OBD HOST POWER BT OBD HOST POWER BT 'Connect' button Android Quick Start Guide OBDLink MX Bluetooth Android Scan the QR code or visit the URL from your Android device to download the OBDLink app: obdlink.mx/app Download & install OBDLink app The DLC is usually found on the driver’s side, under the dash. – Can’t find your DLC? Visit dlc-locator.com ‘POWER’ LED will turn ON, and the ‘BT’ LED will start flashing slowly. You must complete steps 7, 8, and 9 within 2 minutes. If you need more time, press the button again. Attention! The ‘BT’ LED will switch to a fast blink. Tap ‘Scan’ if OBDLink MX does not show in Avail- able devices. – LEDs are off? Check vehicle for blown fuses. [instructions continue on reverse] Plug MX Bluetooth into the diagnostic link connector (DLC) Turn ignition to Key On, Engine Off position Open ‘Settings’ app, and enable ‘Bluetooth’ Press the ‘Connect’ button on MX Tap ‘OBDLink MX’ to pair the device Tap ‘Bluetooth - Pair with a device’ Wait for OBDLink MX to appear on the ‘Available devices’ list 1 2 3 4 6 8 5 7