175287 01.08.2013
Ventura Scout / Vico 1205
Embedded Panel PC Embedded Panel PC
deutsch english
Kuhnke Automation GmbH & Co. KG • Lütjenburger Straße 101 •
D - 23714 Malente • www.kuhnke.com
4/4 10175287 / 01.08.201
deutsch english
10175287 01.08.201 1/4
Front view
Connections
Legend
1 status display 2 Ethernet (X2, X3) 3 USB (X4) 4 RS-485 / CAN2
"X7" 5 RS232/CAN1 (X8) 6 Power Supply (24 V DC -15% +20%) (X9)
Electrostatically endangered components: Do not touch the
connection contacts of the plug/socket connectors.
1 2 3 4 5
6 1
USB-Schnittstelle "X4", "X5" Spezifikation USB 2.0 (host)
high speed Anschluss Stecker Typ A
RS-485 / CAN2 "X7" Protokoll DSP 301 Übertragung 50 - 1000
kbit/s Anschluss Federzug
Pin Funktion 1 RS-485_L 2 RS485_H 3 RS-485_GND 4 CAN_H 5 CAN_L 6
CAN_GND
Serielle Kommunikation "X8" Anschluss Federzug
RS-232
Pin Funktion 1 RXD 2 TXD 3 GND 4 Shield 5 Shield
CAN1, DSP 301 (50 - 1000 kbit/s)
Pin Funktion 6 CAN_H 7 CAN_L 8 CAN_GND 9 CAN_H 10 CAN_L
Integrierte digitale I/O "X10" Anschluss Federzug
X10 Pin Funktion 1 0V GND (extern) 2 DO3 3 DO2 4 DO1 5 DO0 6 24V
DC (extern) 7 DI3 / INT0 8 DI2 9 DI1 / AN1 10 DI0 / AN0
Einbaumaße Breite (A) 298 mm Höhe (B) 241 mm
USB Interface "X4", "X5" Specification USB 2.0 (host)
high speed Connection Plug Type A
RS-485 / CAN2 "X7" Protocol DSP 301 Transmission rate 50 - 1000
kbit/s Connection spring loaded
Pin Function 1 RS-485_L 2 RS485_H 3 RS-485_GND 4 CAN_H 5 CAN_L 6
CAN_GND
Serial Communication "X8" Connection spring loaded
RS-232
Pin Funktion 1 RXD 2 TXD 3 GND 4 Shield 5 Shield
CAN1, DSP 301 (50 - 1000 kbit/s)
Pin Funktion 6 CAN_H 7 CAN_L 8 CAN_GND 9 CAN_H 10 CAN_L
Integrated digital I/O "X10" Connection spring loaded
X10 Pin Function 1 0V GND (extern) 2 DO3 3 DO2 4 DO1 5 DO0 6 24V
DC (extern) 7 DI3 / INT0 8 DI2 9 DI1 / AN1 10 DI0 / AN0
Front Panel Opening Width (A) 298 mm Height (B) 241 mm
Funktion
Ventura touch ist ein neuer Bedien- und Anzeige-Gerät, der über
ein hochwertiges und langlebiges TFT-Display verfügt. Die Front ist
in Schutzart IP65 ausgeführt.
Systemdaten
Bauart: Gerät für Fronttafeleinbau Displaytyp: TFT mit LED
Hintergrundbeleuchtung Auflösung: VGA, 800x600 Helligkeit: 400
cd/m² Lebensdauer der Hintergrundbeleuchtung: 50.000 h (50% max
Helligkeit) Touchtyp: 4-Draht analog resistiv Prozessor: CPU Marvel
PXA, 1,1GHz RAM 128 MB (256 MB) Laufwerke: Flash disk 512 MB, SD-
Card Slot Betriebssystem: WinCE 6.0 Serielle Schnittstelle: RS232,
galvanisch isoliert USB-Schnittstelle: 2 x USB 2.0 Netzwerke: 2 x
Ethernet 10/100Mbit – RJ45 Versorgungsspannung: 24 V DC -15% +20%
Schutzart: IP 20, Front IP 65 Zulässige Umgebungsbedingungen
Lagertemperatur: -25...+70 °C Betriebs-Umgebungstemperatur: 0...50
°C Relative Luftfeuchte: Einbauraum: 5...90 % (bei 25°C) Gewicht:
ca. 1850 g Abmessungen: Breite: 320 mm Höhe: 265 mm Tiefe: 47 mm
Einbautiefe: 43mm
Stromversorgung, "24V DC" "X9" Anschluss 2-polig, Stecker,
2,5mm2
Pin Funktion L+ Versorgungsspannung +24 V DC L- GND
Eine zu hohe Spannung bzw. eine falsche Polarität an den
Anschlüssen kann zur Zerstörung des Gerätes führen.
Funktionserde Eine niederohmige Erdungsverbindung verbessert die
Ableitung von Störungen, die über externe Stromversorgungskabel,
Signalkabel oder Kabel zu Peripheriegeräten übertragen werden.
Anschluss Flachstecker 6,3mm x 0,8mm
Ethernet Netzwerkanschluss "X2", "X3"
Übertragungsgeschwindigkeit: 10/100 Base T Anschluss RJ 45
(Buchse):
Function Ventura Touch is a new HMI with a high-quality and long
life TFT display for the control of operating and monitoring
actions. At the front it has IP65 protection.
System data Design: Unit to assembly in operating panel Display
Type: TFT with backlight Resolution: VGA, 800x600 Brightness: 400
cd/m² Life time of backlight: 50.000 h (50% brightness) Touch type:
Analog Resistive Processor: Marvel PXA CPU, 1.1 GHz RAM 128 MB (256
MB) Drives: 512 MB Flash disk, SD card slot Operating system: WinCE
6.0 Serial Interface: RS232, galvanically isolated USB Interface: 2
x USB 2.0 Network: 2 x Ethernet 10/100 - RJ45 Supply voltage: 24 V
DC -15% +20% Protection: IP 20, Front IP65 Permitted ambient
conditions Store temperature: -25...+70 °C Operating environmental
temperature: 0...50 °C Humidity: Installation space 5...90 % (at
25° C), Weight: ca. 1850 g Measurements: Width: 320 mm High: 265 mm
Depth: 47 mm Installation depth: 43mm
Power supply, "24V DC" Connection 2-pole, Plug, 2,5mm2
Pin Function L+ Power supply +24 V DC L- GND
Excessive voltage or a wrong polarity at the connections can
lead to the destruction of the unit.
Function Ground A low-impedance ground connection will improve
the derivation of disturbances which are transferred over external
power supply cables, signal cable or cable to peripherals.
Connection Fast on 6.3 mm x 0.8 mm
Ethernet network connection"X","X3" Transmission rate: 10/100
Base T Connection RJ 45 (Socket):
deutsch english
2/4 10175287 / 01.08.201
deutsch english
10175287 / 01.08.201 3/4