1 2 A Connect power Adapter 1. Attach the Antenna on the SNR6500 2. Take the power adapter 3. Plug the connecter into 5V – …1A port on SNR6500 4. Plug the adapter into the power outlet B Connect to Base Station 1. Take Ethernet cable 2. Connect the Ethernet cable to To Modem/PC port of the SNR6500 3. Connect the other end of the ethernet cable to a LAN port of the previously installed Wireless Base Station (LAN1-LAN4) A Insert Installation CD Place the installation CD in the CD-drive B Agree License Agreement Click Agree If this screen does not appear, start the CD manually • Open My Computer • Open CD-Drive • Open Setup.exe C Select Wireless Range Extender Click on the SNR6500 image D Start installation software Click on Install software E Getting Started Click NEXT F Time settings Click NEXT G Password Settings Click NEXT H 1. Press Scan 2. Checkmark the Enable WDS box behind your Wireless Base Station 3. Click Save Settings Connect Install Wireless Range Extender 1 2 4 WDS Settings 3 1 3 2 Install Wireless Base Station I Setting Wirless Base Station 1 Open Internet Browser 2 Enter http://192.168.1.2 in the address bar 3 Click Go. J Login Click Login (Enter password if set) K Home Network Settings • Click Home Network Settings • Click Wireless • Click WDS L • Click Scan • Checkmark the Enable WDS box behind your Wireless Range Extender • Click Save Settings WDS Settings 2
2
Embed
1 2 Connect Install Wireless Range Extender Install Wireless Base
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1 2A
Connect power Adapter
1. Attach the Antenna on theSNR6500
2. Take the power adapter 3. Plug the connecter into 5V–…1A
port on SNR65004. Plug the adapter into the power
outlet
BConnect to Base Station
1. Take Ethernet cable 2. Connect the Ethernet cable to
To Modem/PC port of theSNR6500
3. Connect the other end of theethernet cable to a LAN port ofthe previously installed WirelessBase Station (LAN1-LAN4)
A Insert Installation CD
Place the installation CD in the CD-drive
B Agree License Agreement
Click Agree
If this screen does not appear, startthe CD manually• Open My Computer• Open CD-Drive• Open Setup.exe
C Select Wireless Range Extender
Click on the SNR6500 image
D Start installation software
Click on Install software
E Getting Started
Click NEXT
F Time settings
Click NEXT
G Password Settings
Click NEXT
H
1. Press Scan2. Checkmark the Enable WDS
box behind your Wireless BaseStation
3. Click Save Settings
Connect Install Wireless Range Extender
1
2
4
WDS Settings
3
1
3
2 Install Wireless Base Station
I Setting Wirless Base Station
1 Open Internet Browser2 Enter http://192.168.1.2 in the
address bar3 Click Go.
J Login
Click Login(Enter password if set)
K Home Network Settings
• Click Home Network Settings• Click Wireless• Click WDS
L
• Click Scan• Checkmark the Enable WDS
box behind your Wireless RangeExtender
• Click Save Settings
WDS Settings
2
Wireless Range Extender SNR6500English
WelcomeQuick Start Guide
1
2
3
Connect
Install
Enjoy
Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.