CFP 100GBASE-SR10 850nm 150m Transceiver Module • High-speed core router interlinks and data center aggregation • Test equipment 1 www.fs.com CFP 100GBASE-SR10 850NM 150M TRANSCEIVER MODULE Application • Transmission data rate up to 11.2Gbit/s per channel • CFP MSA compliant • Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links • Up to 11.2Gbps per channel bandwidth, OTU4 compatible • 10 channels 850nm VCSEL array Features CFP-SR10-100G • TX input and RX output CDR retiming • Hot pluggable electrical interface • Power class 1 (<8W max) • Operating case temperature 0°C to +70°C • 3.3V power supply • RoHS 6 compliant(lead free) • 10 channels PIN photo detector array • OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m • MDIO digital diagnostic and control capabilities. • compliant to CFP MSA Management Interface Specification, Draft 1.4
16
Embed
100GBASE-SR10 CFP 850nm 150m Transceiver Module …The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CFP 100GBASE-SR10 850nm 150m Transceiver Module
• High-speed core router interlinks and data
center aggregation
• Test equipment
1www.fs.com
CFP 100GBASE-SR10 850NM 150M TRANSCEIVER MODULE
Application
• Transmission data rate up to 11.2Gbit/s per
channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for
100GBASE-SR10 links
• Up to 11.2Gbps per channel bandwidth,
OTU4 compatible
• 10 channels 850nm VCSEL array
Features
CFP-SR10-100G
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0°C to
+70°C
• 3.3V power supply
• RoHS 6 compliant(lead free)
• 10 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m
and OM4 Multimode Fiber cable of up to
400m
• MDIO digital diagnostic and control
capabilities.
• compliant to CFP MSA Management
Interface Specification, Draft 1.4
Description
2www.fs.com
The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution
supporting 100G Ethernet and PCIe. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10. CFP SR10 modules offer 10
transmit and 10 receive asynchronous channels operating at up to 11.2Gbps per channel.
As shown in Figure 1, the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and
associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10
parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.
CFP 100GBASE-SR10 850NM 150M TRANSCEIVER MODULE
Parameter Symbol Min Typ. Max Unit Ref.
Supply Voltage Vcc -0.3 3.6 V
Input Voltage Vin -0.3 Vcc+0.3 V
Storage Temperature Tst -20 85 ºC
Case Operating Temperature Top 0 70 ºC
Humidity(non-condensing) Rh 5 95 %
Figure 1 – Module Block Diagram
Product Specifications
I. Absolute Maximum Ratings
3www.fs.com
CFP 100GBASE-SR10 850NM 150M TRANSCEIVER MODULE
II. Recommended Operating Environment
Parameter Symbol Min Typ. Max Unit Ref.
Supply Voltage Vcc 3.13 3.3 3.47 V
Operating Case temperature Tca 0 70 ºC
Data Rate Per Lane fd 11.2 Gbps
Humidity Rh 5 85 %
Power Dissipation Pm 8 W
III. Electrical Characteristics
Parameter Symbol Min Typ. Max Unit Ref.
Differential input impedance Zin 90 100 110 ohm
Differential Output impedance Zout 90 100 110 ohm
Differential input voltage amplitude
ΔVin 120 820 mVp-p 1
Differential output voltage amplitude
ΔVout 300 820 mVp-p 2
Input Logic Level High VIH 2 VCC V
Input Logic Level Low VIL 0 0.8 V
Output Logic Level High VOH VCC-0.5 VCC V
Output Logic Level Low VOL 0 0.4 V
Notes:
1.Differential input voltage amplitude is measured between TxnP and TxnN.
2.Differential output voltage amplitude is measured between RxnP and RxnN.
4www.fs.com
Parameter Symbol Min Typ. Max Unit Ref.
Average Optical Power(per channel)
Pout -8 -2.5 1 dBm
Average Optical Power(per channel) - Disabled
Poff -30 dBm
Optical Return Loss Tolerance 12 dB
Extinction Ratio ER 3 dB
Center Wavelength λc 840 850 860 nm
RMS Spectral Width λ 0.5 0.65 nm
Transmitter eye mask Compliant to IEEE802.3ba eye mask specification
Above is part of our test bed network equipment. For more information, please click the Test Bed PDF. It will be updated in real time as we expand our portfolio.
14www.fs.com
II. Performance Testing
CFP 100GBASE-SR10 850NM 150M TRANSCEIVER MODULE
Each fiber optical transceiver has been fully tested in FS Assured Program equipped with world's most advanced analytical equipment to ensure that our transceivers work perfectly on your device.
1. TX/RX Single Quality Testing
Equipped with the all-in-one tester integrated 4ch BERT & sampling
oscilloscope, and variable optical attenuator the input and output signal