1 Stepper Motors. 2 Click once to show video 3 HOW CAN WE INCREASE THE RESOLUTION, OR STEPS, OF A MOTOR? 1.Increase the number of stationary electro.

1

Stepper Motors

2

Basic Structure and Operating Principle of Stepper Motors_Segment_0_xvid.avi

Click once to show video

3

HOW CAN WE INCREASE THE RESOLUTION, OR STEPS, OF A MOTOR?

1. Increase the number of stationary electro magnets in the outer stator

2. Increase the number of poles in the rotating rotor

4

Example: Six pole rotor, four electro magnets.

5

STEPPER MOTOR OPERATIONHow to make the rotor spin

Rotor

Stator coils

CNC Stepping Motor

6

The top electromagnet (1) is turned on, attracting the nearest teeth of a gear-shaped iron rotor. With the teeth aligned to electromagnet 1, they will be slightly offset from electromagnet 2

The top electromagnet (1) is turned off, and the right electromagnet (2) is energized, pulling the nearest teeth slightly to the right. This results in a rotation of 3.6° in this example.

7

The bottom electromagnet (3) is energized while electromagnet (2) is turned off; another 3.6° rotation occurs.

The left electromagnet (4) is energized, rotating another 3.6°. When the top electromagnet (1) is again enabled, the teeth in the sprocket will have rotated by one tooth position; since each step is 3.6° it will take 100 steps to make a full rotation in this example.

8

HOW CAN WE INCREASE THE SPEED THE MOTOR ROTATES AT?

1. Increase the rate at which we switch the magnets on and off

9

THE END