1 Quick Quiz

Quick Quiz

1.   The purpose of this code is to define the means of ____________________transmission, notification, and annuciation the levels of performance; and the reliability of the various types of fire alarm systems.

A.   Sound Initiation

B.   Wave inititation

C.   Signal Initiation

D.   Sign Initiation

2.   A ceiling that has a slope of more than ______in______.

A.   1 in 8

B.   2 in 4

C.   4 in 5

D.   6 in 6

3.   NFPA 90A is

A.   Standard for Installation of Air-conditioning and Ventilating System

B.   Standard for Installation of Lightning Protection

C.   Standard on Stored Electrical Energy Emergency and Stand by Power System

D.   Standard for the Installation of Sprinker Systems

4.   If the top of girder is within ______inches from the ceiling, the girder is a factor in determining the number of detectors and is to be considered a beam.

A.   2 inches

B.   3 inches

C.   4 inches

D.   5 inches

5.   Which of the following is not a fire alarm system classification?

A.   Standard for installation of Sprinkler Systems

B.   Standard on stored electrical energy emergency and stand by power systems

C.   Standard for Installation of Lightning Protection.

D.   Standard for installation of air-conditioning and ventilation systems

Quick Quiz

1.   Adequate facilities shall be provided ___________maintain the battery fully charged under all conditions of normal operation

A.   schedule to

B.   manually

C.   supervise

D.   automatically

2.   Marking - Storage batteries shall be located so that the ________ equipment, including overcurrent devices, are not adversely affected by gases and shall confirm to the requirements of NFPA 7

A.  

Security

B.   Electrical

C.   Food

D.   Fire alarm

3.   A complete record of the test and operation of each system shall be kept until the next test and for ______years

A.   1 year

B.   2 years

C.   3 years

D.   4 years Quick Quiz

1.   All initiating devices can be recess mounted?

A.   True

B.   False

2.   Dectors are required everywhere with out exceptions?

A.   True

B.   False

3.   Temperature Classification for heat sensing fire detectors for "HIGH HEAT" sensing fire detectors shall be marked with RTI. The RTI marking requirements shall be effective July 1, 2008. RTI is

A.   Run time interrupt

B.   Responce Time Index

C.   Resistance Times Current

D.   Root Means Instant

4.   Integral Heat Sensors on Combination and Multi-sensor Detectors integrally mounted on a smoke detector shall be listed for not less than ____ ft. spacing

A.   10 feet

B.   20 feet

C.   40 feet

D.   50 feet

5.   On ceiling 10 to 30 feet heat detector liner spacing shall be reduced in accordance with what table?

A.   Tabel 4.6.5.5

B.   Table 5.6.5.5.1

C.   Table 6.5.4.3

D.   Table 7.4.5.3

6.   In Annex "A"_____feet spacing is a guide for prescriptive designs. The use of such spacing is based upon customary practice in the fire alarm communitiy.

A.   10 feet

B.   20 feet

C.   30 feet

D.   40 feet

7.   Spot-type smoke detectors shall be located on the ceiling not less than _____inches from a sidewall to the near edge or, if on the sidewall between _____inches and 12 inches down from the ceilting to the top of the detector

A.   4"

B.   6"

C.   8"

D.   10"

8.   To insure that audible public mode are clearly heard, unless otherwise permitted by 7.4.2.2 through 7.4.2.5 shall have a sound level at least ____dB above the average ambient.

A.   10

B.   15

C.   20

D.   25 Quick Quiz

1.   The application, installation, and performance of fire alarm system within protected premises, including fire alarm and supervisory signals shall comply with requirements of _______chapter

A.   Chapter 1

B.   Chapter 3

C.   Chapter 4

D.   Chapter 6

2.   A record of installed software and fireware version numbers shall be maintained at the location of the fire alarm ________.

A.   Station

B.   System

C.   Control unit

D.   Panel

3.   What article provides information that shall be used in the design and installation of protected premises fire alarm and mass notification?

A.   2.4.1

B.   3.4.1

C.   4.4.1

D.   6.4.1

4.   SLC is abbreviation for

A.   Single lens control

B.   Smoke line control

C.   Signal line circut

D.   Simple line correction

5.   NACs is abbreviation for

A.   Notification Appliance Circuit

B.   National Alarm Corporation

C.   North Atlantic Contacts

D.   Non-Acceptance Circuit

6.   The abbreviation "IDS" means?

A.   Initiating Device Circuit

B.   Interlock Discharge Smoke

C.   Internet Digital Signal

D.   Interrupt Disconnect Switch Quick Quiz

1.   The requirements of this chapter shall address the reception of a notification signal and not the _________'s

A.   address

B.   content

C.   signal

D.   circuit

2.   All notification appliances installed in conformity with Chapter 7 shall be _______ for the purpose for which they are used.

A.   address

B.   content

C.   listed

D.   designed

3.   An average ambient sound level greater than _____dBA shall require the use of visiable notification appliance's in accordance with condition 7.5

A.   105

B.   95

C.   75

D.   50

4.   Sound from normal or permanent source having a duration greater than ____ seconds, shall be included when measuring normal ambient sound level.

A.   90

B.   80

C.   70

D.   60

5.   To insure that audible public mode are clearly heard, unless otherwise permitted by 7.4.2.2 through 7.4.2.5 shall have a sound level at least ____dB above the average ambient.

A.   25

B.   20

C.   15

D.   10

Quick Quiz

1.   The performance, installation, and operation of fire alarm systems at a _________ attended supervising station and between the protected premises and the ____________ attended supervising station shall comply with the requirements of this chapter

A.   intermittent

B.   continuously

C.   un-attended

D.   sporadic

2.   Central station shall have not less than _____ person on duty at the central station at all time to ensure disposition of signals in accordance wiht requirement 8.3.7

A.   2

B.   3

C.   4

D.   5

3.   Supervising facilities of proprietary fire alarm systems shall comply with the operatinf procedures of Section _________.

A.   8.3

B.   8.4

C.   8.5

D.   8.6

4.   Remote supervising station fire alarm systems shall provide an ________ audible and visiable indication of alarm, supervisory, and trouble conditions at a location remote from the protected premises.

A.   device

B.   manual operated

C.   automatic

D.   responce

5.   Section _____ shall apply where central station service is neither required or elected.

A.   8.3

B.   8.4

C.   8.5

D.   8.6

6.   In event of failure of equipment of subsidiary station a backup shall be operational within ________seconds

A.   10

B.   30

C.   60

D.   90

7.   Re-transmission means shall be tested in accordance with Chapter

A.   6

B.   7

C.   8

D.   10

8.   Complete records of all signals received shall be retained for _____years.

A.   1

B.   2

C.   3

D.   4

9.   Section _____ shall apply where central station service is neither required or elected.

A.   8.3

B.   8.4

C.   8.5

D.   8.6 Quick Quiz

1.   Installation personnel shall be qualified in the ______ installation, and testing of public fire alarm systems.

A.   inspection

B.   design

C.   maintenance

D.   review

2.   Alarm-receiving equipment at public fire service communication center is found in what section?

A.   Section 1.4

B.   Section 2.5

C.   Section 3.6

D.   Section 9.5

3.   How many types of alarm-receiving equipment are there?

A.   1

B.   2

C.   3

D.   4

4.   Alarm from boxes shall be automatically received and recorded at the ________service communication center.

A.   panel

B.   central office

C.   public fire

D.   private facilities

5.   The power supplied to all required circuits and devices of the system shall be constantly monitored for ___________.

A.   power

B.   current

C.   voltage

D.   integrity

6.   ______________shall be indicated where there is a trained an competent person on duty at all times

A.   alarm signal

B.   trouble signal

C.   audible signal

D.   visiable signal

7.   What chapter complies with Public Fire Alarm Reporting Systems?

A.   Chapter 6

B.   Chapter 7

C.   Chapter 8

D.   Chapter 9

8.   All systems shall be under the control of a designated jurisdictional __________

A.   Supervisor

B.   Employee

C.   Manager

D.   Owner

9.   Fiber optics cabling shall be considered an ____________transmission medium.

A.   acceptable

B.   non-acceptable

C.   approved

D.   possibility Quick Quiz

1.   What chapter will you find Inspection, Testing, and Maintenance?

A.   Chapter 2

B.   Chapter 3

C.   Chapter 7

D.   Chapter 10

2.   Delagation of responcibility shall be ____________ with a copy of such delagation provided of the AHJ upon request.

A.   in writing

B.   verbally

C.   submitted

D.   presented

3.   You must be a certified Fire/Life Safety Technician to perform inspection, testing, and maintenace.

A.   True

B.   False

4.   What is the purpose of new sub-section 10.2.6?

A.   Inspection

B.   Maintenance

C.   Installation

D.   Testing

5.   Control equipment: Fire Alarm Systems Monitored for Alarm, Supervisory, and Trouble Signal fuses shall be visual inspected every __________.

A.   Monthly

B.   Quarterly

C.   Semi-Annually

D.   Annually

6.   Fiber-Optic Cable Connection - visual inspection is performed __________.

A.   Monthly

B.   Quarterly

C.   Semi-annually

D.   Annually

7.   Video Image Smoke and Flame Detectors shall be inspected, tested, and maitained __________________.

A.   Monthly

B.   Quarterly

C.   Semi-annually

D.   Manufacturer's published instruction

8.   To ensure that each smoke detector or smoke alarm is within its listed and marked sensitivity range, it shall be tested using how many methods?

A.   2

B.   3

C.   4

D.   5

9.   In table 10.4.2.2 how many test methods are listed?

A.   8

B.   16

C.   21

D.   26

10.   How many items are there in Testing Frequencies?

A.   8

B.   16

C.   21

D.   26

11.   Fire alarm systems equipment shall be maintained in accordance with _______.

A.   NFPA CHAPTER 7

B.   NFPA CHAPTER 8

C.   NFPA CHAPTER 9

D.   Manufacture's published instruction

12.   How many pages are there for "Inspection and Testing Forms"?

A.   1

B.   3

C.   4

D.   5

13.   Nickel-Cadmium Batteries required visual inspections is __________?

A.   Monthly

B.   Quarterly

C.   Semi-annually

D.   Annually Quick Quiz

1.   What chapter does Single-and Multiple-Station Alarms and Household Fire Alarm systems is located?

A.   Chapter 2

B.   Chapter 4

C.   Chapter 9

D.   Chapter 11

2.   Single-and Multiple-Station Alarms and Household Fire Alarm Systems shall comply with Chapert 4 through 9

A.   True

B.   False

3.   Chapter 11 determines the escape route?

A.   Yes

B.   No

4.   The use of fire alarm system smoke detectors, and notification appliances shall be permitted to meet the fire warning requirements for smoke detector specified in _______.

A.   7.5.1

B.   8.5.1

C.   9.5.1

D.   11.5.1

5.   Smoke and heat alarms shall be covered by one of the following means. How many means are there?

A.   2

B.   3

C.   5

D.   6

6.   Any failure of any non-reliable or short-life component that renders the detector inoperable shall result in a _______________signal or otherwise be apparent to the occupant. of the living unit without the need for test.

A.   Steady

B.   Pulse

C.   Trouble

D.   Alarm