1-317-737-2933 CUSTOM STEEL FABRICATIONphoenixtank.com/wp-content/uploads/2018/07/pfe_custom-steel-fabrication-brochure.pdffabrication, landings / platforms, ladders, stairs, handrails,

CUSTOM STEEL FABRICATIONCONTACT US TODAY1-317-737-2957 | 1-317-737-2933or visit our website at www.phoenixtank.com

Surface Preparation For Fabricated SteelSubmerged Arc Welding

Davi Four Pin Plate Roll Piping Manifold

Faccin Four Pin Plate Roll Double Curvature Transition

For over 30 years, Phoenix has provided industry leading capabilities in tank fabrication. Those very same capabilities lend themselves perfectly to a wide variety of industrial steel fabrication applications available in our custom steel fabrication facilities. Phoenix is fully staffed and equipped with CNC plasma cutting tables, a variety of hydraulic presses and press brakes, and plate rolls with capacities up to 2 inches thick and 10 feet wide. We also offer both Wheelabrator and conventional blasting operations for proper surface preparation should you require shop applied primers.

Fabrication capabilities include, but are not limited to: custom plate rolling and forming, dry storage, heavy duct fabrication, landings / platforms, ladders, stairs, handrails, storage bins, racks and hoppers. Our facilities can offer design assistance and are fully staffed to handle virtually any custom steel fabrication or repetitive steel product fabrication.

Contact us today to discuss your steel fabrication needs and find out how we can serve you. We have the capability and know-how to be your custom fabricator.

Stair Fabrication

Press Brake For Plate Bending

CNC Plasma CuttingCustom Turnkey Fabrication

INDUSTRIAL FABRICATION CAPABILITIES• Four plate rolls featuring either 3 roll or 4 roll

configurations with capabilities up to 2" thick and 10' wide.

• Three hydraulic presses with capacities ranging from 100 to 300 tons, 60" X 96" working beds capable of pressing a wide variety of plate radius applications.

• Submerged Arc Welding machines for precision welding of rolled plate 24" – 120" diameter (exterior) and 48" – 144" diameter (interior).

• Three ironworkers for shearing and punching applications.

• Press brake with capacity up to 3/8" thick X 10' wide.

• Plate shear with capacity up to 1/2" thick X 8' wide.

• Angle roll capable of 3/8" X 3" X 3" hard way, rods up to 2" thick.

• Plasma cutting tables featuring 10' X 20' and 10' X 40' sizes and cutting capabilities up to 2" thick (plasma) and 3" thick (oxy fuel).

• Multitude of overhead cranes for handling virtually any steel plates for fabrication.

• Wheelabrator or Hoffman enclosed blast bay for surface preparations and climate controlled paint bays for shop applied coatings.

• Certified welding operators experienced in a variety of processes and procedures.

High Capacity Hydraulic Pressing

CUSTOM STEEL FABRICATIONSUPERIOR QUALITY, DESIGN TO DELIVERY

Silo Fabrication

CUSTOM STEEL FABRICATIONCONTACT US TODAY1-317-737-2957 | 1-317-737-2933or visit our website at www.phoenixtank.com

Surface Preparation For Fabricated SteelSubmerged Arc Welding

Davi Four Pin Plate Roll Piping Manifold

Faccin Four Pin Plate Roll Double Curvature Transition