1 © 2004, Cisco Systems, Inc. All rights reserved. Frame Relay.

1© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay

222© 2004, Cisco Systems, Inc. All rights reserved.

Objectives

333© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Operation

444© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Switches

555© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Concepts

666© 2004, Cisco Systems, Inc. All rights reserved.

Virtual Circuits

777© 2004, Cisco Systems, Inc. All rights reserved.

Local Significance of DLCIs

The data-link connection identifier (DLCI) is stored in the Address field of every frame transmitted.

888© 2004, Cisco Systems, Inc. All rights reserved.

Terminology

• The connection through the Frame Relay network between two DTEs is called a virtual circuit (VC).

• Virtual circuits may be established dynamically by sending signaling messages to the network. In this case they are called switched virtual circuits (SVCs).

• Virtual circuits can be configured manually through the network. In this case they are called permanent virtual circuits (PVCs).

999© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Stack Layered Support

101010© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Functions

111111© 2004, Cisco Systems, Inc. All rights reserved.

Bandwidth and Flow Control

Bit counter Example 1

121212© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Concepts

Queue

131313© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Concepts

141414© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Concepts

151515© 2004, Cisco Systems, Inc. All rights reserved.

Star (Hub and Spoke)

Full Mesh

Partial Mesh

Selecting a Frame Relay Topology

161616© 2004, Cisco Systems, Inc. All rights reserved.

LAPF Frame – Address Field

6-bits

4-bits

171717© 2004, Cisco Systems, Inc. All rights reserved.

Data Link Control Identifier

• The 10-bit DLCI associates the frame with its virtual circuit

• It is of local significance only - a frame will not generally be delivered with the same DLCI with which it started

• Some DLCI’s are reserved

181818© 2004, Cisco Systems, Inc. All rights reserved.

Local Management Interface (LMI)

• Three types of LMIs are supported by Cisco routers:

Cisco — The original LMI extensions

Ansi — Corresponding to the ANSI standard T1.617 Annex D

q933a — Corresponding to the ITU standard Q933 Annex A

191919© 2004, Cisco Systems, Inc. All rights reserved.

LMI Frame Format

LMI MessageFlag FlagFCS

1 2 1

Address

2 1

Control

1

PD

1

CR

1

MT

202020© 2004, Cisco Systems, Inc. All rights reserved.

Stages of Inverse ARP andLMI Operation #1

212121© 2004, Cisco Systems, Inc. All rights reserved.

Stages of Inverse ARP and LMI Operation #2

222222© 2004, Cisco Systems, Inc. All rights reserved.

Configuring Basic Frame Relay

232323© 2004, Cisco Systems, Inc. All rights reserved.

Configuring a Static Frame Relay Map

242424© 2004, Cisco Systems, Inc. All rights reserved.

Reachability Issues with Routing Updates in NBMA

252525© 2004, Cisco Systems, Inc. All rights reserved.

Reachability Issues with Routing Updates in NBMA

By default, a Frame Relay network provides nonbroadcast multiaccess (NBMA) connectivity between remote sites. An NBMA environment is treated like other multiaccess media environments, where all the routers are on the same subnet.

262626© 2004, Cisco Systems, Inc. All rights reserved.

Frame Relay Subinterfaces

272727© 2004, Cisco Systems, Inc. All rights reserved.

Configuring Point-to-Point Subinterfaces

282828© 2004, Cisco Systems, Inc. All rights reserved.

Verifying Frame Relay

• The show interfaces command displays information regarding the encapsulation and Layer 1 and Layer 2 status. It also displays information about the following:

The LMI type

The LMI DLCI

The Frame Relay data terminal equipment/data circuit-terminating equipment (DTE/DCE) type

292929© 2004, Cisco Systems, Inc. All rights reserved.

The show interface Command

LMI Type

LMI DLCI

LMI Status

303030© 2004, Cisco Systems, Inc. All rights reserved.

The show frame-relay lmi Command

313131© 2004, Cisco Systems, Inc. All rights reserved.

The show frame-relay pvc Command

323232© 2004, Cisco Systems, Inc. All rights reserved.

The show frame-relay map Command

333333© 2004, Cisco Systems, Inc. All rights reserved.

Troubleshooting Frame Relay The debug frame-relay lmi Command

PVC Status0x2 – Active0x0 – Inactive0x4 – Deleted

343434© 2004, Cisco Systems, Inc. All rights reserved.

Summary