1 Understanding Hardware Profiles A hardware profile stores configuration settings for a set of devices and services. Microsoft Windows 2000 can store.

1

Understanding Hardware Profiles

• A hardware profile stores configuration settings for a set of devices and services.

• Microsoft Windows 2000 can store multiple hardware profiles.

2

Creating or Modifying a Hardware Profile

3

Activating a Hardware Profile

• Windows 2000 prompts the user to select a profile during startup.

• If no profile is selected, the default profile is used.

• If there is only one profile, it is automatically used.

• The time delay can be set to 0 to automatically use the default profile.

• To override the default profile, press the Spacebar during the system prompt.

4

Viewing Hardware Profiles Properties

• Display the Available Hardware Profiles list.

• Select a profile, and click Properties.

• This Is A Portable Computer check box is selected if Windows 2000 identifies your computer as a portable unit.

5

Setting Display Properties

6

Using Multiple Displays

7

Performance Options

8

Virtual Memory Manager

9

Virtual Address Space

10

Paging

11

Paging File Size

12

Virtual Memory Warning

13

Registry Size

14

Enhancing Performance

• Create a paging file for each hard disk.

• Move the paging file off the drive containing the Windows 2000 systemroot folder.

• Note: When you install Windows 2000, Setup creates the virtual memory paging file, Pagefile.sys, on the partition (volume) where you installed Windows 2000.

• Set the paging file’s initial size to the Maximum Size value.

15

Environment Variables

16

Startup and Recovery Settings

17

Installing Plug and Play Hardware

• Windows 2000 automatically detects and configures most Plug and Play devices.

• Use the Add/Remove Hardware wizard to initiate automatic installation.

18

Installing Non–Plug and Play Hardware

• Windows 2000 automatically detects and configures many Non–Plug and Play devices.

• Use the Add/Remove Hardware wizard to initiate automatic installation.

19

Add/Remove Hardware Wizard

• The Add/Remove Hardware wizard is located in Control Panel.

• Click Next to close the Welcome page.

• Select Add/Troubleshoot A Device, and click Next.

• The wizard searches for new devices.

20

Choose A Hardware Device Page

21

Confirming Hardware Installation

22

Installing Hardware Manually

• Determine which hardware resources are required.

• Determine the available hardware resources.

• Change hardware resource assignments.

Determining Which Hardware Resources Are Required

• Interrupts

• I/O ports

• Direct Memory Access (DMA)

• Memory

04/18/23 18:02 Windows 2000 Professional / Chapter 4 23

24

Determining the Available Hardware Resources

25

Changing Hardware Resource Assignments

• Use Device Manager.

• Print the contents of Device Manager.

• Device Manager does not change the resources used by a non–Plug and Play device.

• Device Manager changes the device configuration for the operating system.

Configuring and Trouble-shooting the Desktop Environment

• Use the Regional Options icon in Control Panel to Configure Multiple Languages and Multiple Locations.

• Use the Accessibility Options icon in Control Panel to configure Accessibility Options.

• Use icons in Control Panel such as the FAX icon, the Internet Options icon, and the Phone and Modem Options icon to Configure Additional Desktop Settings.

04/18/23 18:02 Windows 2000 Professional / Chapter 4 26