1 © 2013 InfoComm International CTS Prep Part Two • Domain A – Provide AV Solutions • Domain B – Operate AV Solutions • Domain D – Troubleshoot AV Solutions
Dec 17, 2015
1© 2013 InfoComm International
CTS Prep Part Two
• Domain A – Provide AV Solutions• Domain B – Operate AV Solutions• Domain D – Troubleshoot AV
Solutions
2© 2013 InfoComm International
Part Two
• Domain A – – Sell AV Solutions– Conduct Vendor Selection Process– Provide AV Solutions
• Domain B – Operate AV Solutions• Domain D – Troubleshoot AV Solutions
3© 2013 InfoComm International
Sell AV Solutions
• Best Practice– Show courtesy to the client, other trades, and coworkers.
Defer jobsite questions to the project manager.– Everyone who comes into contact with clients and other
trades in the course of their work must consider themselves a salesperson for their company.
– Simple courtesy can pay off in cooperation between trades, and certainly can make a difference in the attitude of the client towards the workmanship and quality of service for which they are paying. This can mean referrals and repeat business.
Ch 25
4© 2013 InfoComm International
Sell AV Solutions
• Effective Listening• The Decision Maker• Customer Service
• A customer’s satisfaction means continued business and possible referrals. Listening to the clients' needs, working with the clients to satisfy those needs, and updating the clients on the status of their solution require highly developed customer service skills.
Ch 25
5© 2013 InfoComm International
Sell AV Solutions Exercise
Everyone in an organization who comes in contact with clients and other trades in the course of their work must consider themselves as a _____.
– salesperson – installer – designer – accountant
6© 2013 InfoComm International
Part Two
• Domain A – Sell AV Solutions– Conduct Vendor Selection Process– Provide AV Solutions
• Domain B – Operate AV Solutions• Domain D – Trouble Shoot AV Solutions
7© 2013 InfoComm International
Conduct Vendor Selection Process
• Best Practices– When the equipment is delivered,
make sure the equipment is properly received and unpacked.
– Confirm that it meets project specifications.
– Test the equipment before it is delivered to the project site.
– Collect all the accompanying documentation – warranties, instruction and owners manuals, etc. Courtesy of Crimson Tech
Ch 24
8© 2013 InfoComm International
Part Two
• Domain A – Sell AV SolutionsConduct Vendor Selection Process– Provide AV Solutions
• Domain B – Operate AV Solutions• Domain D – Troubleshoot AV Solutions
9© 2013 InfoComm International
Domain A - Provide AV Solution
• Install elements– Tools– Projector Orientation– Loudspeaker Systems– Cable Considerations– Mounting – Power
• Control Systems– Controlled Functions– User Interface– Dashboard for Controls
• Commission system– Punch-list
• Demonstrate and Test Equipment
• Create Documentation • Training
Ch 19
10© 2013 InfoComm International
Install Elements
• Create a tools checklist• Best Practice
– Each setup will require different equipment. Note the equipment needed for each job, and keep it in the job file. When you are picking up the equipment and assembling it for installation, a quick glance at the checklist will let you know everything is ready to go. If the installation is temporary, use the checklist during the strike to account for all the equipment. Ch 19 – Pg 375
11© 2013 InfoComm International
Install Elements
• Projector Orientation– Front-table– Front-ceiling– Rear-table– Rear-ceiling
• Best Practice– Check the structure for vibrations by resting your
hand on the beam or bar-joists. Sometimes the HVAC unit is mounted on the roof above, creating vibrations which will cause the image to appear unfocused.
Ch 19 – Pg 399
12© 2013 InfoComm International
Install Elements
• Loudspeakers• Point-Source and Distributed
Systems– Point Source- deliver very loud
sound coming from one location– Distributed Systems- loudspeakers
strategically suspended overhead or installed into the ceiling
13© 2013 InfoComm International
Install Elements• Cable Installation
– Raceways
• Ducts – typically rectangular – Cable tray
– Trough – aka wireway
• Conduit – tubular, solid and circular – PVC (plastic) Conduit
o Electrical Nonmetallic Tubing (ENT)
o Inner Duct o Rigid Nonmetallic Tubing
– Metal Conduito Electrical Metallic Tubing (EMT
or thin wall) o Flexible Metal Conduit (Flex)o Intermediate Metal Conduit
(IMC) o Rigid Metal Conduit (Rigid)
Ch 19 – Pg 389
14© 2013 InfoComm International
Install Elements
• Cable Installation– Permissible Areas– The certain maximum amount of space that cables should occupy
inside the conduit.• 1 Cable = 53% of conduit area
– If you are running only one cable in a conduit, that cable may occupy up to 53% of the conduit's inside area.
• 2 Cables = 31% of conduit area– If you are going to run 2 cables inside a conduit, these 2 cables may
occupy up to 31% of the conduit's inside area. • 3+ Cables = 40% of conduit area
– If you are going to run three or more cables inside a conduit, the cables may occupy up to 40% of the conduit's inside area.
15© 2013 InfoComm International
Install Elements• Cable Installation
– Signal Separation– Refers to providing physical distance among cables carrying
various signal levels• When grouping cables together in a bundle, all cables should be
intended for only one signal type. Generally, group cables according to these guidelines: – Microphone– Line and communication– Control and data– Loudspeaker– AC technical power– Video– RF
Best PracticeConsider color coding cable to help maintain separation when you are bundling cables. Color-coding requires stocking more cable, but it can speed things up with a big bundle. You should always label cables as well.
Ch 19 – Pg 386
16© 2013 InfoComm International
Install Elements• Mounting Safety Tips• Safety first!
– It is important to define the specific parts that you will be using and to use the parts that are defined. Include the following information:1) Review the size and weight of what you will be mounting, along
with all the parts and their weights. 2) Verify the location of the mounting. 3) Look at the structure to which you will be mounting, and assess
any potential problems. 4) Look at the structural designs of the room or building to ensure
safety. 5) Review all manufacturer guidelines and drawings.
– A structural engineer should review all mounting plans and advise on any difficult situations that you may encounter. When in doubt, always ask for help. If you modify another contractor’s work, you become responsible.
17© 2013 InfoComm International
Install Elements
• Mounting Safety Tips• Load Weight!
– Best Practice to multiply the published design weight by five. If a loudspeaker with mounting hardware weighs 100 lb (45kg), you should use mounting criteria that will handle 500 lb (225kg). Five is the safety factor. The term safety factor is sometimes referred to as design factor, load factor, or safety ratio.
• Remember, the weakest point in the assembly is as strong as the entire assembly can be.
• Mounting Malfunction – Shear – Tensile – Pull-out
Ch 19 – Pg 395
18© 2013 InfoComm International
Install Elements
• Mounting– Mounting is the practice of suspending or attaching
components to the structure of a building.– Fasteners
• Best Practice• It is best to get your fasteners from a reputable organization. • A local hardware store may not have grade 5 or 8 hardware in
stock
• Floor Mounting• Overhead Mounting• Wall Mounting
Ch 19 – Pg 395
19© 2013 InfoComm International
Install Elements
• Where does Power Come From?– Power generation station– High voltage transmission lines– Electric substations– Local transformer
20© 2013 InfoComm International
Install Elements
• Power on site– Service Drop– Service entrance– Electrical Service-Equipment
Entrance Panel– Main Distribution Panel– Feeders– Subpanels– Individual branch circuits– Wall outlets– Directly wired equipment
Ch 9 – Pg 166
21© 2013 InfoComm International
Install Elements
• Power requirements– Dedicated panelboards, equipment, and systems used
for the purpose of supplying one phase of AC power– Auxiliary grounding conductor– Additional requirements for AC power in AV systems -
isolated grounding systems
22© 2013 InfoComm International
Domain A - Provide AV Solution
Install elements Tools Projector Orientation Loudspeaker Systems Cable Considerations Mounting Power
• Control Systems– Controlled Functions– User Interface– Dashboard for Controls
• Commission system– Punch-list
• Demonstrate and Test Equipment
• Create Documentation • Training
23© 2013 InfoComm International
Control Systems
• Control Systems• Audio & Video Device Control Options
Ch 16 – 328 - 330
24© 2013 InfoComm International
Control Systems
• Controlled Functions– RS232– RS422– TC/IP– IR & RF
26© 2013 InfoComm International
Domain A - Provide AV Solution
Install elements Tools Projector Orientation Loudspeaker Systems Cable Considerations Mounting Power
Control Systems Controlled Functions User Interface Dashboard for Controls
• Commission system– Punch-list
• Demonstrate and Test Equipment
• Create Documentation • Training
27© 2013 InfoComm International
Domain A - Provide AV Solution
• Commission system– Punch-list– Create a punch list of changes, making corrections
immediately when possible.
• Demonstrate and Test Equipment– Explain the technical functions of each device in a
system. – Advise the client on how to use the room or system
design. – Use test patterns and signal generators.
Ch 21 – Pg 437 - 441
28© 2013 InfoComm International
Domain A - Provide AV Solution
Install elements Tools Projector Orientation Loudspeaker Systems Cable Considerations Mounting Power
Control Systems Controlled Functions User Interface Dashboard for Controls
Commission system Punch-list
Demonstrate and Test Equipment
• Create Documentation • Training
29© 2013 InfoComm International
Create Documentation
• Create documentation (user manuals, maintenance reports, etc.)
• Best Practices– Arrange equipment manuals in alphabetical
order and groups by function (an example would be all display types).
– Leave a copy of the software documentation with the equipment rack, the project manager and the client/end user.
Ch 21 – Pg 443 - 446
30© 2013 InfoComm International
Create Documentation
• Best Practices– Save all computer files associated with equipment,
especially if the files contain records of the system settings.
• It is most professional to arrange customer equipment manuals in a binder?– Alphabetically and grouped by function.– By purchase date. – Numerically by part number. – By cost.
31© 2013 InfoComm International
Domain A - Provide AV Solution
Install elements Tools Projector Orientation Loudspeaker Systems Cable Considerations Mounting Power
Control Systems Controlled Functions User Interface Dashboard for Controls
Commission system Punch-list
Demonstrate and Test Equipment
Create Documentation • Training
32© 2013 InfoComm International
Train Users
• Best Practices– Use an outline of what you are going to cover. – Study the system.
• After a project is complete, schedule a system training session with______________________ .– The client's typical users. – The client contact and architect. – The install technicians and system programmer. – The client's top executives.
Ch 21 – Pg 441-443
33© 2013 InfoComm International
Provide AV Solution
Install elements Tools Projector Orientation Loudspeaker Systems Cable Considerations Mounting Power
Control Systems Controlled Functions User Interface Dashboard for Controls
Commission system Punch-list
Demonstrate and Test Equipment
Create Documentation Training
34© 2013 InfoComm International
Part Two
Domain A – Sell AV SolutionsConduct Vendor Selection ProcessProvide AV Solutions
• Domain B – Operate AV Solutions• Domain D – Troubleshoot AV Solutions
35© 2013 InfoComm International
Operating AV solution
• Familiarize with solution functionality and operation
• Interface with user • Verify equipment is operating properly• Operate solution• Perform daily preventative maintenance• Conduct solution shut-down activities• Pack away solution
Ch 21
36© 2013 InfoComm International
Operating AV solution
• Verify equipment is operating properly• Perform daily preventative maintenance• Complete documentation (daily logs, etc.)
• As a maintenance provider, you have the potential for _________________
– all answers apply – repeat business with the company
serviced – referrals to other companies – a partnership with the customer
• If your company becomes the maintenance provider for a system, you should document ______________
– everything – when preventive maintenance is
provided – when equipment is updated – when another company's equipment
fails
37© 2013 InfoComm International
Operating AV solution
• Exercise:Compare and contrast this maintenance log with the example in your student binder. Identify improper and proper procedures and best
practices. Date Time Initials Work performed
020308 10A AJB Checked in with the on-site client before testing 1 year maintenance on Ballroom A. Tested for proper levels throughout the audio system using a meter and signal generator. All systems checked out OK. Noticed that fan in audio system rack was not operating. Recommended to client to call repair (800.123.4567) and speak with Tom for replacement. Before leaving at 3p, secured all rooms and checked out with client.
060308 8p AJB EMERGENCY CALL TODAY. Digital Signal Processor failed. Had to referernce user’s manual to get part number to replace the failed unit. Happen to have a spare device in the truck so replaced it. Reported to client status of problem. Will return to replace when part comes in. Left at 2a.
060508 8a JAR Normal tech not available today (AJB). Replaced DSP after notifying client. Had to get key from security guy to get access. Lucky break – DSP data configuration file was on USB backup pen drive! AJB left directions on how to upload Crosspoints on DSP. Verified that DSP was operating within normal parameters. No problems. Checked-out with client at Noon. Client said he was impressed with our work and has a friend who wants our company to do a retrofit install – told him I’d have sales dept. contact him.
Ch 21 – Pg 445 - 446
38© 2013 InfoComm International
Part Two
Domain A – Sell AV SolutionsConduct Vendor Selection ProcessProvide AV Solutions
Domain B – Operate AV Solutions• Domain D – Troubleshoot AV Solutions
39© 2013 InfoComm International
Troubleshoot AV Solutions
• Logical approach• Symptom recognition• List probable faulty functions• Localize the faulty function• Analyze• Failure Analysis
Ch 23