1 Arduino Board: Arduino UNO Arduino Programing Environment: Arduino 0022 Download @ //arduino.cc/en/Main/Software.

1

Arduino Board: Arduino UNO

Arduino Programing Environment: Arduino 0022Download @ http://arduino.cc/en/Main/Software

.

2

*Download Arduino Software from Arduino.cc and unzip the folder to your computer. A file within the folder called Arduino, allows you to launch the programming environment.

*You need to install a driver that comes with Arduino to be able to communicate with the board

Setup Arduino-Install the Arduino Board Drivers that come with Arduino Folder

You can use device manager to install the driver by manually giving the address of this folder

Setup Arduino-Connect Arduino to Computer via USB Port using USB Cable

Let the System Find the New Hardware

To Computer USB Port

Setup Arduino-Setting The Appropriate Arduino Port

Run Arduino, On Arduino Environment go to Tools>BoardCheck the appropriate Board

Setup Arduino-Setting The Appropriate Arduino Port

Run Arduino, On Arduino Environment go to Tools>Serial Ports Check the Port that you just found out is dedicated to USB Serial

Setup Arduino-Making Your First Circuit

Connect an LED to Pin 13 and Ground, Short leg to ground and long leg to Pin 13

To Computer USB Port

Write and Compile and Uploade your First Arduino Code

void setup(){

} pinMode(13,OUTPUT);}void loop(){ digitalWrite(13,LOW); delay(1000); digitalWrite(13,HIGH); delay(1000);

Setup Arduino-Writing Your First Arduino Code

Sparkfun Shopping Lists:

1. The short list for following physical computing workshop sessionshttp://sprkfn.com/w26434

2. The long list of possibilitieshttp://sprkfn.com/w6408