01
• CEO Message
• About Us
• History and Evolution
• Business Structure
• International Operations & Our Footprint
• Clients
• Construction
• Fabrication
• Maintenance
• Tanks
• MASCO
• Joint Ventures
• Quality
• Health, Safety and Environment
• Resources
• Training
• Landmark Projects
• Office Locations
- 03
- 04
- 06
- 09
- 10
- 11
- 13
- 17
- 22
- 28
- 30
- 31
- 36
- 38
- 40
- 42
- 44
- 48
Contents
04
Lines of
Business
• Construction
• Fabrication
• Maintenance
Industry
Sectors
• Oil & Gas
• Refineries
• Petrochemical
• Power
• Aluminium
Service
Construction
• EPC Projects
• Civil
• Mechanical
• Electrical & Instrumentation
• Tanks
• Pipelines and Flowlines
• HDPE Lining
Fabrication
• Piping & Equipment
• Exotic Materials
• Aluminium
Maintenance
• Turnaround & Shutdown
• Plant Maintenance
• Workshop Based Maintenance
Training
Special Technical Services LLC (STS), headquartered in The Sultanate of Oman, is a leading
multidisciplinary contracting group specializing in Construction, Fabrication and Maintenance
services for the Energy and Industrial sectors.
STS was established in 1980 as a member of The Oman Oilfield Supply Centre L.L.C. (OOSC)
group of companies, a leading Omani Conglomerate, to provide specialist oil & gas field
maintenance services.
Today, we operate across the MENA region and undertake a diverse portfolio of projects in
several areas of the Oil & Gas Industry such as Field Development, Enhanced Oil Recovery
(EOR), Gas Treatment and Compression, Refineries, Petrochemicals, Tank Farms, Pipelines,
Flowlines, Onplot and Offplot Facilities for the leading Oil & Gas companies. Our in-house
capabilities encompass Civil, Mechanical, Electrical and Instrumentation disciplines with
dedicated teams serving each of these discipline areas.
The mix of intellectual capital, investment in technology, local knowledge, industrial facilities,
fabrication workshops as well as our large fleet of sophisticated construction equipment gives
us a competitive edge.
We have a proven track record of maintaining high safety standards across the business and
have consistently achieved Lost Time Injury frequencies well below the industry average.
In recognition of our dedication to occupational health and safety, we have received several
letters of appreciation and safety awards.
About Us
05
As a reflection of our international quality standards, construction and project management
techniques, STS holds ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 certification.
Our growing and diverse client base is a testament of our ability to conceptualize, manage and
deliver high value & complex projects to the clients’ satisfaction.
For the last 35 years, STS has worked in partnership with its customers nurturing relationships
by providing high quality services focused on delivering & adapting to meet client
expectations. These long lasting relationships and our long term contracting model has been
the basis on which we have maintained a healthy and stable revenue stream.
STS will continue to challenge the status quo and identify new niche markets as well as
strengthen traditional areas of our business with the underlying goal to add value to our
customers and our business.
Commitmentto Quality & HSE
• Committed to HSE & Quality excellence• High calibre team
• Enviable HSEQ records
Focus on Delivery• Execute on time and
on budget• Deliver value for money
to clients• Deliver returns to
shareholders
Project Execution• Experienced Project Team
• Fully developed and proven project implementation
processes• Adapt to changing client
requirements
Over155 Million
Man - Hours In Last 5 Years
Turnover of USD 450 Million
ISO 9001:2008ISO 14001:2004
OHSAS 18001:2007
Over 8,000 Employees – 16
Nationalities
1200 Major Equipments Valued Over
USD 100Million
Our Strengths
19841980 19931987 19951994 1997
Fabrication & Maintenance
Shop established in Al Khuwair
Technical Training
Capability Established
STS
Established
High Density Polyethylene
(HDPE)
Lining Capability Established
Wellhead Maintenance
Capability Established
Fabrication Shop Certified to
ASME – U, U2
Commence Oilfield
Maintenance &
Commissioning Services
Pipeline Maintenance
Services Commence
Oilfield Construction Services
Commence with Mechanical
Capability
ISO
Certification Achieved
06
History and Evolution
2006 20122001 2006 20142010 2013
Expand in-house Construction
Capability to include Civil
Expand in-house Capability to
include Automation and Control
Aluminium Smelter Services
Commence through MASCO
Workshop Established in Sohar
Expand in-house Construction
Capability to include E & I
Workshop Established in
Nizwa (100,000 sqm)
API 6A & 6D
Certification Achieved
Operations Commence in
Bahrain & UAE
New Headquarters Established in
Al Khuwair, Muscat
Oracle’s JD Edwards ERP Suite
implemented
ISO 14001: 2008 &
OHSAS 18001: 2007
Certified by TUV
Aluminium Smelter Services
Expand to Qatar through JV with
Aluref, South Africa – STAREF
Mechanical Interference fit
Capability Established through
Oman Stealth –Lock JV
HDPE Lining Capability
Enhanced through JV with
United Pipeline Systems, USA - USTS
Maintenance Services
Portfolio Enhanced to include
Turnaround & Shutdowns
07
08 09
Business Structure
Business Units International Offices Joint Ventures Subsidiaries
EMC
Projects
Workshops
International Business
Bahrain
UAE
Qatar
Saudi Arabia
STST
USTS
STAREF
MASCO
International Operations & Our Footprint
United Arab Emirates
Bahrain
Kuwait
Algeria
Qatar
Sultanate of Oman
Saudi Arabia
Group HQ: Muscat, Sultanate of Oman
10
Clients
E&C
11
12
STS has a rich and varied experience in execution of challenging projects within critical
timelines and stringent parameters.
We deploy advanced construction methodologies, well-defined systems, softwares and
proven procedures. We have over 1,200 items of equipment, in over 80 categories, with
complete mobilisation across project sites to ensure timely completion.
Oilfield construction is our core capability and we boast of a successful history in executing
both Fixed Term EPC Projects and Long Term Service Contracts. Our in-house capabilities
encompass Civil, Mechanical, Electrical and Instrumentation disciplines besides specialist
fabrication and tank construction with dedicated teams serving each discipline area.
Construction
C
ivil
Mechanical
Instrum
entatio n Electri
cal
• Greenfield &
Brownfield Plant
Construction
• EPC of Tanks
• Oil & Gas Field
Development
• Gas Treatment &
Compression
• Onplot & Offplot
Facilities
• Pipelines & Flowlines
• Enhanced Oil
Recovery (EOR)
• Refinery
• Petrochemicals
Construction
Multi-Discipline Projects
13
Civil Capabilities
Mechanical Capabilities• Piping Fabrication & Erection
Carbon Steel (CS)
Low Temperature Carbon Steel (LTCS)
Stainless Steel (SS)
Duplex Stainless Steel (DSS)
Corrosion Resistant Alloy (CRA)
Glass Reinforced Epoxy (GRE)
Glass fiber Reinforced Plastics (GRP)
Glass Reinforced Vinylester (GRV)
• Structural Steel
• Static & Rotating Equipment Erection
• Pipeline and Flowlines
• Process plant civil works
• Control and switchgear building construction
• Commercial, industrial and residential building works
• Pipeline and flowline civil works
• General earthworks, well pad site preparation and earthmoving
• General maintenance and civil service contracts
• Reinforced concrete structures for industrial and infrastructure projects
• Reinforced concrete structures associated to compressor stations
• Fabrication & Installation of structural steel for pipe rack, pipe supports,
compressor/pump sheds and other tresstles.
14
Electrical Capabilities
Instrumentation Control & Automation Capabilities• EPC of Complete Instrumentation in Oil field services
• Installation of Instrumentation Systems ( PLC, IPS,DCS, F & G, SCADA , WHCP, Flow metering system,
Pressure reduction system, Analyzer with analytical instruments, Instrument cabling work etc)
• Refurbishment, Calibration and Testing of all types of Field Instruments, Control Valves, On / Off
Valves and Testing & Calibration of Safety Valves
• Complete Electrical Works of Substations & Overhead Lines upto 132kV
• Construction Services involving installation and testing
• Testing & Commissioning Services
• Industrial Electrical Works
• Complete Electrical Works of Power Generating Stations
15
16
STS operates two specialized fabrication workshops in Oman, located at Nizwa and Sohar industrial
zones covering a total area of 125,700 sqm.
Our workshops are well equipped with state-of-the-art fabrication & welding machinery and material
handling equipment. Workshop facilities include heavy fabrication bays, vessel fabrication shops,
machine shops, areas dedicated to exotic materials welding and aluminium welding.
We have covered fabrication areas in excess of 24,500 sqm. with effective fabrication height of max.
10.5 m under hook and single lift crane capacity of 100 tons. This includes a 3,000 sqm. of covered
maintenance shop to cater to pump maintenance, machining and valve repair and testing.
Our operations are certified to EN ISO 9001:2008 Quality management system and shops are
approved by Petroleum Development Oman and other major Oil & Gas , Refinery & Petrochemical
companies across GCC.
Fabrication
• Fabrication of HRSG / OTSG – First time in Oman
• Manufactured & Supplied process equipment with more than 40 meter in length
• Delivered more than 15 clad/weldoverlaid vessels
• CRA/SDSS Piping Fabrication for Projects outside Oman
• Supplied more than 30 nos. of ASME Sec. VIII Div. 2, U2 stamped heavy pressure vessels
• Supplied more than 500 skid packages for various applications for the Oil & Gas Industry
• Manufactured & Supplied process skids with more than 9 meter in height
Special Achievements
17
Workshop Facilities and Capabilities
Plot Area : 100,000 Sq. MtrsCovered Area : 15,000 Sq. MtrsO�ce Area : 1200 Sq. MtrsNo of Bays : 6 Nos
Workshop Facilities:
55,000 Std inch Dia./Month or450 MT Vessels & Equipment/ Month
ISO 9001:2008OHSAS 18001:2007ISO 14001:2004ASME Approvals - U, U2 & SNational Board Approvals - NB & RAPI 6A & 6D
Vessels - ASME Div.1- U Stamped/ Div.2 - U2 Stamped. Vessel Strip Cladding Facility2 & 3 Phase Production / Test SeparatorsSkid Packages - MSV Skids / CI Skids/ CSS Manifolds Strainers/ FiltersPiping pre-fabricationOri�ces Plates and Assembly – incl. Multistage Pumps & Valve Maintenance Services
Alloy 625 (Inconel)Alloy 825 (incolloy)Monel 400Hastelloy 6 MoSuper Duplex Stainless Steel Duplex Stainless Steel Stainless Steels 316, 304, 310 Low Alloys P11, P22 & P91Low Temperature Carbon Steel
Current Production Capacity: Certi�cation: Experience in Product categories: Welding Capability:
PMI TestingHardness TestingBoroscope UnitFerritescopeDynamic Balancing MachineTest Bench for Isolation valvesCalibration & Test bench for Relief ValvesPressure & Temp. Recorders
Inspection and Testing Facilities:
Nizwa
Plot Area : 25,700 Sq. MtrsCovered Area : 9,500 Sq. MtrsO�ce Area : 450 Sq. MtrsNo of Bays : 3 Nos
30,000 Std inch Dia./Month or250 MT Vessels & Equipment/ Month
ISO 9001:2008OHSAS 18001:2007ISO 14001:2004ASME Approvals - U, U2 , S, & PPNational Board Approvals - NB & R
OTSG UnitsHRSG UnitsVessels - ASME Div.1- U Stamped/ Div.2 - U2 Stamped2 & 3 Phase Production / Test SeparatorsSkid Packages - MSV Skids / CI Skids/ ManifoldsStrainers/ FiltersPiping pre-fabricationAluminium Bus bar/ other Aluminium FabricationsValves Maintenances / Testing
Alloy 625 (Inconel)Alloy 825 (Incolloy)6 MoSuper Duplex Stainless SteelDuplex Stainless SteelStainless Steels 316, 304, 310Low Alloys P11, 22 & P91Low Temperature Carbon SteelAluminium
PMI TestingHardness TestingTest Bench for Isolation valvesCalibration & Test bench for Relief ValvesPressure & Temp. Recorders
Sohar
Approvals
18 19
Client : PDO
Project : Al Noor Condensate handling Project
Length : 12 Mtr
Width : 3.75 Mtr
Height : 9Mtr
Weight : 50 MT
Multiflash Skid
Client : ORPIC
Project : Sohar Refinery Improvement Project
Diameter : 5 Mtr
Length : 40 Mtr
Weight : 125 MT
Wet Flare KO Drum
20
Manufacturing of Pressure Vessels
Fabrication & Assembly of Process Skids & Modules
Pipe Spool Fabrication
Welding & Fabrication:
500 + Welding procedures using various welding techniques including GTAW, GMAW,
SMAW, SAW, FCAW and Automatic GTAW (Orbital) Welding of exotic materials such as Alloy
625, Alloy 825, 6 Mo, SDSS, DSS, SS316, Low Alloy Steel (P91, P22, P11), Monel , Hastealloy
Maintenance:
(i) Maintenance, Repair and Testing of Pumps, Valves and other industrial machinery
(ii) Machining & Equipment Assembly works
Site Services:
(i) Field Repair and Modification of existing facility including repair of pressure equipment,
(ii) Hot tapping
(iii) Field Tie-ins
Specialized in CRA
Fabrication
Specialized in Modular Skid Fabrication
Cold-roll capacity of
239 mm thick plate
Products meeting
International Quality
Standards
Specialized in Heavy Wall and Clad Equipment
Fabrication
Services Offered
Product List• Pressure Vessels
• Columns / Towers
• Heat Exchangers, Steam Generators (OTSG and HRSG Modules)
• 3 Phase / 2 Phase Separators
• Deaerators
• Scrubbers
• Pig Launchers & Receivers
• Test Separators /Steam Separators
• Fuel Gas Separators / Cyclone Separators
• Multimedia Filters (MMF) / Sand Filters
• Nutshell Filters / Coalescer Filters
• Desalters / Desanders
• Piping pre-fabrication
• Skid packages for Gas Treatment
• Metering Skids
• Cyclic Steam Services Manifolds
• Various Pressure Equipment for Water Treatment Plant
• Storage Tanks of API 650 / EN BS14015 / EN 12285
• Well head hook up skids
• Manifold Skids for Water, Oil and Gas
• Multiport Selector Valves (MSV) skids
• Chemical Injection Skids
• Fuel Gas conditioning skids
• Strainers / Filters
• Orifice plates and Orifice Assemblies
21
STS forte is Plant Maintenance, Turnaround and Shutdown across petrochemical plants
and refineries. Since inception, STS has been providing maintenance services to the
oilfield operators in Oman and carried out successful preventive and breakdown
maintenance campaigns on static and rotating equipment. Our maintenance capabilities
extend to mechanical, instrumentation and electrical disciplines.
Our mission is to provide a quality service that reduces equipment down time, product
deferment and the operating lifetime costs of equipment.
Maintenance
STS started its Turnaround and Shutdown operations in 2007 with the Mina Al Fahal
Refinery Turnaround for ORPIC and has since then continued to strive for excellence in this
arena and has established a core management team to execute such projects. STS has
invested in modern equipment like IBC/OBC (automatic bundle cleaners), hydro jetting
machines, torquing and tensioning tools, retubing tools, bundle pullers to name a few in
order to offer the most efficient services to our clients.
Turnaround & Shutdowns
22 23
STS is a pioneer in oilfield maintenance and was the first Omani Company to be awarded ISO 9002 certification for maintenance of surface and subsurface oilfield equipment. We provide a range of customized services such as maintenance of critical equipment in remote locations, developing maintenancestrategies incorporating RCM, IPF and condition monitoring.
Specialized services like plant commissioning, facility optimization and production operation activities are carried out by our experienced commissioning engineers and operators.
• Wellhead Equipment
Remote Telemetry Units
Control Panels
• Rotating Equipment
Compressor and pump maintenance, gas turbine overhauls
and diesel engine overhauls.
• Electrical Systems
Including generator testing, circuit breaker, transformer,
electrical panel, motor maintenance, relay testing, lighting,
earthing checks and routine battery maintenance.
• Instrumentation Systems
Including preventive maintenance, troubleshooting, loop checking and repair of pneumatic and electronic
analogue systems as well as DCS and gas / liquid analysers, condition monitoring instruments, safe guarding
instrument checks and various types of flow meters.
Plant Maintenance
Major Activities
Instrument repair, testing and calibration service.
24
• Valves
Repair and refurbishment of various types of valves.
• Static Equipment
Preventive and corrective maintenance of various static equipment including Heat
Exchangers, Vessels, Tanks, Separators, Fin-fan Coolers, Heaters, Tray columns.
In-house hot insulation work & Stopaq coating jobs
25
26 27
STS workshop in Nizwa and Sohar are fully accredited by
AIB-Vincotte International with EN ISO 9001-2008 Quality
Systems. Our Nizwa workshop is API 6A accredited for well
head equipment and Christmas Tree and API 6D accredited
for pipeline valves. We have a dedicated covered area of
3000 sqm. for maintenance activities in Nizwa and offer
mobile services for adhoc maintenance activities in the
Sohar Industrial zone.
Our Nizwa maintenance workshop is equipped with
advanced machinery viz., Modern Heavy Duty Lathes,
Universal Milling Machine, Heavy Duty Radial Drilling
Machines and Advance Dynamic Balancing Machine. In
addition, the workshop has a calibration and testing shop
including Test Bench for Isolation Valves & Test Bench for
Relief Valves of any size and large storage, assembly and lay
down area.
We have also provided repair and maintenance services for
ball, gate, globe, butterfly, check valves, relief valves, control
valves and pumps.
• Well Head and Christmas tree maintenance (pertaining to API 6A)
• Pipeline valve maintenance and testing (pertaining to API 6D)
• Pressure and Safety Relief Valve testing / calibration
• Centrifugal Pump and Screw Pump
• Beam Pumps: maintenance, repair, refurbishment and re-installation
• Manufacturing and re-tubing of heat exchangers
• Hydro-testing capacity up to 40,000 psi
• Maintenance, repair and overhaul of all Industrial machinery
• Erection, commissioning and maintenance of overhead EOT cranes
• Remanufacturing of impellers & casing for pumps
• Shaft rebuild & reconditioning
Workshop Based Maintenance
Maintenance Services
25 Years of Experience
Remanufacturing of Pumps & Valve Parts
Highly skilled and Experienced
Team
Dedicated Area of 3000 sqm. for Maintenance
Activities in Nizwa
Internationally Accredited Workshops
Modern and Heavy Duty Machineries
28 00
For over a decade, STS has successfully executed design, procurement, construction, maintenance and repair of steel storage tanks. We have a dedicated team of skilled personnel and specialized equipment to carry out tank design and construction activities in-house whilst maintaining high standards of HSE and Quality.
Services Offered • Design & Construction
• Inspection
• Cleaning and sludge removal
• Repair / replacement of
Roof seals
Bottom plates/ annular plates
Shell plates
Roof, roof plates and roof truss
Piping
Internals
Tanks
DedicatedTeam
Complete Solutions
10 Years of Tank EPC
29
30 00
Aluminium Fabrication & Maintenance Services
MASCO
Majan Aluminium Services L.L.C (MASCO), now a wholly owned subsidiary of STS was incorporated
in Oman in the year 2005 as a Joint Venture with Austin Engineering of Australia.
Today, MASCO is delivering services to the expanding Gulf Aluminium Smelting market specifically
in the fields of:
• Potroom Aluminium busbar fabrication and installation including risers and anode beams
• Anode stem fabrication and refurbishment
• Site installation, live busbar repair procedures and commissioning assistance of busbar systems
MASCO is an ISO 9001: 2008 company and has achieved the Intellectual Property Protection IPP
accreditation to meet client specific requirements.
MASCO's manufacturing facility is based at STS’ 26,000 sqm. workshop in Sohar and is ideally placed
approximately 2 kms. from Sohar port to serve the global aluminium industry.
We have experience in AP35 and DX Technology busbar fabrication including anode stem
fabrication and maintenance services with activities carried out in:
• Sohar Aluminium, Oman
• Emirates Aluminium, UAE
• Alba, Bahrain
Diverse Experience
26,000 sqm. Workshop in
Sohar
Proximity to the port
STS believes in the power of strategic alliances to deliver value added solutions by way of
new and improved technologies. We have formed successful partnerships and brought
industry specific know how to the region.
Joint Ventures
STAREF Mobilizes &
Begin Operations in June 2014
6 YearContract
Awarded in Jan 2014
Refractory &Mechanical
Refurbishment of 704 pots
STAREF is a Joint Venture Company established by STS Oman and Aluref from Richards
Bay - South Africa. The partnership was incorporated in late 2013 to provide specialist
potshell maintenance services to the Qatalum Aluminium Smelter in Qatar which is inclusive
of all refractory and mechanical refurbishment of 704 pots.
STAREF
31
USTS is a Joint Venture between United Pipeline Systems and STS. USTS provides the world’s leading HDPE lining system for protecting pipelines from corrosion and internal abrasion. USTS has completed projects for major companies such as Saudi Aramco, Kuwait Oil Company, Petroleum Development Oman, Occidental Petroleum, Daleel Petroleum. Qatar Petroleum, ADCO.
United Special Technical Services LLC (USTS)
32
Rehabilitating an existing line with Tite Liner is more economical than building a new line.
Advantages of Tite Liner vs Loose Liner: lower material cost, greater resistance to collapse,
higher performance with less liner movement due to expansion and contraction with
operating conditions, excellent hole spanning capability.
Since 1985, our experienced teams have successfully installed over 15,000 km of HDPE
lining ranging from 2” to 52” in diameter and pressure rating up to ANSI 2500 across the six
continents.
Services• Specializing in Pipeline Protection and Rehabilitation Services
• HDPE lining for new and existing pipes
• Tite Liner™, Safety Liner™, Loose Liner
• Rotolining and Shop Lining for fittings
• Freestanding HDPE Piping Systems
• HDPE Sheet Lining
• Pond Lining
USTS Completes highest ever Pressure Tite Liner Project in Kuwait. 150
km pipeline network for 7,500 psi Effluent Water Injection with ANSI
2500 connections. Tested at 528 bar / 7,668 psi.
USTS Completes longest ever Compression Fit Liner Installation in Qatar 24”x 2.5 km. Single Section Offshore Produced Water Pipeline.
• 2014 :
• 2013:
Achievements
33
34
More than 90 Million Man hours (55 months) worked
with an LTI of 0.055
More than 97 Million kms.
Driven with anRTA Frequency 0.10
LEAN for Continuous
Improvement
STST, a Joint Veture between Special Technical Services LLC (STS) and Tebodin & Partner LLC has
been awarded the Engineering and Maintenance Contract (EMC) - North, for 7 years at an estimated
annual turnover of the USD 120 million, by Petroleum Development Oman (PDO).
STST is a joint collaborative set-up to complement the strengths of STS and Tebodin. The JV has
facilitated better synergies and efficiencies for services to PDO.
STST- Special Technical Services & Tebodin L.L.C• Concept Selection
• Front End Engineering Design (FEED)
• Detailed Design (DD)
• Portfolio of medium sized Greenfield and Brownfield
projects (including Infrastructure, GRE pipelines, CS/DSS
pipelines, roads and buildings)
• Preventive, Corrective, Break down and Emergency
maintenance
• Integrity management
• Shutdowns
• Mercury decontamination and hot tapping
• Specialized secondment
• Technical reviews
• Commissioning support
Integrated Support Services
Integrated Engineering
Services
Integrated Maintenance
Services
EPC Projects
The association has harnessed a conducive company culture and leadership bringing high levels of expertise
to the industry. New technologies, Innovative people development initiatives, better financial standing and
better industry practices have emerged as a result of this partnership. With the joint efforts of the stakeholders,
PDO will now gain from better services and value addition.
STST is proud to have an international group of talented personnel to facilitate all tasks in a safe and sound
manner maintaining overall quality at all its operational sites. With over 7,000 employees from 12 nationalities,
STST operates with world-class levels of HSE & Quality.
About TebodinTebodin is one of the leading European providers of multidisciplinary consulting and engineering services. The
company, which generates an annual output volume of €225 million and has 4,900 employees has a network
of around fifty offices in West, Central and Eastern Europe, the Middle East, Asia and Africa. Founded in 1945 in
The Netherlands, Tebodin offers a broad range of engineering services in various markets.
These include general and detailed planning of plants as well as project management, procurement and
construction supervision. Tebodin is based in the Middle East since 1974. Tebodin is part of the international
engineering and services company Bilfinger SE.
ISO 9001: 2008Certified
More than 2,300 Omani
NationalsEngaged
Quality Team consists of more than 100
QA/QC Professionals
Supply Chain Managing more than
500 Vendors
35
Quality
We strive for excellence and are in a constant pursuit of Quality improvement. Our team of highly qualified, experienced and competent quality professionals, IRCA Registered auditors, Welding Specialists, AWS / CSWIP / BGas / ASNT certified inspectionpersonnel cater to the specific needs of Oil and Gas sector projects.
CertificationsOur Quality Management System is set in line with ISO 9001:2008 and , ISO/TS 29001:2010 standards and is certified to ISO 9001: 2008 Standards.
STS fabrication facilities holds ASME ‘U’, ‘U2’, ‘S’ and ‘PP’ stamps Certificates of Authorization for the manufacture of Boilers, Pressure vessels and Power Piping. We also hold ‘R’ Certificate of Authorization from National Board for the repair and alteration of pressure vessels. American Petroleum Institute (API) have certified our facilities for use of API monograms 6A & 6D for the design and manufacturing of Wellhead components and Pipeline Valves respectively.
At STS, we believe
“Right the First Time Right Every Time”.
The Quality Department has established and approved more than 400 welding procedure qualification records.
STS welding procedures cover various types / grades of materials like: Carbon Steel (CS), Low Temperature Carbon
Steel (LTCS), Austenitic Stainless Steel (ASS), Duplex Stainless Steel (DSS), Super Duplex Stainless Steel (SDSS),
Corrosion Resistant Alloy (CRA) (Alloy 625, 825, 6Mo), Low Alloy, Cladding, etc.
Welding CapabilitiesAssurance
Highly Qualified,
Competent and Experienced Professionals
Performance Measurement through KPIs
Certified QMS Facilities for Specific
Products
Welding Capabilities
for Exotic Materials
We monitor the Quality Management System and Product quality performance through Key Performance Indicators (KPIs) and improve the efficiency & effectiveness of our processes by taking timelycorrective/preventive measures. The Quality Assurance department regularly measures and analyses the effectiveness of management systems implementation through a well-planned system of internal quality audits and management reviews.
To ensure the autonomy of Quality functions, STS has established a matrix reporting system whereby QA/QC staff reports to the site managers administratively and Corporate QA/QC Department functionally.
We have successfully executed over 150 million man-hours and road exposure of over 153 million kilometer in last five years.
• HSE Policy
• HSE Vision Statement
• Strategic HSE Objectives
• HSE KPIs
• Heat Stress Management campaign
• Health and Lifestyle campaign
• Hand & Finger Injury campaign
• HAZID / Hazard Hunt Program
• Corporate HSE reporting
• Empowerment to Stop
• Management Inspections & Walkthrough
• Senior Management Incident Review Process
• HSE Workshops
• Corporate HSES Audit program
• New HSE Induction Training Modules
• Environmental Aspects Impact Register
• Incident Loss Accounting
• Six monthly HSE Management Review
• HSE Activity Schedule
• Monthly HSE Score Card
• Client HSE Alliance Forum
• Supervisory competence improvement program
• Employee welfare facilities
At STS we believe Health, Safety and Environment (HSE) is an integral part of our
business. Our business continuity is regularly measured by the way we impact
people, assets, environment and reputation.
Our HSE Management System is certified to OHSAS 18001: 2007 and ISO 14001: 2004
standards, which forms the basis for consistent improvement in the best interests of
our stakeholders.
The company has developed simple yet effective rules based on our learnings from
past incidents. The rules are our ‘HSE Assurance Keys’ which we believe have
tremendous potential to further promote safe HSE culture.
STS has been instrumental in setting the highest safety standards in work-at-height
activities. We are the only contracting company in Oman approved by the
Construction Industry Technical Board (CITB) for imparting training in accordance
with the CITB standards.
Our Road Safety Improvement Team (RSIT) works closely with the drivers and helps
them adopt defensive driving principles as a way of life. The In Vehicle Monitoring
System (IVMS) team is prompt in tracking driver violations real-time and helps
intervene before any mishap takes place.
We have introduced a number of HSE initiatives aimed at increasing management
involvement, employee awareness and understanding of hazards in the workplace.
The initiatives listed are now embedded within our HSE management system.
Health, Safety and Environment
Our systems, programs and procedures adhere to stringent performance standards
which have been customized to unique site requirements and productivity goals. Our
services are designed to:
• Maximize Productivity
• Optimize Plant & Equipment
• Provide 24x7 support at sites
• Improve Financial Bottomline
We follow OEM and DOT specifications to increase the life of vehicles & equipments
there by ensuring that all preventive and corrective measures are done through ECE
norms.
Our central workshop is located at Muscat, Oman with 15 fully equipped workshops
around Oman, Bahrain and Qatar.
We have a highly trained and motivated team, which aims towards providing all
our sites the best service by exceeding the expectations of our customers even in
such a challenging service industry.
Plant & Equipment Exceeding customer expectations and
aiming for excellence
We manage and operate a diverse fleet worth over US $ 100 Million comprising of:
• Heavy construction equipment
• Lifting equipment
• Static equipment
• Heavy tractors and trucks
• Light & Commerical vehicles
With more than 8,000 people from 16 nationalities, we have the cultural diversity that enhances and establishes our commitment to excellence.
Our workforce transcends cultural and ethnic differences to come together as a single cohesive energy that emanates team spirit which is actually palpable at any of our work sites. This team spirit can be seen at work right from the top management, down the line to the work force in the field.
Our work force is motivated by real opportunities for growth and culture of self management with several of the key staff being promoted from within.
Multicultural but Single –Minded
Human Resources
Palpable Team Spirit
Over 8,000 Employees
16 Nationalities
DiverseCultural & Ethnic
Backgrounds
Workforce Empowered
To Take Critical Decisions
Beyond employment, we provide internationally recognised training to empower our local staff with specialized skills and enhance their employment potential.
We passionately believe in empowering our people, giving them significant responsibility early in their careers to accelerate growth and offer ample opportunity to shine.
Regardless of the complexity of work and challenges presented, our workforce is committed to excellence.
• Scaffolding Risk Assessment
• SG 4.15 – Safe Use of Harnesses
• SG 19 – Rescue from Height
• Manual Handling
• TG20:13
• Harness Inspection
Training
Internal Programs
STS prides itself on delivering technical training and development to its employees in its own Technical Training Centers. These centers deliver both internal and internationally recognized training programs.
The training programs are certified through EAL UK for the technical courses, CITB International / PASMA UK for scaffolding courses and ASME for welding courses.
STS success and growth over the years is due to the diligence, hard work and application of our employees. To this end, there are countless examples of the development and growth of talented individuals from their initial roles into higher roles including Supervision and Management.
CITBSafe Erection and Dismantling Of Scaffolds - Part A
Safe Erection and Dismantling Of Scaffolds - Part B
Safe inspection Of Scaffolds (SIS)
Scaffolds Supervisors Course
Diploma in Engineering Maintenance and Installation - Mechanical
Diploma in Engineering Maintenance and Installation - Electrical
Diploma in Engineering Maintenance and Installation - Instrumentation
Diploma in Engineering Maintenance and Installation - Mechanical
Diploma in Engineering Maintenance and Installation - Electrical
Diploma in Engineering Maintenance and Installation - Instrumentation
Diploma in Performing Engineering Operations (QCF)
NVQ 2
NVQ 2
NVQ 2
NVQ 3
NVQ 3
NVQ 3
NVQ 2
Trade
Technicians
Sca�olders
Level
2/3 G & 6G
Trade
ASME Welder Quali�cation Section IX
Level
Welding
• EPC Contract for Amal 1C Plant & HRSG Project, 2015-2018, PDO
• EPC of Amin On-Plot Water Injection Development, 2012-2014, PDO
• EPC of Saih Rawl Permanent PDO Accommodation Complex, 2013-2014, PDO
• EPC of Saih Nihaydha Middle Ghariff Development Project, 2012-2013, PDO
• EPC of Yibal Second Stage Depletion Compressor Project, 2012-2014, PDO
• EPC of Saih Rawl Oil Integrity Piping Replacement Project, 2012-2014, PDO
• EPC of Fahud Control System Upgrade Project, 2008-2009, PDO
• EPC of Mabrouk Field Development Project, 2007-2008, PDO
• EPC Nahada-1 Booster Station, 2006-2008, PDO
Oil & Gas Facility Development – EPC ProjectsLandmark Projects
• Erection, Installation and testing of Electrical works for 120MW Musandam Power Plant, 2016, Wartsila
• Construction for On-Plot Amal Steam Surface Facilities Phase 1C, 2016-2017, PDO
• Piping, Fabrication and Erection works for Sohar Refinery Improvement Project, 2016, Petrofac/Daelim
• Construction and Installation of Well site Facilities - Khazzan Gas Project, 2015-2018, BP Oman
• Procurement & construction of Sur Gas Supply Station, 2012-2013, PDO
• Mauddud Steam Flood Pilot Project, 2012, ProGauge Technologiess / Tatweer Petroleum, Bahrain
• Rubble Steam Pilot Project, 2011, ProGauge Technologiess / Tatweer Petroleum, Bahrain
• Amal Steam Surface Facilities, 2010-2014, PDO
• Harweel Cluster Phase II, 2008-2009, PDO
• Burhaan Phase-II Construction Project, 2004-2005, PDO
• Saih Rawl - Phase IV Expansion, 2004-2005, PDO
Oil & Gas Facility Development - Construction Projects
• Khamilah Gas Compressor Project , 2015 , Enerflex / Occidental
• Block-62 Gas Plant Rental Project, 2015-2016 , Enerflex / Occidental
• Construction for Abu Tabul Gas plant Project, 2012-2014, Enerflex/OOCEP
• Upgradation of Zuliyah Production Station, 2011, Exterran / PDO
• Khazzan Gas Compression Facility, 2009-2010, Enerflex / BP
• EPC of Gas Supply to Downstream Industries, 2008 to 2009, OGC
• Daleel Gas Processing Plant , 2007-2008, Exterran / Daleel Petroleum
• Zauliyah Gas Gathering/ Production Plant, 2007-2008, Exterran / PDO
• Lekhwair GCU & Compression PC Project, 2007-2008, PDO
• EPC of Well Testing Facilities, 2012-2014, PDO
• EPC of Lekhwair Water Injection Project, 2011-2012, PDO
• Flowline Installation and Site Construction Services, 2011-2012, BP
• Saih Rawl Gathering Expansion Project , 2006 , PDO
• EPC Lekhwair Flow line Construction, 1995-1996, PDO
• EPC Flow line & Manifold Construction Contracts, 1992-1993, ELF
Off - Plot Projects
• Engineering, Procurement & Construction Contract – Nimr, 2014-2016, PDO
• Pot Re-lining Mechanical works, 2016 - 2018 , Ma’aden Aluminium
• Pot Re-lining Services Contract, 2014 - 2019, Qatalum
• Civil Works Services for Safah (Block 09) and Wadi Lathem (Block 27) Fields, 2013-2016, Occidental
• Engineering & Maintenance Contract – North Oman, 2011-2017, PDO
• Mukhaizna Maintenance Service Contract, 2007-2010, Occidental
• KSF Integrated Service Contract, 2007-2010, Medco
• Engineering & Maintenance Contract – North Oman, 2005-2010, PDO
• Wellhead & Field Monitoring Equipment Maintenance & Support , 2001-2011, PDO
• Engineering Service Contract DCME&I, 2001-2005, PDO
• North Oman Campaign Maintenance, 1996-2001, PDO
• Pipeline Maintenance Contract for North & South Oman, 1996-2000, PDO
Long Term Service Contracts
Gas Treatment and Compression
• EPC of 8 Tanks for WTP-LOT 4 at Mukhaizana, 2013-2014, Occidental
• EPC of 10 Tanks at Safah and Wadi Latham, 2012- 2014, Occidental
• EPC of 3 Condensate & Diesel storage Tanks at Abu Tabul Block-60 Gas Processing Plant,
2012-2013, Enerflex / OOCEP
• EPC of Tanks at Amin On-Plot Water Injection Development, 2012-2014, PDO
• EPC of 4 Chamber Gas Floatation Tank at Suwaihat, 2012-2013, PDO
• EPC of 7 Tanks for GAP SAC Project, 2010, Occidental
• EPC of 5 Tanks at Shah & Sahil Field Abu Dhabi, 2010- 2012, TR / ADCO
• EPC of 5 Tanks at Marmul Polymer Flooding Project, 2007-2008, BEC/PDO
• EPC of 3 Tanks at Safah and Wadi Latham, 2007- 2008, Occidental
Workshop – Fabrication
Tanks
• Fabrication & supply of HP CS vessels with U2 stamp for Rabab Harweel Integrated Project(RHIP),
2015-2016, Petrofac/PDO
• Fabrication & Supply of CS/SS , Pressure Vessels for BP Khazzan CPF, 2015-2016, Petrofac / BP
• Fabrication & supply of Process & Utility Skids for BP Khazzan CPF, 2015-2018, Petrofac/BP
• Supply of Cyclic Steam Service Manifolds (13 nos) for Amal 1C project, 2015-2016, Worley Parsons/PDO
• Fabrication of Power Modules for HRSG (12 Nos) for Amal-1C Steam Project, 2014-2015,
Nooter/Eriksen/ PDO
• Columns & Vessels for Sohar Refinery Improvement Project, 2014-2015 Daelim-Petrofac/ ORPIC
• Flow Splitters & Surge Vessels for Amal-1C Project , 2014-2015, WorleyParsons/PDO
• Cyclic Steam Service Manifolds for Amal Stem Project, 2014, Al Turki/PDO
• Fabrication of 59 MSV Skids for South ODC, 2014-2015 Al Turki/ PDO
• Fabrication of Power Modules for HRSG (10 Nos) for Amal-1B Steam Project, 2012, Nooter/Eriksen/ PDO
• Fabrication of SS & CRA piping for Turkmenistan Gas Project, 2011-2012, Petrofac
• Fabrication of OTSG Steam Generators (7 Nos) for Amal Steam Project, 2010 - 2011, Progauge Technologies
• ASME Boiler Piping Fabrication - Qarn Alam Steam Project , 2009-2010, Dodsal/PDO
• HP Steam Separators for Qarn Alam Steam Project , 2009-2010, Dodsal/PDO
• HP Test Separator package –Khazzan Gas Compression Facility,2009-2010, Enerflex/BP
• Relief Valves Calibration & Maintenance for MAF Refinery during Shutdown, 2014, ORPIC
• Relief Valves Calibration & Maintenance for Salalah Methanol during TA Shutdown, SMC, 2014
• Centrifugal Pumps Maintenance for Occidental Mukhaizna, 2013-2014, Occidental
• Relief Valves Calibration & Maintenance for Sohar Refinery during Shutdown, 2013, ORPIC
• High Energy Centrifugal Pump Maintenance Services Contract, 2011-2015, PDO
• Routine Pump Maintenance Services Contract, 2010-2014, PDO
• Centrifugal Pump Repair/ Service Contract , 2005-2010, PDO
• Centrifugal Pump Maintenance Services Contract, 2002-2010, PDO
Workshop Maintenance
• Long Term Incentivized Routine Main Mechanical (Static) TA Contract, 2015-2018, ORPIC
• ORPIC 2015 Sohar refinery Emergency shutdown, 2015 , ORPIC
• OMC Turnaround 2015 - Non Reformer Jobs, 2015, Oman Methanol Company LLC
• Main Mech. Contract Static –Mina-Al Fahal Refinery, 2014, ORPIC
• Turnaround of Salalah Methanol Plant, 2014, SMC
• Turnaround of Aromatics Plant – Sohar Refinery 2013 , ORPIC
• Turnaround of Polypropylene Plant – Sohar 2013, ORPIC
• Major Refinery Turnaround – Mina-Al Fahal Refinery, 2012 , ORPIC
• Minor Refinery Shutdown – Mina-Al Fahal Refinery, 2010 , ORPIC
• Major Refinery Turnaround – Sohar, 2010 , ORPIC
• Minor Refinery Shutdown – Mina-Al Fahal Refinery, 2008 , ORPIC
• Major Refinery Turnaround – Mina-Al Fahal Refinery, 2007 , ORPIC
Turnaround & Shutdown
Group Headquarter
Nizwa, Oman Sohar, Oman
Muscat, Oman
Bahrain
MASCO, Oman
UAE
Special Technical Services & Tebodin L.L.C (STST)
Qatar
Joint Ventures (JV)
International Offices
STS Building, Building No: 1/75/A, Way No: 2316, Block No: 223,
Dohat Al Adab St., Madinat Al Sultan Qaboos, P.O. Box. 307,
Postal Code 118, Al-Harthy Complex, Muscat, Sultanate of Oman
Tel : +968 24647100 | Fax : + 968 24697100
Nizwa Industrial Estate,
Plot No.357 to 370, Road 3A, P.O. Box. 1655,
Postal Code. 611, Sultanate of Oman
Tel : + 968 25449077 | Fax : + 968 25449099
Arabian International Special Technical Services L.L.C.
Al Saman Tower, Block "A", Office 407,
Hamdan St. P.O. Box 46708,
Abu Dhabi - United Arab Emirates
Tel : +9712 6229740 | Fax : +9712 6229065
Qatar Special Technical Services, L.L.C
C-222, 2nd Floor C – Block, Builing No 77
Souq Messaieed, Street No 600, Zone 92
Messaieed Industrial City, P.O. Box: 50612, State of Qatar.
Tel : +974 44413074 | Fax: + 974 44419397
Bahrain Special Technical Services (STS) Co. W.L.L
Flat Nos. 33 Building No.1575,
Road No. 4631, Block No. 646, P.O.Box-70667,
Sitra, Nuwaidrat, Kingdom of Bahrain.
Tel : + 973 17622082 | Fax : + 973 17622081
“All
third
par
ty tr
ade
nam
es o
r log
os a
ppea
ring
in th
is b
roch
ure
are
the
prop
erty
of t
heir
resp
ectiv
e ow
ners
and
STS
doe
s no
t cla
im a
ny o
wne
rshi
p in
them
. STS
’ rel
atio
nshi
p w
ith th
ose
entit
ies
is th
at o
f an
inde
pend
ent p
arty
, an
d th
e in
clus
ion
of th
eir n
ames
and
/or l
ogos
in th
is b
roch
ure
is n
ot in
tend
ed to
, nor
sho
uld
it be
con
stru
ed a
s, cr
eatin
g or
impl
ying
any
form
al re
latio
nshi
p w
ith th
em b
e it
a pa
rtne
rshi
p, a
genc
y, jo
int v
entu
re, o
r em
ploy
men
t re
latio
nshi
p. S
TS s
peci
fical
ly d
iscl
aim
s al
l war
rant
ies,
expr
ess
or im
plie
d, in
clud
ing
with
out l
imita
tion,
the
war
rant
ies,
fitne
ss fo
r a p
artic
ular
pur
pose
, and
non
-infri
ngem
ent w
ith re
spec
t to
this
bro
chur
e an
d in
form
atio
n, g
raph
ics
and
mat
eria
ls c
onta
ined
her
ein.
”
Sohar Industrial Establishment,
Plot No. 253 & 254, P.O. Box. 52,
Postal Code. 327, Sultanate of Oman
Tel : + 968 26751238 | Fax : + 968 26750392
24, Azaibah Plaza, Way 61, Al Maaridh St,
P.O. Box 716, Postal Code. 130, Al Athaibah,
Muscat, Sultanate of Oman
Tel :+968 24612474 | Fax : +968 24587676
United Special Technical Services LLC. (USTS)Shatti Al Qurum , Beach Commerical Complex,
Office # 208 and 210 (2nd Floor), Way # 3003, Building # 163,
P.O. Box. 307, Postal Code 118, Al-Harthy Complex,
Muscat, Sultanate of Oman
Tel : +968 22060020 | Fax : + 968 22060021
Email: [email protected]
Majan Aluminium Services L.L.C (MASCO)
Plot No. 253 & 254, Sohar Industrial Establishment,
P.O Box 52, Postal Code. 327, Sultanate of Oman
Tel : + 968 26751476 | Fax : + 968 26750392
E-mail : [email protected] Web : www.stsoman.com
Office Locations