This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Replacement interval EU Inspect and replenish every 60000 km (or 3 years)Normal driving condition: Fill for Life(Severe driving condition: Change every 120000 km)
GEN Inspect and replenish every 60000 km (or 4 years)Normal driving condition: Fill for Life(Severe driving condition: Change every 120000 km)
Replacement interval
DSL EU
GEN
GSL Inspect and replenish every 60000 km (or 4 years)Normal driving condition: Fill for Life(Severe driving condition: Change every 120000 km)
04-53190-01
2. TIGHTENING TORQUE
Part name Tightening torque Remark
1. Drive gear mounting bolt of differential carrier 166.6 to 176.4 Nm 10 EA
2. Reverse shaft mounting bolt 74.5 to 89.2 Nm
3. Transmission case mounting bolt 19.6 to 26.5 Nm 22 EA
4. Concentric slave cylinder mounting bolt 11.8 to 14.7 Nm 3 EA
5. Backup lamp switch 29.4 to 34.3 Nm
6. Neutral switch 29.4 to 34.3 Nm
7. Oil filler plug 58.8 to 78.4 Nm
8. Oil drain plug 58.8 to 78.4 Nm
9. Oil plug 58.8 to 78.4 Nm
10. Shift lever mounting nut 42.2 to 53.9 Nm
11. Selector lever mounting nut 42.2 to 53.9 Nm
12. Control shaft assembly mounting bolt 9.8 to 11.8 Nm 7 EA
13. Guide bolt 42.2 to 53.9 Nm
04-6
Front view Rear view
1. OVERVIEWThis vehicle is equipped with WM6F1 M/T (Manual Transmission). This transmission is integrated with an axle and designed to maximize the driving performance by optimizing the gear ratio according to the engine torque.
WM6F1 M/T assembly
04-73190-01
1) Characteristics of WM6F1 M/T Both Forward and Reverse gears use the helical gear and are made of high-strength material.Drives the clutch with a concentric slave cylinder mounting bolt.Shifting the transmission gears is performed through the remote control cable.A pull type clutch is used for Reverse gear shifting.Features triple/double/single synchronization.