1 Chapter 19. Aldehydes and Ketones: Nucleophilic Addition Reactions
1
Chapter 19. Aldehydes and Ketones: Nucleophilic Addition Reactions
2
Aldehydes and Ketones
• Aldehydes and ketones are characterized by the the carbonyl functional group (C=O)
• The compounds occur widely in nature as intermediates in metabolism and biosynthesis
• They are also common as chemicals, as solvents, monomers, adhesives, agrichemicals and pharmaceuticals
3
Naming Aldehydes and Ketones
• Aldehydes are named by replacing the terminal -e of the corresponding alkane name with –al
• The parent chain must contain the CHO group– The CHO carbon is numbered as C1
• If the CHO group is attached to a ring, use the suffix See Table 19.1 for common names
O
ethanal
O
propanal
O
2-ethyl-4-methylpentanal
4
Naming Ketones
• Replace the terminal -e of the alkane name with –one
• Parent chain is the longest one that contains the ketone group– Numbering begins at the end nearer the
carbonyl carbon
O
3-hexanone
O
4-hexen-2-one
OO
2,4-hexandione
5
Ketones with Common Names
• IUPAC retains well-used but unsystematic names for a few ketones
6
Ketones and Aldehydes as Substituents
• The R–C=O as a substituent is an acyl group is used with the suffix -yl from the root of the carboxylic acid– CH3CO: acetyl; CHO: formyl; C6H5CO: benzoyl
• The prefix oxo- is used if other functional groups are present and the doubly bonded oxygen is labeled as a substituent on a parent chain
7
Preparation of Aldehydes and Ketones
• Preparing Aldehydes• Oxidize primary alcohols using pyridinium chlorochromate• Reduce an ester with diisobutylaluminum hydride (DIBAH)
8
Preparing Ketones
• Oxidize a 2° alcohol (see Section 17.8)• Many reagents possible: choose for the specific
situation (scale, cost, and acid/base sensitivity)
9
Ketones from Ozonolysis
• Ozonolysis of alkenes yields ketones if one of the unsaturated carbon atoms is disubstituted (see Section 7.8)
10
Aryl Ketones by Acylation
• Friedel–Crafts acylation of an aromatic ring with an acid chloride in the presence of AlCl3 catalyst (see Section 16.4)
11
Methyl Ketones by Hydrating Alkynes
• Hydration of terminal alkynes in the presence of Hg2+ (catalyst: Section 8.5)
12
Oxidation of Aldehydes and Ketones
• CrO3 in aqueous acid oxidizes aldehydes to carboxylic acids efficiently
• Silver oxide, Ag2O, in aqueous ammonia (Tollens’ reagent) oxidizes aldehydes (no acid)
13
Hydration of Aldehydes
• Aldehyde oxidations occur through 1,1-diols (“hydrates”)• Reversible addition of water to the carbonyl group• Aldehyde hydrate is oxidized to a carboxylic acid by
usual reagents for alcohols
14
Ketones Oxidize with Difficulty
• Undergo slow cleavage with hot, alkaline KMnO4
• C–C bond next to C=O is broken to give carboxylic acids
• Reaction is practical for cleaving symmetrical ketones
15
Nucleophilic Addition Reactions of Aldehydes and Ketones
• Nu- approaches 45° to the plane of C=O and adds to C
• A tetrahedral alkoxide ion intermediate is produced
16
Nucleophiles
• Nucleophiles can be negatively charged ( : Nu) or neutral ( : Nu) at the reaction site
17
Other Nucleophiles
• The overall charge on the nucleophilic species is not considered
18
Relative Reactivity of Aldehydes and Ketones
• Aldehydes are generally more reactive than ketones in nucleophilic addition reactions
• The transition state for addition is less crowded and lower in energy for an aldehyde (a) than for a ketone (b)
• Aldehydes have one large substituent bonded to the C=O: ketones have two
19
Electrophilicity of Aldehydes and Ketones
• Aldehyde C=O is more polarized than ketone C=O• As in carbocations, more alkyl groups stabilize + character• Ketone has more alkyl groups, stabilizing the C=O carbon
inductively
20
Reactivity of Aromatic Aldehydes
• Less reactive in nucleophilic addition reactions than aliphatic aldehydes
• Electron-donating resonance effect of aromatic ring makes C=O less reactive electrophilic than the carbonyl group of an aliphatic aldehyde
21
Nucleophilic Addition of H2O: Hydration
• Aldehydes and ketones react with water to yield 1,1-diols (geminal (gem) diols)
• Hyrdation is reversible: a gem diol can eliminate water
22
Relative Energies
• Equilibrium generally favors the carbonyl compound over hydrate for steric reasons– Acetone in water is 99.9% ketone form
• Exception: simple aldehydes– In water, formaldehyde consists is 99.9% hydrate
23
Base-Catalyzed Addition of Water
• Addition of water is catalyzed by both acid and base
• The base-catalyzed hydration nucleophile is the hydroxide ion, which is a much stronger nucleophile than water
24
Acid-Catalyzed Addition of Water
• Protonation of C=O makes it more electrophilic
25
Addition of H-Y to C=O
• Reaction of C=O with H-Y, where Y is electronegative, gives an addition product (“adduct”)
• Formation is readily reversible
26
Nucleophilic Addition of HCN: Cyanohydrin Formation
• Aldehydes and unhindered ketones react with HCN to yield cyanohydrins, RCH(OH)CN
27
Mechanism of Formation of Cyanohydrins
• Addition of HCN is reversible and base-catalyzed, generating nucleophilic cyanide ion, CN
• Addition of CN to C=O yields a tetrahedral intermediate, which is then protonated
• Equilibrium favors adduct
28
Uses of Cyanohydrins• The nitrile group (CN) can be reduced with LiAlH4
to yield a primary amine (RCH2NH2)
• Can be hydrolyzed by hot acid to yield a carboxylic acid
29
Nucleophilic Addition of Grignard Reagents and Hydride Reagents: Alcohol Formation
• Treatment of aldehydes or ketones with Grignard reagents yields an alcohol– Nucleophilic addition of the equivalent of a carbon
anion, or carbanion. A carbon–magnesium bond is strongly polarized, so a Grignard reagent reacts for all practical purposes as R : MgX +.
30
Mechanism of Addition of Grignard Reagents
• Complexation of C=O by Mg2+, Nucleophilic addition of R : , protonation by dilute acid yields the neutral alcohol
• Grignard additions are irreversible because a carbanion is not a leaving group
31
Hydride Addition
• Convert C=O to CH-OH• LiAlH4 and NaBH4 react as donors of hydride ion• Protonation after addition yields the alcohol
32
Nucleophilic Addition of Amines: Imine and Enamine Formation
RNH2 adds to C=O to form imines, R2C=NR (after loss of HOH)
R2NH yields enamines, R2NCR=CR2 (after loss of HOH)
(ene + amine = unsaturated amine)
33
Mechanism of Formation of Imines
• Primary amine adds to C=O• Proton is lost from N and adds to O to yield a neutral
amino alcohol (carbinolamine)• Protonation of OH converts into water as the leaving
group• Result is iminium ion, which loses proton• Acid is required for loss of OH – too much acid blocks
RNH2
Note that overall reaction is substitution of RN for O
34
Imine Derivatives• Addition of amines with an atom containing a lone
pair of electrons on the adjacent atom occurs very readily, giving useful, stable imines
• For example, hydroxylamine forms oximes and 2,4-dinitrophenylhydrazine readily forms 2,4-dinitrophenylhydrazones – These are usually solids and help in characterizing liquid
ketones or aldehydes by melting points
35
Enamine Formation
• After addition of R2NH, proton is lost from adjacent carbon
CC
O
C
C
O
H++ R2NH
NH
R
C
C
HON
R
C
C
H2ON
R
C
CN
R
+ H3O+
R
H
H HH
H H
R R R
H H H
36
Nucleophilic Addition of Hydrazine: The Wolff–Kishner Reaction
• Treatment of an aldehyde or ketone with hydrazine, H2NNH2 and KOH converts the compound to an alkane
• Originally carried out at high temperatures but with dimethyl sulfoxide as solvent takes place near room temperature
37
Nucleophilic Addition of Alcohols: Acetal Formation
• Two equivalents of ROH in the presence of an acid catalyst add to C=O to yield acetals, R2C(OR)2
• These can be called ketals if derived from a ketone
38
Formation of Acetals• Alcohols are weak nucleophiles but acid promotes addition
forming the conjugate acid of C=O• Addition yields a hydroxy ether, called a hemiacetal
(reversible); further reaction can occur• Protonation of the OH and loss of water leads to an
oxonium ion, R2C=OR+ to which a second alcohol adds to form the acetal
39
Uses of Acetals
• Acetals can serve as protecting groups for aldehydes and ketones
• It is convenient to use a diol, to form a cyclic acetal (the reaction goes even more readily)
40
Nucleophilic Addition of Phosphorus Ylides: The Wittig Reaction
• The sequence converts C=O is to C=C• A phosphorus ylide adds to an aldehyde or ketone to
yield a dipolar intermediate called a betaine • The intermediate spontaneously decomposes through a
four-membered ring to yield alkene and triphenylphosphine oxide, (Ph)3P=O
• Formation of the ylide is shown below
41
Uses of the Wittig Reaction• Can be used for monosubstituted, disubstituted, and
trisubstituted alkenes but not tetrasubstituted alkenes The reaction yields a pure alkene of known structure
• For comparison, addition of CH3MgBr to cyclohexanone and dehydration with, yields a mixture of two alkenes
42
Mechanism of the Wittig Reaction
43
The Cannizzaro Reaction: Biological Reductions
• The adduct of an aldehyde and OH can transfer hydride ion to another aldehyde C=O resulting in a simultaneous oxidation and reduction (disproportionation)
44
The Biological Analogue of the Canizzaro Reaction
• Enzymes catalyze the reduction of aldehydes and ketones using NADH as the source of the equivalent of H-
• The transfer resembles that in the Cannizzaro reaction but the carbonyl of the acceptor is polarized by an acid from the enzyme, lowering the barrier
Enzymes are chiral and the reactions are stereospecific. The stereochemistry depends on the particular enzyme involved.
45
Conjugate Nucleophilic Addition to -Unsaturated Aldehydes and Ketones
• A nucleophile can add to the C=C double bond of an ,-unsaturated aldehyde or ketone (conjugate addition, or 1,4 addition)
• The initial product is a resonance-stabilized enolate ion, which is then protonated
46
Conjugate Addition of Amines
• Primary and secondary amines add to , -unsaturated aldehydes and ketones to yield -amino aldehydes and ketones
47
Conjugate Addition of Alkyl Groups: Organocopper Reactions
• Reaction of an , -unsaturated ketone with a lithium diorganocopper reagent
• Diorganocopper (Gilman) reagents from by reaction of 1 equivalent of cuprous iodide and 2 equivalents of organolithium
• 1, 2, 3 alkyl, aryl and alkenyl groups react but not alkynyl groups
48
Mechanism of Alkyl Conjugate Addition
• Conjugate nucleophilic addition of a diorganocopper anion, R2Cu, an enone
• Transfer of an R group and elimination of a neutral organocopper species, RCu
49
Biological Nucleophilic Addition Reactions
• Example: Many enzyme reactions involve pyridoxal phosphate (PLP), a derivative of vitamin B6, as a co-catalyst
• PLP is an aldehyde that readily forms imines from amino groups of substrates, such as amino acids
• The imine undergoes a proton shift that leads to the net conversion of the amino group of the substrate into a carbonyl group
50
Spectroscopy of Aldehydes and Ketones
• Infrared Spectroscopy• Aldehydes and ketones show a strong C=O peak
1660 to 1770 cm1
• aldehydes show two characteristic C–H absorptions in the 2720 to 2820 cm1 range.
51
C=O Peak Position in the IR Spectrum
• The precise position of the peak reveals the exact nature of the carbonyl group
52
NMR Spectra of Aldehydes
• Aldehyde proton signals are at 10 in 1H NMR - distinctive spin–spin coupling with protons on the neighboring carbon, J 3 Hz
53
Protons on Carbons Adjacent to C=O
• Slightly deshielded and normally absorb near 2.0 to 2.3
• Methyl ketones always show a sharp three-proton singlet near 2.1
54
13C NMR of C=O
• C=O signal is at 190 to 215 • No other kinds of carbons absorb in this range
55
Mass Spectrometry – McLafferty Rearrangement
• Aliphatic aldehydes and ketones that have hydrogens on their gamma () carbon atoms rearrange as shown
56
Mass Spectroscopy: -Cleavage
• Cleavage of the bond between the carbonyl group and the carbon
• Yields a neutral radical and an oxygen-containing cation
57
Enantioselective Synthesis
• When a chiral product is formed achiral reagents, we get both enantiomers in equal amounts - the transition states are mirror images and are equal in energy
• However, if the reaction is subject to catalysis, a chiral catalyst can create a lower energy pathway for one enantiomer - called an enantionselective synthesis
• Reaction of benzaldehyde with diethylzinc with a chiral titanium-containing catalyst, gives 97% of the S product and only 3% of the R
58
Summary• Aldehydes are from oxidative cleavage of alkenes, oxidation of 1°
alcohols, or partial reduction of esters• Ketones are from oxidative cleavage of alkenes, oxidation of 2°
alcohols, or by addition of diorganocopper reagents to acid chlorides.• Aldehydes and ketones are reduced to yield 1° and 2° alcohols ,
respectively• Grignard reagents also gives alcohols • Addition of HCN yields cyanohydrins• 1° amines add to form imines, and 2° amines yield enamines• Reaction of an aldehyde or ketone with hydrazine and base yields an
alkane• Alcohols add to yield acetals• Phosphoranes add to aldehydes and ketones to give alkenes (the
Wittig reaction) -Unsaturated aldehydes and ketones are subject to conjugate
addition (1,4 addition)