Page 1 of 5 NOTE: Graphic files must be @ 150 dpi Finished Size. DO NOT send Flattened Files. Production can not manipulate the content, proportion or color of these files. Product Name: VK-2107 Process: Colossus 8-Color Material: Poly Knit 9 Effective Date: 09/20/13 .75" 1”w x 3/8”h notch on center of top and bottom and 4 corners Finished Size: 91"w x 81.75”h Live Area: 90”w x 80.25”h Sew 1/2” hook Velcro into front perimeter Finished Size: 25.5”w x 81.75”h Live Area: 24”w x 80.25”h Sew 1/2” hook Velcro into front perimeter 3/8”w x 2.5”h notch on left and right side Approx 81.75" 91.00" 90.00" 80.25" .50" 39.25" Sacagawea Backwall Graphic Dims VK-2107 NOTE: These dimensions are for graphic layout purposes. Graphic needs to be cut and test fitted to Sacagawea frame. Backwall Large Section Graphic (Included) Banner Section Graphic (Included) Backwall Tension Fabric Graphic (Included) 25.50" 24.00" 81.75" 80.25" 39.25" 1”w x 3/8”h notch on center of top and bottom and 4 corners Finished Size: 91"w x 81.75”h Live Area: 90”w x 80.25”h Sew 1/2” hook Velcro into front perimeter 81.75" 91.00" 90.00" 80.25" .50" 39.25" Add 1/2” bleed to left and right and 3/4” bleed to top and bottom Add 1/2” bleed to left and right and 3/4” bleed to top and bottom
5
Embed
10-9-14 Sacagawea VK-2107 - Classic Exhibits...Sacagawea Backwall Graphic Dims VK-2107 NOTE: These dimensions are for graphic layout purposes. Graphic needs to be cut and test fitted
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 5
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
Product Name: VK-2107
Process: Colossus 8-Color
Material: Poly Knit 9
Effective Date: 09/20/13
.75"
1”w x 3/8”h notchon center of top and bottom and 4 corners
Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
Finished Size: 25.5”w x 81.75”hLive Area: 24”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
3/8”w x 2.5”h notchon left and right side
Approx
81.7
5"
91 .00"
90 .00"
80.2
5"
.50"
39.25"
Sacagawea Backwall Graphic Dims VK-2107
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
1”w x 3/8”h notchon center of top and bottom and 4 corners
Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
81.7
5"
91 .00"
90 .00"
80.2
5"
.50"
39.25"Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom
Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom
Page 2 of 5
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
7.75
"
9 1.0 0"
11 .00"
56.5
0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
81.7
5"
.
32.5
0"
11 .88 "
6.00"
*Counter
25.00"
Blue Area indicates 3/4” bleed areaaround the counter and the monitor
Product Name: VK-2107
Process: Colossus 8-Color
Material: Poly Knit 9
Effective Date: 09/20/13
Sacagawea Backwall Accessories (Counter/Monitor)
"
7.75
"
9 1.0 0"
11 .00"
56.5
0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
81.7
5"
.
32.5
0"11 .88 "
6.00"
*Counter
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
*NOTE: When adding Monitors and Counters to the Sacagawea unit, portions of the graphic will be covered. Please design graphic layout according to suggested locations.-See Header Graphic Dims for header locations.
Page 3 of 5
Product Name: VK-2107
Process: See Below
Material: See Below
Effective Date: 09/20/13
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
Zipper sewn across top.Seam sides using a 1/2" seam. Test hang on frame.
Product Name: VK-2107
Process: Direct Print
Material: 1/8” Sintra or Plex
Effective Date: 09/20/13
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
A small portion of your graphic(s) may be hidden by monitor and counter. Please use these diagrams to position your graphics correctly.
Sacagawea Wing Dims VK-2107
*Counter
6.0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
11.88 "
32.5
0"
4 .75"
40"
40"
13 "
Convex Wing for T-Series20’ Unit includes (2) Bottom Panels and (2) Upper Panels