-
STUDENT PORTFOLIO
CONTENTS: (1) FACULTYS VISION & MISSION
(2) PROGRAMME EDUCATIONAL OBJECTIVES
(PEO)
(3) PROGRAMME OUTCOMES (PO)
(4) PROGRAMME OUTCOME MATRIX
! Bachelor of Engineering (Honours) Mechanical EM220 (Structure
D)
! Bachelor of Mechanical Engineering (Manufacturing) (Honours)
EM221/241
(5) PROGRAMME OUTCOME RUBRICS
(PO1 PO12)
(6) PROGRAMME OUTCOME - BASED ASSESSMENT
FORM
-
STUDENT PORTFOLIO
(1) FACULTYS VISION & MISSION
-
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
VISION
A leader in the mechanical engineering
discipline towards global excellence
through world class education and
research.
MISSION
To produce graduates with strong
mechanical engineering fundamentals,
analytical and leadership skills,
competitive, creative, innovative and
professional ethics.
-
STUDENT PORTFOLIO
(2) PROGRAMME
EDUCATIONAL OBJECTIVES (PEO)
-
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
PROGRAMME EDUCATIONAL OBJECTIVES (PEO)
Specific goals consistent with the mission and vision of the
Institute of Higher Learning (IHL) are responsive to the expressed
interest of programme stakeholders, describing expected
achievements of graduates in their career and professional
life.
PEO 1 - Engineers adapt and transform the acquired knowledge in
public and private sectors with respect to related professional
fields. (KPI: 70% employers satisfaction on alumni career
progression; 25% of alumni holding leadership position having
authority and subordinates) PEO 2 - Engineers are expert and
competent in their professional fields.
-
(KPI: 5% of alumni are registered professional engineers or
engineering experts or equivalent after five (5) years of
employment; 70% of alumni work in related engineering job
functions)
PEO 3 - Engineers are globally competitive and professionally
employed in multinational/international organizations. (KPI: 30% of
alumni work in multinational/international companies or equivalent
international levels) PEO 4 - Engineers practice ethical and
professional values in their respective fields. (KPI: 90% of
stakeholders/respondents are satisfied with alumni ethical and
professional values)
-
STUDENT PORTFOLIO
(3) PROGRAMME OUTCOMES (PO)
-
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
PROGRAMME OUTCOMES (PO)
PO DESCRIPTION EDUCATIONAL DOMAIN
PO1 Able to apply knowledge of mathematics, science, engineering
fundamentals and an engineering specialisation to the solution of
complex engineering problems
C
PO2 Able to identify, formulate, research literature and analyse
complex engineering problems reaching substantiated conclusions
using first principles of mathematics, natural sciences and
engineering sciences
C
PO3
Able to design solutions for complex engineering problems and
design systems, components or processes that meet specified needs
with appropriate consideration for public health and safety,
cultural, societal, and environmental considerations
C
PO4
Able to conduct investigation into complex problems using
research-based knowledge and research methods including design of
experiments, analysis and interpretation of data, and synthesis of
information to provide valid conclusions
C
PO5 Able to create, select and apply appropriate techniques
resources, and modern engineering and IT tools, including
prediction and modelling, to complex engineering activities, with
an understanding of the limitations
P
PO6 Able to apply reasoning informed by contextual knowledge to
assess societal, health, safety, legal and cultural issues and the
consequent responsibilities relevant to professional engineering
practice
A
PO7 Able to understand the impact of professional engineering
solutions in societal and environmental contexts and demonstrate
knowledge of and need for sustainable development
A
PO8 Able to apply ethical principles and commit to professional
ethics and responsibilities and norms of engineering practice A
PO9
Able to communicate effectively on complex engineering
activities with the engineering community and with society at
large, such as being able to comprehend and write effective reports
and design documentation, make effective presentations, and give
and receive clear instructions
A
PO10 Able to function effectively as an individual, and as a
member or leader in diverse teams and in multi-disciplinary
settings P
PO11 Able to recognize the need for, and have the preparation
and ability to engage in independent and life-long learning in the
broadest context of technological change
P
PO12
Able to demonstrate knowledge and understanding of engineering
and management principles and apply these to ones own work
(including as an entrepreneur), as a member and leader in a team,
to manage projects and in multidisciplinary environments
P
NOTE :
C - Cognitive
P Psychomotor
A - Affective
-
STUDENT PORTFOLIO
(4) PROGRAMME OUTCOME Matrix
-
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
! Bachelor of Engineering (Honours) Mechanical EM220 ! Bachelor
of Mechanical Engineering (Manufacturing) (Honours) EM221/EM241
PEO Description
Fakulti Kejuruteraan Mekanikal PO-PEO MAPPING Bachelor of
Engineering (Hons.) Mechanical - EM220 Bachelor of Mech.
Engineering (Manufacturing) (Hons.) - EM221 E
ngin
eers
ada
pt a
nd t
rans
form
th
e ac
quir
ed k
now
ledg
e in
pub
lic
and
priv
ate
sect
ors
wit
h re
spec
t to
rel
ated
pro
fess
iona
l fie
lds.
(K
PI:
70%
em
ploy
ers
sat
isfa
ctio
n on
alu
mni
car
eer
prog
ress
ion
(Ada
pt);
25%
of a
lum
ni h
oldi
ng
lead
ersh
ip p
osit
ion
havi
ng
auth
orit
y an
d su
bord
inat
es)
Eng
inee
rs a
re e
xper
t an
d co
mpe
tent
in t
heir
pro
fess
iona
l fie
lds.
(K
PI:
5%
of a
lum
ni a
re r
egis
tere
d pr
ofes
sion
al e
ngin
eers
or
engi
neer
ing
expe
rts
or e
quiv
alen
t af
ter
five
(5) y
ears
em
ploy
men
t; 70
% o
f alu
mni
wor
k in
rel
ated
en
gine
erin
g jo
b fu
ncti
ons)
E
ngin
eers
are
glo
bally
co
mpe
titi
ve a
nd p
rofe
ssio
nally
em
ploy
ed in
m
ulti
nati
onal
/int
erna
tion
al
orga
niza
tion
s.
(KP
I: 3
0% o
f alu
mni
wor
k in
m
ulti
nati
onal
/in
tern
atio
nal
com
pani
es o
r eq
uiva
lent
in
tern
atio
nal l
evel
s)
Eng
inee
rs p
ract
ice
ethi
cal a
nd
prof
essi
onal
val
ues
in t
heir
re
spec
tive
fiel
ds.
(KP
I: 9
0% o
f sta
keho
lder
s /r
espo
nden
ts a
re s
atis
fied
wit
h al
umni
eth
ical
and
pro
fess
iona
l va
lues
)
PO Description PEO1 PEO2 PEO3 PEO4
PO1 Able to apply knowledge of mathematics, science, engineering
fundamentals and an engineering specialization to the solution of
complex engineering problems;
-
PO2 Able to identify, formulate, research literature and analyze
complex engineering problems reaching substantiated conclusions
using first principles of mathematics, natural sciences and
engineering sciences;
PO3 Able to design solutions for complex engineering problems
and design systems, components or processes that meet specified
needs with appropriate consideration for public health and safety,
cultural, societal, and environmental considerations
PO4 Able to conduct investigation into complex problems using
research based knowledge and research methods including design of
experiments, analysis and interpretation of data, and synthesis of
information to provide valid conclusions
PO5 Able to create, select and apply appropriate techniques,
resources, and modern engineering and IT tools, including
prediction and modeling, to complex engineering activities, with an
understanding of the limitations
PO6 Able to apply reasoning informed by contextual knowledge to
assess societal, health, safety, legal and cultural issues and the
consequent responsibilities relevant to professional engineering
practice.
PO7 Able to understand the impact of professional engineering
solutions in societal and environmental contexts and demonstrate
knowledge of and need for sustainable development
PO8 Able to apply ethical principles and commit to professional
ethics and responsibilities and norms of engineering practice.
PO9 Able to communicate effectively on complex engineering
activities with the engineering community and with society at
large, such as being able to comprehend and write effective reports
and design documentation, make effective presentations, and give
and receive clear instructions
PO10 Able to function effectively as an individual, and as a
member or leader in diverse teams and in multi-disciplinary
settings.
PO11 Able to recognize the need for, and have the preparation
and ability to engage in independent and life-long learning in the
broadest context of technological change.
PO12 Able to demonstrate knowledge and understanding of
engineering and management principles and apply these to ones own
work (including as an entrepreneur), as a member and leader in a
team, to manage projects and in multidisciplinary environments.
-
STUDENT PORTFOLIO
(5) PROGRAMME OUTCOME Rubric (PO1 PO12)
-
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 1: Able to apply knowledge of mathematics,
science, engineering fundamentals and an engineering specialisation
to the solution of
complex engineering problems
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Demonstrates specific engineering knowledge of course
area.
Minimally understands and tries to apply mathematical and
scientific principles toward solving engineering problems.
Shows effort to evaluate and analyze process(es) and/or
data.
Adequately understands and applies mathematical and scientific
principles toward solving engineering problems.
Adequately evaluates and analyzes process(es) and/or data.
Understands and applies mathematical and scientific principles
toward solving engineering problems.
Skilled at evaluating and analyzing process(es) and/or data.
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
ii. Demonstrates analysis and judgment.
Tries to identify and understand issues or problems.
Demonstrates deficiencies with integrating information from
other sources to determine cause and effect relationships.
Struggles to choose a course of action or develop an appropriate
solution.
Frequently identifies and understands issues or problems.
Demonstrates potential to integrate information from other
sources to determine cause and effects relationships.
Chooses a reasonable course of action or develops an appropriate
solution.
Always identifies and understands issues or problems.
Integrates information from many sources to determine cause and
effects relationships.
Effectively chooses a course of action or develops an
appropriate solution.
iii. Demonstrates knowledge of mathematics.
Minimally understands the mathematical and scientific principles
involved.
Adequately understands and applies appropriate mathematics.
Handles algebra, trigonometry and calculus with minor
errors.
Understands and applies appropriate mathematics.
Handles algebra, trigonometry and calculus with minimal
errors.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 2: Able to identify, formulate, research
literature and analyze complex engineering problems reaching
substantiated conclusions using first principles of mathematics,
natural sciences and engineering sciences;
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Writes, observes, and listens with comprehension and critical
perception.
Misunderstands basic meaning of the
concepts presented. Fails to follow basic themes or
arguments and is not able to connect them to existing
knowledge.
Fails to recognize the credibility of sources.
Understands basic meaning of the concepts presented.
Follows themes and arguments, and connects them to existing
knowledge.
Fairly recognize the credibility of sources.
Understands fully the concepts presented.
Expands on or evaluates themes and arguments, and connects them
to existing knowledge.
Consistently recognize the credibility of sources.
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
ii. Communicates clearly, precisely, and in a well-organized
manner.
Unclear objectives, controlling ideas, main points or
argument.
Fails to use structure appropriate to the discipline.
Each section is unrelated to other paragraphs or sub-points and
offer inadequate or inappropriate examples and evidence.
Poorly organized and structured communication.
Fails to employ transition between ideas
Fails to use or violates standards for academic
communication.
Fairly clear objectives, controlling
ideas, main point or argument. Uses structure appropriate to
the
discipline. Each section develops a main idea,
offers examples and evidence, and suggests some relationship to
other paragraphs and sub-points.
Fairly organized and structured communication.
Generally employs some form of transition between ideas.
Generally follows standards for academic communication.
Clear objectives, controlling ideas,
main points or argument. Demonstrates creative and/or
effective command of discipline-appropriate structure.
Each section develops a main idea carefully, makes thorough use
of appropriate examples and evidence, and has a logical
relationship to other paragraphs and sub-points.
Very organized and structured communication
Consistently employs effective transitions between ideas.
Consistently follows standards for academic communications;
shows creativity in application of these standards.
iii. Demonstrate a large and varied vocabulary.
Poor selection of words and specific
terminology to explain the meaning of context.
Incorrectly identifies the correct meaning of many words within
the context.
Relies on repetition or limited diction
Fairly good selection of words and
specific terminology to explain the meaning of context.
Generally identifies the correct meaning of words within the
context.
Uses a varied vocabulary to convey ideas, using little
ineffective repetition
Very good selection of words and
specific terminology to explain the meaning of context.
Consistently identifies the correct meaning of words within the
context.
Consistently uses a rich and varied
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
to convey ideas. Misuses discipline-specific terminology
or basic vocabulary.
or limited diction. Generally uses correct/appropriate
word choice and discipline-specific terminology.
vocabulary to convey ideas. Consistently uses
correct/appropriate word choice and discipline-specific
terminology.
iv. Recognizes and use a variety of communication forms and
styles.
Inappropriate rhetoric form. Does not understand the concept
of
non-literal expression.
Fairly appropriate rhetoric form. Recognizes non-literal
expression, but
use may not always be appropriate.
Very appropriate rhetoric form. Recognizes and uses
non-literal
expression appropriately and effectively.
v. Use computer technologies or other technologies for
communications.
Poor selection of software for communicating informations or is
unable to use a computer to communicate or compile information.
Unable to communicate information using web pages and/or
presentation software.
Does not use basic email for communication or fails to follow
basic email etiquette (netiquette) in communications.
Fairly good selection of software for communicating informations
or is unable to use a computer to communicate or compile
information
Communicates information using basic features of web pages
and/or presentation software
Successfully uses email for communication and follows basic
rules of email etiquette (netiquette) in communications.
Very good selection of software
for communicating informations or is unable to use a computer to
communicate or compile information.
Communicates information using advanced features of web pages
and/or presentation software.
Successfully uses some of the non-basic features of email
programs (such as sending and receiving attachments, setting up
group email lists, or organizing mailboxes).
vi. Accommodate ideas from members or
Poor justification of ideas. Poor rationalization of ideas.
Fairly good justification of ideas. Fairly good rationalization
of ideas.
Very good justification of ideas
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
others. Very good rationalization of ideas.
vii. Multi-culture communication.
Unable to present multi-culture relation.
Able to present multi-culture relation. Successfully present
multi-culture relation.
viii. Non verbal communication.
Unable to use proper nonverbal
communication such as eye contacts, body language and
gesture.
Able to use nonverbal communication. Successfully use nonverbal
communication.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 3: Able to design solutions for complex
engineering problems and design systems, components or processes
that meet specified needs with appropriate consideration for public
health and safety, cultural, societal, and environmental
considerations
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Chooses appropriate analytic and design tools and models for
engineering problems.
Some evidence of the use analytical tools and modeling for the
problem.
Shows reasonable familiarity and use of analytic tools and
modeling.
Analysis and design tools used in the
problem are well-suited for the problem.
ii. Demonstrates effective practical and analytic techniques in
solving
engineering problems.
Uses some engineering skills to determine problem solution.
Good use of engineering skills to
analyze and design a solution to the problem.
Excellent ability to mix solid
engineering analysis with practical design and implementation
considerations.
iii. Shows depth of knowledge in using fundamental and advanced
engineering
approaches to problems.
Identifies most of the major issues and attempts to solve in an
analytic manner.
Good ability to isolate the problem and formulate a solution.
Uses engineering
approach to solve problems.
Demonstrates clear, sound reasoning
in identifying the underlying engineering issues and formulating
a plan for solution.
Uses the appropriate engineering analysis for each part of the
problem.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 4: Able to conduct investigation into complex
problems using research based knowledge and research methods
including design of experiments, analysis and interpretation of
data, and synthesis of information to provide valid conclusions
CTPS : CRITICAL THINKING , PROBLEM SOLVING
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Demonstrates specific engineering knowledge of subject
area.
Attempts to apply mathematical and scientific principles to
solution of open ended engineering problems.
Assumptions are weak and the problem to be solved is poorly laid
out.
The solution methodology is unclear and incorrect.
Can apply mathematical and scientific principles to solution of
open ended engineering problems.
Can make assumptions and reasonably identify the problem to be
solved.
The solution methodology is clear with minor errors.
Can readily apply mathematical and scientific principles to
solution of open ended engineering problems.
Can make appropriate assumptions and clearly identify the
problem to be solved.
The solution methodology is clear and correct.
ii. Critical thinking. Kim (CTPS 1)
Seldom identifies and understands issues, problems and
opportunities.
Has difficulty gathering information and drawing
conclusions.
Often identifies and understands issues, problems and
opportunities.
Gathers and thinks about information and offers responsible
interpretations; provides enough information to support
conclusions.
Always identifies and understands issues, problems and
opportunities.
Gathers and evaluates information, chooses a clear
interpretation, and provides enough information (quality and
quantity) to support conclusions.
-
iii. Evaluate situation and attempt to get point of view. (CTPS
2)
Needs assistance in evaluating situations. Does not seek
different points of view to
identify the root cause of a problem.
Can assess situations and arrive at objective evaluations.
Seeks different points of view and makes evaluations, based on
facts, to identify the root cause of a problem.
Generates criteria needed to assess situations and arrive at
objective evaluations.
Seeks different points of view and makes evaluations, based on
facts, to identify the root cause of a problem; verifies whether a
solution works; and acts on opportunities for improvement.
iv. Problem solving.
Sometimes uses effective approaches to develop solutions.
Occasionally takes action inconsistent with facts, constraints
or probable consequences.
With assistance, partially able to explain a problem.
Usually uses effective approaches to develop solutions.
Normally takes action consistent with facts, constraints and
probably consequences.
Independently able to explain a problem.
Repeatedly uses effective approaches to develop solutions.
Unfailingly takes action consistent with facts, constraints and
probable consequences.
Able to provide explanation of problem, develop evaluated
solutions, and make recommendations.
v. Assess own creativity.
(CTPS 3)
Usually relies on others to generate suggestions.
Uses the same strategy most of the time.
Suggests effective ways for getting a job done.
Identifies a variety of strategies, chooses an appropriate one,
and applies the strategy(ies) singly or in combination.
Suggests and evaluates effective solutions for getting a job
done.
Compares a variety of strategies, chooses the most effective,
and applies the strategy(ies) to improve the situation.
vi. Effective communication in identifying, formulating and
solving engineering problems.
Usually stresses major points and follows a logical
sequence.
Sometimes makes effective use of modern presentation tools.
Occasionally uses terms, examples, and graphs that is not
meaningful to audience.
Frequently stresses major points and follows a logical
sequence.
Often makes effective use of modern presentation tools. Usually
uses terms, examples, and graphs that is meaningful to
audience.
Always stresses major points and follows a logical sequence.
Frequently makes effective use of modern presentation tools.
Repeatedly uses terms, examples, and graphs that is meaningful
to audience.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 5: Able to create, select and apply appropriate
techniques resources, and modern engineering and IT tools,
including prediction and modelling, to complex engineering
activities, with an understanding of the limitations
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Identify Design Problem and Constraints.
Evidence of some understanding of the problem, deficiencies will
impact the quality of the solution.
Basically sound understanding of the
problem and constraints, has missed some key points.
Clear and complete identification of the design goal and the
constraints.
ii. Explores Alternative Designs.
Single design presented or unreasonable alternative
presented.
Alternative approaches explored to a limited depth.
Reasonable alternatives explored to arrive at final design.
iii. Uses analytic tools to aid in design process and support
final design.
Minimal application and use of appropriate tools.
Uses some analytic tools with moderate effectiveness.
Selects appropriate tools and uses
them effectively in developing design.
iv. Evaluate the sustainable aspect (environmental issues,
safety & health and cost).
Contain substantial error in sustainable analysis or
analysis.
Reasonable sustainable analysis is performed.
Adequately fulfill the sustainable analysis requirement or
constraint.
Effective usage of sustainable analysis.
Fulfill exactly the sustainable analysis requirement or
constraint imposed.
v. Documented Final Design.
Missing major calculations or design justification.
Incomplete-missing important documentation or calculations.
Complete, well documented, referenced final design.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 6: Able to apply reasoning informed by
contextual knowledge to assess societal, health, safety, legal and
cultural issues and the consequent responsibilities relevant to
professional engineering practice.
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Ability to communicate and interact within group member.
Unable to communicate and interact with other member.
Shows willingness to participate but shows moderate
communication skills.
Shows strong interest and
communicate effectively with group member.
ii. Ability to understand and take role as group member and
leader.
Unable to take role either as leader and group member.
Occasionally demonstrates the capability of taking different
role.
Successfully shows the capability in of taking role as leader
and member.
iii. Ability to respect the opinion and trust of other group
members.
Show intolerance of individual difference and unwilling to
accept responsibility.
Recognizes, accept and tolerates
individual differences in group.
Willing to accept and tolerate
diversity of ideas and take responsibility.
iv. Active participation passive in group decision making and
interactive.
Makes decisions hastily. Needs encouragement to contribute
ideas.
Occasionally participate in group
decision making.
Very active and provide encouragement of group members.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 7: Able to understand the impact of professional
engineering solutions in societal and environmental contexts and
demonstrate knowledge of and need for sustainable development
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Understand the implication of economics, environment and
culture to the professional practice.
Has been exposed to a code of ethics, including professional
behavior for interaction with co-workers, superiors, and clients,
as well as the general public.
Has been exposed to a code of ethics, including professional
behavior for interaction with co-workers, superiors, and clients,
as well as the general public.
Has been exposed to a code of ethics, including professional
behavior for interaction with co-workers, superiors, and clients,
as well as the general public.
ii. Practice a professional code of ethics for engineers.
Unable to practice professional code of practice.
Demonstrates this understanding
through acceptable behavior on a professional level
activity.
Practice professional code of ethics
through exemplary conduct on a professional level activity.
iii. The handling of proprietary information, licensed software,
confidentiality, conflicts of interest, citation of sources,
quotations, and copyright.
Indicates that the students believe that the impacts on society
are worth investigating but does not stress their importance.
Clearly indicates the importance of the impacts of technology on
society.
Clearly indicates and stresses the importance of the impacts of
technology on society and our need to be concerned about them or
explicitly acknowledges the responsibility borne by technologies
for the effect of their professional work on society.
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
iv. The extent to which discussion of the impact of technology
on society reflected recognition of the social responsibilities of
scientists and engineers.
Indicates that the students believe that the impacts on society
are worth investigating but does not stress their importance.
Clearly indicates the importance of the impacts of technology on
society.
Clearly indicates and stresses the importance of the impacts of
technology on society and our need to be concerned about them or
explicitly acknowledges the responsibility borne by technologies
for the effect of their professional work on society.
v. Safety and health issue Needs considerable assistance
with
safety practices and procedures; is not aware of the acts that
govern these.
Needs no assistance with using safety practices and
procedures.
Needs no assistance with using safety
practices and procedures; knows the acts that govern these.
vi. Environmental aspects Not stated any appreciation
towards
the importance of environmental concern.
Mostly effective in addressing environmental issues.
Effective in addressing environmental issues leading to a better
result.
vii. Healthy, safety and risk management
Demonstrate very little knowledge and relationship in health,
safety and risk issues to design.
Partial or limited coverage of the subject matter.
Demonstrate adequate knowledge and relationship in health,
safety and risk issues to design.
Adequate and effective coverage of the subject matter.
Demonstrated comprehensive knowledge and relationship in health,
safety and risk issues to design.
Extensive and detailed coverage of the subject matter.
viii. Evaluate solution for sustainable development
Show no concern towards sustainable development.
Sustainable development is well mention.
Successfully address the importance of
sustainable development with supporting result and
discussion.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 8: Able to apply ethical principles and commit
to professional ethics and responsibilities and norms of
engineering practice
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Acquired and applied knowledge not learned from previous
course work.
The project makes use of very little background knowledge or
methodologies not likely to learned coursework from previous.
The project contains an acceptable review of the literature on a
topic and/or makes moderate use of suitable
methodologies not likely learned in the coursework.
The project contains critical review of the literature on a
topic and/or makes extensive and effective use of recognized and
suitable methodologies not likely learned in the students
coursework.
ii. Posses personal growth.
Requires considerable assistance to realize the need for
personal growth.
Able to assess areas in need of personal growth.
Responsible for planning and creating own growth
experiences.
iii. Shows the capability to develop lifelong learning.
Has difficulty assessing personal strengths and areas for
development.
Able to set learning goals; creates a
process for planning and achieving them.
Ability to identify and accesses own learning sources and
opportunities.
iv. Demonstrate curiosity towards new knowledge.
Lack of interest and curiosity in acquiring new knowledge.
Show interest and curiosity in
acquiring new knowledge and expanding it.
Show strong interest and curiosity in
acquiring new knowledge and expanding it.
v. Information management.
Able to search for information using only one information system
(e.g., library, bookstore).
Able to locate and organize information using at least two types
of appropriate technologies or information systems.
Able to locate relevant information using more than two
appropriate technologies and information systems.
Independently organizes information using appropriate technology
and a recognized system of organization (e.g., alphabet, subject,
topic).
vi. Accessing, analyzing, and applying knowledge and Needs
assistance to find information Finds information independently.
Independently and efficiently finds
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
skills. when needed. Needs considerable assistance in
determining how information applies to and is relevant to a task
or subject area.
Needs considerable assistance in this area (e.g., writing a
report, acquiring or refining a skill, making a presentation).
Independently determines how information applies to and is
relevant to a task or subject area.
Able to apply knowledge and skills.
information and assists those who need help.
Critically analyzes how information applies to and is relevant
to a task or subject area in any discipline.
Able to apply knowledge and skills and include criteria for
evaluation of the product.
vii. Able to develop and take entrepreneurship opportunity.
Needs assistance develop and take business opportunity.
Develops and takes the business opportunity independently.
Able to use appropriate strategy to
develop, explore and take the business opportunity.
viii. Plan (set-up) and setup own business.
Able to plan and set-up own business with considerable
assistance.
Able to plan and set-up own business independently.
Successfully plan and set-up own business independently.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 9: Able to communicate effectively on complex
engineering activities with the engineering community and with
society at large, such as being able to comprehend and write
effective reports and design documentation, make effective
presentations, and give and receive clear instructions
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Shows skill in carrying out experiments.
Unable to carry out experiment without assistance.
Students capable of carrying out experiment.
Student capable of carrying
out experiments smoothly with minimum assistance.
ii. Shows skill in developing goals and procedure (design &
project).
Lacking or incorrect theoretical approach, test plan will
produce experimental data that may or may not be suitable.
Student able to perform an analysis in describing the problem
and capable to plan an experimental procedure.
Clear explanation and
identification of important analytical problem features for
investigation of laboratory experiments.
Well prepared and execute plan of the experimental.
iii. Demonstrates use of judgment and insight to design
(formulate) and present experimental results.
Data presented in an understandable manner and does not show
relation to theoretical trends.
Experimental trends are discovered and presented using charts,
graphs, or other presentation format.
Students have the capability
to relate theoretical analysis and experimental result to come
out a clear and understandable conclusion.
Student is able to present experimental result using appropriate
charts graphs and
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Shows skill in carrying out experiments.
Unable to carry out experiment without assistance.
Students capable of carrying out experiment.
Student capable of carrying
out experiments smoothly with minimum assistance.
others presentation format.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 10: Able to function effectively as an
individual, and as a member or leader in diverse teams and in
multi-disciplinary settings
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
i. Demonstrate communication and interaction.
Some evidence of communication and interaction.
Rarely has confidence to evaluate own work.
Usually acts without considering personal ethics when dealing
with people, problems, and situations.
Useful technical communication among participants.
Has confidence to make sure final products meet standards.
Consistently uses honesty, integrity, and an acceptable code of
ethics when dealing with people, problems, and situations.
Solid evidence of effective technical interaction among
participants, with good use of technical communication tools.
Has confidence to make sure final products exceed standards.
Shows initiative and effort in modeling honesty, integrity, and
an acceptable code of ethics when dealing with people, problems,
and situations.
ii. Initiative. Limited contributions of team members.
Contributions by all members of the team.
Uses technical strengths of each team member to full
advantage.
Full participation and a appropriate technical contributions of
each member.
-
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
iii. Demonstrate professional responsibility and skills.
Little evidence of leadership, cooperation, or interaction.
Occasionally sets goals; does not have a process for achieving
goals.
May not fully appreciate the need to set and reach goals.
Lacks motivation to set goals.
Some planning and interaction is evident.
Sets realistic, attainable goals; uses a process for achieving
them.
Sets and achieves goals on schedule. Sets new goals
independently.
Group work shows organization, planning, and productive
interaction.
Sets challenging goals with a step-by-step plan and time frame
for achieving them.
Sets goals, and achieves them ahead of schedule; offers to
mentor others.
Sets new and challenging goals independently.
iv. Use of Diverse (Multi- disciplinary) Technology.
Some integration of multiple technologies.
Successful use of a variety of technologies in the project.
Aggressive investigation and use of
diverse technology by team members.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 11: Able to recognize the need for, and have the
preparation and ability to engage in independent and life-long
learning in the broadest context of technological change
PO PERFORMANCE CRITERIA
POOR (1) (2)
ACCEPTABLE (3) (4)
EXCELLENT (5)
v. Indicate an understanding or appreciation of contemporary
issues.
The assignment not dealt with an aspect of contemporary issues
and the report says non about the basic societal issues.
The assignment dealt with a little aspect of contemporary issues
and the report indicated that the students understood and
appreciated the basic societal issues.
The assignment dealt clearly with an aspect of contemporary
issues and the report indicated that the students understood
clearly the detailed scope and character of the larger societal
issues.
vi. Public interest and societal impact.
No consideration of public interest and societal impact and no
evaluation in engineering project/product.
Effective evaluation of public interest and societal impact and
little evaluation in engineering project/product.
Effective assessment of public interest and societal impact and
detailed evaluation in engineering project/product.
-
PROGRAM OUTCOME RUBRIC
PROGRAM OUTCOME 12: Able to demonstrate knowledge and
understanding of engineering and management principles and apply
these to ones own work (including as an entrepreneur), as a member
and leader in a team, to manage projects and in multidisciplinary
environments
-
STUDENT PORTFOLIO
(6) PROGRAMME OUTCOME-Based Assessment Form
-
PROGRAMME OUTCOME-BASED ASSESSMENT FORM
STUDENT NAME: PROGRAMME : EM220 / EM221 STUDENT ID : SEMESTER
:
Total average scale for all courses (1 to 5): Scale for PO
Performance
Criteria
POOR (1)
(2)
ACCEPTABLE (3)
(4)
EXCELLENT (5)
Students Action / Remark:
________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________________
Academic Advisors Action / Remark:
________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________________
. .. Signature & Name of Academic Advisor Signature of
Student Date
No: Course Code Course Course Lecturer
PO PERFORMANCE CRITERIA
(Please refer to respective Programme Outcome Rubric.)
Average scale for
each course
i ii iii iv v vi vii viii
UNIVERSITI TEKNOLOGI MARA FACULTY OF MECHANICAL ENGINEERING
PO1 / PO2 / PO3 / PO4 / PO5 / PO6 / PO7 / PO8 /
PO9 / PO10 / PO11 (Circle where appropriate.
Use separate sheet for each PO.)
-
Submission to The Engineering Accreditation Council for
Accreditation of Bachelor of Mechanical Engineering
(Manufacturing) (Honours), Universiti Teknologi MARA
TABLE 1 Course to PO Matrix
Fakulti Kejuruteraan Mekanikal COURSE- PO MAPPING Bachelor of
Mechanical Engineering (Manufacturing) (Hons.) - EM241
Able
to A
pply
kno
wle
dge
of m
athe
mat
ics,
sci
ence
, eng
inee
ring
fund
amen
tals
an
d an
eng
inee
ring
spec
ializ
atio
n to
the
solu
tion
of c
ompl
ex e
ngin
eerin
g pr
oble
ms;
Able
to Id
entif
y, fo
rmul
ate,
rese
arch
lite
ratu
re a
nd a
naly
ze c
ompl
ex
engi
neer
ing
prob
lem
s re
achi
ng s
ubst
antia
ted
conc
lusi
ons
usin
g fir
st p
rinci
ples
of
mat
hem
atic
s, n
atur
al s
cien
ces
and
engi
neer
ing
scie
nces
;
Able
to D
esig
n so
lutio
ns fo
r com
plex
eng
inee
ring
prob
lem
s an
d de
sign
sy
stem
s, c
ompo
nent
s or
pro
cess
es th
at m
eet s
peci
fied
need
s w
ith a
ppro
pria
te
cons
ider
atio
n fo
r pub
lic h
ealth
and
saf
ety,
cul
tura
l, so
ciet
al, a
nd e
nviro
nmen
tal
cons
ider
atio
ns
Able
to C
ondu
ct in
vest
igat
ion
into
com
plex
pro
blem
s us
ing
rese
arch
bas
ed
know
ledg
e an
d re
sear
ch m
etho
ds in
clud
ing
desi
gn o
f exp
erim
ents
, ana
lysi
s an
d in
terp
reta
tion
of d
ata,
and
syn
thes
is o
f inf
orm
atio
n to
pro
vide
val
id
conc
lusi
ons
Able
to C
reat
e, s
elec
t and
app
ly a
ppro
pria
te te
chni
ques
, res
ourc
es, a
nd
mod
ern
engi
neer
ing
and
IT to
ols,
incl
udin
g pr
edic
tion
and
mod
elin
g, to
co
mpl
ex e
ngin
eerin
g ac
tiviti
es, w
ith a
n un
ders
tand
ing
of th
e lim
itatio
ns
Able
to A
pply
reas
onin
g in
form
ed b
y co
ntex
tual
kno
wle
dge
to a
sses
s so
ciet
al,
heal
th, s
afet
y, le
gal a
nd c
ultu
ral i
ssue
s an
d th
e co
nseq
uent
resp
onsi
bilit
ies
rele
vant
to p
rofe
ssio
nal e
ngin
eerin
g pr
actic
e.
Able
to U
nder
stan
d th
e im
pact
of p
rofe
ssio
nal e
ngin
eerin
g so
lutio
ns in
soc
ieta
l an
d en
viro
nmen
tal c
onte
xts
and
dem
onst
rate
kno
wle
dge
of a
nd n
eed
for
sust
aina
ble
deve
lopm
ent
Able
to A
pply
eth
ical
prin
cipl
es a
nd c
omm
it to
pro
fess
iona
l eth
ics
and
resp
onsi
bilit
ies
and
norm
s of
eng
inee
ring
prac
tice.
Able
to C
omm
unic
ate
effe
ctiv
ely
on c
ompl
ex e
ngin
eerin
g ac
tiviti
es w
ith th
e en
gine
erin
g co
mm
unity
and
with
soc
iety
at l
arge
, suc
h as
bei
ng a
ble
to
com
preh
end
and
writ
e ef
fect
ive
repo
rts a
nd d
esig
n do
cum
enta
tion,
mak
e ef
fect
ive
pres
enta
tions
, and
giv
e an
d re
ceiv
e cl
ear i
nstru
ctio
ns
Able
to F
unct
ion
effe
ctiv
ely
as a
n in
divi
dual
, and
as
a m
embe
r or l
eade
r in
dive
rse
team
s an
d in
mul
ti-di
scip
linar
y se
tting
s.
Able
to R
ecog
nize
the
need
for,
and
have
the
prep
arat
ion
and
abilit
y to
eng
age
in in
depe
nden
t and
life
-long
lear
ning
in th
e br
oade
st c
onte
xt o
f tec
hnol
ogic
al
chan
ge.
Able
to D
emon
stra
te k
now
ledg
e an
d un
ders
tand
ing
of e
ngin
eerin
g an
d m
anag
emen
t prin
cipl
es a
nd a
pply
thes
e to
one
s o
wn
wor
k (in
clud
ing
as a
n en
trepr
eneu
r), a
s a
mem
ber a
nd le
ader
in a
team
, to
man
age
proj
ects
and
in
mul
tidis
cipl
inar
y en
viro
nmen
ts.
UNIVERSITI COURSES
Code Course Sem Credit PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
PO11 PO12
HBU111 Co-Curriculum I 1 1 HBU121 Co-Curriculum II 2 1 HBU131
Co-Curriculum III 3 1 CTU551 Tamadun Islam dan Tamadun Asia 2 2
CTU553 Hubungan Etnik 3 2 BEL422 Report Writing 4 2
BEL499 Communication and Interpersonal Skills 3 2
BAB401 Third Language 1 3 2
-
Submission to The Engineering Accreditation Council for
Accreditation of Bachelor of Mechanical Engineering
(Manufacturing) (Honours), Universiti Teknologi MARA
BAB451 Third Language 2 4 2 BAB501 Third Language 3 5 2 ENT600
Technopreneurship 6 3
Total 20 0 3 0 1 1 6 6 0 10 10 10 1
PROGRAM SERVICE COURSES
Code Course Sem Credit PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
PO11 PO12
MAT435 Calculus for Engineers 1 3 CSC430 Computer Programming
and Applications 2 3 MAT455 Further Calculus for Engineers 3 3
MAT565 Advanced Differential Equations 4 3 EPE491 Electrical Power
and Machines 3 3
Total 15 4 5 0 5 5 0 0 0 0 0 1 0
PROGRAM CORE COURSES
Code Course Sem Credit PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
PO11 PO12
MEC400 Introduction To Engineering and Problem Solving
1 3
MEC412 Engineering Statics 1 3 MEC431 Engineering Drawing 1 3
MEM460 Engineering Workshop Practice 1 2 MEC441 Fluid Mechanics I 2
3 MEC451 Thermodynamics 2 3 MEC454 Thermofluids Lab 2 1 MEC481
Materials Science 2 3 MEC411 Mechanics of Materials 3 3 MEC420
Dynamics 3 3 MEC424 Applied Mechanics Lab 4 1 MEC435 Computer-Aided
Design 4 3
-
Submission to The Engineering Accreditation Council for
Accreditation of Bachelor of Mechanical Engineering
(Manufacturing) (Honours), Universiti Teknologi MARA
MEC442 Fluid Mechanics II 4 3 MEC531 Mechanical Engineering
Design I 5 4 MEC551 Thermal Engineering 5 3 MEC554 Thermalfluids
Lab 5 1 MEC521 Vibrations 5 3 MEM560 Manufacturing Processes 5 3
MEM564 Manufacturing Processes Lab 5 1 MEC522 Control Engineering 6
4 MEC532 Mechanical Engineering Design II 6 3 MEC523 Applied
Electronics and Microprocessor 6 3 MEM575 Industrial Management 6 3
MEM603 Occupational Safety and Health 7 3 MEC500 Numerical Methods
with Applications 6 3 MEC600 Engineers in Society 7 3 MEC601 Final
Year Project I 7 2 MEC699 Industrial Training 7 4 MEC602 Final Year
Project II 8 4
Total 81 23 20 7 8 8 4 4 3 15 18 1 4
PROGRAM ELECTIVES COURSES
Code Course Sem Credit PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
PO11 PO12
MEX6YY Special Topic 1 7 3 MEX6YY Special Topic 2 8 3 MEX6YY
Special Topic 3 8 3 MEX6YY Special Topic 4 8 3
Total 12 3 3 3 0 1 0 1 0 2 2 1 0 TOTAL CREDIT 128
-
Submission to The Engineering Accreditation Council for
Accreditation of Bachelor of Mechanical Engineering
(Manufacturing) (Honours), Universiti Teknologi MARA
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
UNIVERESITY ELECTIVE COURSES 0 3 0 1 1 6 6 0 10 10 10 1 PROGRAM
SERVICE COURSES 4 5 0 5 5 0 0 0 0 0 1 0 PROGRAM COURSES 23 20 7 8 8
4 4 3 15 18 1 4 PROG ELECTIVE COURSES 3 3 3 0 1 0 1 0 2 2 1 0 TOTAL
COURSES FOR EACH PO 30 31 10 14 15 10 11 3 27 30 13 5 % COURSES FOR
EACH PO (OVERALL) /49 61.2 63.3 20.4 28.6 30.6 20.4 22.4 6.1 55.1
61.2 26.5 10.2 % COURSES FOR EACH PO (PC +4Es) /33 78.8 69.7 30.3
24.2 27.3 12.1 15.2 9.1 51.5 60.6 6.1 12.1 Nos Credit % TOTAL UEC
11 20 15.6 TOTAL PSC 5 15 11.7 TOTAL PC 29 81 63.3 4 ELECTIVES 4 12
9.4 TOTAL PC + 4 ELECTIVES 33 93 72.7 TOTAL UEC+ PSC+ PC + 4
ELECTIVES 49 128 100